Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > INTERESTS AND ACTIVITIES > Ammo and Reloading
Register FAQ Members List Calendar Mark Forums Read

Ammo and Reloading Factory Ammunition, Reloading, Components, Load Data and more.

Reply
 
Thread Tools Display Modes
  #1  
Old 08-12-2018, 3:39 PM
TempleKnight's Avatar
TempleKnight TempleKnight is offline
Senior Member
 
Join Date: Aug 2009
Location: Lincoln, CA
Posts: 824
iTrader: 1 / 100%
Default Safety Glass PSA

I had stack of primers blow up today. Fortunately, the design of the Dillon 650 mitigated injury. It sounded like a pistol shot with no hearing protection right next to me. The force went straight up through the primer tube but I could feel the air pressure. I was sure that I was leaking from somewhere but it was just air. Im glad I always wear safety glasses at the bench.

Hereís a pic of the aluminum inner tube.
Attached Images
File Type: jpg E3868995-5084-44F8-BDB6-2F0D99A47A3D.jpg (17.3 KB, 134 views)
__________________
Reply With Quote
  #2  
Old 08-12-2018, 3:52 PM
Trriemferent's Avatar
Trriemferent Trriemferent is offline
Senior Member
 
Join Date: Sep 2012
Posts: 1,209
iTrader: 4 / 100%
Default

Glad youre OK. That one of my biggest fears when reloading? Besides hurting myself, I also worry if my neighbors would call LEO when they hear the load bang. That would be another headache by its self. As Im sure you already know, Dillon will take care of you but do you know what would have caused the failure?
Reply With Quote
  #3  
Old 08-12-2018, 4:58 PM
TempleKnight's Avatar
TempleKnight TempleKnight is offline
Senior Member
 
Join Date: Aug 2009
Location: Lincoln, CA
Posts: 824
iTrader: 1 / 100%
Default

Quote:
Originally Posted by Trriemferent View Post
Glad youre OK. That one of my biggest fears when reloading? Besides hurting myself, I also worry if my neighbors would call LEO when they hear the load bang. That would be another headache by its self. As Im sure you already know, Dillon will take care of you but do you know what would have caused the failure?
I might have been going a little fast. I canít feel the primer seating on my 650 the way I do on the 550. I just got a fresh box of Starline .38 super comp and I was going for a personal best cranking out 2k rounds. Never had a problem before and Iíve been reloading for 50 years.
__________________
Reply With Quote
  #4  
Old 08-13-2018, 10:35 AM
the86d's Avatar
the86d the86d is offline
Calguns Addict
 
Join Date: Jul 2011
Location: Pinko-occupied Commiefornia
Posts: 6,805
iTrader: 3 / 100%
Default

Winchester primers, or S&B?
__________________
"That's what governments are for - get in a man's way." - Captain Malcolm 'Mal' Reynolds
Reply With Quote
  #5  
Old 08-13-2018, 12:35 PM
sghart sghart is offline
Senior Member
 
Join Date: Apr 2012
Location: Sacramento County
Posts: 601
iTrader: 22 / 100%
Default

Damn son, glad you are okay.
Reply With Quote
  #6  
Old 08-13-2018, 12:52 PM
jimmykan's Avatar
jimmykan jimmykan is offline
Senior Member
 
Join Date: Jan 2008
Location: Los Angeles, CA
Posts: 1,926
iTrader: 97 / 100%
Default

Quote:
Originally Posted by the86d View Post
Winchester primers, or S&B?
Why are those the prime suspects?
Reply With Quote
  #7  
Old 08-13-2018, 1:05 PM
Lead Waster's Avatar
Lead Waster Lead Waster is offline
I need a LIFE!!
 
Join Date: Sep 2010
Location: San Mateo, CA
Posts: 15,846
iTrader: 5 / 100%
Default

I had a stack of Federal (small pistol) primers blow up in my 1050. The thick primer tube shield saved me. The follower was Z shaped and across the room, my primer mag looked like the OPs, and it was stuck in the tube. I hosed the tube with WD-40 before trying to extract the primer mag incase there were some live ones still in there. Dillon sent a new assembly, including that shield tube.

Federal uses more sensitive compound (which is why people use it with lightened hammers, etc). The Dillon guy recommended I not use them.

One thing that scared the poo out of me was that when it happened, I had TAKEN OFF MY GLASSES because I have crappy eyesight so I had to get up close to see what was jamming up the press. When the primer stack blew up the primer that was in the primer slide blew apart and the primer anvil hit me square on the nose and I was bleeding from the cut/impact. It was an inch and a half from either eye.

Like OP, I will never reload without glasses or safety glasses (I have prescription safety glasses)

The pop was not as deafening as I thought it might be, I had no ringing in my ears, but have considered wearing some ear pro when loading too, though that is more cumbersome than just glasses. Still it could be really loud.

My workshop has an unfinished ceiling and the insulation has a primer-rod sized hole in it.
__________________
==================




Remember to dial 1 before 911.

Forget about stopping power. If you can't hit it, you can't stop it.

There. Are. Four. Lights!
Reply With Quote
  #8  
Old 08-13-2018, 4:14 PM
SandDiegoDuner SandDiegoDuner is online now
Member
 
Join Date: Apr 2009
Location: Sand Diego
Posts: 401
iTrader: 14 / 100%
Default

Not making this a war of brands... has anyone experienced this issue with any other brand of progressive?

How many primers did you have through the primer tube when she blew?
Reply With Quote
  #9  
Old 08-14-2018, 3:53 AM
the86d's Avatar
the86d the86d is offline
Calguns Addict
 
Join Date: Jul 2011
Location: Pinko-occupied Commiefornia
Posts: 6,805
iTrader: 3 / 100%
Default

I'd like to know the brand of primers.

I popped a Winchester one time, and it was my fault as I forced it into a case that still had the primer crimp, as I didn't stop and check why it was resisting.

I can only imagine the pop of more than one...
__________________
"That's what governments are for - get in a man's way." - Captain Malcolm 'Mal' Reynolds
Reply With Quote
  #10  
Old 08-14-2018, 5:15 PM
TempleKnight's Avatar
TempleKnight TempleKnight is offline
Senior Member
 
Join Date: Aug 2009
Location: Lincoln, CA
Posts: 824
iTrader: 1 / 100%
Default

CCI primers. I believe I was over aggressive. The case feeder is running perfectly and was really sailing.

Dillon is sending me a whole new primer assembly just in case another component is compromised. They said to make sure I tossed the steel tube because itís only rated for one stack detonation.

Iím really impressed with how the primer tube contained the detonation and how Dillon supports their products when something breaks.
__________________
Reply With Quote
  #11  
Old 08-15-2018, 10:07 AM
mikeyr's Avatar
mikeyr mikeyr is offline
Levers, the original AW
CGN Contributor
 
Join Date: Sep 2011
Location: SB
Posts: 845
iTrader: 2 / 100%
Default

think i will wear my safety glasses from now on when reloading

I have been wearing hearing protection but that is because I already have hearing loss and tinnitus and was worried about the noise of primers going off even though it has not happened to me yet.
__________________
As First Lady, Hillary had one job to do, and one job to do only. And she outsourced it to Monica Lewinsky.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 4:25 PM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2018, Calguns.net an Incorporated Company All Rights Reserved.
Calguns.net and The Calguns Foundation have no affiliation and are in no way related to each other.
All opinions, statements and remarks made by Calguns.net on this web site and elsewhere are solely attributable to Calguns.net.