A CA P365 just got approved for roster??

[static2126]

Originally Posted by 36547

There shouldn't be any velocity change in this case. Both the spectre comp and OEM slides use an unported 3.1" barrel which should yield the same muzzle velocity in both cases.

You are rightm I should have mentioned that I run an xl slide on all of mine

[DProm]

Just got home from picking mines up. Some things I do notice not sure if it's me or a sig thing.

The slide release lever is a PITA to manipulate to release the slide unless I drop the mag first?

Manual safety a bit finicky, sometimes it switches smoothly, sometimes it feels jammed.

Take down lever will take some time to get use to. Does this work when the manual safety is off?

Now time to install the accessories that has been waiting for this day.

[36547]

Originally Posted by DProm

Just got home from picking mines up. Some things I do notice not sure if it's me or a sig thing.

The slide release lever is a PITA to manipulate to release the slide unless I drop the mag first?

Normal. Using the slide release with an empty mag you will be fighting the mag follower and spring. When the mag is loaded the slide release will work smoothly

Manual safety a bit finicky, sometimes it switches smoothly, sometimes it feels jammed.

Manual safety is stiff and will wear in with use. The left side feels a bit more crisp because that's the side the detent is on

Take down lever will take some time to get use to. Does this work when the manual safety is off?

I've found the takedown to be a bit finicky with these. There's a sear in the FCU that can lift if you turn the FCU upside down. It will block the slide from going on. There is also a mechanical link between the takedown lever and slide release

Now time to install the accessories that has been waiting for this day.

See above ^^