Non Traditional AK's (Not for Purist & wood people).

[FiveSeven]

It's OD (green).

[BradleyAbrams]

Originally Posted by xDIEGOx

Where did you get that stock? Looks good.

Thanx - It's from AK Builder.


-

[ClickClickPow]

Originally Posted by FiveSeven

It's OD (green).

Thanks, how high is the cheek weld on the CTR? Love your setup and just got a converted saiga in 223 used from LGS, I put it on lay away the week after sandy hook when I saw the run on guns happening, finally got her in my safe

[Cadre]

same one i posted here before. re-vamped.

[SaD Guy]

Saiga .223 (sporter style) & keeping it this way.

Camoclad vinyl wrap A-tacs FG - looks more green in real time than the tan finish in this photo.

Renegade buck AR adapter, Beryl style rails/peep sight, shortened butt stock with limb saver.

[MrPlink]

Sad guy, looks good (rifle and wrap)
Do you have any close up detailed pix, looks like the wrap is pretty good at letting detail through, I can see the checkering on the stock still.
Over all how do you like it?
Is it shiny or reflective at all?

[chead]

Originally Posted by SaD Guy

Saiga .223 (sporter style) & keeping it this way.

Camoclad vinyl wrap A-tacs FG - looks more green in real time than the tan finish in this photo.

Renegade buck AR adapter, Beryl style rails/peep sight, shortened butt stock with limb saver.

I love this. I've wanted a sported with a magwell adapter for so long

[Gutz]

Damn, that is awesome.

[SaD Guy]

Originally Posted by MrPlink

Sad guy, looks good (rifle and wrap)
Do you have any close up detailed pix, looks like the wrap is pretty good at letting detail through, I can see the checkering on the stock still.
Over all how do you like it?
Is it shiny or reflective at all?

I don't have any close up shots. I like the Camoclad sticker and would recommend it. Its easy to apply with a good exacto knife. Just measure and fit, then trim to exact size for each section of the rifle. Its a very thick sticker made with 3M material.

The finish is flat but it makes the rifle a bit more slippery.

Thanks guys for the compliments!

[jshoebot]

[H2O MAN]

[FiveSeven]

[SKSDan]

my saiga x39

[lndrova21]

My FA Cugir M-10 7.62 with sightmark reflex sight, RPB triangle fixed sock, solar tactical MFER mag funnel
<a href="http://s792.photobucket.com/user/lndrova21/media/image-1.jpg.html" target="_blank"><img src="http://i792.photobucket.com/albums/yy209/lndrova21/image-1.jpg" border="0" alt=" photo image-1.jpg"/></a>

[lndrova21]

Sorry guys

[BDavy]

calgun1.jpg Definitely not for the purist, but a home build I did for my wife.

[SOAR79]

That brake on the OP's gun looks great!

[FiveSeven]

Had this older Russian reflex sight once, sold it as I didn't have a good way to mount it. It was made only in 11mm dovetail mount.
The sights reticle is one large chevron and adjustment are very rudimentary, basically you sight it in (by using a laser bore sighter in my case) by loosening the optic screw and once it's sighted properly the screw needs to tightened back up and no further adjustments are required. I guess do to it's simplicity this makes it extremely rugged. AA battery consumption is exceptionally good for a 20+ year old piece of electronic.



Anyway, Few weeks ago I thought about a different mounting solution and happen to see the same sight on Ebay. I bought it since I had BP-02 mount. Removed the side-mount top rail, cut off reflex sight mount legs, drilled/tapped 3 screw and this is the end result. Very satisfied how it came out and I'd rate it better then Kobra for CQB type sight. Low profile as well.


The chevron looks much sharper in real life, it has about 6 brightness adjustments and even in bright sunlight its usable. The reticle is smaller than what these photos show (lens zoom affect), the top second photo is a bit more accurate in size).

[FiveSeven]

Recently converted Saiga.

[madjack956]

Originally Posted by 69Mach1

Nice job... I like em clean with no frills...

[guahan671]

My converted Saiga 7.62x39 and Echo1 OCW airsoft gun

[Glin1216]

Arsenal SLR-105

[FiveSeven]

^
Very nice setup, Good taste.

I have RD adapter on my 74 as well and I like it the best.

[studiojon]

My Lancaster build with some major upgrades just missing a bell and whistle.

[whlgun]

Originally Posted by studiojon

My Lancaster build with some major upgrades just missing a bell and whistle.

I wish I could find a bolton gas block

That is a beautiful build. This is almost exactly what I want my Romy G kit to turn into.

[Carsgunsandchics]

Originally Posted by whlgun

I wish I could find a bolton gas block

That is a beautiful build. This is almost exactly what I want my Romy G kit to turn into.

http://shop.venomtactical.com/collec...bpoukj2fj1s8o2

[whlgun]

Originally Posted by Carsgunsandchics

http://shop.venomtactical.com/collec...bpoukj2fj1s8o2

Thank you. I have been looking for one of these for a long time.

[takinflight33]

What handguard is that

[studiojon]

just a regular AK hand guard that I stippled myself..

[technique]

[MindBeyondAverage]

Originally Posted by Glin1216

Arsenal SLR-105

Which grip is that?

[Nicoman]

Originally Posted by technique

How about a picture of the whole rifle

[technique]

Originally Posted by nicoman

How about a picture of the whole rifle

This is all I have handy. I've put a fixed triangle stock on it since.
The gun is chambered in 300Blackout. I turned the barrel, it's a slightly heavier profile because I wanted to dimple the barrel. Since I made it heavy, I had to accommodate with a custom gasblock, I also made.

One of my favorite guns right now. I haven't wanted to strip it down an finish it because I like shooting it so much.

[hefedehefe]

Originally Posted by Glin1216

Arsenal SLR-105

What is that above the mag well

[FiveSeven]

[Caeser2001]

Originally Posted by Carsgunsandchics

http://shop.venomtactical.com/collec...bpoukj2fj1s8o2

So this just bolts on? Would I just use a crush washer behind the muzzle device?

[Carsgunsandchics]

Originally Posted by Caeser2001

So this just bolts on? Would I just use a crush washer behind the muzzle device?

Yes. Take a look how Rifle Dynamics uses them. http://rifledynamics.com/

[3RDGEARGRNDRR]

[G-Man WC]

Originally Posted by FiveSeven

Man I want a Beryl stock bad for my new polish build.
Nice rig.
-g

[JackRydden224]

That looks like a AR stock adapter plus ACE entry stock. I don't think the Beryl stocks have the foam on the stock.

Originally Posted by FiveSeven