CALGUNNERS SPECIAL PRICING AR MAGLOCK/KINGPIN Gen 4 FINAL MONTH

[protohyp]

Originally Posted by Whiskey_Tango

ETA on this???

finalizing the spring spec on this for optimal performance. Pins are all ready for production but even when they're in production we are trying to provide enough stock so we won't be out of stock.

Please understand we are trying to launch, Freedom Follower, Speedswitch and ?switch all at the same time so the scramble is real but we need to remain focused so that we get everything right.

That being said we won't be hurt if you purchase JT or any other product. I will update next when full blown production happens and give you a more solid ETA at that time.

[rob1516]

that music is **** ing terrible.

[smittty]

Disco Pin?
As in disconnect pin.

[DiRTY DOG]

(Many of these names can be used in conjunction with the interchangable terms: button, pin, switch, activator, or device)

ADA - Action Disassembly Activator
A$S- Action Seperation Switch
BADASS - Button for Action Disassembly And Seperation Switch
CLUB California Lower Upper Button
CRASH - California Receiver Apart SwitcH
CRASH - California Receiver Assembly SwitcH
CRASH - California Receiver Action SwitcH
DAB - Dis Assembly Button
DAB - Disassembled Action Button
DARE - Disassembled Action REloading button
DARE - Disassembled Action Receiver Equipment
DARE - Disassembled Action REceiver button
DARK - Disassembled Action Reciever Knob
DULL - Detatch Upper Lower Lever
FAD - Firearm Action Disassembly
FAB - Freedom Action Button
FADE Firearm Action Disassembly Equipment
FAP - Freedom Assembly Pin
FAP - Freedom Action Pin
FMD - Fixed Magazine Disassembly
Jerry Rigged Button
RAD - Rifle Action Disassembly
SAFER - Seperate Action For Easy Reloading device
SAFR - Seperate Action From Receiver button
Seperation Switch
SLOW - Seperate LOWer button
S-LOWER - Seperate LOWER button
STFU - Seperate The Full Upper
TAB - Take Apart Button

Or a combination of terms, like: Jerry Rigged SAFER device (Seperate Action For Easy Reloading).

All brands and types of compliance devices and workarounds should be referred to as "Jerry Rigged devices" as a big middle finger to Governer Jerry Brown. You read it here first.

[protohyp]

Originally Posted by DiRTY DOG

(Many of these names can be used in conjunction with the interchangable terms: button, pin, switch, activator, or device)



ADA - Action Disassembly Activator

A$S- Action Seperation Switch

BADASS - Button for Action Disassembly And Seperation Switch

CLUB California Lower Upper Button

CRASH - California Receiver Apart SwitcH

CRASH - California Receiver Assembly SwitcH

CRASH - California Receiver Action SwitcH

DAB - Dis Assembly Button

DAB - Disassembled Action Button

DARE - Disassembled Action REloading button

DARE - Disassembled Action Receiver Equipment

DARE - Disassembled Action REceiver button

DARK - Disassembled Action Reciever Knob

DULL - Detatch Upper Lower Lever

FAD - Firearm Action Disassembly

FAB - Freedom Action Button

FADE Firearm Action Disassembly Equipment

FAP - Freedom Assembly Pin

FAP - Freedom Action Pin

FMD - Fixed Magazine Disassembly

Jerry Rigged Button

RAD - Rifle Action Disassembly

SAFER - Seperate Action For Easy Reloading device

SAFR - Seperate Action From Receiver button

Seperation Switch

SLOW - Seperate LOWer button

S-LOWER - Seperate LOWER button

STFU - Seperate The Full Upper

TAB - Take Apart Button



Or a combination of terms, like: Jerry Rigged SAFER device (Seperate Action For Easy Reloading).



All brands and types of compliance devices and workarounds should be referred to as "Jerry Rigged devices" as a big middle finger to Governer Jerry Brown. You read it here first.

Dirty Dog you may just get one because of your effort! Great stuff guys!


Sent from my iPhone using Tapatalk

[Ki6vsm]

Nice work. Some cleaver backronyms in there.

.

[protohyp]

Originally Posted by Ki6vsm

Nice work. Some cleaver backronyms in there.

I see you left out Firearm Action Gadget.

haha

[Ki6vsm]

Originally Posted by protohyp

haha

Not making fun of your product! I want to check one out when they "hit the streets", as the politicians say. Probably buy to try. I'd just had a funny thought. I should probably edit that out at some point.

[dwinters14]

SAFER gets my vote!

[swamp2]

Originally Posted by protohyp

finalizing the spring spec on this for optimal performance. Pins are all ready for production but even when they're in production we are trying to provide enough stock so we won't be out of stock.

Please understand we are trying to launch, Freedom Follower, Speedswitch and ?switch all at the same time so the scramble is real but we need to remain focused so that we get everything right.

That being said we won't be hurt if you purchase JT or any other product. I will update next when full blown production happens and give you a more solid ETA at that time.

Good candid response. It's a great way to piss of some considerable number of folks by providing a rough ETA only to find delays, which seem to almost be the norm. Take your time, do it all right and you'll win the business. That being said, keep your eye on the June 30th deadline!

[swamp2]

Originally Posted by DiRTY DOG

(Many of these names can be used in conjunction with the interchangable terms: button, pin, switch, activator, or device)

ADA - Action Disassembly Activator
...
TAB - Take Apart Button

Or a combination of terms, like: Jerry Rigged SAFER device (Seperate Action For Easy Reloading).

All brands and types of compliance devices and workarounds should be referred to as "Jerry Rigged devices" as a big middle finger to Governer Jerry Brown. You read it here first.

Holy crap how long did that take to put together?

[protohyp]

Originally Posted by swamp2

Good candid response. It's a great way to piss of some considerable number of folks by providing a rough ETA only to find delays, which seem to almost be the norm. Take your time, do it all right and you'll win the business. That being said, keep your eye on the June 30th deadline!

thanks...and yes...we are keeping that deadline in mind.

[comifornia:(]

Cali-pop-pin

[DProm]

subbed

[protohyp]

Here you go guys. Latest update. Please watch this video to find out the latest and greatest.

https://youtu.be/QGLay0egaX8


Sent from my iPhone using Tapatalk

[awakening16]

would this fit on any AR? specifically scar 16

[protohyp]

Originally Posted by awakening16

would this fit on any AR? specifically scar 16

Guess we will just have to find a way


Sent from my iPhone using Tapatalk

[thmpr]

That’s awesome!!!!

[ARDude]

SOON PLEASE!

[nitroxdiver]

Proto, just watched your video. Genius. I hope you sell a million of them. Good luck to you guys.


Sent from my iPad using Tapatalk

[DiRTY DOG]

Minuteman Button
Minuteman Ramrod
I Can't Believe It's Not a Bullet Button
Defiance Button
1776 Button
Red Dawn Button
Wolverine Button
California Can Opener
Greased Lightning Button
Lickety Split Pin
Blitzkrieg Button
Button Thing That Goes Up
Fault Line Button
Seizmic Gap Button
Aftershock Button
Tsunami Switch
Epicenter Button
Double Double Button Style
The Gavinator Button
Liberty Button
Liberty Lever/latch
Lever Action device
Outlaw Button
Scoundrel Switch
Alamo Button
Ace in the Hole
Bamboozle Button
Buzzard Button
Mayhem Button
Scallywag Button
Bonanza Button
Shenanigan Button
Eureka Button
Claim Jumper Button
49er Button
Jingle Bob
Golden Button
Golden Gate Button
Ding Dong Button
Diablo Button
Mushroom Button
Panic Button
Loophole Stud
Loophole Button

[Stevehazard]

Watched your most recent vid. I think this is going to be the go to mag lock system. That being said name it right because it will be reported on at some point.

For the speedswitch I like flipswitch.
And for the ?switch I like SAFERswitch. And with that new designed mag lock that you can drop the mags on a double feed it is also safer too.

[dwinters14]

Yeah, I like this, it may make me want to go maglock!

[bertskiii]

Will be waiting for these. Was looking into JT til I found this thread. Great work.

[General]

I think it's Bullswitch!

[k1dude]

Break Action Assist Device = BAAD

Future Universal Compliance Assist = FUCA

For Unconstitutional Break Action Requirements = FUBAR

Breakopen Switch = BS

[swamp2]

Originally Posted by awakening16

would this fit on any AR? specifically scar 16

A SCAR certainly isn't an AR! The non-pivoting way that SCARs open makes the new law very problematic for the platform (SCAR 16 or 17) for a compliance system anything like this one. My (lame) plan is to go with a fixed magazine until there is another solution.

Protohyp - assuming you've taken a SCAR apart - do you have another genius idea here up your sleeve? The market is small, but as a member, it would be fantastic to not completely neuter this amazing rifle. I think most of the owners would pay a much higher price for a good solution here, justified certainly in part by what would be a low production volume.

[protohyp]

Originally Posted by swamp2

A SCAR certainly isn't an AR! The non-pivoting way that SCARs open makes the new law very problematic for the platform (SCAR 16 or 17) for a compliance system anything like this one. My (lame) plan is to go with a fixed magazine until there is another solution.

Protohyp - assuming you've taken a SCAR apart - do you have another genius idea here up your sleeve? The market is small, but as a member, it would be fantastic to not completely neuter this amazing rifle. I think most of the owners would pay a much higher price for a good solution here, justified certainly in part by what would be a low production volume.

I would love to do a Scar as well as any other non AR Platform but haven't had a chance to look at them yet nor do I have one. My cousin has one and may call him to check it out and see if there is anything I can do. I'll look into it.

[nicky c]

I was just contemplating whether a fixed mag setup like the one protohyp is developing could be successfully and legally added to a BBAW....

Due to the current legal injunction, it’s still legal to possess standard cap mags and even use them in BBAW’s. The mag lock systems in development are clearly faster to operate than BB’s, marrying the two would make for an interesting concept.

[bajadan]

Originally Posted by nicky c

I was just contemplating whether a fixed mag setup like the one protohyp is developing could be successfully and legally added to a BBAW....

Nope, can't remove it. Unless you de=reg.

[protohyp]

Originally Posted by nicky c

I was just contemplating whether a fixed mag setup like the one protohyp is developing could be successfully and legally added to a BBAW....

Due to the current legal injunction, it’s still legal to possess standard cap mags and even use them in BBAW’s. The mag lock systems in development are clearly faster to operate than BB’s, marrying the two would make for an interesting concept.

if you hop over to my New Product Teaser thread and read through a couple of my last posts it may blow up your skirt

[nicky c]

Originally Posted by protohyp

if you hop over to my New Product Teaser thread and read through a couple of my last posts it may blow up your skirt

I’m eagerly awaiting release of the freedom followers...

[S.A.]

OP, do you demonstrate your product at gun shows? Maybe upcoming San Bernardino show?

[protohyp]

Originally Posted by S.A.

OP, do you demonstrate your product at gun shows? Maybe upcoming San Bernardino show?

no not yet since we aren't in production just yet. I know that there is a distributer out there that does go to the gun shows and shows mostly AR Maglock products so he most likely will be there with the pin is my guess

[swamp2]

Originally Posted by protohyp

I would love to do a Scar as well as any other non AR Platform but haven't had a chance to look at them yet nor do I have one. My cousin has one and may call him to check it out and see if there is anything I can do. I'll look into it.

I will loan you my SCAR 17 (7.62/Heavy) for development work! But again, separating upper and lower is nothing like an AR, no pivot; remove single front take-down pin then slide lower forward, sort of an interference fit. I already put some thought into something even remotely similar and just can't see how to make it work.

[protohyp]

Originally Posted by swamp2

I will loan you my SCAR 17 (7.62/Heavy) for development work! But again, separating upper and lower is nothing like an AR, no pivot; remove single front take-down pin then slide lower forward, sort of an interference fit. I already put some thought into something even remotely similar and just can't see how to make it work.

It can work...i have it already in my head...just looked it up on youtube.

it would take a lot of engineering and parts to accomplish it though. but it can be done.

I would probably only do it as a one off or per order. its not worth it to spend a bunch in production if only a handful went with maglock and the rest would go featureless. If distributors wanted the scars back on the shelves in something other than featureless it would start to make sense but again you have to be able to produce 5000+ for it to even make sense and they'd have to be sold already.

[nitroxdiver]

Originally Posted by k1dude

For Unconstitutional Break Action Requirements = FUBAR

WINNER!!!!


Sent from my iPhone using Tapatalk

[protohyp]

Man there are some good ones out there.

Will probably be wrapping up the contest in a week or two so keep them coming. Theres some creative ones we have to sift through

[Sigbird]

To confirm. You will only be selling the rear take down pin and the Maglock device needs to be purchased separately?

EBS= Eazy Breakdown Switch or System

[protohyp]

Originally Posted by Sigbird

To confirm. You will only be selling the rear take down pin and the Maglock device needs to be purchased separately?

EBS= Eazy Breakdown Switch or System

On the AR Maglock site they will be selling it as a set. On my site it’ll be both as a set and as just the rear pin alone


Sent from my iPhone using Tapatalk