RTG Parts, Parts & Accessories: JMAC CUSTOMS 10.1 INCH M-LOK HANDGUARD AND GAS TUBE

[RTGparts]

AC-Unity German market AK47 30rd magazines are back, and so is our special deal on them! While supplies last we are going to sell these 30RD and the 40rd versions in 20-Packs for only $99! That’s less than $5 per mag! Load up on mags or start your own group buy, because when they're gone, they're gone!

20-PACK GERMAN MARKET AC-UNITY AK47 30RD MAGS, UNDER $5 EACH, $99.00
https://www.robertrtg.com/store/pc/2...ACH-4p8950.htm


20-PACK GERMAN MARKET AC-UNITY AK47 40RD MAGS, UNDER $5 EACH, $99.00
https://www.robertrtg.com/store/pc/2...ACH-4p9054.htm

[RTGparts]

The TL6 is a subcompact gun-mounted tactical light with integrated red aiming laser.

Designed to securely attach to the trigger guard of 18+ subcompact handguns from the following brands: GLOCK, Smith & Wesson M&P Shield, KAHR ARMS, SIG SAUER and Kimber. Using this light/laser combination on subcompact handguns allows for easier identification of potential threats before taking action.

The TLR-6 Universal Kit includes one Light/Laser module and 6 housings for use with 18+ subcompact handgun models
Features C4® LED illuminator and a 640-660nm red laser
100 lumens; 2,000 candela; 89m beam distance
Runs 1 hour (LED only or LED/laser combo); 11 hours (laser only)
Parabolic reflector produces a balance of beam and peripheral illumination; optimized electronics provide regulated intensity; red laser provides long-range targeting
Light/Laser Module designed for forward and backward compatibility
Ambidextrous switching (push-button on both sides) to access three modes: Laser only, Laser/LED combo, LED illumination only
All modes feature a 10 minute auto shut-off to conserve batteries
Batteries can be replaced while light remains mounted on gun; no need to re-sight laser after battery change
Uses two CR1/3N lithium batteries (included)
Removable cover for easy attachment/removal
Windage and elevation adjustment screws mounted in brass bushing for dependable zero retention of laser
Contoured housing securely attaches to trigger guard
Durable, impact-resistant polymer construction; IPX4 water-resistant; 1m impact resistance tested
Operating temperatures of -20°F to +120°F
Serialized for positive identification
2.30" (5.84 cm) - 2.97" (7.54 cm) depending on model
1.12 oz. (32 grams) - 1.27 oz. (36 grams) with batteries; depending on model
Limited lifetime warranty
Assembled in USA

STREAMLIGHT TLR-6 UNIVERSAL KIT, LIGHT LASER COMBO, $114.99
https://www.robertrtg.com/store/pc/S...O-338p4491.htm

[RTGparts]

Surefire 628LMF-B High-Output LED Forend WeaponLight for H&K MP5, SP5, HK94, HK53

The quintessential battle-ready 3-volt WeaponLight for Heckler & Koch platforms
1,000 lumens of output, powered by two 123A batteries
Intuitive switching won't compromise grip on the weapon
Virtually indestructible LED and TIR lens produce brilliant beam optimized for close- to medium-range applications
Ergonomic switching provides positive control of illumination with a normal firing grip
Hard-anodized aluminum body, tempered window & O-ring seals make the 628LMF-B rugged and durable

Upgrade Your Furniture. The SureFire 628LMF-B dedicated forend WeaponLights replace the original forend of your Heckler & Koch MP5 submachine gun, HK53 rifle, or HK94 carbine, and provide high-intensity illumination required to dominate a low-light tactical situation. Each features a virtually indestructible LED emitter focused by a TIR lens, producing a brilliant beam optimized for close- to medium-range applications. The 628LMF-B uses two 123A batteries to generate 1,000 lumens with a runtime of 1.25 hours. The 628LMF-B features a single momentary-on pressure-pad switch integrated into the right side of the forend and a rocker-type constant-on switch on the left side, allowing positive control of the light while maintaining your normal firing grip.

KEY ATTRIBUTES
HIGH OUTPUT: 1,000 lumens
HIGH RUNTIME: 1.25 hours
PEAK BEAM INTENSITY: 10,600 candela
BATTERIES: Two 123A lithium (incl.)
SWITCHING: Pressure pad + constant-on rocker
LENGTH: 9.48 in (24 cm)
OUTPUT
HIGH OUTPUT: 1,000 lumens
HIGH RUNTIME: 1.25 hours
DISTANCE: 200 meters
BODY
CONSTRUCTION: Polymer / aluminum
FINISH: Mil-Spec hard anodized (bezel only)
WEIGHT W/ BATTERIES: 17.6 oz (499 g)
BEZEL DIAMETER: 1.125 in (2.9 cm)
NATO STOCK NUMBER (NSN) 6230-01-519-7549

SUREFIRE 628LMF-B HIGH-OUTPUT LED WEAPONLIGHT FOR HK MP5 SP5 HK53, $584.00
https://www.robertrtg.com/store/pc/S...3-338p4229.htm

[RTGparts]

Surefire 328LMF-B. Compact LED 500 Lumen Forend WeaponLight for H&K MP5, SP5, HK94, HK53

The quintessential battle-ready compact WeaponLight for Heckler & Koch platforms
500 lumens of output from a single 123A battery
Intuitive switching won't compromise grip on the weapon
Virtually indestructible LED and TIR lens produce brilliant beam optimized for close- to medium-range applications
Ergonomic switching provides positive control of illumination with a normal firing grip
Hard-anodized aluminum body, tempered window & O-ring seals make light rugged and durable

Upgrade Your Furniture. The SureFire 328LMF-B dedicated forend WeaponLights replace the original forend of your Heckler & Koch MP5 submachine gun, HK53 rifle, or HK94 carbine, and provide high-intensity illumination required to dominate a low-light tactical situation. Each features a virtually indestructible LED emitter focused by a TIR lens, producing a brilliant beam optimized for close- to medium-range applications. The 328LMF-B generates 500 lumens of output and has a runtime of one hour on a single 123A lithium battery. The 328LMF-B features a single momentary-on pressure-pad switch integrated into the right side of the forend and a rocker-type constant-on switch on the left side, allowing positive control of the light while maintaining your normal firing grip.

KEY ATTRIBUTES
High Output: 500 lumens
High Runtime: 1 hour
Peak Beam Intensity: 7,600 candela
Batteries: One 123A lithium (incl.)
Switching: Pressure pad + constant-on rocker
Length: 8.14 in (20.6 cm)
Output
High Output: 500 lumens
High Runtime: 1 hour
Distance: 175 meters
Body
Construction: Polymer / aluminum
Finish: Mil-Spec hard anodized (bezel only)
Weight W/ Batteries: 9.6 oz (272.2 g)
Bezel Diameter: 1.125 in (2.9 cm)

SUREFIRE 328LMF-B COMPACT LED WEAPONLIGHT FOR HK MP5 SP5 HK53, $584.00
https://www.robertrtg.com/store/pc/S...3-107p4228.htm

[RTGparts]

ETS AR15 30RD SLIM MAG, CLEAR SMOKE, $12.95
https://www.robertrtg.com/store/pc/E...E-396p4476.htm


ETS AR15 30RD WITH COUPLER, CLEAR SMOKE, $12.95
https://www.robertrtg.com/store/pc/E...E-396p4475.htm

[RTGparts]

HK-AR Full-Auto Push Pin Lower from Fleming Firearms. Perfect for Push Pin lower guns needing a fresh look.

The HK-AR lower works with your standard HK trigger pack but uses an AR grip and AR trigger guard. Now you can choose from a huge selection of AR grips to build a rifle that is truly perfect for you.

We have added several popular U.S. made AR grips and trigger guards including: Magpul MIAD, Hogue, Ergo Ambi Sure Grip and Ergo Ambi Tactical Deluxe (PSG-1 Style with palm shelf).

SPECIFICATIONS / SPECIAL FEATURES:
* Uses HK Trigger Pack and HK Selector Lever (long axis like for plastic lowers).
* Uses AR15 style grip and trigger guard.
* Weight: 6.9 ounces.
* Hard Anodized to a Rockwell 35 Hardness.
* Works on all HK 9X series rifles and clones.
* Works with all semi-auto and NFA transferable trigger packs.
* Covered by Fleming Firearms lifetime warranty against defect or breakage (though you will never need it...it's there just in case).

FLEMING HK-AR PUSH PIN FULL-AUTO LOWER, $189.00
https://www.robertrtg.com/store/pc/F...WER-2p1933.htm

[RTGparts]

No shotgun should have a plastic magazine follower! Steel followers are far more reliable in dirty conditions. More reliable when you need the gun most.

The GG&G Benelli Follower for the Benelli M1, M2, M3, and M4 12 gauge shotguns is an enhanced follower manufactured with the Benelli Tactical Shotgun Shooter in mind. Installs just like the factory Benelli follower. No modification to the shotgun required.

Easy to install.
Better control of spring movement.
Increased reliability in dirty conditions.
Made from stainless steel.
Corrosion and wear resistant.
Made in the USA!

GG&G BENELLI M1 M2 M3 M4 STAINLESS STEEL FOLLOWER, $27.95
https://www.robertrtg.com/store/pc/G...ER-15p7356.htm

[RTGparts]

No shotgun should have a plastic magazine follower! Steel followers are far more reliable in dirty conditions. More reliable when you need the gun most.

The GG&G Benelli Follower for the Benelli M1, M2, M3, and M4 12 gauge shotguns is an enhanced follower manufactured with the Benelli Tactical Shotgun Shooter in mind. Installs just like the factory Benelli follower. No modification to the shotgun required.

Easy to install.
Better control of spring movement.
Increased reliability in dirty conditions.
Made from stainless steel.
Corrosion and wear resistant.
Made in the USA!

GG&G BENELLI M1 M2 M3 M4 STAINLESS STEEL FOLLOWER, $27.95
https://www.robertrtg.com/store/pc/G...ER-15p7356.htm

[RTGparts]

MKE MP5 30rd curved steel magazine. Brand new condition. Great magazine for your German HK, POF, MKE, PTR or other MP5/SP5/MP5K/SP5K style clone.

Made by MKE in Turkey, a licensed HK manufacturer. Produced to exact HK specifications on HK equipment using 100% German spec materials.

This MP5 30rd mag fits all HK MP5/HK94/SP89/MP5K/SP5K, MKE, Zenith ZR5RS, POF MP5/MP5RS, BW5, SW5, CA94 and other HK 9mm clones.

MKE MP5 30RD STEEL MAGAZINE NEW, $49.99
https://www.robertrtg.com/store/pc/M...EW-14p2246.htm

[RTGparts]

SCAR 17S 13-Inch Barrel Assembly
FN Part Number: 98814
Condition: New in Box.
In Stock: For those who have asked. If you can add an item to the shopping cart then it is in stock at our warehouse.

FN American, barrel assembly, .308 Rem / 7.62 NATO, 13 Inch, 1:7 twist, fits SCAR 17S and includes barrel, front sight assembly, gas block / regulator, gas piston and flash hider.

The FN SCAR barrel assemblies are cold hammer-forged, chrome-lined MIL-SPEC steel barrels with front sight assembly, gas block assembly, gas regulator, gas piston and flash hider installed. Available in short lengths for reduced weight, fast handling and confined space maneuvering; standard lengths for replacement of existing barrels; and long lengths for increased velocity and extended range capability. Assemblies can be easily installed by the user with a Torx T25 and 62 In Lb torque wrench and are ready to shoot without headspacing.

FN SCAR 17S 13 INCH BARREL ASSEMBLY, $1149.00
https://www.robertrtg.com/store/pc/F...LY-15p4632.htm

[RTGparts]

Genuine factory 25rd magazine for your .22LR MP5. Made in Germany. New in wrap.

HK MP5 .22LR 25RD MAGAZINE, $26.99
https://www.robertrtg.com/store/pc/H...EW-12p9131.htm

[RTGparts]

PMAG 20RD AR/M4 GEN M3 .300 BLACKOUT, $14.20
https://www.robertrtg.com/store/pc/P...OUT-6p9136.htm


PMAG 30RD AR/M4 GEN M3 .300 BLACKOUT, $15.15
https://www.robertrtg.com/store/pc/P...OUT-6p7653.htm

[RTGparts]

Arsenal Bulgaria AK 5.45x39mm 45rd black polymer magazine. This 5.45 magazine is typical high-quality Bulgarian circle ten production made with steel reinforcements on the rear lug, front lug and front spine.

Weighs just 9.1 ounces.

Made in Bulgaria with Circle Ten proof.

AK74 5.45MM 45RD MAG BLACK, BULGARIAN CIRCLE 10, $94.95
https://www.robertrtg.com/store/pc/A...0-151p4342.htm

[RTGparts]

In addition to offering superior compensation characteristics, PWS FSC Series provides enough flash suppression to keep the flash out of your optics and line of sight. Designed for both competitive and tactical use, the FSC Series allows for superior muzzle stabilization and aids the shooter in faster follow-up shots and accuracy.

PWS MOD 2 FSC47 FLASH SUPPRESSING MUZZLE COMPENSATOR, 14x1 LH, AK47, 7.62MM, $79.95
https://www.robertrtg.com/store/pc/P...2MM-4p4344.htm

[RTGparts]

Sig Sauer, ROMEO-MSR COMBO KIT in Black & Flat Dark Earth (FDE). Includes Romeo MSR red dot and Juliet3 micro 3x magnifier. Absolute co-witness height with push button flip to side magnifier mount.

Outstanding quality at a great value from a name you can trust.

Military inspired design offering advanced electronic technologies providing maximum clarity, accuracy and performance.

SIG ROMEO-MSR WITH JULIET3 MICRO MAGNIFIER COMBO KIT, FDE, $249.99
https://www.robertrtg.com/store/pc/S...FDE-8p9143.htm


SIG ROMEO-MSR WITH JULIET3 MICRO MAGNIFIER COMBO KIT, BLK, $249.99
https://www.robertrtg.com/store/pc/S...KIT-8p8167.htm

[RTGparts]

Sig Sauer, Romeo 8 Red Dot Sight, Ballistic Circle Dot, 1X38mm, 68MOA & 2MOA, .5 MOA Adjustment, With Solid Lens Covers and 1/2 Hex Bolt Mount, No Shroud, Black Finish

Advanced electronic technologies
Military-inspired designs
Maximum clarity, accuracy and performance

No one understands the need for uncompromising accuracy better than SIG SAUER. SIG has developed truly game-changing optics for all types of shooters: military, law enforcement, hunters and competitive shooters.

SIG ROMEO8 RED DOT SIGHT, BALLISTIC CIRCLE DOT, 1x38MM, 68MOA & 2MOA, NO SHROUD, $499.99
https://www.robertrtg.com/store/pc/S...OUD-8p9144.htm

[RTGparts]

FN American, barrel assembly, .223 Rem / 5.56 NATO, 14 Inch, 1:7 twist, fits SCAR 16S and includes barrel, front sight assembly, gas block / regulator, gas piston and flash hider.

The FN SCAR barrel assemblies are cold hammer-forged, chrome-lined MIL-SPEC steel barrels with front sight assembly, gas block assembly, gas regulator, gas piston and flash hider installed. Available in short lengths for reduced weight, fast handling and confined space maneuvering; standard lengths for replacement of existing barrels; and long lengths for increased velocity and extended range capability. Assemblies can be easily installed by the user with a Torx T25 and 62 In Lb torque wrench and are ready to shoot without headspacing.

FN SCAR 16S 14 INCH BARREL ASSEMBLY, $999.00
https://www.robertrtg.com/store/pc/F...LY-15p8379.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com

[RTGparts]

CLOUD DEFENSIVE OWL 1250 LUMENS WEAPON LIGHT, OD GREEN, $399.99
https://www.robertrtg.com/store/pc/C...EEN-6p9203.htm


CLOUD DEFENSIVE OWL 1250 LUMENS WEAPON LIGHT, FDE, $399.99
https://www.robertrtg.com/store/pc/C...FDE-6p9204.htm


CLOUD DEFENSIVE OWL 1250 LUMENS WEAPON LIGHT, GRAY, $409.99
https://www.robertrtg.com/store/pc/C...RAY-6p9205.htm


CLOUD DEFENSIVE OWL 1250 LUMENS WEAPON LIGHT, MULTICAM, $409.99
https://www.robertrtg.com/store/pc/C...CAM-6p9200.htm


CLOUD DEFENSIVE OWL 1250 LUMENS WEAPON LIGHT, CALLAHAN CAMO, $409.99
https://www.robertrtg.com/store/pc/C...AMO-6p9201.htm


CLOUD DEFENSIVE OWL 1250 LUMENS WEAPON LIGHT, BAZOOKA GREEN, $409.99
https://www.robertrtg.com/store/pc/C...EEN-6p9202.htm

[RTGparts]

Magpul Industries, PRS GEN3 Precision-Adjustable Stock, Fully Adjustable, Fits AR-15/AR-10

Machined aluminum LOP and Cheek Piece adjustment knobs
Steel adjustment shafts finished with Melonite
Bottom M-LOK slots for sling or monopod

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK slots on the bottom for rear monopod mounting. Made in U.S.A.

MAGPUL PRS GEN3 PRECISION-ADJUSTABLE STOCK FOR AR15/AR10, BLACK, $242.20
https://www.robertrtg.com/store/pc/M...ACK-6p9256.htm


MAGPUL PRS GEN3 PRECISION-ADJUSTABLE STOCK FOR AR15/AR10, FDE, $242.20
https://www.robertrtg.com/store/pc/M...FDE-6p9257.htm


MAGPUL PRS GEN3 PRECISION-ADJUSTABLE STOCK FOR AR15/AR10, GRAY, $242.20
https://www.robertrtg.com/store/pc/M...RAY-6p9258.htm


MAGPUL PRS GEN3 PRECISION-ADJUSTABLE STOCK FOR AR15/AR10, ODG, $242.20
https://www.robertrtg.com/store/pc/M...ODG-6p9259.htm
[/QUOTE]

[RTGparts]

2-pack of genuine Ruger factory magazines with Ruger logo. Has been tested and has proven to feed as reliably as the standard BX-1 10-round Ruger rotary magazine. BX-25 magazines will work with any factory original 10/22 Rifle, SR-22 Rifle, 22 Charger Pistol, .22 LR Ruger American Rimfire Rifle and .22 LR Ruger 77/22 Rifle.

2-PACK RUGER 10/22 25RD MAGAZINE NEW, BX-25, $39.99
https://www.robertrtg.com/store/pc/2...25-14p9263.htm

[RTGparts]

UTG PRO AK47 low profile 19-slot picatinny scope mount and rear sight. This quick detach rail is windage adjustable and manufactured from aircraft grade aluminum for ultra light weight and durability. Matte black anodizing ensures wear resistance and a great look on most any AK.

Details:
Proudly designed and made in the USA
Fits with Romanian, Chinese, Bulgarian, Russian and U.S. AKs with fixed stocks.
innovative 3-point modular and adjustable locking system for optimal low profile and secure fit.
integrated backup rear iron sight with precision windage adjustment
clever, quick detach, flip-open design for easy cleaning.
weighs just 5.7 oz.
Does not work on milled receivers with slanted rear upper tang.

AK47 QD LOW PROFILE RAIL AND SIGHT, UTG-PRO USA, $74.95
https://www.robertrtg.com/store/pc/A...USA-4p3908.htm

[RTGparts]

2-pack of genuine Ruger factory magazines with Ruger logo. Has been tested and has proven to feed as reliably as the standard BX-1 10-round Ruger rotary magazine. BX-25 magazines will work with any factory original 10/22 Rifle, SR-22 Rifle, 22 Charger Pistol, .22 LR Ruger American Rimfire Rifle and .22 LR Ruger 77/22 Rifle.

2-PACK RUGER 10/22 25RD MAGAZINE NEW, BX-25, $39.99
https://www.robertrtg.com/store/pc/2...25-14p9263.htm

[RTGparts]

When you want idiot proof, reliable mounting of accessories, Picatinny still rains supreme.

Bravo Company, Quad Rail, Picatinny Rail, Fits AR Rifles, 12", Flat Dark Earth (FDE)

This FDE version is a limited run of the QRF 12" handguard.

Steel Barrel Nut to resist movement under heat
1.3" inside diameter
2.12" wide
Actual length is 12.62"

Bravo Company's BCM QRF-12 (Quad Rail Free Float Handguard) features the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard. The QRF Series of handguards gives the shooter modularity in the picatinny (MIL-STD-1913) platform. Includes T, L, R, and B recoil slot markings on all four rails to aid in repeatable set up for the end user. This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. The free float quad rail eliminates loads from barrel, reducing the deflection for more accurate shooting. Its proprietary engineered profile offers additional cross sectional strength. Includes 4 QD Sing Swivel Sockets, (limited rotation).

BRAVO COMPANY BCM QRF-12 PICATINNY QUAD RAIL 12", FDE, $189.95
https://www.robertrtg.com/store/pc/B...FDE-6p9287.htm

[RTGparts]

German HK USP 9mm 18rd magazine. These are made to work with HK USP Jet-Funnels however they fit and function perfect in all HK USP 9mm full size pistols. Without the Jet-Funnel, they will extend past the grip.

ORIGINAL HK, MADE IN GERMANY

CONDITION: NEW

HK PART NUMBER 215124s

HK USP 9MM 18RD EXPERT MAGAZINE NEW, GERMAN, $49.95
https://www.robertrtg.com/store/pc/H...N-228p6023.htm

[RTGparts]

Sig Sauer, Romeo 8 Red Dot Sight, Ballistic Circle Dot, 1X38mm, 65MOA & 2MOA, .5 MOA Adjustment, With Lens Covers and 1/2 Hex Bolt Mount, Titanium Protective Shroud, Flat Dark Earth Finish (FDE

Advanced electronic technologies
Military-inspired designs
Maximum clarity, accuracy and performance

No one understands the need for uncompromising accuracy better than SIG SAUER. SIG has developed truly game-changing optics for all types of shooters: military, law enforcement, hunters and competitive shooters.

SIG ROMEO8T BALLISTIC CIRCLE RED DOT, 2MOA, TITANIUM SHROUD, FDE, $609.99
https://www.robertrtg.com/store/pc/S...FDE-8p9291.htm

[RTGparts]

The Timney Enhanced Feel Trigger Shoe answers the call for a trigger shoe that enhances the overall feel of the trigger break by making the trigger feel more comfortable and predictable. The Timney Trigger Shoe matches the historic reliability of the Glock system by providing an improved trigger feel that does not sacrifice Glock's integrity. With added benefits, such as an adjustable safety take-up (movement), the Timney Enhanced Trigger Feel Shoe allows the user to become more accurate with their pistol.

The Timney Enhanced Trigger Shoe for Glock pistols was engineered and designed to fit all models, from sub-compacts to large frame handguns. The shoe is machined from aluminum and then anodized to create a durable, corrosion-resistant, easy-to-maintain enhanced trigger feel option for Glock pistols.

Keeping up with Timney's honored commitment to listening to their customers, the trigger can be installed easily with no gunsmith needed.

The Timney Enhanced Feel Trigger Shoe for Glocks is backed by the legendary Timney No Hassle, Lifetime Warranty, and is being originally offered in a curved trigger shoe model.

TIMNEY TRIGGERS ALPHA COMPETITION TRIGGER FOR GLOCK GEN5 G17 G19 G34, $149.99
https://www.robertrtg.com/store/pc/T...4-335p9300.htm

[RTGparts]

MIDWEST INDUSTRIES CZ SCORPION 4.25" M-LOK HANDGUARD, $149.95
https://www.robertrtg.com/store/pc/M...D-171p9307.htm


MIDWEST INDUSTRIES CZ SCORPION 6.75" M-LOK HANDGUARD, $159.95
https://www.robertrtg.com/store/pc/M...D-171p9306.htm

[RTGparts]

A low-profile, left side-folding triangle design compatible with all platforms utilizing an M1913 (Picatinny) interface at the rear of the receiver. The TF1913 is a complete assembly offering pull-through opening and a solid lock-up when extended.

Features:
Complete assembly, ready-to-install
Advanced steel hinge design locks in both folded and extended positions
Pull-through design offering quick deployment
Rigid polymer substrate with flexible arm cuff
US veteran designed and proudly made in the USA

Product Includes:
Complete assembly
Adjustable nylon strap

TF1913 Specifications
fit: Platforms with M1913 interface at rear of receiver (SIG MPX, SIG MCX, SIG Rattler, Rock River LAR-PDS, etc.)
length: 9.5
weight: 10.9 oz
width [max]: 1"
strap width: 1"
color: Black

TS1913 TRIANGLE FOLDING BRACE FOR PICATINNY, SB TACTICAL, $159.99
https://www.robertrtg.com/store/pc/T...CAL-4p9296.htm
[/QUOTE]

[RTGparts]

Easy installation
Made to fit IWI US UZI Pro firearms
Constructed from Hard Coat Anodized 6061 Aluminum
Adds section of picatinny rail to back of receiver for stocks, arm braces, and sling adaptors
Made in the USA

MIDWEST INDUSTRIES UZI PRO STOCK ADAPTER, $49.95
https://www.robertrtg.com/store/pc/M...ER-22p9301.htm

[RTGparts]

AC-Unity AR15 Mil-Spec buttstock with three rubber buttpads. Buttpads are quick detach and can be swapped out in a couple of seconds.

Originally developed for the AC-SMG carbine. This buttstock is rugged, lightweight and user friendly. Offers great quality construction, thoughtful design and a solid, confidence inspiring feel not found in most stocks of similar weight (no rattles or creaks!).

Made from an advanced, German made polymer-resin/granulate that is light weight and extremely shock resistant. This stock is impact resistant through a wide range of temperatures.

Four steel QD attachment points, two on each side, offer great sling flexibility. Removable buttpad system. Buttpad's surface area measures 5.4 x 1.735 Inch at its widest point. Provides optimal feel and stability on the shoulder. A fantastic Mil-Spec stock option for all AR 5.56, 7.62 and SMG carbines.

Lifetime warranty against defect.

Specifications:

Weight: 11.4 ounces.
Includes 3 quick change buttpads
Length 7.2 Inch
Height: 5.4 Inch
Width (max): 1.735
Color: Black
Condition: New
Production: Made in Bosnia and Herzegovina

AC-SMG AR15 M4 MIL-SPEC BUTTSTOCK W/ 3 BUTTPADS, AC-UNITY, $44.95
https://www.robertrtg.com/store/pc/A...Y-395p7930.htm

[RTGparts]

Sealed 10-pack of new in wrap Rheinmetall G3 20rd aluminum magazines. Rheinmetall produced the very best quality G3 rifles and parts; these mags are no exception.

Will fit and function in all HK91, HKG3, PTR91 and clones.

Only a few in stock.

NEW IN BOX 10-PACK RHEINMETALL G3 20RD ALLOY MAGS, $169.50
https://www.robertrtg.com/store/pc/N...AGS-2p6484.htm

[RTGparts]

2-Pack, Ruger, Magazine, 9MM, 12 Rounds, Fits Ruger Security-9, Steel, Black

Two pack of the best quality and most reliable magazines available for your Ruger Security-9

2-PACK OF RUGER SECURITY-9 9MM 17RD MAGAZINE NEW, $46.95
https://www.robertrtg.com/store/pc/2...EW-14p9309.htm

[RTGparts]

US Palm, Pistol Grip, fits AK-47/AK-74/AKM/PKM, Grip Screw & Washer included.

922R Compliant
Made in USA

The US PALM AK Grip delivers more control through an ergonomic, ultimately more comfortable design.

US PALM AK47/74 PISTOL GRIP NEW W/ SCREW, BLACK, $14.95
https://www.robertrtg.com/store/pc/U...ACK-4p9316.htm


US PALM AK47/74 PISTOL GRIP NEW W/ SCREW, BAKELITE ORANGE, $14.95
https://www.robertrtg.com/store/pc/U...NGE-4p9317.htm

[RTGparts]

HK USP45 extended baseplate for 12rd preban, no-ban and LEO mags (not available for 10rd). Extended baseplates provide a more secure grip which helps controlability during rapid fire. Also the larger grip area is great for large hands.

HK USP .45 EXTENDED FLOOR PLATE, $7.00
https://www.robertrtg.com/store/pc/H...TE-12p2376.htm

[RTGparts]

GG&G BERETTA 1301 +2 MAGAZINE TUBE EXTENSION WITH BARREL CLAMP, $119.99
https://www.robertrtg.com/store/pc/G...P-454p9322.htm


GG&G BERETTA 1301 LOOPED SLING AND FLASHLIGHT MOUNT, $31.75
https://www.robertrtg.com/store/pc/G...T-332p9323.htm


GG&G BERETTA 1301 SHOTGUN QUICK DETACH SLING AND FLASHLIGHT MOUNT, $41.00
https://www.robertrtg.com/store/pc/G...T-332p9324.htm


GG&G BERETTA 1301 FOLLOWER, $32.00
https://www.robertrtg.com/store/pc/G...R-454p9325.htm

[RTGparts]

-Installs on GI barrel nut (not included with handguard)
-Monolithic continuous top rail
-Five anti-rotation QD sockets for push button swivels
-Lightweight with extremely solid lock up
-Constructed from Hard Coat Anodized 6061 Aluminum
-Extends past the front sight tower to allow additional space for mounting accessories
-Overall length: 12.625”
-Width: 1.840”
-Height: 2.17”
-Weight: 10.2 oz
-Made in the USA

MIDWEST INDUSTRIES 2-PIECE CARBINE FULL-LENGTH FREE FLOAT M-LOK HANDGUARD, $234.95
https://www.robertrtg.com/store/pc/M...ARD-6p9348.htm

[RTGparts]

-Attaches to AK rifles with standard AKM receiver rail interface
-Puts optic on center or extremely close to center of the top cover on mil-spec built AK rifles
-Modular top piece allows the top to be changed to a different configuration later if desired
-Constructed from hard coat anodized 6061 aluminum
-Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking
-Weight 7.4 oz
-100% Made in U.S.A., with MI Lifetime Warranty

MIDWEST INDUSTRIES GEN 2 AK77/74 OPTIC MOUNT, $159.95
https://www.robertrtg.com/store/pc/M...UNT-4p9351.htm

[RTGparts]

Choate SKS side folding stock assembly with pistol grip. Brand new assembly from Choate. Great upgrade for your SKS

CHOATE SKS M4 SIDE FOLDING STOCK WITH PISTOL GRIP, $129.95
https://www.robertrtg.com/store/pc/S...TE-15p9357.htm

[RTGparts]

Polish Tantal quick detach bipod new in wrap. This spring loaded bipod attaches to the Tantal flash hider. Will also work on most other AKs. Original Polish military production.

TANTAL BERYL BIPOD NEW IN WRAP, $24.95
https://www.robertrtg.com/store/pc/T...RAP-4p1745.htm

[RTGparts]

Designed for 34mm & 35mm scopes
The smoothest-functioning QD lever on the market
Superior clamping that will not damage or coin the rail surface
Extremely smooth operation
Multi-faceted adjustment nut to get the exact tension required by the operator
Fully adjustable with no tools required
Can be adjusted to fit rails not machined to Mil-Spec tolerances
Weighs only 9.3 oz.
Precision machined for optimum return-to-zero performance and reliability
Hard Coat Anodized 6061 Aluminum for a lifetime of service
Patented QD lever by Elite Defense
Made in the USA
Lifetime warranty
Technical Specs
Works with scopes with up to a 56mm objective
Weight: 9.3 oz
Overall length: 5.875 in.
Width of rings: 0.850 in.
Distance between rings: 2.800 in.
Offset from the first ring: 1.500 in.
Distance - top of rail to center line of ring: 1.930 in.

MIDWEST INDUSTRIES HIGH QD 34MM SCOPE MOUNT W/ 1.5 INCH OFFSET, $194.95
https://www.robertrtg.com/store/pc/M...SET-8p9345.htm


MIDWEST INDUSTRIES HIGH QD 35MM SCOPE MOUNT W/ 1.5 INCH OFFSET, $194.95
https://www.robertrtg.com/store/pc/M...SET-8p9346.htm