Magpul Stock Lock Pin Now Available

[Aim Sports Inc.]

The Aim Sports Designed Magpul Stock Lock Pin is now available for purchase through our website and can he found here:

https://aimsportsinc.com/platforms/a...-lock-pin.html

[Sigbird]

Best product bar none for pinning your Magpul stock @ $11 to your door.

[damngato]

Going to give it a shot, order placed. Will report back

Thank you sir for you purchase. Please post up some pics if you get a chance.

[Aim Sports Inc.]

Here is a step by step guide on how to install the Stock Lock Pin on the STR Series Magpul Stocks.

[Aim Sports Inc.]

Here is the standard Install Guide for the Magpul Stock Lock Pin

[damngato]

This product is good to go! Thank you for the above pictures as my STR would have baffled me. Easy to install and works like a charm. Will be ordering more. If I can do it anyone can!

[UberPatriot]

Couldn't you just fill the space in the existing pin to prevent it's movement?

I'll try a tiny wedge in the slot below the roll pin.

Originally Posted by UberPatriot

Couldn't you just fill the space in the existing pin to prevent it's movement?

I'll try a tiny wedge in the slot below the roll pin.

I'm sure there is a million and 1 ways to block a stock. However, this is a 1for1 replacment that doesn't need drilling, gluing, epoxy, extra pins, screws, a trip to the hardware store, or anything other than the OEM parts.

ETA: admittedly I look for any excuse for a trip to the hardware store.

Originally Posted by damngato

This product is good to go! Thank you for the above pictures as my STR would have baffled me. Easy to install and works like a charm. Will be ordering more. If I can do it anyone can!

Awesome, glad to hear it helped!!

[damngato]

Originally Posted by george@aimsportsinc.com

Awesome, glad to hear it helped!!

Any directions for installing on and ACS? Saw it listed on the site but not sure best way to get to everything.

[Aim Sports Inc.]

Magpul ACS Stock disassembly

1. Remove buttstock
2. Slide storage compartments out
3. Remove Friction Lock Roll Pin
4. Follow standard instrustions

[Aim Sports Inc.]

These are back in stock. https://aimsportsinc.com/magpul-stock-lock-pin.html

[stitchnicklas]

Used this pin as a component in pinning a regular stock also in building a featureless for a customer.to extra roll pinsand deconstructing the existing pin system came out with a good look

Originally Posted by stitchnicklas

Used this pin as a component in pinning a regular stock also in building a featureless for a customer.to extra roll pinsand deconstructing the existing pin system came out with a good look

Very Cool..

We also have our M4 pins that work with that stock.

[Mesa Defense]

Does this work with SL stocks?

Originally Posted by Mesa Defense

Does this work with SL stocks?

Yes they will work with the sl line of stocks.

[dat1callidude]

Tag

[rider1deep]

Where are the STR instructions? I'm ready to purchase, but I want to make sure I know what to do beforehand.

[KT_SF]

OP, the installation guide pics that were originally in Posts #5 and #6 above are no longer appearing (and the aimsportsinc.com website currently doesn't appear to provide installation instructions either).

KT

[wpage]

Why not just drill and tap it off with a pin and split ring?

not sure what happen to our instructions but here are the STR instructions.

Magpul_Pin_Guide_STR.jpg

[PoorMan]

Do you have instructions for the CTR?

[PoorMan]

I was able to figure it out without instructions. Pretty simple if you take your time. I am quite pleased by the end result and cost effectiveness of this product.

Like Sigbird noted, the top hole is a little too small to accept the upper pin so you will have to drill it. This added about 2 mins to the process for me.

Originally Posted by Sigbird

Best product bar none for pinning your Magpul stock @ $11 to your door. Keeps the factory look and your stock won't move a MM. FYI, You will need to clean up the top hole with the same diameter drill bit for the upper pin to fit. Otherwise 5 min to install.

[October]

Anyone done this on an ACS stock? I can not figure it out

Originally Posted by October

Anyone done this on an ACS stock? I can not figure it out

ACS stock is in post #12. Pm me if you need any help with it.
Thank you

[Danodog]

Originally Posted by george@aimsportsinc.com

ACS stock is in post #12. Pm me if you need any help with it.
Thank you

I am having problems with removing the storage compartment covers on the ACS stock. The photos above do nothing for me. Any ideas?

EDIT: I realize that I have an ACS L stock. Is the pin comparable with the light version of the ACS?

Originally Posted by Danodog

I am having problems with removing the storage compartment covers on the ACS stock. The photos above do nothing for me. Any ideas?

EDIT: I realize that I have an ACS L stock. Is the pin comparable with the light version of the ACS?

Hello Sir,
Our pin is compatible with the ACS-L. Installing it is just like the CTR stock where you need to remove the friction lock roll pin to access the plunger. I responded to your other thread and hope it worked out. If you have any other questions please PM me.
Thank you

[FDE226]

Hi George,

Will your Daniel Defense Pin kit work with Magpul stocks as well?

Originally Posted by FDE226

Hi George,

Will your Daniel Defense Pin kit work with Magpul stocks as well?

FDE226,
Sorry but the Daniel Defense stock pin will only work with Daniel Defense stocks. We have a Magpul specific pin for their stocks.

[FDE226]

Thanks George, I installed the Magpul pin this week. Works great, easy install, and it's cheap!

[WHH]

Has anyone tried one of these pins in a Luth-AR carbine stock?

[ttn333]

Are there clearer instructions for Daniel Defense? I'm having a heck of a time trying to install this pin.

[WHH]

Originally Posted by WHH

Has anyone tried one of these pins in a Luth-AR carbine stock?

Reporting in to note that this does work, but the screw is too long. Either trimming it or replacing it with a shorter one will do the trick.

[Nesproc]

Has anyone removed the pin from an STR without drilling the rivets?

[damndave]

Just ordered one for my STR. Let's see how this goes.

[damndave]

Install took about 30-45 minutes. Wasn't too hard but is a decent amount of work. Does the job fine.

[FlyingShooter]

....

[ParaLarry]

Went looking for it but page not found.
Took some digging but found it and ordered.