RTG Parts, Parts & Accessories: GLOCK OEM 34 GEN5 BARREL 5.31" 9MM, NEW $179.95

[RTGparts]

Columbia River Knife & Tool, Pry Cutter Keychain Tool, Silver, Bead Blasted Finish, 2CR13 Steel, Cord Cutter, Pry Bar, Bottle Opener, Hex Wrenches, PH1 Bit

Great little tool for anyone's key-chain.

Ultimate Durability: Stainless steel handle withstands hard use
Useful Utility: Replaceable cord cutter
Multi-Use: Pry bar section can tackle utility tasks
Convenient: Bottle opener for your favorite beverage
Useful Utility: 1/4", 5/16", 3/8" hex wrenches built into the tool
Versatile Utility: Multi-position o-ring secured PH1 hex bit

This compact keychain multitool is small enough to take with you everywhere; a utilitarian solution to jobs on the go. Part of Joe Wu's Scout Tools collection, the Pry Cutter Keychain Tool features several key components from a cord cutter to a bit driver tool, making it as essential as the keys you carry with it.


CRKT PRY CUTTER KEYCHAIN MULTI-TOOL 2.61" $15.99
https://www.robertrtg.com/store/pc/C...ot-8p10950.htm


Thanks for looking and happy shooting!

[RTGparts]

The new Alpha Series parts from Midwest Industries are here! They are in stock and selling fast. If you don't manage to snag one while they are in stock, be sure to join the waitlist! We will have more soon!

MIDWEST INDUSTRIES ALPHA SERIES FOLDING STOCK $274.95
https://www.robertrtg.com/store/pc/M...CK-4p10965.htm


MIDWEST INDUSTRIES AK47/AK74 ALPHA SERIES 10.0 INCH M-LOK HANDGUARD $219.95
https://www.robertrtg.com/store/pc/M...RD-4p10966.htm


MIDWEST INDUSTRIES AK47/AK74 ALPHA SERIES 6 INCH M-LOK HANDGUARD $189.95
https://www.robertrtg.com/store/pc/-...RD-4p10967.htm



Thanks for looking and happy shooting!

[RTGparts]

Introducing the NEW M-Lok Handguard from JMAC Customs. This handguard is part of a modular system that will allow you to personalize your firearm to fit your needs, whether that be professional, competitive, or recreational. Choose between several lower handguard lengths, as well as upper options to include optic mounts, railed dust covers and monolithic railed dust covers (coming soon). From the range to the field the M-Lok Handguard from JMAC Customs has you covered.

The M-Lok Handguard from JMAC Customs was painstakingly designed to retain the highest level of accuracy by creating a mounting block that clamps to your barrel near the receiver. There are no additional points of contact from the mounting block to the end of your muzzle. This allows your barrel to move freely causing no negative effects to your barrel harmonics. The lower half of the mounting block is machined from 7075-T6 aluminum alloy, the upper half is machined from a 4041 QPQ steel alloy. The use of a steel alloy in the upper half of the mounting block allows for a rock solid foundation for the system which will maintain your zero and stand up to abuse for thousands upon thousands of rounds.

The unique design of the mounting block allows the M-Lok Handguard to be installed on most kalashnikov pattern firearms, regardless of the receiver type. Available in several lengths, with and without the lower handguard retainer cutout. The M-Lok Handguard does not require the JMAC Customs railed gas tube for installation. Can be installed in conjunction with a standard AKM upper handguard.

Product Highlight

Easy to measure length! Simply measure from the receiver towards the muzzle to know how the lower hand guard fits
4 Piece Design with 4140 steel threaded upper clamp
5 2/3 M-Lok slots on bottom of hand guard
1913 gas tube extends over gas block
Free Float design, clamps on barrel, doesn't interface with receiver
Lower and upper mount remain installed and gas tube can be removed/cleaned and replaced without losing zero
1.3 Inch Inside Diameter
Cut out for hand guard retainer sling loop
Extends 10.64 Inch from receiver
Compatible with stamped and milled receivers

Materials and Finishes

Lower Mount - 7075 Black Hard Coat Anodized
Upper Mount - 4041 QPQ Black Nitride
Hand guard Extrusion - 6061 Black Hard Coat Anodized
Gas Tube - 7075 Black Hard Coat Anodized
JMAC CUSTOMS MMS HANDGUARDS AND GAS TUBES
https://www.robertrtg.com/store/pc/s...yword=JMAC-mms


Thanks for looking and happy shooting!

[RTGparts]

Smith & Wesson Magazine, .22LR, 10 Rounds, Fits Victory Pistol

Steel Construction
Polymer Base Plate
Polymer Follower

Smith & Wesson delivers unmatched superiority through innovative pistols, revolvers, rifles and accessories. Adding confidence to every shooting experience, Smith & Wesson magazines are built with precision and unrivaled craftsmanship. Built to last, you can trust Smith & Wesson factory magazines in your firearm.

SMITH & WESSON VICTORY 22LR 10RD MAGAZINE $32.95
https://www.robertrtg.com/store/pc/S...E-14p10981.htm


Thanks for looking and happy shooting!

[RTGparts]

POF, MP5, A2, Fixed Buttstock, Black, Surplus Condition

MP5 fixed black buttstock. Made by POF on HK tooling in an HK licensed factory.

These are military surplus, USED in good condition. They are in great working order, have been in military stock for some time. Expect the usual scratches, dings, chips, markings and wear from military use.

Will fit: HK MP5, HK SP5, HK94, Century AP5, PTR 9C and similar clones that accept MP5 Stocks.

Will not fit: MP5K 2-Pin Receiver, .22lr clones or G3 receivers.

POF MP5 BLACK A2 BUTTSTOCK USED $69.00
https://www.robertrtg.com/store/pc/P...-107p11174.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: brayton@rtgparts.com

[RTGparts]

MANTICORE ARMS TAVOR X95 CANTILEVER FOREND GEN II, AR15 HEIGHT $265.99

The X95 Cantilever Forend offers a wealth of features at an incredible price. To solve some of the inherent issues of how to securely mount a forend to the X95 without contacting the barrel we had to think outside the box, and the solution was a two part system.

Total weight of the system is 1 lb 7.4 ounces compared to the OEM 1 lb 2.5 ounces. Only 3.9 ounces more than the OEM forend at a gain of all aluminum construction, the ability to sleeve a suppressor, a longer and higher and more useful top rail, and almost 2″ of additional forend with a slimmer profile plus M-LOK compatibility and integral QD points.

MANTICORE ARMS TAVOR X95 CANTILEVER FOREND GEN II, AR15 HEIGHT $265.99
https://www.robertrtg.com/store/pc/M...-477p11184.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: brayton@rtgparts.com

[RTGparts]

TIMNEY RUGER PRECISION RIMFIRE TWO-STAGE DROP IN TRIGGER


A true drop in that fits the RPR Rimfire.

The trigger is factory tuned for pull weight, with no creep

2-stage trigger is factory set to .5 pounds (1st stage) and .5 to 2 pounds (2nd stage)

Trigger allows you to become more accurate with your rifle
No gunsmith needed, easy to install
Provides a custom feel for every shooter

The Timney RPR Rimfire is offered in two models - #649 curved shoe and #649ST straight shoe.

TIMNEY RUGER PRECISION RIMFIRE TWO-STAGE DROP IN TRIGGER $253.99
https://www.robertrtg.com/store/pc/T...R-15p11258.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: brayton@rtgparts.com

[RTGparts]

JMAC CUSTOMS 10.1 INCH M-LOK HANDGUARD WITH SLING LOOP CUT AND RAILED GAS TUBE

Introducing the NEW M-Lok Handguard from JMAC Customs. This handguard is part of a modular system that will allow you to personalize your firearm to fit your needs, whether that be professional, competitive, or recreational. Choose between several lower handguard lengths, as well as upper options to include optic mounts, railed dust covers and monolithic railed dust covers (coming soon). From the range to the field the M-Lok Handguard from JMAC Customs has you covered.

The M-Lok Handguard from JMAC Customs was painstakingly designed to retain the highest level of accuracy by creating a mounting block that clamps to your barrel near the receiver. There are no additional points of contact from the mounting block to the end of your muzzle. This allows your barrel to move freely causing no negative effects to your barrel harmonics. The lower half of the mounting block is machined from 7075-T6 aluminum alloy, the upper half is machined from a 4041 QPQ steel alloy. The use of a steel alloy in the upper half of the mounting block allows for a rock solid foundation for the system which will maintain your zero and stand up to abuse for thousands upon thousands of rounds.

The unique design of the mounting block allows the M-Lok Handguard to be installed on most kalashnikov pattern firearms, regardless of the receiver type. Available in several lengths, with and without the lower handguard retainer cutout. The M-Lok Handguard does not require the JMAC Customs railed gas tube for installation. Can be installed in conjunction with a standard AKM upper handguard.

Product Highlight

Easy to measure length! Simply measure from the receiver towards the muzzle to know how the lower hand guard fits
4 Piece Design with 4140 steel threaded upper clamp
5 2/3 M-Lok slots on bottom of hand guard
1913 gas tube extends over gas block
Free Float design, clamps on barrel, doesn't interface with receiver
Lower and upper mount remain installed and gas tube can be removed/cleaned and replaced without losing zero
1.3 Inch Inside Diameter
Cut out for hand guard retainer sling loop
Extends 10.1 Inch from receiver
Compatible with stamped and milled receivers

Materials and Finishes

Lower Mount - 7075 Black Hard Coat Anodized
Upper Mount - 4041 QPQ Black Nitride
Hand guard Extrusion - 6061 Black Hard Coat Anodized
Gas Tube - 7075 Black Hard Coat Anodized

JMAC CUSTOM AK RAILED GAS TUBE FOR AK47, AKM, AK74
https://www.robertrtg.com/store/pc/J...74-5p11235.htm


JMAC CUSTOMS 10.1 INCH M-LOK HANDGUARD WITH SLING LOOP CUT 214.95
https://www.robertrtg.com/store/pc/J...UT-4p11233.htm


JMAC CUSTOMS 10.1 INCH M-LOK HANDGUARD WITH SLING LOOP CUT AND RAILED GAS TUBE $314.10
https://www.robertrtg.com/store/pc/J...BE-4p11232.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: brayton@rtgparts.com

[RTGparts]

FN America, SSR Rear Stock, Adjustable Length of Pull and Cheek Height, Fits FN SCAR 16S/17S

Fits FN SCAR 16S/17S
Toolless Adjustable Length of Pull and Cheek Height
Features MIL-STD M1913 Rail on Bottom of Stock

The FN SCAR SSR Rear Stock is the ultimate precision upgrade to your SCAR 16S and 17S, allowing you to quickly convert your carbine into a DMR-style rifle that is fully adjustable for length of pull (LOP) and cheek height. No tools required! Designed to improve user ergonomics while shooting from the supported prone position, the SSR Rear Stock can be adjusted for length of pull by pushing in on the adjustment lock, extending or collapsing the buttpad to the desired position. The cheek height can be adjusted by pressing in on the cheek rest riser and pulling upward until you reach the correct height. It also features a MIL-STD M1913 rail for attachment of monopods or other accessories that aid supported shooting positions.

FN SSR STOCK FOR SCAR 16S 17S, BLACK
https://www.robertrtg.com/store/pc/F...K-15p11392.htm


FN SSR STOCK FOR SCAR 16S 17S, FDE
https://www.robertrtg.com/store/pc/F...E-15p11391.htm


Thanks for looking and happy shooting!

[RTGparts]

Sig Sauer, Magazine, 9MM, 17 Rounds, Fits P365 X-Macro, Black, New in Box

I have no idea what type of mad science went into squeezing 17rds of 9mm into such a small magazine, but Sig did it, and they work! This is not a magazine I would trust to the aftermarket (though none currently exist anyway). Stock up on OEM while you can.

SIG part number: 8900804
Condition: New in box

SIG P365 X-MACRO 17RD 9MM MAGAZINE NEW, BLACK $49.95
https://www.robertrtg.com/store/pc/S...K-14p10716.htm


Thanks for looking and happy shooting!

[RTGparts]

WTS: GG&G LIGHT/LASER MOUNT ADAPTOR FOR MK23, USP FULL SIZE & USP COMPACT...

GG&G HK MK 23 FLASHLIGHT AND LASER MOUNT, $94.99
https://www.robertrtg.com/store/pc/G...T-234p9083.htm


GG&G HK USP FULL SIZE PICATINNY RAIL FLASHLIGHT AND LASER MOUNT, $44.95
https://www.robertrtg.com/store/pc/G...UNT-8p9008.htm


GG&G HK USP COMPACT PICATINNY RAIL FLASHLIGHT AND LASER MOUNT, $44.95
https://www.robertrtg.com/store/pc/G...UNT-8p8991.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: brayton@rtgparts.com

[RTGparts]

AC-Unity, Double Magazine Coupler for AK103 Mags, Black

Great new double magazine coupler for AK103 mags from AC-Unity. Made of the same durable, lightweight polymer that goes into all AC magazines. Allows you to securely couple two 30rd magazines together.

These were developed for an African MOD and are rugged, durable and shock resistant. Designed specifically for the AK103 mag, the coupler secures to the AK103 mag body contours and will not slip, or slide loose from impacts or repeated firings. The two mags are secured with two bolts that thread into metal threaded inserts that are molded into the coupler. This is a high quality, light weight and nearly indestructible coupler.

This coupler also works with Russian bakelite AK47 30rd magazines.

DOUBLE MAG COUPLER FOR AK103 MAGAZINES, AC-UNITY $12.95
https://www.robertrtg.com/store/pc/s...PLER+FOR+AK103


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: brayton@rtgparts.com

[RTGparts]

These German army surplus bolt carriers were converted to semi-auto by Century Arms for use in their early C91 builds. The conversion simple removes the full auto trip lever engagement at the bottom of the carrier.

We list these in poor condition as Century also modified them to work with their out of spec receivers. Many century receivers have the cocking tube welded to far into the receiver, meaning a correct length carrier would hit the cocking tube abutment to early, preventing the bolt to lock into the trunion. To fix this, Century trimmed the front extension of most carriers, so they would fit correctly into their cocking tubes. These modifications are not uniform or consistent.

Since these are modified, these carriers are great for anyone who needs a project carrier, HK51 carrier or other type of conversion. For a welder, their isn't to much work required to length the front extension for use on an in-spec receiver.

HKG3/91 SEMI-AUTO BOLT CARRIER, P-F CONDITION $59.95
https://www.robertrtg.com/store/pc/H...ON-2p11587.htm


HKG3/91 SEMI-AUTO BOLT CARRIER W/ LOCKING LEVER, P-F CONDITION $69.95
https://www.robertrtg.com/store/pc/H...ON-2p11586.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: brayton@rtgparts.com

[RTGparts]

Geissele Automatics, MK4 Federal, Super Modular Rail, 10", M-LOK, Desert Tan, Black, Barrel Nut Wrench Sold Separately (GEI-02-243), Gas Block Not Included

Height: 2.3"
Inner Diameter: 1.35"
Outer Diameter: 2.11"
Weight w/ Hardware: 10.2oz.
Length 10"
Includes Barrel Nut (Barrel Nut Wrench Sold Separately)

10" Super Modular Rail MK4 Federal M-LOK, Desert Tan

This is the same rail used to fullfill contracts for the Federal Bureau of Investigation (FBI). It's strength, modularity and M-Lok compatibility gives users the capabilities needed to successfully complete the mission at hand.

These rails are purpose-built and feature integrated M1913 picatinny rail sections at the fore of the rail in the 3, 6 and 9 o'clock positions. The Picatinny rail on the bottom of the rail, or the 6 o'clock position, is elongated in this version to more comfortably accommodate accessories. Maximum venting for heat dissipation also dramatically reduces the rails overall weight, while maintaining its same strong and rigid platform. The MK4 M-LOK rail features M-LOK slots at the 3, 6 and 9 o'clock positions as well as the upper 45 Degree quadrants. This allows the user to keep the weight on the rail system down, while keeping the modularity and versatility to attach accessories as necessary.

GEISSELE MK4 FEDERAL SUPER MODULAR RAIL HANDGUARD 10" M-LOK, BLACK $374.99
https://www.robertrtg.com/store/pc/G...CK-6p11565.htm


GEISSELE MK4 FEDERAL SUPER MODULAR RAIL HANDGUARD 10" M-LOK, DESERT TAN $399.99
https://www.robertrtg.com/store/pc/G...AN-6p11623.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: brayton@rtgparts.com

[RTGparts]

WTS: CMC 2.0, FIXED WEIGHT DROP IN TRIGGER FOR AK (2#, 3#, and 4#), $169.99

4 Different Trigger Styles Available!

CMC's AK drop-in trigger group is the ultimate upgrade for your AK47 variant. With its 100% modular, CNC-machined, and easy to install design, this trigger group will give your AK the cleanest, most reliable trigger pull it's ever had. Preset with your choice of factory pull of 2.5lbs, 3.5lb, or 4.5lbs. The CMC AK2.0 Elite Trigger utilizes the most advanced manufacturing and quality control techniques. CMC's critical sear engagement surfaces have a proprietary machining process that renders superior surface finish and dimensional control. As compared to their competition, the techniques used to establish a 1-2 RMS surface finish as opposed to EDMing which leaves a pitty 32 RMS, compared to a mirror which is 0 RMS. Best of all, the CMC AK 2.0 Elite Trigger is proudly 100% Made in the Great State of Texas, and comes with CMC's Satisfaction Guarantee and Lifetime Warranty.

CMC TRIGGERS AK2.0 DROP-IN TRIGGER
https://www.robertrtg.com/store/pc/s...&keyword=cmcak


Thanks for looking and happy shooting!