Calgun's AR-15 Gallery

[integraracer157]

Upper: Bushmaster Varminter 20" upper fluted barrel, free float fore end.

Lower: RRA lar-15 With Dpms parts kit, DPMS collapsible stock and Promag grip.

Magazine is a c-products 10rnd

scope is a Bushnell i had laying around till i upgrade it.

used for 200yrd paper shredding, and can food destroyer @ 200yrds

[LAL6]

Upper: Rock River Arms Varmint A4
Barrel: Rock River 20" 1:8
Lower: JD Machine
Stock: ACE Skeleton
Magazine: Magpul 10/20
Use: Range, Varmints
Trigger: Jewell Two Stage
BCG: Young NM Chrome BCG, BCM Charging Handle
Grip: Hogue Pistol Grip, RRA Free float tube forend
Optics: Leupold Mark AR 4-12x40, Burris High XTR Rings
Bipod: Harris
Sling: Blackhawk

[LAL6]

Upper: BCM BFH
Barrel: BCM 16" Mid-Length 1:7
Lower: S&W M&P 15
Stock: Magpul MOE
Magazine: Magpul 10/30
Use: Range
Trigger: Daniel Defense Single Stage
Grip: Magpul MOE Foregrip
Sights: Troy Flip Up Battlesights

[Jimmy310]

Guys, this is my first AR i put together. Pretty generic but KISS keeps the weight down and money in the bank!



Upper: Rock River Arms LAR Midlength A2
Barrel: RRA 16" 1/9 twist Chrome
Lower: JD Machine
Stock: Colt M4 Retractable Buttstock
Magazine: 10/20 Promag
Use: Lightweight Duty/Patrol Weapon

[Tweaksalot]

My baby with my new glass!



Upper: BCM/VLTOR VIS-2A Midlength Monolithic
Barrel: BCM 16in 1/8 Twist Stainless steel
Lower: Spikes Zombie
Stock: Magpul CTR
Magazine: Pmags!
Trigger: Wilson Combat TTU Single Stage
Grip: Magpul MIAD
Forward Grip: Tango Down QD stubby
Optics: Acog RCO-M4 / Larue mount
Sights: Troy Flips Front and Rear
Bolt: Y/M National Match
Charging Handle: VLTOR/BCM Gunfighter Mod 4 tac latch
Muzzle: Battlecomp 2.0

[NokSuCow]

BCM 16" BFH Mid-Length w/Larue Tactical 12"
DSArms Spartan DSZM4RS Lower
Daniel Defense LPK
Spikes Tactical Nickel Boron BCG
BCM Gunfighter mod4
BCM Mil-Spec stock mounting kit w/ H2 buffer
Troy M4 Folding Battle sights (DOA rear)
Ergo Suregrip
Magpul ACS
Magpul AFG2
BB Convertible



Just need to add low profile rail covers, possibly 2 XT's. No optics until I shoot 1k at least rounds with BUIS.

[Mikeed]

Lower: ledesma arms
Upper: dpms
Xtm rail covers
Dpms trigger
Magpul pmags

[whoreable]

USMC Happy Suit, High Loft Jacket.
Adams Arms PDW 7.5

[Chron]

Upper: Spikes Tactical Flat Top Upper, Spikes Nickel Boron BCG
Barrel: 16" Midlength FN CHF Barrel 1:7
Lower: JD Machine Bear and Star (Calguns)
Stock: Magpul CTR
Handguard: Magpul MOE Midlength
LPK: Spikes Tactical Enhanced LPK
Sights: Rear - Troy folding battlesights
Other: Magpul BAD Lever

Upper was bought complete from AIM Surplus http://www.aimsurplus.com/product.as...ver&groupid=55

[dbbspider]

Upper: New Frontier
Barrel: Black Hole Weaponry SS 16" 1/8 twist
Lower: Calguns JD Machine
Stock: ERGO F93
Magazine: Magpul 10/30
Use: range and desert
Trigger: Gisselle SSA
Grip: Magpul w/ trigger guard
Rails: YHM Diamond Series Quad
Sightsaniels Defense fixed front & rear (A1.5)
Spikes ST-T2 heavy buffer
YHM Phantom Compensator / flash suppressor

[ghostman1960]

[docsmileyface]

M4 SOPMOD Block II build;

LMT 14.5" Defender 2000
KAC NT4 flash hider permanently attached by Marvin Pitts with a custom spacer to bring OAL to legal limits
KAC Taupe Flip Up Front Sight
Daniel Defense Mk 12 Low Profile Gas Block
Daniel Defense M4A1 RIS II
KAC RAS QD Heavy Duty Sling mount
Elcan Specter DR SU-230/PVS-C
Matech 600m BUIS
LMT SOPMOD stock
Vicker's Combat Application Sling

[mean403]

DTI upper/lower
RRA parts kit
Burris 3.5-9x40
Mydipkit.com diy camo kit (self dipped)

[Hammertime]

Peace is harder to make than I ever thought it would be....46 rounds, and some patience chasing them around, trying to make that stupid sign look good

Cheers.

Sorry:

DSA Zm4 upper
DD LPK
LAR lower
UTG quad rail
G.P.S. Grip Pod
Matech BUIS
Mako m4/ar15 stock
Palmetto State BCG
Palmetto State Buffer tube assy
Magpul 1 point harness
Magpul MOE grip
Magpul 10/20

[USMC720]

Stag Arms upper & lower
16" barrel with 1:9 twist
Magpul CTR Milspec stock
Magpul 10rd mag
Sport shooting & home defense
UTG quadrail (DI) with foregrip
Eotech Exps3-4 holographic with Eotech 3xmagnifier
Magpul Rear Flip-up sight
Guide Gear 240 lumens flashlight
Troy Ambidextrous bolt catch
Badger Ordnance Ambidextrous Charging handle

[Leoshik]

[sixzulu]

CMMG upper with 1/7 twist, 14.7" barrel and pinned/welded A2 flash hider
Aimpoint comp ML3 on Aimpoint QRP mount
Matech BUIS
RRA handguards and sling swivel
CMMG lower with DPMS guts
MA Parts stock and buffer tube
Springco blue heavy buffer and extractor springs
BCM H2 buffer
Specter Gear quick adjust 2-pt sling
10/30 USGI mag with UBBT

[223556]

Originally Posted by dbbspider

Upper: New Frontier
Barrel: Black Hole Weaponry SS 16" 1/8 twist
Lower: Calguns JD Machine
Stock: ERGO F93
Magazine: Magpul 10/30
Use: range and desert
Trigger: Gisselle SSA
Grip: Magpul w/ trigger guard
Rails: YHM Diamond Series Quad
Sightsaniels Defense fixed front & rear (A1.5)
Spikes ST-T2 heavy buffer
YHM Phantom Compensator / flash suppressor

Curious as to the iron sights being mounted backwards?! Im sure they work just as fine but was just wondering! Great clean looking build!

[gnomerspell]

Stag Arms Upper & Lower
16" barrel with 1:9 twist
MagPul MOE Buttstock Collapsible Mil-Spec Diameter AR-15 Carbine Synthetic Black
AR-Stoner Magazine AR-15 223 Remington 10-Round with Anti Tilt Follower Stainless Steel Black
Sport Shooting & Home Defense
MagPul MOE Handguard AR-15 Carbine Length Polymer Black
EOTech EXPS2-2 /w Flip to Side 3x Magnifier
Vltor BCM Gunfighter Mod 5 Large Charging Handle

[Droppin Deuces]

LMT, LMT, LMT, BCM.

This wasn't purchased as a complete rifle. I've had the LMT lower for a while, but recently picked up the 14.5" LMT upper and A2X flash hider to finish off the vanilla rifle I've wanted since the day I got into this bottomless money pit of a hobby.

-LMT Defender lower with standard trigger and stock
-LMT 14.5" "M4" carbine upper
-BCM A2X extended flash hider to make it legal.

[mspiredm3]

My two favorite "toys". My AR with my 900hp M3

[MustangSteveGT]

Setup for unwanted visitors

Setup for the range

DPMS free float hand guard upper
changed to 1:7 twist barrel with A2 flash hider and Spikes bolt carrier group to get rid of inconsistent and heavy fake suppressor barrel the upper came with.
TA-01 ACOG
Double Star complete lower
Timney 3 lb trigger
Hydraulic Buffer
Colt original equipment M4 buffer tube and butt stock and pistol grip

accessories:
SureFire M951 weapon light
Harris LM1A2 bipod
Knights Armament vertical grip
and Hogue picatinny cuff that bolts onto the free floar hang guard when I do want to use the accessories.

[Mr. Incognito]

WHAT I HAVE BOUGHT:
Magpul Rail Panels (Qty 4): $5.20 x4 of these: $20.80
Magpul Utility/Battle Stock: $201.40
Magpul Pistol Grip: $15.92
Magpul BAD Bolt Catch: $22.76
EOTech 512 Red Dot: $375
Gas Tube: $13
Blackhole Barrel: $200
Troy BattleRail TRX Extreme 11": $175
VLTOR MUR-1S Upper: $171
Troy Low Profile Gas Block: $35
Magpul Angled Foregrip: $35
PWS Flash Suppr. Compensator: $100
VLTOR BCM Gunfighter Charging Handle: $46
RRA Chromed Bolt Carrier Group: $130
Total Tax and Shipping: $100
Total: $1,640.88

WHAT I STILL NEED TO BUY:
Mega Lower: $193
Lower Parts Kit: $50
Timney Trigger: $190
Subtotal: $433
Total: $2073.88

[Mr. Incognito]

Also, if there's anyone here that lives in San Diego, and wants to shoot some rounds with their lower, through my upper this weekend please let me know. I'll buy the rounds, you can even keep the brass.

[richard310]

Originally Posted by mspiredm3

My two favorite "toys". My AR with my 900hp M3

mmm.. HPF E46. what stage kit?

[mrvash]

Upper: CMMG LE-Edition, CMMG CH w/Badger Ordinance Ambidextrous Tac Latch.
Barrel: CMMG, 16" WASP Finish M4 Profile, 1'9 Twist
Lower: CMMG, Stag LPK, Ambidextrous Safety Selector, Magpul BAD Lever, Badger Ordinance Ambidextrous Charging Handle Latch and Magpul MIAD Grip and KNS GenII Pins
Stock: Magpul CTR (Mil-Spec)
Magazine: Magpul PMAG 10/30
Use: SHTF and Range

Magpul RVG
Magpul MBUS GenII
VTAC 11" Free Float Rail w/ Troy SS Low Profile Gas Block

[bombadillo]

Hey, how do you like that handguard. I think that may be my next on the next varmint build I do.

[mrvash]

Originally Posted by bombadillo

Hey, how do you like that handguard. I think that may be my next on the next varmint build I do.

Me? if so, I love it! it's light, tough, sturdy and versatile.

[mspiredm3]

Originally Posted by richard310

mmm.. HPF E46. what stage kit?

Stage 2.5

[bombadillo]

Originally Posted by mrvash

Me? if so, I love it! it's light, tough, sturdy and versatile.

I had the JP VTAC handguard and loved it. Thing was tough as nails, versatile with adding rails here or there, and had it duracoated in "Titanium Gray" which looked really sweet with the upper assembly all duracoated.

[Arnelcheeze]

Stag Model 8
Stark Equipment pistol grip w/qd and vfg

[bombadillo]

I actually really liked my stark grip and would have gotten another if this lower I have didn't have an integrated trigger guard. great ergos, like the material, and quite the cool look.

[tacticalcity]

I'm not a fan, but they are a great way to salvage a lower when the trigger guard wing gets snapped off...happens often enough.

[Ruiner]

Originally Posted by mspiredm3

Stage 2.5

That M3 is a beast. Any more pics of it?

[xblax619]

Upper: Adams Arms Complete piston upper, carbine base model
Barrel: Adams Arms barrel?, 16", 1:7 RH
Lower: CMMG stripped lower, with Daniel Defense LPK
Stock: Magpul CTR
Magazine: C-Products 10-rd
Use: paper shredding, plinking, HD, SHTF

Trigger: standard
Grip: UTG ergo PG
Optics: none at this time
Sights: Troy fixed front HK-style and folding rear Di-optic battle sights
Bipod: n/a
Sling: Tactical 2-point Bungee sling (in the mail)
Light: none at this time, probably Streamlight TLR 1 or 2 in the future
Paint: none at this time

http://i1219.photobucket.com/albums/...1000000022.jpg

[bombadillo]

xblax619, check out boonie packer slings too. You may be able to sell the sling you get for what the boonie costs you. They're about $22.00 for their most expensive 2 pt adjustable, AND cinchable sling. 2 separate adjustments. I LOVE their slings for the money. Its what Vickers copied his off of. (people will argue with me on that but its true) THey're built like a tank and are really simple to use.

[NorCalHal]

[Capita159]

Nice Shots "NorCalHal"

Here is a new member to the family.
Built on spare and left over parts, I'll name it Green E.
Upper:
DTi barrel 1:9" twist 16" length and M4 flat top upper receiver.
Unknown heavy carrier, .223 bolt, charging handle, fore grip, and rear sight,
Troy Industries MRF carbine 7" rails,

Lower:
Mega Machine,
DPMS LPK and Mil-Spec buffer tube,
Magpul 10/30 mag,
Colt carbine stock with Viking butt pad,







Happy Shooting Everyone

[mike51392]

man i cant wait to build my ar - i have a double star lower in jail shes out the 16th and a model1sales kit coming my way

[tacticalcity]

Originally Posted by mike51392

man i cant wait to build my ar - i have a double star lower in jail shes out the 16th and a model1sales kit coming my way

Just a heads up. Model1Sales uppers have undersized posts for the takedown pins and have a lot of play/wobble that is considerably more than an accuwedge can fix on its own. Much more so than is considered normal for an AR.

Not to worry however, there is a fix that involves putting rubber O-Rings on either side of the receiver, between the upper and lower where the front pivit pin inserts. I don't remember the exact size of the O-Ring but it can be found at any hardware store and is dirt cheap. I am sure another member will remember where to find the online tutorial and post a link to it here. I tried searching for it, but my day job uses SonicWall to block out sites, which includes 90% of gun forums. Calguns is left alone for some reason.

I am not saying this to bash your rifle. I am saying it to let you know not to panic if your upper has the enourmous amount of play all the Model1Sales uppers that I have seen had. It is an easy and affordable fix.