Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back > MARKETPLACE > Commercial Sales > New Product Announcements
Register FAQ Members List Calendar Mark Forums Read

New Product Announcements Vendors, share information about your newest products. Only CGN Vendors can start threads in this forum.

Thread Tools Display Modes
Old 10-28-2021, 6:45 PM
Midwest Armor Midwest Armor is offline
Junior Member
Join Date: Jun 2019
Location: Knoxville, TN
Posts: 6
iTrader: 0 / 0%
Lightbulb Introducing the Leap MOLLE Carrier

Hello Calguns!

We launched a new carrier that we created in collaboration with a lot of feedback from users. It is an entire carrier system that is made with durable materials, expandable and all American made right here in Knoxville, TN.

Our goal with this carrier was to create an accessible carrier to fit a wide range of use cases and to make it compatible not just with our products but industry products so you are not tied down to one manufacturer products. This allows you to mix and match the best of breed that fits your needs.

Check out our setup video

Below is our full description of the Leap MOLLE Carrier and you can check out the kit and base setup plus the accessories here:

This is the Leap MOLLE Carrier Kit

Carrier Overview

The Leap MOLLE Carrier is a blend of an interchangeable set of products that work as part of a system while also being made with tougher materials which enable a longer lasting wear. Our goal with this carrier was to create an accessible carrier to fit a wide range of use cases while being 100% American Made, staying true to our mission. This is the kit setup of this system which comes together with the Leap Front Plate Bag, Leap Back Plate Bag, MOLLE FRONT FLAP as well as our ELASTIC VELCRO CUMMERBUND. If you would like to mix and match different system parts be sure to check out our LEAP MOLLE CARRIER BASE.

The Leap MOLLE Carrier Front Plate Bag features three rows of four column MOLLE Velcro which allow you to easily attach MOLLE pouches, placards, identifiers or your favorite patch. The built in cable routing allows you to route cables for your communication needs while keeping everything nice and out of the way for easy access.

The Leap MOLLE Carrier Back Plate Bag features 6 rows of MOLLE, 1 row with 4 columns and remaining 5 rows with 6 columns. A flap covers the Velcro on the bag to avoid snagging while also allowing you to secure items in their place. Additionally the bottom flop features a hidden map pocket with an easy to use pull tab.

Each Plate Bag features a 3D Sculpted back which adds comfort for your body-side while also allowing for airflow with the 3D Mesh backing for allowing cooling and release of heat during longer wears.

Cummerbund Support
The included cummerbund is our Elastic Velcro Cummerbund which allows for easy adjustability with two velcro attachments at each end as well as built in cell pockets. The built in cells come in a 3 cell configuration. Two of the cell pockets can fit your standard 5.56 Mags while the smaller cell can hold your IFAK or any other item you may need to carry for easy access from either side. All the cells feature a pull tab that can be used to secure items or used to loop bungee for compatible accessories.

While this kit comes with the standard Elastic Velcro Cummerbund it will take any of the available Cummerbunds including those with FIRST SPEAR TUBES™.

Plate Sizing
You can easily fit Shooters Cut, Simmer Cut or SAPI cut plates into the Leap Carrier. Our plate bags were built to support a wide variety of plate thicknesses, sizes and weights.

Medium – up to 10” x 12.5”

Large – 10.25” x 13.25”

Extra Large – 11” x 14”

Maximum thickness 1.2”

Our carriers are made with higher grade materials for the purpose of ensuring a longer durability period. Rather than focusing on just reducing weight or cost we focused on finding a balance that allows you to feel confident your gear will not fail while also giving you the flexibility of reducing wait all while being US Made.

Each plate bag body is made from 500D Cordura which provides ideal durability for long term use, wear and tear and will take the abuse of the harsh environments including water, dust and more abrasion resistant.

The back of the plate bags feature a 3D Sculpted foam that keeps your gear and plates off your body which allows for airflow and comfort for long term wear without feeling everything against your body.

In addition to the 3D Sculpted foam the back features a 3D Mesh that not only helps keep your body cool with its natural ability to allow for airflow but it also reduces weight compared to 2D fabrics.

Features Overview
100% US Made
Jumpable style platform
MOLLE grid on front and back as well as shoulders (Laser MOLLE)
Accepts rectangle, Shooters Cut, Swimmers Cut and SAPI plates
Works with any SwiftClip attachment
Hidden map pocket in rear plate pocket (accessible from bottom with pull tab)
Back flap configuration full field of loop in addition to bungee
Front flap full velcro support for placards
Compatible with all our Leap products as well as universal Cummerbunds and Pouches
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -8. The time now is 10:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Proudly hosted by GeoVario the Premier 2A host., the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2021, an Incorporated Company All Rights Reserved.
All opinions, statements and remarks made by on this web site and elsewhere are solely attributable to