Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > MARKETPLACE > Commercial Sales
Register FAQ Members List Calendar Mark Forums Read

Commercial Sales For the Commercial sales of Firearms and Accessories. Read the rules before posting.

Reply
 
Thread Tools Display Modes
  #41  
Old 06-17-2021, 7:06 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: BCM GUNFIGHTER CHARGING HANDLE MOD 3B, $39.95

The BCMGUNFIGHTER Charging Handle features internal redesigns to direct force off of the weakest part of the system, the roll pin, and into the body of the charging handle during support hand only manipulations. This new design has a built in backstop engineered into the charging handle. As the latch is opened up, its travel is limited by these flat surface backstops, resulting in a stronger system and smoother operation.

BCM GUNFIGHTER CHARGING HANDLE MOD 3B, $39.95
https://www.robertrtg.com/store/pc/B...-3B-6p8612.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #42  
Old 06-18-2021, 6:46 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: MP5 PICATINNY BACK PLATE & SB TACTICAL FOLDING PICATINNY BRACE

I tried this out in the shop the other day and really liked the setup on one of our MP5s. For such a lightweight and minimalist setup, the brace was actually quite comfortable. The Knights Armament rail is functional, comfortable, and solid, as you would expect from KAC. Didn't hurt that it looked great too.

JMAC CUSTOMS RSA-MP5 M1913 PICATINNY BACK PLATE, $89.95
https://www.robertrtg.com/store/pc/R...S-134p7313.htm

SB TACTICAL FS1913 FOLDING PICATINNY BRACE, $199.99
https://www.robertrtg.com/store/pc/F...L-134p6925.htm

KAC HK MP5 SP5 RAS HANDGUARD, $344.47
https://www.robertrtg.com/store/pc/K...D-107p7688.htm



Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: info@rtgparts.com



__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #43  
Old 06-21-2021, 7:15 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: MILITARY OVERRUN B5 SYSTEMS SOPMOD MIL-SPEC STOCK, BLACK & FDE, $94.95

This is the military issue version of the B5 SOPMOD stock. Military style sling attachment points and Government contract markings. For those making Afghanistan or Iraq war era M4's, these are the perfect choice. Comes in original military packaging with military label and cage number. Condition is brand new in original wrapper.

MILITARY OVERRUN B5 SYSTEMS SOPMOD MIL-SPEC STOCK, BLACK, $94.95
https://www.robertrtg.com/store/pc/M...ACK-6p8637.htm


MILITARY OVERRUN B5 SYSTEMS SOPMOD MIL-SPEC STOCK, FDE, $94.95
https://www.robertrtg.com/store/pc/M...FDE-6p8638.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #44  
Old 06-22-2021, 7:24 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: ROMANIAN AK47 75RD 7.62x39 DRUM MAG NEW, $129.87

Romanian made AK47-AKM 75rd drum new. Will work for all 7.62x39mm AK style weapons that take standard magazines.

ROMANIAN AK47 75RD 7.62x39 DRUM MAG NEW, $129.87
https://www.robertrtg.com/store/pc/A...N-164p6349.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #45  
Old 06-23-2021, 6:59 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: POLYMER AR HANDGUARDS, B5 SYSTEMS & BCM...

Have you ever considered putting together an inexpensive, lightweight, high quality AR? Some might say combining those 3 characteristics is a bit of a stretch. We disagree. Check out our polymer handguards from 2 names you know you can trust for top quality, BCM & B5 Systems.

BCM GUNFIGHTER POLYMER PKMR, MID LENGTH, BLK, $26.95
https://www.robertrtg.com/store/pc/B...ACK-6p8613.htm


BCM GUNFIGHTER POLYMER PKMR, CARBINE LENGTH, FDE, $24.95
https://www.robertrtg.com/store/pc/B...FDE-6p8614.htm


B5 SYSTEMS CARBINE LENGTH M-LOK HANDGUARD, FDE, $28.00
https://www.robertrtg.com/store/pc/B...FDE-8p8625.htm


B5 SYSTEMS CARBINE LENGTH M-LOK HANDGUARD, COY, $28.00
https://www.robertrtg.com/store/pc/B...COY-8p8628.htm


B5 SYSTEMS CARBINE LENGTH M-LOK HANDGUARD, ODG, $28.00
https://www.robertrtg.com/store/pc/B...ODG-8p8629.htm


B5 SYSTEMS CARBINE LENGTH M-LOK HANDGUARD, GRY, $28.00
https://www.robertrtg.com/store/pc/B...RAY-8p8630.htm


B5 SYSTEMS MID LENGTH M-LOK HANDGUARD, BLK, $30.95
https://www.robertrtg.com/store/pc/B...ACK-6p8566.htm


B5 SYSTEMS MID LENGTH M-LOK HANDGUARD, FDE, $30.95
https://www.robertrtg.com/store/pc/B...FDE-6p8567.htm


B5 SYSTEMS MID LENGTH M-LOK HANDGUARD, COY, $30.95
https://www.robertrtg.com/store/pc/B...COY-6p8568.htm


B5 SYSTEMS MID LENGTH M-LOK HANDGUARD, ODG, $30.95
https://www.robertrtg.com/store/pc/B...ODG-6p8569.htm


B5 SYSTEMS MID LENGTH M-LOK HANDGUARD, GRY, $30.95
https://www.robertrtg.com/store/pc/B...RAY-8p8631.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #46  
Old 06-24-2021, 7:12 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: SOVIET SURPLUS AKM/AK47/AK74 LAMINATED STOCKS, NEW OLD STOCK

New old stock, Soviet Surplus, AKM AK47 AK74 laminated wood buttstock. This is the correct stock for a stamped receiver AK which has one tang. Nice lacquer finish. Unissued old stock, cold war era production. Still brand new but expect storage and transit marks from decades of storage. Each stock has ONE tang cut for the upper tang of a stamped receiver's rear stock trunnion. Only a few in stock.

SOVIET SURPLUS AKM/AK47/AK74 LAMINATED BUTTSTOCK, $89.95
https://www.robertrtg.com/store/pc/A...LUS-4p8643.htm


New old stock, Soviet Surplus, AKM AK47 AK74 laminated wood buttstock without hardware. This is the correct stock for a stamped receiver AK which has one tang. Wood is brand new and unissued, no hardware included. Unissued old stock, cold war era production. Still brand new but expect storage and transit marks from decades of storage. Each stock has ONE tang cut for the upper tang of a stamped receiver's rear stock trunnion. Only a few in stock.

SOVIET SURPLUS AKM/AK47/AK74 LAMINATED BUTTSTOCK WITHOUT HARDWARE, $39.95
https://www.robertrtg.com/store/pc/A...NOS-4p8644.htm


New old stock, Soviet Surplus, AKM AK47 AK74 laminated wood buttstock without hardware. This is the correct stock for a stamped receiver AK which has one tang. Wood is brand new and unissued, no hardware included. These are not as nice as our other new old stock offering. Wood got damp or otherwise dirty, which has discolored the wood (as pictured). Unissued old stock, cold war era production. Still brand new but expect storage and transit marks from decades of storage. Each stock has ONE tang cut for the upper tang of a stamped receiver's rear stock trunnion. Only a few in stock.

SOVIET SURPLUS AKM/AK47/AK74 LAMINATED BUTTSTOCK WITHOUT HARDWARE, DIRTY, $29.95
https://www.robertrtg.com/store/pc/A...NOS-4p8646.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: info@rtgparts.com






__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #47  
Old 06-25-2021, 7:21 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: LANCER 30RD MAGS BLK & FDE, CLEAR SMOKE, FDE & PURPLE...

Lancer set out to engineer a better magazine; one with the reliability of steel" durability of polymer and weight of aluminum - the L5AWM. The magazine design includes a one-piece" wrap-around steel feed lip assembly and an aggressive surface texture to create the ultimate hybrid magazine tough enough for military" LE and commercial use. The internal geometry of the Advanced Warfighter Magazine is a constant curvature utilizing a non-tilting follower for reliable feeding. The body and component materials are corrosion and chemical resistant" passing military chemical testing.

LANCER L5AWM 30RD BLK MAG, 5.56MM/.223, $15.99
https://www.robertrtg.com/store/pc/L...M-396p7698.htm


LANCER L5AWM 30RD FDE MAG, 5.56MM/.223, $15.99
https://www.robertrtg.com/store/pc/L...M-396p7699.htm


LANCER L5AWM 30RD SMOKE TRANSLUCENT MAG, 5.56MM/.223, $18.99
https://www.robertrtg.com/store/pc/L...M-396p7696.htm


LANCER L5AWM 30RD FDE TRANSLUCENT MAG, 5.56MM/.223, $18.99
https://www.robertrtg.com/store/pc/L...M-396p7771.htm


LANCER L5AWM 30RD PURPLE TRANSLUCENT MAG, 5.56MM/.223, $18.99
https://www.robertrtg.com/store/pc/L...M-396p8453.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #48  
Old 06-28-2021, 7:55 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: HENSOLDT Z-24 OPTIC KIT, EXCELLENT, $799.99

German Hensoldt Z-24 4x28 optics kit. This was the last and most advanced scope issued for the HK G3. 4 power crystal clear optics with bullet drop compensator to 600 meters and the option of reticle illumination (when used with a crosshair illuminator). This kit includes Hensoldt Z-24 scope, HK claw mount, lens covers and case. Each include a small tool kit or cleaning kit, exact accessories vary from kit to kit. As shown in the last image; the hardshell cases have cracks but are in working condition. The scopes are in excellent condition. This scope will not work on a gun that has a welded top rail. These are the nicest Z24 optics we have seen for many years. Surplus excellent condition and in perfect working order. These kits were obviously taken from unissued guns. The white powder in the images is long-term protective 'stuff' that the Germans put on anything rubbery. If you want a new scope case we have the later style German camo cases in stock. This was an improved version that won't crack like the earlier hardshells, SKU: HKK-1015.

HENSOLDT Z-24 OPTIC KIT, EXCELLENT, $799.99
https://www.robertrtg.com/store/pc/H...ENT-2p2356.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com







__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #49  
Old 06-29-2021, 7:19 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: FRANKLIN ARMORY BFSIII CZ-C1 BINARY TRIGGER KIT FOR CZ SCORPION, $449.00

The Binary Firing System GEN 3 (BFSIII) is a 3-position trigger. In position 3 it fires one round on pull and one round on release, making it the fastest semi-automatic trigger on the market. This trigger is ideal for both tactical and competition use. The BFSIII provides greatly reduced split times between rounds, allowing for tighter groups.

FRANKLIN ARMORY BFSIII CZ-C1 BINARY TRIGGER KIT FOR CZ SCORPION, $449.00
https://www.robertrtg.com/store/pc/F...N-216p7045.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #50  
Old 06-30-2021, 6:39 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: UZI 80% RECEIVERS, FOLDING & WOOD STOCKS, TOP COVERS, GRIP STICKS, K GRIPS...

UZI 80% RECEIVERS, FOLDING & WOOD STOCKS, TOP COVERS, GRIP STICKS, K GRIPS...

UZI REPAIR SECTION, 80% RECEIVER, $76.95
https://www.robertrtg.com/store/pc/U...ER-22p4277.htm


UZI FOLDING STOCK, $28.95
https://www.robertrtg.com/store/pc/U...CK-22p2827.htm


UZI WOOD STOCK ASSEMBLY COMPLETE, USED, $39.00
https://www.robertrtg.com/store/pc/U...ED-22p2832.htm


UZI TOP COVER COMPLETE, LIKE NEW, $28.95
https://www.robertrtg.com/store/pc/U...EW-22p2828.htm


UZI TOP COVER COMPLETE, USED, $13.95
https://www.robertrtg.com/store/pc/U...ED-22p2829.htm


UZI GRIP STICK STRIPPED, HEBREW MARKED, $29.95
https://www.robertrtg.com/store/pc/U...ED-22p3703.htm


IMI UZI GRIP STICK COMPLETE, $64.95
https://www.robertrtg.com/store/pc/I...NT-22p2809.htm


UZI K-GRIP HANDGUARD, $34.95
https://www.robertrtg.com/store/pc/U...RD-22p2795.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: info@rtgparts.com













__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #51  
Old 07-01-2021, 6:55 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: PPS-43 3-MAGAZINES AND POUCH COMBO, $44.99

Three PPS-43 Magazines with Pouch. Great value on original Soviet surplus. All the mags are new old stock condition. Pouches are mostly also new old stock. A few of them might show a small amount of wear or storage marks.

PPS-43 3-MAGAZINES AND POUCH COMBO, $44.99
https://www.robertrtg.com/store/pc/P...BO-14p3362.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com



__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #52  
Old 07-02-2021, 7:22 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: CMMG AR CONVERSION KIT 22LR, STAINLESS BOLT, THREE 25RD MAGAZINES, $189.99

CMMG, AR Conversion Kit, 22LR, Stainless Steel Bolt Group, 3 Magazines, 25Rd

CMMG AR CONVERSION KIT 22LR, STAINLESS BOLT, THREE 25RD MAGAZINES, $189.99
https://www.robertrtg.com/store/pc/C...NES-6p8661.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #53  
Old 07-06-2021, 7:01 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: SIG P320 FULL SIZE MATCH THREADED BRL, GREY GHOST, $187.19

Beautiful threaded barrel for your SIG P320 or M17 9mm. Grey Ghost Precision, GGP320 Full Size, Match Grade Barrel, Fits Sig Sauer P320 Full Size, 9MM, Threaded, 1/2 x 28 RH, 416R Stainless Steel, TiN Coated.

SIG P320 FULL SIZE MATCH GRADE THREADED BARREL 1/2x28, TIN, GREY GHOST PRECISION, $187.19
https://www.robertrtg.com/store/pc/S...N-216p8660.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #54  
Old 07-07-2021, 6:37 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: FN MAGAZINES, P90, FIVE-SEVEN, 509, 509C, FNX, FNS, LS EDGE...

FN P90 5.7X28MM 50RD MAGAZINE, $38.95
https://www.robertrtg.com/store/pc/F...NE-14p4638.htm


FN 509 LS EDGE 9MM 17RD MAGAZINE, $68.95
https://www.robertrtg.com/store/pc/F...EW-14p8665.htm


FN FIVE-SEVEN MAGAZINE 5.7 X 28MM, 20RD, $34.95
https://www.robertrtg.com/store/pc/F...RD-14p4687.htm


FN 509 9MM 17RD MAGAZINE, $41.95
https://www.robertrtg.com/store/pc/F...EW-14p8159.htm


FN 509 9MM 24RD MAGAZINE, $54.95
https://www.robertrtg.com/store/pc/F...EW-14p7943.htm


FN 509C 9MM 12RD MAGAZINE, BLACK, PINKY EXTENSION, $44.00
https://www.robertrtg.com/store/pc/F...ON-14p8295.htm


FN 509C 9MM 15RD MAGAZINE, BLACK, $41.95
https://www.robertrtg.com/store/pc/F...CK-14p8158.htm


FN 509C 9MM 15RD MAGAZINE, FDE, $41.95
https://www.robertrtg.com/store/pc/F...DE-14p8157.htm


FN FNX 9MM 17RD MAGAZINE, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p7821.htm


FN FNX .40SW 14RD MAGAZINE, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p7822.htm


FN FNX .45ACP 15RD MAGAZINE, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p7877.htm


FN FNS 9MM 17RD MAGAZINE, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p8023.htm


FN FNS 9MM 12RD MAGAZINE, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p7851.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #55  
Old 07-08-2021, 7:00 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: CIRCLE 10 AK AKM AK74 V3 ALUMINUM PISTOL GRIP, $59.95

Introducing the Circle 10 AK Aluminum Pistol Grip (APG) Mod 3. Inspired by a popular Russian AK pistol grip, the APG Mod 3 is made from 6061-T6 aluminum that is hardcoat anodized. Sized for medium to large hands, it features finger grooves on the front and a nice arched back for a firm grip. U.S. made, it counts as one 922(r) compliant part. Includes all mounting hardware. The center of this grip is hollow and has no storage capabilities.

CIRCLE 10 AK AKM AK74 V3 ALUMINUM PISTOL GRIP, $59.95
https://www.robertrtg.com/store/pc/A...-AK-4p8659.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #56  
Old 07-09-2021, 7:01 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: B&T AK47 AKM QUAD-RAIL HANDGUARD - SWISS MADE, $399.95

Swiss made, military grade B&T AKM-AK74 quad rail handguard. Fits most AKM style weapons, depending on your particular rifle fitting may be required. B&T Switzerland is a world leader in arms innovation. These same hand-guards are in use by several militaries around the world. Buy with confidence, B&T is the best of the best.

Original MSRP - $499.95 Save $100.00

B&T AK47 AKM QUAD-RAIL HANDGUARD - SWISS MADE, $399.95
https://www.robertrtg.com/store/pc/B...ADE-4p3246.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com




__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #57  
Old 07-12-2021, 7:19 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: HK CHEEK PIECE, $39.95

New production HK cheek piece for your fixed stock G3, HK91, PTR91, HK33, HK94, MP5 or HK94. Will work on all HK style fixed stocks that have push pin retainer bushings in the stock. This will give you the proper cheek weld that every sniper needs and will make shooting your scoped HK style rifle a dream come true. The HK cheek piece is well designed and is easy to install. Once installed it can be removed or re-installed in seconds. Best of all this requires no modifications to your stock or rifle. Once removed you can't tell the cheek piece had ever been there. Works on all HK fixed stocks that have push pin holes as shown in picture 7.

HK CHEEK PIECE, $39.95
https://www.robertrtg.com/store/pc/H...CE-25p1879.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com






__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #58  
Old 07-13-2021, 6:41 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: BRAVO COMPANY BCM MCMR-15 M-LOK HANDGUARD 15", $199.95

Bravo Company's BCM MCMR-15 M-LOK Compatible Modular Rail Handguard features the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard.

The MCMR Series of handguards gives the shooter modularity in the M-LOK platform. This proprietary patented mounting system (US Patent 8904691) includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. It is made from Precision Machined Aerospace 6061-T6 Aluminum Alloy for high strength and is lightweight.

The proprietary engineered profile offers additional cross sectional strength. The actual length when measured to flare is 15 inches and is designed to be used with pistol length, carbine length, or mid length gas systems; all with a low profile gas block.

BRAVO COMPANY BCM MCMR-15 M-LOK HANDGUARD 15", $199.95
https://www.robertrtg.com/store/pc/B...uot-6p8667.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #59  
Old 07-14-2021, 6:40 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: COLT LE6933 EPR M-LOK UPPER 556NATO 11.5 INCH NEW, $999

Colt's Manufacturing Part Number LE6933EPR-CK. Complete Enhanced Patrol Rifle 11.5" upper with M-Lok Handguard, fits AR, 223 Rem/556NATO. Mil-spec quality straight from Colt! Includes: 11.5" lightweight chrome lined barrel w/ 1:7 RH twist, full auto bolt carrier assembly and charging handle, black finish, not pinned and welded.

COLT LE6933 EPR M-LOK UPPER 556NATO 11.5 INCH NEW, $999.00
https://www.robertrtg.com/store/pc/C...NEW-6p8663.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com




__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #60  
Old 07-15-2021, 6:41 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: COLT LE6920 EPR M-LOK UPPER 556NATO 16.1 INCH NEW, $999.00

Colt's Manufacturing Part Number LE6920EPR-CK. Complete Enhanced Patrol Rifle 16.1" upper with M-Lok Handguard, fits AR, 223 Rem/556NATO. Mil-spec quality straight from Colt! Includes: 16.1" chrome lined barrel w/ 1:7 RH twist, full auto bolt carrier assembly and charging handle, black finish.

COLT LE6920 EPR M-LOK UPPER 556NATO 16.1 INCH NEW, $999.00
https://www.robertrtg.com/store/pc/C...NEW-6p8672.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com



__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #61  
Old 07-16-2021, 6:39 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: KAC FREE FLOAT CARBINE RAS FOREND ASSEMBLY, $325.26

The KAC Carbine Free Float RAS (Rail Adapter System) features full length mil-spec M1913 Picatinny rails at the 12-" 3-" 6-" and 9 o'clock positions" making it compatible with any number of rail-mounted tactical accessories. The rail free floats the barrel "allowing for consistent barrel harmonics upon firing" and thus increased accuracy potential. Includes three KAC 11 Rib Rail Panels.

Rifle Requirements: This Free Float RAS requires that the rifle have a carbine length gas system and a low profile gas block. Disassembly of the rifle's gas system and removal of the factory barrel nut will be necessary. This forend uses a proprietary barrel nut that may be installed using a standard AR15 armorer's barrel nut wrench (sold separately). For AR15/SR-15 based platforms only; not compatible with SR-25 variants.

KAC FREE FLOAT CARBINE RAS FOREND ASSEMBLY, $325.26
https://www.robertrtg.com/store/pc/K...W-414p7508.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com



__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #62  
Old 07-19-2021, 7:00 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: HK93 HK33 RECEIVER FLAT, $129.95

NOW AVAILABLE! HK33/93 receiver flats have arrived!

The finest stamping ever available for the HK33/93. Can also be used for HK53 & HK53K builds with a little extra work.

We hired a master tool and die maker to adapt our German HK G3 stamping dies for use on this 33 flat. HK Stamping tools are like jig-saw puzzles. You put the die-sections in that you need for each particular receiver being made. Many of the pieces are used for multiple receivers

Sourcing the material was the hardest part. 33 flats are thinner than G3 flats and finding the correct metric steel in the USA was impossible for the last couple years. We were not willing to sacrifice quality or strength, so we waited....but the wait is over.

HK93 HK33 RECEIVER FLAT, $129.95
https://www.robertrtg.com/store/pc/H...T-106p2212.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #63  
Old 07-20-2021, 7:47 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: AK47 30RD STEEL MAGAZINES, 2 GRADES, FROM $15.99

European military AK47 30rd 7.62x39mm surplus magazines.

P-F grade. Poor - Fair. Most of these have surface rust and didn't meet the grade of our previous offering. Some have heavier corrosion and some have dents. 95% of these mags will work perfect as-is. The rest will need some extra TLC or to get a dent knocked out to function correctly. It's the luck of the draw!

G-E grade. Good - Excellent. They are a mixed bag so it's the luck of the draw. Photographs are of some of the worst condition mags you could possible receive. All are in perfect working order and most are nicer than pictured.

Polish Military production magazines, one of the best Soviet producers. For those in ban states all mags are made prior to the 1994 magazine ban. Mags may have mild surface rust but nothing that won't clean up nicely with a little TLC and elbow grease. These durable, high quality mags are as good as they get. Stock up while you can.

AK47 30RD STEEL MAGAZINE, P-F, $15.99
https://www.robertrtg.com/store/pc/A...F-164p8436.htm


AK47 30RD STEEL MAGAZINE, MILITARY ISSUE G-E, $19.99
https://www.robertrtg.com/store/pc/A...E-164p1632.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #64  
Old 07-21-2021, 6:27 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: FAB DEFENSE AK ALUMINUM QUAD RAIL W/ SCOPE MOUNT, $351.35

The most rigid platform available today for AK.

Advantages:
Unique mounting system totally eliminates movement of the system in any conditions.
Optic rail is removable.
Designed for hard military use.
Modernizes the AK-47/74.
Precision machined from solid blocks of aviation-grade 6061 T6 aluminum and hard coat anodized.
MIL-STD-1913 rails.
Drop-in installation.

Due to a wide variety of AK models assembled by various manufacturers and individuals from different combinations of new and surplus parts, we cannot guarantee perfect fit on all AK rifles. This product was designed specifically to fit Russian-made rifles. Some rifles may require slight fitting of this product or of the rifle.

Will not fit Yugo M70 rifles or clones.

FAB DEFENSE AK47/74 ALUMINUM QUAD RAIL WITH SCOPE MOUNT, $351.35
https://www.robertrtg.com/store/pc/A...NSE-5p4397.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #65  
Old 07-22-2021, 6:35 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: GALIL 30RD 5.56 MM .223 MAGAZINE, SURPLUS VG, $19.95

Galil 5.56x45mm 30rd Magazine. IMI Production, Israeli army issue mags. Condition is surplus good to very-good. Overall nice mags.

GALIL 30RD 5.56 MM .223 MAGAZINE, SURPLUS VG, $19.95
https://www.robertrtg.com/store/pc/G...G-306p7492.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #66  
Old 07-23-2021, 6:41 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: B&T SIG SG 551/556 QUAD RAIL HANDGUARD NEW, $549.95

B&T quad rail Picatinny handguard for SIG 551 and SIG 556 rifles. Hard to find, military grade, Swiss made accessory for your valuable SIG rifle.

B&T SIG SG 551/556 QUAD RAIL HANDGUARD NEW, $549.95
https://www.robertrtg.com/store/pc/B...EW-20p3150.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #67  
Old 07-26-2021, 7:01 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default SALE! B&T MP5 LED LIGHTED RAILED FORGRIP HANDGUARD, $499.95

ON SALE! 1 LEFT. RETAIL $595.95 - NOW $495.95!

Swiss made, military grade B&T MP5, HK94 LED lighted handguard with left and right removable Picatinny rails and aluminum foregrip. Foregrip is also removable. All polymer and aluminum construction. B&T Switzerland is a world leader in arms innovation. This same handguard is in use by several militaries around the world. Buy with confidence; B&T is the best of the best.

B&T MP5 LED LIGHTED RAILED FORGRIP HANDGUARD, $499.95
https://www.robertrtg.com/store/pc/B...D-124p3316.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com




__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #68  
Old 07-27-2021, 7:17 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: AUTO-ORDINANCE THOMPSON MAGAZINES & DRUMS, NEW...

AUTO-ORDNANCE THOMPSON 1927A1 .45ACP 5RD MAG NEW, $59.95
https://www.robertrtg.com/store/pc/A...W-313p8128.htm


AUTO-ORDNANCE THOMPSON 1927A1 .45ACP 20RD MAG NEW, $66.95
https://www.robertrtg.com/store/pc/A...W-313p6947.htm


AUTO-ORDNANCE THOMPSON 1927A1 .45ACP 30RD MAG NEW, $66.95
https://www.robertrtg.com/store/pc/A...W-313p6948.htm


AUTO-ORDNANCE THOMPSON 50RD DRUM MAG NEW, $269.95
https://www.robertrtg.com/store/pc/A...W-313p6949.htm


AUTO-ORDNANCE THOMPSON 100RD DRUM MAG NEW, $549.95
https://www.robertrtg.com/store/pc/A...W-313p6950.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #69  
Old 07-28-2021, 6:54 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: MIDWEST INDUSTRIES FOLDER WITH LIGHT WEIGHT STOCK, $159.95

MI Side folding light weight stock. Attaches to any M1913 picatinny receiver. Great quality, US made part from a brand you can trust.

MIDWEST INDUSTRIES PICATINNY SIDE FOLDER WITH LIGHT WEIGHT STOCK, $159.95
https://www.robertrtg.com/store/pc/M...OCK-4p8686.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #70  
Old 07-29-2021, 6:49 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: BCM GUNFIGHTER MOD 1 SOPMOD WIDEBODY MIL-SPEC STOCK KIT, BLACK & FDE, $127.90

Bravo Company, BCM GUNFIGHTER Mod 1 Stock, SOPMOD (Widebody), Storage Compartment, Black Stock kit complete with everything pictured. Bravo Company's BCM GUNFIGHTER Stock Assembly Mod 1 SOPMOD is the strongest light-weight polymer stock available for your mil-spec receiver extension. This stock features a Snag free Design with no sharp edges prevents tangling of the rifle with the shooter's sling, molle gear, or other kit. Storage compartment located in the toe of the stock, accessible through butt pad. Includes a Mil-Spec receiver extension, buffer, buffer spring, end plate and castle nut lock ring.

BCM GUNFIGHTER MOD 1 SOPMOD WIDEBODY MIL-SPEC STOCK KIT, BLACK, $127.90
https://www.robertrtg.com/store/pc/B...ACK-6p8683.htm


BCM GUNFIGHTER MOD 1 SOPMOD WIDEBODY MIL-SPEC STOCK KIT, FDE, $127.90
https://www.robertrtg.com/store/pc/B...FDE-6p8684.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #71  
Old 07-30-2021, 7:07 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: BRAVO COMPANY BCM MCMR-7 M-LOK HANDGUARD 7", $171.95

Bravo Company's BCM MCMR-7 M-LOK Compatible Modular Rail Handguard features the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard.

The MCMR Series of handguards gives the shooter modularity in the M-LOK platform. This proprietary patented mounting system (US Patent 8904691) includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system. It is made from Precision Machined Aerospace 6061-T6 Aluminum Alloy for high strength and is lightweight.

The proprietary engineered profile offers additional cross sectional strength. The actual length when measured to flare is 10.5 inches and is designed to be used with pistol length, carbine length, or mid length gas systems; all with a low profile gas block.

BRAVO COMPANY BCM MCMR-7 M-LOK HANDGUARD 7", $171.95
https://www.robertrtg.com/store/pc/B...uot-6p8682.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #72  
Old 08-02-2021, 7:25 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: WILSON FULL SIZE SS GUIDE ROD & EXT MAG CATCH, SIG P320

High quality SIG P320/WCP320 guide rod is precision machined from hardened stainless steel with a bead blasted finish. This rod is profiled to use a full-size 1911 recoil spring so you can easily tune your gun with commonly available springs, to the recoil impulse of your ammunition. We recommend a 14# spring for standard velocity/target loads and a 15# spring for standard/+P.

Wilson Combat Magazine Catch for SIG P320 / WCP320, Bullet Proof, Blued. This slightly extended magazine catch will ensure fast reloads without missing the low-profile factory P320 button. This fully machined metal version is guaranteed to never wear out after thousands of reloads. The perfect accessory to dress up your custom P320!

WILSON COMBAT GUIDE ROD FULL SIZE, STAINLESS FOR SIG P320 / WCP320, $18.95
https://www.robertrtg.com/store/pc/W...0-377p8439.htm


WILSON COMBAT MAGAZINE CATCH FOR SIG P320 / WCP320, EXTENDED, $37.95
https://www.robertrtg.com/store/pc/W...D-377p8440.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #73  
Old 08-03-2021, 6:51 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: FRANKLIN ARMORY BFSIII AK-C1 BINARY TRIGGER KIT FOR AK, $449.99

The Binary Firing System GEN 3 (BFSIII) is a 3-position trigger. In position three it fires one round on pull and one round on release, making it the fastest semi-automatic trigger on the market. This trigger is ideal for both tactical and competition use. The BFSIII provides significantly reduced split times between rounds, allowing for tighter groups.

Trigger Operation:

Position 1 – Safe –Will not fire
Position 2 – Semi – Fires 1 round per pull
Position 3 – Binary – Fires 1 round on pull and 1 round on release

FEATURES:

Release round can be canceled by simply moving our Patent Pending selector out of Binary mode while holding the trigger back
Easy to install
Positive reset on release phase
Great for competition shooters, tactical shooters, and recreational enthusiasts

FRANKLIN ARMORY BFSIII AK-C1 BINARY TRIGGER KIT FOR AK, $449.99
https://www.robertrtg.com/store/pc/F...-AK-5p6984.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #74  
Old 08-04-2021, 6:58 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: 3-PACK KRISS USA GLOCK 21 .45ACP +18RD MAG EXTENSION KIT, $79.95

3-Pack of Kriss USA +18rd mag extension Kits for your Glock 21 .45acp magazines. Kit has everything you need to convert (3) Glock 13rd .45ACP magazines into a 31rd extended mag. (Kriss calls these +18 conversion kits. 18+13 is of course 31rd. Witness holes on the back of the mag only go to 30rd. Won't really matter in the field, but just so you know).

Top quality components combined with your factory glock body make for an indestructible and sure-feeding mag.

Works with Kriss Vector .45acp, Glock model 21, 41, 29, 29SF and 40MOS.

3-PACK KRISS USA GLOCK 21 .45ACP +18RD MAG EXTENSION KIT, $79.95
https://www.robertrtg.com/store/pc/3...IT-14p8690.htm


GLOCK OEM .45 13RD MAGAZINE, MODEL 21 41, $23.95
https://www.robertrtg.com/store/pc/G...41-14p4435.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #75  
Old 08-05-2021, 7:00 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: HK21 RUBBER BUTTPAD FOR G3 PTR 91 C308, $39.95

Brand new HK21 Rubber Buttpad for your HK G3, HK91, PTR91. This HK contract buttpad is made on HK tooling using German spec materials. You cannot find a superior buttpad anywhere!

Compared to standard HKG3 buttpads the HK21 Rubber buttpad is made of softer material to ease felt recoil. Covers substantially more surface area which further spreads out felt-recoil over a larger part of your shoulder. Provides more comfortable shooting and more manageable recoil which can increase your rate of accurate fire!

Fits any standard HK A2 style fixed buttstock. Great replacement for your HK91, G3, PTR91, C308. Also great for HK33/93 rifles using buttstock assemblies that have a removable buttpad.

Don't be fooled by out of spec U.S. made copies that are known to break. This is the real deal; latest HK design built to survive the toughest battlefield conditions.

HK21 RUBBER BUTTPAD FOR G3 PTR 91 C308, $39.95
https://www.robertrtg.com/store/pc/H...8-219p1863.htm

__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #76  
Old 08-06-2021, 6:50 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: G.I. PATTERN 1911 GRIPS NEW, $5.95

New U.S. made plastic G.I. pattern 1911 grips. This is a great way to clean up an old gun without spending a ton of money. Checkered pattern provides a sure grip.

G.I. PATTERN 1911 GRIPS NEW, $5.95
https://www.robertrtg.com/store/pc/G...EW-188p152.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #77  
Old 08-09-2021, 6:47 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: AKM TOP COVER NEW, AC-UNITY, $23.95

AC-Unity AKM ribbed top cover new. Brand new part, perfect for your AK47, AKM or AK74.

AC-Unity started producing steel AKM parts for military refurbishment contracts they won over the last decade. All parts are made off Russian blueprints using Russian steel.

We slapped these on a couple Bulgarian and Polish AK's and they fit perfectly!

AKM TOP COVER NEW, AC-UNITY, $23.95
https://www.robertrtg.com/store/pc/A...ITY-4p7284.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #78  
Old 08-10-2021, 6:25 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: GRIFFIN ARMAMENT M2 SIGHTS FRONT & REAR, INCLUDES 12 O'CLOCK BASES, $157.00

Griffin Armament, M2 Sights, Front/Rear Folding Sights, Fits Picatinny Rails, Matte Finish, Includes 12 O'Clock Bases

M2 Sights Front and Rear
17-4 Stainless steel
Melonite QPQ treated
Anle plates and 12 o'clock plates included
Fasteners included
A2 sight post compatible

M2 Sight Kit- Griffin Armament is proud to introduce affordable Micro Modular Sights (M2) compatible with Picatinny rail systems. Griffin M2 sights offer an industry first, patent pending, modular base plate system. Constructed from QPQ Treated 17-4 and ordnance grade steel, Griffin M2 Sights were designed to be the correct product for every backup sight application. A shooter can use these durable, low profile sights in a 12 o'clock mounted application while having the flexibility to reconfigure them to ambidextrous 45 degree angle sights using the alternate and available angle plates. This flexibility ensures these sights can be used by anyone and will never end up in a box of undesirable legacy kit. The full M2 deployment kit includes the front and rear sight assemblies as well as both vertical and angled bases for a complete modular system. However, sights and bases are available separately for users who wish to buy parts as needed. The front A2 sight provides elevation adjustment while ensuring maximum aftermarket support for your favorite post, be it tritium, fiber optic, match grade, or otherwise. An extremely low profile, snag resistant, slotted rear windage screw, affords easy but more importantly secure adjustability. Robust spring tension of both front and rear flip up assemblies ensures accurate repeatability every time the sight towers are actuated. Never before has a product in this category offer this degree of flexibility. Griffin M2 Sights have a minimal foot print, and are among the smallest backup sights on the market. For a mere 2 and half ounces your rifle can be equipped with a durable iron sight system, to provide aiming capability in rain, snow, or fog, on or off axis without dependence on batteries or glass.

GRIFFIN ARMAMENT M2 SIGHTS FRONT & REAR, INCLUDES 12 O'CLOCK BASES, $157.00
https://www.robertrtg.com/store/pc/G...SES-6p8700.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #79  
Old 08-11-2021, 6:45 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: ED BROWN 1911 REBUILD KIT, BLUED FINISH, $19.95

Top of the line Ed Brown 1911 Rebuild Kit with Blued Finish. Intended for Blued or black finished guns.

Includes Mainspring Cap, Mainspring Housing Pin Retainer, Hammer Strut Pin, Hammer Pin, Sear Pin, Mainspring Cap Pin, Magazine Catch Lock, Safety Lock Plunger Assembly, Barrel Link Pin, Ejector Pin, Mainspring Housing Pin, 19# Mainspring, Mag Catch Spring. Every pin and spring needed to rebuild or complete a 1911 style frame.

All brand new parts from a name you can trust. Made in the USA!

ED BROWN 1911 REBUILD KIT, BLUED FINISH, $19.95
https://www.robertrtg.com/store/pc/E...H-188p7987.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #80  
Old 08-12-2021, 6:27 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: GEISSELE MK4 SUPER MODULAR RAIL 9.5" M-LOK, BLK & FDE

Geissele Automatics, MK4, Super Modular Rail, Handguard, 9.5", M-LOK, Includes Barrel Nut.

The Super Modular Rail (SMR) MK4 M-LOK is Geissele's ultra-lightweight M-LOK handguard option. These rails are purpose-built and feature integrated short M1913 picatinny rail sections at the fore of the rail in the 3, 6, and 9 o'clock positions. Maximum venting for heat dissipation also dramatically reduces the rail's overall weight, while maintaining its same strong and rigid platform. It utilizes Magpul's M-LOK technology at the 3, 6, and 9 o'clock positions, as well as the upper 45 quadrants. The SMR MK4 is both versatile and modular, allowing the user to tailor their platform to his or her unique needs. The SMR MK4 also features Geissele's proprietary 2.25" long barrel nut. This increases the surface contact where the rail interfaces with the receiver and creates a platform that can be trusted to be straight and true the entire length of the free float rail. This increases accuracy and zero repeatability during disassembly and reassembly when performing maintenance.

GEISSELE MK4 SUPER MODULAR RAIL HANDGUARD 9.5" M-LOK, DESERT DIRT COLOR, $299.95
https://www.robertrtg.com/store/pc/G...LOR-6p8706.htm


GEISSELE MK4 SUPER MODULAR RAIL HANDGUARD 9.5" M-LOK, BLACK, $274.95
https://www.robertrtg.com/store/pc/G...ACK-6p8711.htm


GEISSELE BARREL NUT WRENCH, $8.95
https://www.robertrtg.com/store/pc/G...NCH-6p8712.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 8:37 AM.




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2021, Calguns.net an Incorporated Company All Rights Reserved.
All opinions, statements and remarks made by Calguns.net on this web site and elsewhere are solely attributable to Calguns.net.



Seams2SewBySusy