*Benelli M4 thread*

[FLAWLS1]

Post them up! I'll be posting mine when I get it.

[Bert Gamble]

Got one. If you want to see a pic, look at the one on the website. Mine looks exacly like that one.

Why mess with perfection?

[Ventura_Yak'r]

[Mesa Tactical]

Originally Posted by Bert Gamble

Got one. If you want to see a pic, look at the one on the website. Mine looks exacly like that one.

Why mess with perfection?

Because the stock is too long!

[Bert Gamble]

Originally Posted by Mesa Tactical

Because the stock is too long!

Are you a dwarf or were your arms shortenend in a terrible wood chipper accident? How can the stock be too long?

Admittedly I am not an expert in shotguns, or any gun for that matter, but the M-4 is the most natural feeling gun I have ever had the pleasure to fire. I don't think I would want the stock shortened even a little bit.

[FLAWLS1]

Originally Posted by Ventura_Yak'r

That looks good! What extended tube is that? Is it from Kip?

[Saym14]

Originally Posted by Bert Gamble

Got one. If you want to see a pic, look at the one on the website. Mine looks exacly like that one.

Why mess with perfection?

and the stock tube is low capacity...
and the stock bolt release is too small
and there is no front rail if you want a weapons light mounted



mesa stock
Fab forearm
GGG bolt release
Kips extended tube and follower

[Ventura_Yak'r]

Originally Posted by FLAWLS1

That looks good! What extended tube is that? Is it from Kip?

Thanks, Full Length 7rd Titanium Magazine Tube from Kip at Carrier Comp. Made compliant/922(R) w/ US made hammer, follower & spring.

[Moraga]

I am trying to buy and M4 and want to make sure it it CA legal. What do I have to know?

[Mesa Tactical]

Originally Posted by Moraga

I am trying to buy and M4 and want to make sure it it CA legal. What do I have to know?

Don't put a collapsing stock on it.

[MXRider]

Originally Posted by Mesa Tactical

Don't put a collapsing stock on it.

You can run one so long as its pinned. The factory stock is too long IMO.

Sent from my PC36100 using Tapatalk 2

[Dreaded Claymore]

Originally Posted by Mesa Tactical

Because the stock is too long!

Originally Posted by Saym14

and the stock tube is low capacity...
and the stock bolt release is too small
and there is no front rail if you want a weapons light mounted

And it has no bayonet lug!

[Saym14]

Originally Posted by MXRider

You can run one so long as its pinned. The factory stock is too long IMO.

Sent from my PC36100 using Tapatalk 2

I agree I like the shorter stock thats why I got the Mesa tactical. I would love the collapsable benelli stock but its very $$$$ and I would have to pin it.

[FUBAR]

Benelli M4 has 13 parts that are on the 922r list. You need to bring it down to 10. The easiest way is to change:

1) Full Length 7rd Titanium Magazine Tube from Kip at Carrier Comp or Dave's Metal Works BEN012 Mag Tube
2) Dave's Metal Works Follower
3) Mesa Tactical Urbino Stock

[FLAWLS1]

Originally Posted by FUBAR

Benelli M4 has 13 parts that are on the 922r list. You need to bring it down to 10. The easiest way is to change:

1) Full Length 7rd Titanium Magazine Tube from Kip at Carrier Comp or Dave's Metal Works BEN012 Mag Tube
2) Dave's Metal Works Follower
3) Mesa Tactical Urbino Stock

From my understanding I thought that once you get an extended tube from Carrier Comp or Dave's etc. (U.S. made) you then have to change 3 parts on the 922r list to U.S. parts (extended tube not included). So basically what I'm saying is you would have a total of 4 U.S. parts.

[FUBAR]

If you replace the whole mag tube that in itself is a qualifying part.

[AM9000]

Nice boom sticks.

[FLAWLS1]

Here's mine...

[Saym14]

Nice - now you will have to post "after" pictures

[FLAWLS1]

Originally Posted by Saym14

Nice - now you will have to post "after" pictures

Indeed! I bought another M4 today brand new. I'm going to leave this new one all stock.

[ROCKETW19]

Originally Posted by Bert Gamble

Are you a dwarf or were your arms shortenend in a terrible wood chipper accident? How can the stock be too long?

Admittedly I am not an expert in shotguns, or any gun for that matter, but the M-4 is the most natural feeling gun I have ever had the pleasure to fire. I don't think I would want the stock shortened even a little bit.

X100 must be a midget!
I have the Cstock and before I pinned it I put it on the middle position and it was insanly to short. all the way out is perfect and i am only 6-0 tall

[ROCKETW19]

Eotech XPS2, kips top rail, Ti tube, follower, handle, hammer, FFT forend, Cstock, custom cerakote by Phantom finishing.

I must say the Eotech is not even fair. I pick up the paper target bad guys and slap slugs in there heads retarded fast.

[FLAWLS1]

Originally Posted by ROCKETW19

Eotech XPS2, kips top rail, Ti tube, follower, handle, hammer, FFT forend, Cstock, custom cerakote by Phantom finishing.

I must say the Eotech is not even fair. I pick up the paper target bad guys and slap slugs in there heads retarded fast.

That looks great! I too don't understand how people think the factory stock is to long. I'm only 5'8" and it feels fine to me. I'll be getting the Mesa stock though for the limb saver.

[Saym14]

I am 5-10. the stock stock works for me ok but the shorter stock makes the gun faster to maneuver.

[FLAWLS1]

Here's pics of my twins.

[damngato]

Originally Posted by ROCKETW19

Eotech XPS2, kips top rail, Ti tube, follower, handle, hammer, FFT forend, Cstock, custom cerakote by Phantom finishing.

I must say the Eotech is not even fair. I pick up the paper target bad guys and slap slugs in there heads retarded fast.

That looks great!

[damngato]

Originally Posted by FLAWLS1

Here's pics of my twins.

Ridiculously jealous right now

[Socalpumpballer]

[AC45ACP]

VIDEO
http://www.youtube.com/watch?v=4xyH7TXjhaY

Carrier Comp Titanium Tube
Freedom Fighter Tactical
Charging Handle
Hammer
Follower
Hand guards
Side Armor Rail

[TZL]

Mesa Tactical Urbino stock w/cheek riser, side saddle and pictanny rail, Dave's Metal Works Speed Bar, Carrier Comp full length titanium tube, spring and follower, Freedom Fighter titanium charging handle, custom trigger job, Benelli Tritium night sights



My desert tan M4 has a black cousin that is going to get the Salient treatment with a standard "hunting stock" a la Costa

[john.t.singh]

what handguard and shell side saddle have people liked and used?

I got the carrier comp, now i'm looking to upgrade the hand guard and put on a side saddle... thanks!

[MoltoMario]

Untitled by mario.zumbo.3, on Flickr

[e46sc3]

Originally Posted by MoltoMario

Untitled by mario.zumbo.3, on Flickr

That's the United Sportsman club range ... What type of shot did they have you use to shoot there? Slugs?? and on the pistol range??

[MoltoMario]

Originally Posted by e46sc3

That's the United Sportsman club range ... What type of shot did they have you use to shoot there? Slugs?? and on the pistol range??

Yes they make you shoot slugs and you have to shoot at the pistol range. I usually shoot at the 25 yard one

[JamminJ]

Originally Posted by john.t.singh

what handguard and shell side saddle have people liked and used?

I use a Mesa Tactical six shell side saddle, very happy with it.

[TZL]

+1 same here

Originally Posted by JamminJ

I use a Mesa Tactical six shell side saddle, very happy with it.

[e46sc3]

Originally Posted by MoltoMario

Yes they make you shoot slugs and you have to shoot at the pistol range. I usually shoot at the 25 yard one

So they'll let you shoot at the longer pistol range too ... I have only seen people shooting their shotguns on the shorter range. Someday I'll get out there to shoot my M4.

[biloutkast]

So its okay to shoot slugs at 15 yard? I've been told 25 yards only. Nice boomsticks

[MrExel17]

I need that platform!

[usclee]

Does anyone have some good website for Benelli M4 accessories?