RTG Parts, Parts & Accessories: JMAC CUSTOMS 10.1 INCH M-LOK HANDGUARD AND GAS TUBE

[RTGparts]

New Yugo fixed to folding adapter allows you to use an existing fixed Yugo pattern stock and convert it to folding for use in a rifle only. Fits Yugo pattern stocks such as M70, M72, OPAP, NPAP and ZPAP. Will not work with any AK unless it has an existing Yugo style stock trunnion. Consists of the patent pending adapter, our Galil style spring hinge and an existing Yugo stock trunnion adapter.

Instructions for Serbian/Yugo Fixed to Folding Stock Hinge and Adapters (For existing customer owned Fixed Serbian/Yugo Stocks)

This adapter must be mounted to both an existing rifle and existing fixed stock to open and close. It is very difficult to function as you received it.

To install:

Using the longer screw thread it through your existing stock into the female adapter that looks like a Yugo trunnion. This hardware is 5/16-24x2 Socket Head Cap Screw. If the hardware is too short or too long we recommend sourcing the correct size as long as the threading is the same. Then thread the shorter screw from the inside your rifle into the male stock adapter. This hardware is 1/4-28x7/8 Socket Head Cap Screw.

The spring is super stiff for a reason. The stiffer the spring the less play you will get but it is not easy to open and close. We recommend putting one drop of oil on the spring and working the action several times. The more use the easier it will get. Please note that with this hinge you must push/pull to both fold the stock and unfold the stock. This is mandatory for proper function of the hinge. Please do not force the stock and hinge to close into the fixed position. Doing so will void the warranty. If you close the stock without doing the push/pull you will stress the wings on the hinge to eventually chip of even break. Unfortunately, this is common with the Galil style hinges.

The factory hardware was assembled without a threadlocker. Eventually the vibration will cause the hardware to loosen. We recommend starting with a blue threadlocker first and if that doesn't hold go with a red permanent threadlocker.

SIDE FOLDING ADAPTER FOR M70 FIXED STOCKS, CRH CUSTOMS / CIRCLE 10 AK, $129.95
https://www.robertrtg.com/store/pc/S...-AK-4p9750.htm

[RTGparts]

Really nice triangle stock for your milled receiver SAM7 or similar milled AK that has upper and lower tangs. ONLY COMPATIBLE WITH A DOUBLE TANG MILLED RECEIVER.

Made in the United States, the CRH Customs Fixed Triangle Stock SAM7 / SAM5, is a triangle stock compatible with Arsenal SAM5 and SAM7 rifles. Made 100% in the USA from billet 6061 aluminum, it is MILSPEC Type II Hardcoat anodized black and has 2 QD points on each side. Length is 8.75″ and weighs 14oz. This stock is 922(r) compliant.

Comes with hardware for assembly. Use the included hardware for installation, DO NOT use regular AK stock screws

Made by CRH Customs (formerly Circle 10 AK) who has provided the American firearms community with 20 years of exceptional quality and reliability. Every CRH Customs part is designed, developed, tested and manufactured right here in the USA.

CRH Customs is expanding into several new weapons platforms so keep your eyes open for exciting new products which are coming soon.

SAM7 TRIANGLE STOCK FOR AK47 MILLED RECEIVER, CRH CUSTOMS / CIRCLE 10 AK, $149.95
https://www.robertrtg.com/store/pc/S...-AK-4p9749.htm

[RTGparts]

This tube was made specifically to match up to the Tailhook Mod 1 pistol brace ideal diameter. The Tailhook brace installs anywhere along the tube as desired. Overall length is 9 inches. This kit includes the buffer tube, buffer, spring, castle nut, end plate, and Tailhook Mod 1. Features anti rotation slot for standard end plates as well. Anodized finish. Made in the USA.

GEAR HEAD WORKS AR PISTOL BUFFER TUBE ASSEMBLY W/ TAILHOOK MOD 1, COMPLETE, $149.95
https://www.robertrtg.com/store/pc/G...ETE-6p9751.htm

[RTGparts]

SwitchSight for your Glock

Let’s talk handguns and silencers. Specifically your sights. When you’re shooting your handgun with a silencer, you want higher profile sights to see over the silencer, right? And when the silencer comes off and the gun goes back in your holster, you want lower profile sights. Current offerings force you to choose from a low profile or high profile. Now, you don’t have to choose. Dead Air Silencers and KNS Precision have teamed up to develop the new SwitchSight. They work with your current holster and optics, and provide you the freedom to choose the correct orientation based on your handgun setup. Made from durable Alloy Steel, blackNitride+ finish, and positive positioning, these sights will hold up to plenty of abuse and stay in the orientation you want them in.

Switch from standard height sights to suppressor height sights in seconds.
Features two sets of high-visibility white painted dots, designed to shoot to the same fixed point of aim.
Billet machined steel parts are nitride-finished for durability and corrosion-resistance.
Designed to be direct drop-in replacement sights for all standard Glock slides, including those with MOS red dot mounts.

KNS PRECISION / DEAD AIR GLOCK SWITCH SIGHT, $119.00
https://www.robertrtg.com/store/pc/K...T-216p9813.htm

[RTGparts]

Check in with us Monday through Friday for new parts and accessories. Scroll down to see previous ads.

Magpul Industries, PMAG, D-50, 50Rd Drum, Black, Fits HK94/MP5 Pattern Firearms

Next-generation impact, crush resistant polymer construction and corrosion resistant
Bolt hold open feature to lock the bolt back on the last round
Will seat fully loaded on a closed bolt
Ratcheting Loading Lever takes tension off the spring for easy loading by hand
Easy to disassemble for cleaning with only a flat-bladed screwdriver or similar flat-bladed tool
Anti-glare translucent window on rear of drum allows for easy determination of rounds remaining
Fits HK94, MP5, MP5SD, MP5K, SP5, SP5K, SP89 and similar HK 9mm clones
Counts as three US 922r compliance parts

Lightweight but incredibly strong, Magpul's PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for HK94/MP5 large-format pistols and pistol caliber carbines.It's unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring. They've also included a rounds-remaining rear window, a high-visibility follower and a capacity indication roller.

PMAG D-50 MP5 9MM 50RD DRUM NEW, $118.70
https://www.robertrtg.com/store/pc/P...EW-14p9797.htm

[RTGparts]

Check in with us Monday through Friday for new parts and accessories. Scroll down to see previous ads.

Magpul Industries, PMAG, D-50, 50Rd Drum, Black, Fits CZ Scorpion Evo 3, Black

Rugged construction with next-generation impact and crush-resistant polymer construction
Ratcheting loading lever for easy loading with simple disassembly for cleaning
Dependable visual features like high visibility follower tip and rounds remaining window and paint pen dot matrix
Fits CZ Evo Scorpion 3
Counts as three US 922r compliance parts

Lightweight but incredibly strong, Magpul's PMAG D-50 EV9 is a highly-reliable, 9x19mm Parabellum, 50-round drum magazine for large-format pistols and pistol caliber carbines that feed from CZ Scorpion EVO 3-pattern magazines. The D-50 EV9 features a ratcheting loading lever that removes tension from the internal spring. To keep track of your available firepower, they've included a rounds-remaining rear window and a high-visibility follower tip.

PMAG D-50 CZ SCORPION EVO 9MM 50RD DRUM NEW, $118.70
https://www.robertrtg.com/store/pc/P...EW-14p9811.htm
[/QUOTE]

[RTGparts]

JMAC CUSTOMS AB-8 1913 BRACE ADAPTER, TAN, $242.86
https://www.robertrtg.com/store/pc/J...N-106p9799.htm


JMAC CUSTOMS AB-8 1913 FOLDING STOCK, TAN, $286.06
https://www.robertrtg.com/store/pc/J...N-106p9787.htm


JMAC CUSTOMS AB-8R 1913 FOLDING BRACE ADAPTER, TAN, $247.37
https://www.robertrtg.com/store/pc/J...N-106p9770.htm


JMAC CUSTOMS AB-9 1913 FOLDING BRACE ADAPTER, TAN, $250.06
https://www.robertrtg.com/store/pc/J...N-106p9784.htm


JMAC CUSTOMS AB-9 1913 FOLDING STOCK, TAN, $293.27
https://www.robertrtg.com/store/pc/J...N-106p9780.htm


JMAC CUSTOMS AB-9R 1913 FOLDING BRACE ADAPTER, TAN, $254.57
https://www.robertrtg.com/store/pc/J...N-106p9773.htm


JMAC CUSTOMS AB-9R 1913 FOLDING STOCK, TAN, $297.77
https://www.robertrtg.com/store/pc/J...N-106p9777.htm


JMAC CUSTOMS SS-8 1913 FOLDING STOCK, TAN, $256.41
https://www.robertrtg.com/store/pc/J...N-106p9806.htm


JMAC CUSTOMS SS-8R 1913 FOLDING STOCK, TAN, $260.91
https://www.robertrtg.com/store/pc/J...N-106p9807.htm


JMAC CUSTOMS ST-6 WITH 1913 FOLDING MECHANISM, TAN, $217.71
https://www.robertrtg.com/store/pc/J...TAN-4p9798.htm
[/QUOTE]

[RTGparts]

ALG Defense, Galil Trigger, Fits Galil Ace, Approximate Pull weight 3.5lbs, Black

Compatible with Galil Ace rifles and pistols
Gun quality alloy steel

The ALG Galil Trigger is a single stage trigger based on the AKT-UL and designed for the IWI Galil Ace rifle and pistol platform. It is machined from gun quality alloy steel and utilizes a Lightning Bow. The AGT-UL features a smooth trigger that is shorter and crisper than the stock 2 stage trigger. This design is ideal for precision and target shooting. The recommended pull weight of the AGT-UL is approximately 3.5 lbs.

ALG GALIL ACE ULTIMATE TRIGGER, 3.5 POUND, $149.95
https://www.robertrtg.com/store/pc/A...ND-15p9812.htm
[/QUOTE]

[RTGparts]

LSC MP5K receiver flat with weldment kit. Same great LSC stamping, now available for the K. Comes complete with ten piece weldment kit. Everything you need to complete a correct MP5K style receiver.

LSC MP5K FLAT WITH WELD KIT, $289.95
https://www.robertrtg.com/store/pc/L...T-107p3443.htm

[RTGparts]

SUREFIRE 628LMF-B HIGH-OUTPUT LED WEAPONLIGHT FOR HK MP5 SP5 HK53, $584.00
https://www.robertrtg.com/store/pc/S...3-338p4229.htm



SUREFIRE 328LMF-B COMPACT LED WEAPONLIGHT FOR HK MP5 SP5 HK53, $584.00
https://www.robertrtg.com/store/pc/S...3-107p4228.htm

[RTGparts]

While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear,s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world's standard Vickers Combat Applications Sling(TM), a RED(TM) Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221(TM) Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket.

2.00" tubular webbing with closed cell foam
Invista solution dyed CORDURA(R) webbing
ITW GhilleTex(TM) Acetal hardware - a military grade" low IR plastic

BLUE FORCE GEAR VICKERS 2-POINT COMBAT SLING, PADDED, BLACK, $64.95
https://www.robertrtg.com/store/pc/B...ACK-8p9833.htm


BLUE FORCE GEAR VICKERS 2-POINT COMBAT SLING, PADDED, COYOTE, $64.95
https://www.robertrtg.com/store/pc/B...OTE-8p9834.htm


BLUE FORCE GEAR VICKERS 2-POINT COMBAT SLING, PADDED, MULTICAM, $64.95
https://www.robertrtg.com/store/pc/B...CAM-8p9835.htm


BLUE FORCE GEAR VICKERS 2-POINT COMBAT SLING, PADDED, BLK/MULTICAM, $64.95
https://www.robertrtg.com/store/pc/B...CAM-8p9836.htm
[/QUOTE]

[RTGparts]

JMAC CUSTOMS AB-8 BRACE ADAPTER FOR 5.5MM FOLDING AK, TAN, $179.87
https://www.robertrtg.com/store/pc/J...TAN-4p9792.htm


JMAC CUSTOMS AB-8 STOCK FOR 5.5MM FOLDING AK, TAN, $223.07
https://www.robertrtg.com/store/pc/J...TAN-4p9774.htm


JMAC CUSTOMS AB-8R BRACE ADAPTER FOR 5.5MM FOLDING AK, TAN, $184.37
https://www.robertrtg.com/store/pc/J...TAN-4p9781.htm


JMAC CUSTOMS AB-8R STOCK FOR 5.5MM FOLDING AK, TAN, $227.57
https://www.robertrtg.com/store/pc/J...TAN-4p9772.htm


JMAC CUSTOMS AB-9 BRACE ADAPTER FOR 5.5MM FOLDING AK, TAN, $187.07
https://www.robertrtg.com/store/pc/J...TAN-4p9778.htm


JMAC CUSTOMS AB-9 STOCK FOR 5.5MM FOLDING AK, TAN, $230.27
https://www.robertrtg.com/store/pc/J...TAN-4p9769.htm


JMAC CUSTOMS AB-9R BRACE ADAPTER FOR 5.5MM FOLDING AK, TAN$191.57
https://www.robertrtg.com/store/pc/J...TAN-4p9789.htm


JMAC CUSTOMS AB-9R STOCK FOR 5.5MM FOLDING AK, TAN, $234.77
https://www.robertrtg.com/store/pc/J...TAN-4p9804.htm


JMAC CUSTOMS SS-8 FOR 5.5MM FOLDING AK, TAN, $193.41
https://www.robertrtg.com/store/pc/J...TAN-4p9790.htm


JMAC CUSTOMS SS-8R FOR 5.5MM FOLDING AK, TAN, $197.91
https://www.robertrtg.com/store/pc/J...TAN-4p9791.htm


JMAC CUSTOMS ST-6 FOR 5.5MM FOLDING AK, TAN, $157.41
https://www.robertrtg.com/store/pc/J...TAN-4p9793.htm
[/QUOTE]

[RTGparts]

The Standard AK Sling was designed from the ground up to be the perfect sling for the world's most prolific small arm to match the qualities of the AK: simple, durable, functional, and economical. If you have been long dissatisfied with the issue canvas strap or can't seem to get commercial slings to fit right, this sling is for you. The Standard AK sling is what you want for your AK-47, AK-74, or other AKM Style Rifles.

We started with the Vickers Sling platform used by good guys the world over. With over 200,000 in use with the US military, the Vickers Sling with its quick adjust technology has a track record of being combat proven. Like the Vickers Sling, the Standard AK Sling can be instantly lengthened and shortened with no sling tail to get caught or parts to break. This allows close, secure weapon retention that can be carried all day, but instantly lengthened to be shouldered and fired without removing the weapon or untangling the sling. The sling can be sized to the individual, with or without body armor or other gear.

The Standard AK Sling comes with a Molded Universal Wire Loop threaded onto the front of the sling. Perfectly suited for the AK, the UWL attaches to the elongated eyelet on handguard retainer or gas block quietly and securely with nylon coated aircraft grade stainless steel cable. The UWL can also be passed through underneath the gas tube for left hand installation. The UWL is threaded on the front and can be removed for a more custom application.

The rear of the sling features two triglides to attach to buttstocks, folding stocks, wire stocks, or any other stock type.

Unique to the Standard AK Sling is the limited run of plum hardware. As a tribute to the famed Russian plum furniture and mags of the late 1980s, the plum hardware on OD and Coyote Brown slings is the finishing touch of such a unique sling.

As with all Blue Force Gear products, the Standard AK Sling is made with excellence in the USA, is Berry Compliant, and carries a limited lifetime warranty.

BLUE FORCE GEAR VICKERS AK SLING, BLK, $48.95
https://www.robertrtg.com/store/pc/V...EAR-4p5916.htm


BLUE FORCE GEAR VICKERS AK SLING, COY, $48.95
https://www.robertrtg.com/store/pc/V...EAR-4p5917.htm


BLUE FORCE GEAR VICKERS AK SLING, ODG, $48.95
https://www.robertrtg.com/store/pc/V...EAR-4p5918.htm

[RTGparts]

Limited edition Orange Lancer L5 Advanced Warfighter Magazine.

Lancer set out to engineer a better magazine; one with the reliability of steel, durability of polymer and weight of aluminum - the L5AWM. The magazine design includes a one-piece, wrap-around steel feed lip assembly and an aggressive surface texture to create the ultimate hybrid magazine tough enough for military, LE and commercial use. The internal geometry of the Advanced Warfighter Magazine is a constant curvature utilizing a non-tilting follower for reliable feeding. The body and component materials are corrosion and chemical resistant, passing military chemical testing.

Features:
Hardened Steel Feed Lips
Non-Tilt Follower
Stainless Steel Spring
Translucent Polymer
Aggressive Texturing

LANCER L5AWM 30RD ORANGE TRANSLUCENT MAG, 5.56MM / .223REM, $18.99
https://www.robertrtg.com/store/pc/L...REM-6p9862.htm

[RTGparts]

Triangle Armbar for Tailhook with 1913 Picatinny interface. Made of Delrin with steel hardware.

Tailhook sold separately.

Made by CRH Customs (formerly Circle 10 AK) who has provided the American firearms community with 20 years of exceptional quality and reliability. Every CRH Customs part is designed, developed, tested and manufactured right here in the USA.

CRH Customs is expanding into several new weapons platforms so keep your eyes open for exciting new products which are coming soon.

CRH CUSTOMS / CIRCLE 10 AK TRIANGLE ARMBAR FOR TAILHOOK WITH 1913 INTERFACE, $109.95
https://www.robertrtg.com/store/pc/T...-AK-4p9863.htm

[RTGparts]

New MP5 HK33 side folding stock assembly from AC-Unity. Includes four quick detach buttpads for a perfect fit. Numerous sling attachments offer flexibility in the field with modern slings.

Provides a solid, ergonomic shooting platform with 9mm and 5.56mm HK weapons. Fits the MP5, SP5, MP5SD, HK94, MP5K-Reverse-Stretch, HK33, HK53, HK53K, HK93 (will not fit 2-pin MP5K receivers, .22lr guns or G3 receivers)

Specifications:
Color: Black
Weight: 12.9 ounces with short buttpad.
Length of Pull: Distance from center of trigger to center of buttpad ranges from 13.9 to 14.8 Inch depending on buttpad installed.
Condition: New
Production: Made in Bosnia and Herzegovina
Fits: HK MP5, MP5SD, SP5, HK94, MP5K-Reverse Stretch, PTR9C/PTR9CT, HK33/53/93 with buffered and non-buffered bolt.
Will not fit: MP5K 2-pin receiver, 22LR clones, G3 receiver

NEW AC-UNITY MP5 HK33 FOLDING STOCK W/ FOUR BUTTPADS, $129.95
https://www.robertrtg.com/store/pc/M...Y-134p9513.htm

[BakoJ]

I ordered an RTG AC Unity stock for my PTR9CT and received it last week. Shipping was fast, the stock was as advertised. It fit well and looks and functions great. RTG is good to go!

[RTGparts]

Originally Posted by BakoJ

I ordered an RTG AC Unity stock for my PTR9CT and received it last week. Shipping was fast, the stock was as advertised. It fit well and looks and functions great. RTG is good to go!

Thank you my friend. Personally, I lived in Los Angeles most of my life but made the move to Wyoming in late 2020 for MANY obvious reasons. I got the marketing job here at RTG shortly after and one of the first things I did was convince my boss to become a vendor here on Calguns. I know you all are stuck there behind enemy lines, so to speak, so I will always do anything I can for the community.

I just couldn't take living there anymore, but you guys will ALWAYS be my community. Only people who know what the hell we go through out there will ever truly understand.

[RTGparts]

The SBT5A Pistol Stabilizing Brace is a side folding brace for your MP5, HK94, MP5-SD, POF MP5 and MP5 reverse stretch, MKE MP5RS models and the Z43P. Will fit most MP5 clones and will fit most HK33/53 style pistols and clones also.

Inspired by the iconic B&T stock for the HK MP5, the SBT5A enhances your MP5/MP5K Reverse Stretch with an integral, side-folding machined aluminum endplate.

Due to varying tolerances between roller lock manufacturers, gunsmith installation / fitting may be required.

Features:

Complete assembly, ready-to-install
Machined 6061 hard-coat anodized endplate with QD socket
Integral, side-folding mechanism
Designed to accommodate a multitude of calibers (9mm, .40S&W, .45ACP, 10mm, 5.56 NATO, 300BLK)
ATF compliant, US veteran designed and proudly made in the USA
Product includes: complete assembly, adjustable nylon strap

SBT5A Specifications

fit: HK MP5/MP5K Reverse Stretch Clones (for MP5K/SP5K purchase SB-SBT5KA )
length: 10.5 in
width [max]: 1.25 in
strap width: 1 in
weight: 14.2 ozcolor: Black

SB TACTICAL MP5 HK53 SIDE FOLDING BRACE, $199.99
https://www.robertrtg.com/store/pc/M...L-106p6115.htm

[RTGparts]

A standard magazine catch, drilled and tapped for our .375 diameter oversize button. The oversize button allows faster and easier magazine changes without shifting your grip, great for competition or speed shooting. Drop-in fit, machined from solid bar stock and heat treated for durability. Button has beautiful machine cut checkering at 40 lines per inch. Includes oversize button & screw. Fits all single stack 1911 frames. Uses existing magazine catch spring and magazine catch lock, or purchase Ed Brown rebuild kit #814 or #814-S.

A lifetime of experience in engineering, manufacturing, and precision hand craftsmanship, combined with world championship combat shooting experience, were the key ingredients in the formation of Ed Brown Products, Inc. Ed Brown firearms and components are engineered for performance, precision machined in America and hand-crafted to perfection. The instant you pick up an Ed Brown product, you can see and feel the quality, in all the details.

ED BROWN 1911 OVERSIZE MAGAZINE RELEASE, BLUED FINISH, $33.95
https://www.robertrtg.com/store/pc/E...H-188p9865.htm

[RTGparts]

Arsenal NATO length black stock set for your stamped receiver AK47, AKM or AK74.

Adds 1.25" extra length to the buttstock and thus increases the length of pull by 1.25". This is a great addition for many U.S. shooters seeking a longer stock while keeping the traditional AK look.

Black polymer color. The lower handguard includes a stainless steel heat shield. Buttstock includes a bind-free sling swivel and trap-door buttpad which can house a cleaning kit (cleaning kit sold separately, SKU: AKK-1113)

Counts as (3) U.S. 922r compliance parts. All parts are made in the USA by Arsenal.

Condition is new, unissued

ARSENAL NATO LENGTH AK STAMPED RECEIVER STOCK SET, $129.95
https://www.robertrtg.com/store/pc/A...GTH-4p4316.htm

[RTGparts]

Magpul Industries, PC Backpacker Stock, Stock, Ruger PC Carbine, OD Green.

Unique locking interface to attach the barrel assembly to the stock body when being transported
Water-resistant grip storage compartment and a second compartment in the riser section
Ergonomic M-LOK-compatible hand guard
QD sling mounting capability

The Magpul PC Backpacker Stock for the Ruger PC Carbine is the ultimate option for those wanting to bring advanced ergonomics and portability to their Ruger PC Carbine rifle. With a similar look and functionality as The X-22 Backpacker stock, it offers a minimalist solution for the hunter or outdoorsman and was designed for those who want to transport their carbine in an efficient, convenient package without compromising shooting performance or ease of deployment. The PC Backpacker is constructed of Magpul's advanced polymer, featuring an ergonomic hand guard with M-LOK slots at the 3 & 9 o'clock positions and interchangeable cheek risers to accommodate for various sighting options. The PC Backpacker stock also features an MOE SL rubber butt-pad offering an anti-slip surface that increases impact protection and is compatible with the MOE SL Enhanced Rubber Butt-Pad for an additional 3/8" LOP. Using a unique locking interface that attaches the barrel assembly to the receiver, the PC Backpacker provides an efficient solution for storage during transportation while maintaining convenient assembly from the stowed position. By including multiple QD cup mounting locations, Magpul has made it easy to carry your Ruger PC Carbine in either the broken down or assembled state with the Magpul Sling Mount Kit-Type 1 & Type 2. They've also integrated two convenient storage locations. The first is a water-resistant grip storage compartment that provides an at-hand location for a small multi-tool, survival equipment, or cleaning equipment. The second is a compartment in the riser section that's ideal for a single pistol magazine, fitting up to the PMAG 21 GL9.

MAGPUL BACKPACKER STOCK FOR RUGER PC CARBINE, OD GREEN, $142.45
https://www.robertrtg.com/store/pc/M...EN-15p9881.htm

[RTGparts]

New HK33 length black wide handguard with bipod groove! Perfect fit for your HK93, HK33, HK33K or clone. Also the perfect fit for your PTR91 that takes HK33/93 length handguards.

Includes a proper heat shield on the inside to protect your hand. The outer design/texture provides a comfortable and confident grip, with four quick disconnect sling sockets, two on the left and two on the right, for use with modern sling options.

Bipod groove for attaching standard HKG3 / HK33 style steel bipods

Both the metal and polymer these handguards are manufactured from have been in incredibly short supply since the COVID European shut down began in 2020. These will be difficult for us to keep in stock!

Specifications:
Color: Black
Weight: 9.5 ounces.
Heat Sheild: Yes
Bipod Groove: Yes
Sling Attacments: 4 QD sockets (2-Left / 2-Right)
Condition: New
Production: Made in Bosnia and Herzegovina

Fits: HK33, HK93, C93, G3K and PTR carbines/rifles using HK33 length handguards. (Some PTR's use shorter HK33/93 length handgurds and others use HK91 length. See images 11 & 12 for reference)

Like all of our AC-Unity furniture for HK; OD Green and Coyote Tan will also be available in the future.

AC-UNITY HK33 G3K BLACK WIDE HANDGUARD NEW, $79.95
https://www.robertrtg.com/store/pc/H...ITY-2p7938.htm

[RTGparts]

1913 Adapter for Stamped AKM Receiver

THIS REQUIRES REMOVAL OF THE STOCK TANG

Attach any 1913 ArmBar/Stock/ST-6 to your favorite AKM/AK74 rifle!

Our RSA-AKM Stock/Brace adapter is very unique in the way it mounts to the rifle! Ours completely replaces the factory T-Nut with our proprietary mount and is INCREDIBLY STRONG!

7075 Aluminum
Hardcoat Anodized
Includes Mounting Hardware
Weighs 3.4oz including mounting hardware

JMAC CUSTOMS RSA-AKM 1913 STOCK/BRACE ADAPTER FOR AKM STAMPED RECEIVER, $88.16
https://www.robertrtg.com/store/pc/J...VER-4p9889.htm

[RTGparts]

Colt's Manufacturing Part Number SP64028.

M16 5.56 NATO bolt carrier group complete and new in box.

Fits semi-auto or full-auto AR-15 or M16, 5.56mm, .223 or .300 AAC blackout weapons. Mil-spec production made from high pressure, magnetic particle tested steel with black parkerized finished. Includes properly staked gas key. Carrier and gas key are chromed lined.

During boom times, mil-spec parts from Colt are never available. Stock up while these limited supplies last!

COLT SP64028 M16 BOLT CARRIER GROUP NEW, $199.99
https://www.robertrtg.com/store/pc/C...W-413p6053.htm

[RTGparts]

Colt's Manufacturing Part Number SP63528. Flat Top Upper Receiver with M4 Feed Ramp, Dust Cover and Forward Assist installed.

New in box, Mil-spec quality straight from Colt!

COLT FLAT TOP UPPER W/ DUST COVER, FORWARD ASSIST, M4 FEED RAMP, $168.95
https://www.robertrtg.com/store/pc/C...P-413p7378.htm

[RTGparts]

GLOCK 17/34 OEM 9MM 17RD MAGAZINE, $21.95
https://www.robertrtg.com/store/pc/G...4-422p4120.htm


GLOCK 17/34 OEM 9MM 17RD MAGAZINE OD, $21.95
https://www.robertrtg.com/store/pc/G...D-335p7652.htm


GLOCK 17/34 OEM 9MM 17RD MAGAZINE FDE, $21.95
https://www.robertrtg.com/store/pc/G...E-335p7812.htm


GLOCK 17/34 OEM 9MM 17RD GEN5 MAGAZINE, $21.95
https://www.robertrtg.com/store/pc/G...4-422p6876.htm


GLOCK 19X/17/34 OEM 9MM 17RD MAGAZINE, $24.95
https://www.robertrtg.com/store/pc/G...4-428p6868.htm


GLOCK 19X/17/34 OEM 9MM 19RD MAGAZINE, $29.95
https://www.robertrtg.com/store/pc/G...4-428p6873.htm


GLOCK 17/19/26/34 OEM 9MM 24RD MAGAZINE, $36.50
https://www.robertrtg.com/store/pc/G...4-335p6657.htm


GLOCK 17/19/26/34 OEM 9MM 33RD MAGAZINE, $36.95
https://www.robertrtg.com/store/pc/G...4-422p9886.htm


GLOCK 17/19/26/34 OEM 9MM 33RD MAGAZINE, FDE, $36.95
https://www.robertrtg.com/store/pc/G...4-422p6863.htm


GLOCK 17/19/26/34 OEM 9MM 33RD MAGAZINE OD, $36.95
https://www.robertrtg.com/store/pc/G...4-335p7435.htm

[RTGparts]

GLOCK OEM 10MM 15RD MAGAZINE, MODEL 20 29 40, $22.95
https://www.robertrtg.com/store/pc/G...0-442p4276.htm


GLOCK OEM 10MM 10RD MAGAZINE, MODEL 29, $23.95
https://www.robertrtg.com/store/pc/G...9-443p4541.htm

[RTGparts]

We just received a large order of these and have reason to believe that this will be the last batch at this price. FYI.

German HK MP5, SP5, SP5K 30rd curved magazines. These are current production and brand new in original wrap. Stamped Made in Germany.

This MP5 30rd mag fits all HK MP5/SP5/HK94/SP89/SP5K/MP5K, MKE, BW5, SW5, CA94 and other HK 9mm clones.

ORIGINAL HK, MADE IN GERMANY

CONDITION: NEW

HK PART NUMBER 206349S

GERMAN MP5 SP5 SP5K 30RD CURVED MAG NEW, $78.95
https://www.robertrtg.com/store/pc/M...N-129p4150.htm

[RTGparts]

Swiss made B&T tri-rail Picatinny handguard for your Remington 870. If you are looking for a mil-spec quality railed handguard for your 870 this is it. B&T Switzerland has supplied these to law enforcement and military units around the world. This is the best of the best.

SPECIFICATIONS / SPECIAL FEATURES:

* Part Number: BT-21050
* Condition: Factory New
* Color: Black
* Height: 50 mm
* Length: 164 mm
* Length of Right Rail: 164 mm
* Length of Left Rail: 164 mm
* Length of Bottom Rail: 164 mm
* Width: 56 mm
* Weight: 260 g
* Material: Aluminum
* Treatment: Hardcoat Anodized
* B&T Description: B&T handguard 3x NAR (NATO Accessory Rail) for Remington 870

B&T REMINGTON 870 TRI RAIL HANDGUARD, $179.95
https://www.robertrtg.com/store/pc/B...D-454p3231.htm

[RTGparts]

AK Receiver Maintenance Block

Compatible with most AK47 and AK74 variants (minor fitting may be required)
Able to hold complete firearm for maintenance
Allows for disassembly and reassembly of bolt
High strength polymer construction
Mounting holes for attachment to bench or alternative work surface
Multiple points of contact for vice use
Weight: 8.2oz
Height: 5.25”
Length: 5.25”
Width: 1.5”
100% Made in USA

MIDWEST INDUSTRIES AK RECEIVER MAINTENANCE BLOCK, $34.95
https://www.robertrtg.com/store/pc/M...OCK-4p9906.htm

[RTGparts]

M1 GARAND 2RD CLIP NEW, $3.99
https://www.robertrtg.com/store/pc/M...W-196p7463.htm


M1 GARAND 5RD CLIP NEW, $3.99
https://www.robertrtg.com/store/pc/M...W-196p7462.htm


M1 GARAND 8RD CLIP NEW, USGI MIL-SPEC, $1.29
https://www.robertrtg.com/store/pc/M...C-196p7459.htm


10-PACK M1 GARAND 8RD CLIPS NEW, USGI MIL-SPEC, $10.99
https://www.robertrtg.com/store/pc/1...C-196p7460.htm


100-PACK M1 GARAND 8RD CLIPS NEW, USGI MIL-SPEC, $99.99
https://www.robertrtg.com/store/pc/1...C-196p7461.htm


M1 GARAND M1923 KHAKI AMMO BELT NEW, $49.95
https://www.robertrtg.com/store/pc/M...W-196p7373.htm


M1 GARAND LEATHER SLING, REPRO U.S. WWII, $22.95
https://www.robertrtg.com/store/pc/M...I-196p7330.htm

[RTGparts]

Just got these in and have very few of them...

Q SHORTY STOCK, BLK, $299.95
https://www.robertrtg.com/store/pc/Q...ACK-6p9951.htm


Q SHORTY STOCK, GRAY, $299.95
https://www.robertrtg.com/store/pc/Q...RAY-6p9954.htm

[RTGparts]

Lancer Magazine, L5 Advanced Warfighter, 223 Remington/556NATO, Fits AR Rifles, 20 Rounds, Polymer, Black

Lancer set out to engineer a better magazine; one with the reliability of steel, durability of polymer and weight of aluminum - the L5AWM. The magazine design includes a one-piece, wrap-around steel feed lip assembly and an aggressive surface texture to create the ultimate hybrid magazine tough enough for military, LE and commercial use. The internal geometry of the Advanced Warfighter Magazine is a constant curvature utilizing a non-tilting follower for reliable feeding. The body and component materials are corrosion and chemical resistant, passing military chemical testing.

LANCER L5AWM 20RD BLACK MAG, 5.56MM / .223REM, BLK, $15.99
https://www.robertrtg.com/store/pc/L...REM-6p9914.htm


LANCER L5AWM 20RD FDE MAG, 5.56MM / .223REM, FDE, $15.99
https://www.robertrtg.com/store/pc/L...REM-6p9915.htm

[RTGparts]

Brand new Midwest Industries M-LOK handguard for your HK93, HK33, G3K or similar clone. Also correct for PTR rifles using shorter HK93 length handguards

Absolute top quality MI production made right here the USA.

Professional grade one piece design
Simple installation, includes all tools
Mil-spec top rail
Extremely lightweight design, weighs only 7.1 oz with hardware
Slim 1.6 inch diameter for a great feel
Features 30 full and 2 half M-LOK slots
One five slot M-LOK compatible rail included
Constructed of 6061 aluminum, hard coat anodized for a lifetime of service
100% Made in the U.S.A., 922R Compliant
MI Lifetime Warranty
Patent pending
M-LOK is a trademark of Magpul Industries Corp

MI HK93 HK33 G3K HANDGUARD, M-LOK, $174.95
https://www.robertrtg.com/store/pc/M...K-119p5996.htm

[RTGparts]

Samson Star MP5 Handguard

Guys, these are impressively well made and ergonomic!

Looking to upgrade your Heckler & Koch MP5 or MP5 variant? This Samson two-piece MP5 handguard design clamps to the barrel trunion area and mounts easily to the front handguard mounting point. No permanent modifications to the weapon are required. Allows clearance for the charging handle as well. Get this high-quality H&K MP5 accessory (or MP5 clone accessory) today!

SAMSON STAR HK MP5 SP5 HANDGUARD, $176.13
https://www.robertrtg.com/store/pc/S...D-107p9976.htm

[RTGparts]

The XVL2-IRC Pistol & Carbine Light/Laser Module system is a paradigm shift in light and aiming laser systems. Proven technological advancements in tactical illumination are key design elements in the XVL2-IRC. Custom MaxVision Beam technology shapes the illumination beam into one that provides the optimum mix of projected illumination plus wide-angle illumination for target acquisition and situational awareness. The MaxVision Beam technology keeps the XVL2-IRC profile small and weight to a minimum to maximize the efficiency and efficacy of the warfighter.

Developed at the request of top military and law enforcement professionals
Dual LEDs deliver white light and infrared illumination for extreme versatility
Coaligned dual lasers (green and IR) for quick and easy zeroing
Virtually indestructible white-light and infrared LEDs regulated to maximize output and runtime
Integral ambidextrous momentary- and constant-on switching
Attaches securely to both Universal and Picatinny accessory rails

SPECIFICATIONS

HIGH OUTPUT - 400 lumens
HIGH RUNTIME - 1.5 hours
PEAK BEAM DENSITY - 820 candela
GREEN LASER OUTPUT - <5 millWatts (520 nm)
IR OUTPUT - 300mW / 850 nm
IR LASER OUTPUT - <.7 milliWatts (+/- 10%)
DISTANCE - 54 Meters
LENGTH - 3.0 in (7.62 cm)
SWITCHING - Ambidextrous push / toggle
BATTERIES - One 123A lithium (incl.)
BODY CONSTRUCTION - Aluminum
FINISH - Mil-Spec Hard Anodized
WEIGHT W/ BATTERIES - 5.0 oz (142 g)
BEZEL DIAMETER - 1.06 in (2.7 cm)
LIQUID INGRESS PROTECTION - IPX8 (66 feet, 2 hours)

SUREFIRE XVL2-IRC PISTOL AND CARBINE LASER / LIGHT MODULE, BLK, $1299.00
https://www.robertrtg.com/store/pc/S...BLK-8p9991.htm

[RTGparts]

Our new production HK G3 receiver flat.

This is the best quality, easiest to fold HK91-G3 receiver flat ever available. (Works perfect for CETME C builds too. Only difference between a HKG3 and CETME flat is the rib stamped into the magazine well. Functionally they are identical.)

Made on German HK tooling from steel with the correct spec and thickness. Correct dimensions, with flat rails and perfect pin holes. Deep embossing with scope tabs that are more to spec than any other G3 flat..

G3 RECEIVER FLAT, $79.99
https://www.robertrtg.com/store/pc/G...LAT-2p3995.htm


Finally, a flat built just for the CETME C with a flat sided mag well.
Made on the same German HK tooling, from steel with the correct spec and thickness, as our new production G3 receiver flats (SKU: HKK-9902), which are the best quality, easiest to fold HK91-G3 receiver flats ever available.

Correct dimensions with flat rails and deep embossing with scope tabs that are more to spec than any other flat.

CETME C RECEIVER FLAT, $79.99
https://www.robertrtg.com/store/pc/C...LAT-2p3996.htm

[RTGparts]

Samson Star HK MP5K SP5K Handguard

Fits HK MP5K. Two-piece design clamps to barrel trunion area and mounts to the front handguard mounting point. No permanent modifications to the weapon are required. Clearance for charging handle.

SAMSON STAR HK MP5K SP5K HANDGUARD, $168.34
https://www.robertrtg.com/store/pc/S...D-107p9977.htm

[RTGparts]

Samson Sig MPX 8 Inch M-LOK Handguard

The Samson narrow profile, M-LOK handguard for SIG SAUER MPX pistols and carbines is the answer for those wishing to replace their large factory Keymod handguard.

Features:
Weight: 6.35 oz
ID: 1.3"
6061 aluminum with MIL-STD Black anodizing, FDE Cerakote, or Titanium Cerakote finishes
Continuous top rail and ample M-LOK slots to put your accessories where you need them
Mounts securely to the receiver using the included mounting hardware
Made in New Hampshire USA

SAMSON SIG MPX 8 INCH M-LOK HANDGUARD, BLK, $109.39
https://www.robertrtg.com/store/pc/S...K-351p9973.htm


SAMSON SIG MPX 8 INCH M-LOK HANDGUARD, FDE, $109.39
https://www.robertrtg.com/store/pc/S...E-351p9974.htm