![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
Semiauto Rifles Gallery Post pictures of your rifles and carbines here! |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
Please do not post anything in this thread other than A) a side shot of your California Legal .223 Evil Black Rifle, B) a completed parts form as follows:
At the minimum: Upper: Barrel: (company, length, twist) Lower: Stock: Magazine: Use: (try and keep it concise, ie “paper shredding @ 200 yards”) I encourage you to list anything attached to your rifle, some other ideas to include: Trigger: (company, pressure) Grip: (back, foreward if applicable) Optics: Sights: Bipod: Sling: Light: Paint: ADDITION: Quote:
![]() ![]() KEEP CHATTER OFF THIS THREAD PLEASE ![]() ![]() Last edited by janus408; 10-29-2009 at 9:39 PM.. |
#2
|
||||
|
||||
![]() ![]() Upper: Hk 416 Barrel: 14.5" barrel 1/7 Trigger: Timney 3lbs pull, AR10 hammer spring Lower: Spikes Mag Release: Raddlock Grip: Hogue Stock: Magpul CTS Magazine: Pmag 10/20 Optics: Trijicon Acog TA31TRD Use: Zombies.... and Angeles range paper at 100 and steel out to 600 |
#3
|
||||
|
||||
![]() ![]() Upper: Built by me...on Cerro forge Bolt: MP LMT Barrel: LMT, 1/7 twist, 14.5in M4 profile with OPS inc hider/collar combo for silencer mounting Trigger: Swap between stock/ RRA 2 stage depending on what I'm doing. Lower: Noveske (B) prefix so it is an LAR cut Grip: MIAD and tango down forward grip Stock: Vltor modstock / Milspec Magazine: P-Mags Optics: ACOG TA31F Sights: Matech rear / standard FSB up front Rail: Daniel Defense 7.0 lite rail Sling: Vtac (not pictured Other: Rail covers are Magpul XTM and ladder covers, Magpul B.A.D, Ambi safety selector. PRI gas busting charging handle. Use: It gets dirty and shoots a lot. Mainly carbine classes. Some range use. |
#4
|
||||
|
||||
![]() ![]() Upper: LMT (M&A) Barrel: LMT .750 profile Midlength (M&A) Lower: CMMG with Bullet Button Stock: M4 6 position Magazine: P-mag 10/20 and C-product 10rd Use: Range work and home defense Trigger: Standard Grip: Standard A2 Sights:UTG dedicated match rear (holding zero like a champ) Sling: DIY tac sling 3pt FSB mount: CAA polymer rail with weaver low ring. Light: Awaiting Fenix PD30 Muzzle Device: Standard
__________________
![]() Last edited by Cal-Irish; 10-19-2009 at 1:55 AM.. |
#5
|
||||
|
||||
![]() ![]() Upper:CMMG Barrel: CMMG. WASP. 16" Carbine Length. 1/9 Twist Lower: Grizzly-15 Stock: CAA CBS (Soon to be Magpul CTR) Magazine: Bushmaster 10rd Use: Paper Shredding/ Steel plate popping Trigger: Double Star Handguard: Magpul MOE Grip: Doublestar (Soon to be Houge) Optics: Vortex Strikefire 2x Red Dot Sights: Fixed Front. Pro Mag BURS
__________________
A mugger, even an armed one, can only make a successful living in a society where the state has granted him a force monopoly. -Marko Kloos |
#6
|
||||
|
||||
![]() ![]() ![]() ![]() 1) Upper: Stag 2T, XTM covers Barrel: 16" 1/9 twist CL Lower: Stag, Stag LPK Stock: Magpul CTR Magazine: Pmag 10/30 Use: Primary Optics: Aimpoint M2 BUIS: ARMS #40 LP Grip: Magpul MOE Vertical Grip: Tango Down 2) Upper: Spikes ST-22 w/ YHM spectre & fakecan Barrel: 16" 1/16 Lower: Calguns lower, RRA LPK Stock: Magpul ACS Optics: Fakepoint BUIS: MI flip ups Grip: Magpul MOE Vertical: Generic 3) Upper: POF 415x Piston w/ Predator Rail Barrel: 9.5" 1/8 Lower: Anvil Arms pistol lower "Stock": CAA saddle Optics: EOTech 512 w/ GG&G flip-up covers BUS: Magpul BUS Grip: Magpul MOE Etc: KAC Handstop Light: Fenix Tk11 4) Upper: WOA receiver, KAC 12" FF RAS Barrel: 18" WOA 1/7 w/ OPS Inc 12th brake & collar Lower: Calguns lower w/ RRA LPK Trigger: RRA 2 Stage NM Stock: Magpul ACS Grip: Magpul MOE Sights: Leupold mk. 4 LR/T 3.5-10x M3 (illum) on LT-104 mount Etc: ARMS #32 adapter w/ Harris bipod
__________________
Only two defining forces have ever offered to die for you: Jesus Christ and the American soldier. One died for your soul, the other for your freedom. Make your own hot wire cutter! My AR Profile Last edited by fonionrings; 11-16-2011 at 12:19 PM.. |
#7
|
||||
|
||||
![]()
** better pic to follow **
![]() ![]() ![]() ![]() ![]() Upper: Spike's Tactical 16" M4 CL Barrel: (CMMG, 16", 1:7) Lower: CMMG MOD4SA Stock: FDE MOE Magazine: PMag - Cproducts Use: Range Duty, Prairie Dogs, Trigger: Stag LPK Grip: FDE MOE Optics: Vortex Viper 6.5-20x50 PA Riflescope Sights: Troy BUIS
__________________
Looking for a 3" Magnum 870 $200-$250ish Last edited by Barbarossa; 07-12-2010 at 3:43 PM.. |
#8
|
||||
|
||||
![]()
Upper: LMT
Barrel: LMT, 14.5", 1/7 twist chrome lined. Flash Hider: Battlecomp 1.5 Charging Handle: LMT tactical charging handle BCG: LMT (pre-mim) full auto, BCM extractor upgrade kit. Rail: Daniel Defense 12.0 Lite, FDE Sights: MBUS front & rear Optic: ACOG- TA45-2 with Larue mount Lower: CMMG Maglock: CAL15 BS LPK: Daniel Defense Trigger: ALG defense ACT Stock: SOPMOD on CMT receiver extension. Buffer: H1 buffer Grip: Magpul MOE Magazine: PMAG Use: Carbine classes (5), jack of all trades go-to carbine. Current Round Count: 8,600 approx. (6-2012) ![]() Last edited by tomd1584; 06-24-2012 at 7:39 PM.. |
#9
|
||||
|
||||
![]()
Upper: RRA
Barrel: RRA 16" Midlength CL 1/9 twist. BCG: BCM Complete BCG Lower: Kaiser Defense Stock: M1S A1 Stock Magazine: C-Products 10rd Trigger: RRA 2-stage NM trigger Grip: Magpul MIAD basic Sights: Matech 600m BUIS Sling: Vikings Tactics 2-Point Padded Sling Optic: Primary Arms Gen2 Microdot ![]() Last edited by Davidoff; 01-28-2010 at 3:06 AM.. |
#11
|
||||
|
||||
![]()
Upper: DPMS M4 Flat top
Barrel: DPMS 16 inch 1:9 Lower: MEGA Stock: DPMS PARDUS Magazine:ProMag Rail: MI Carbine Length 2 Piece Optics: ACOG TA50-2 w/ La Rue Mount Sights: Matech CH: BCM GUNFIGHTER Sling: Viking Tactics 2 point w/ Lamb Mount Muzzle Device: Troy Medieval Muzzle Brake Trigger Guard: Magpul enhanced trigger guard Use: Destroying Pumpkins, Competition ![]() ![]()
__________________
"The God of War hates those who hesitate." Last edited by sspen003; 10-21-2009 at 9:52 PM.. |
#12
|
||||
|
||||
![]() ![]() Upper: Sabre Defense M5 Barrel: 16" 1:7 twist Lower: Smith & Wesson Stock: CTR milspec Magazine: pmags Use: “paper shredding @ 200 yards” Trigger: RRA Two Stage Match Sling: None yet Light: None yet Paint: None
__________________
![]() |
#14
|
||||
|
||||
![]() ![]() Sundevil Lower RRA 2-stage triger CMMG 18" upper; SS 1:8" chambered in 5.56 POF brake Daniel Defence Lite rail 12" YHM lo-pro gas block Magpul XTR pannels Magpul MIAD grip Stag A2 stock Burris XTR rings Falcon Menace 4-14x44mm FFP C-prod mag Harris Bipod non-swivel
__________________
![]() Last edited by Linus; 10-28-2009 at 11:48 AM.. |
#15
|
|||
|
|||
![]() ![]() Complete Upper: Wilson Combat Stainless 20", 1:9 twist Free Floating Rails: YHM Flash Suppressor: YHM Lower: Rock River Arms Trigger: Rock River Arms Trigger Guard: Magpul B.A.D Lever: Magpul Extended Take Down Pins: Brownells Bullet Button: Yes Stock: ATI Buffer tube & Spring: Brownells Magazine: XTA Tactical Systems 9rd Grip: CAA Back, CAA Forward Optics: AIM 2.5-10 x 40 w/ day & Night Sights: None at this time Bipod: Harris "not in photo" Light: AMP Laser/Light Combo Use: Home Defense & Target |
#16
|
||||
|
||||
![]() ![]() Upper: BCM complete upper Barrel: BCM 16'' midlength government profile BCG: BCM complete upgraded bolt CH: BCM MOD4 Gunfighter Flash: standard A2 birdcage Handguard: standard midlength (will upgrade later w/ DD Lite Rail) Lower: Superior Arms OLL Stock: Magpul MOE w/ assembly Magazine: Magpul PMAG 10/30 (waiting for UPS delivery) LPK: Armalite Trigger: standard Bullet Button: Prince50 BB w/ FreeLock Mini Kit Grip: standard A2 grip (upgrading to Magpul MOE waiting for UPS delivery) Front Sight: standard A2 front post Rear Sight: GG&G A2 BUIS Sling: Magpul MS2 w/ ASAP (waiting for UPS delivery) Light: none (probably Surefire) VFG: none (probably Tango Down w/ QD) Optic: none (probably Aimpoint M4 or Micro) Uses: range, plinking, SHTF
__________________
"1911 mag, twinkie, twinkie, cupcake, primary weapon mag" ![]() |
#17
|
||||
|
||||
![]() ![]() Upper: S&W M&PT Barrel: 16" 1:9 Twist Lower: S&W M&PT Stock: S&W Telescoping Stock Magazine: D&H Black Teflon Rebuild Sights: Troy BUIS Bipod: Harris Rail: Troy Mag Lock: Bullet Button Use: SHTF, Zombies, plinking @ 100-300yds |
#18
|
|||
|
|||
![]()
Here are some pix of my first build. Spent extra on was the Rock River LPK, I liked the grip and trigger pull.
CMMG Lower Rock River Match Grade LPK w/Ergo Grip DPMS mil spec stock assembly Foregrip Fab Defense T-Pod Magpul 20/10 Mag w/Magpul Loop Mag Assist Badger Ordnance Gen II Tactical Latch Yankee Hill Upper w/ * Mil. Spec. Forged 7075-T6 Aluminum YHM Flat Top Upper Receiver * Forward Assist * Mil. Spec. Bolt Carrier Assembly * 16" Chrome-Moly Vanadium Steel Barrel, Heat Treated to RC 25-32 * Chambered in 5.56 N.A.T.O., Chrome-Lined with a 1:7" Twist * YHM Diamond Fluting Improves Rigidity and Aids in Barrel Cooling * YHM Phantom 5C2 Flash Hider / Compensator * YHM Specter Length Diamond Handguard * YHM Forearm Endcap * YHM Low Profile Gas Block * YHM Forearm Mounted Flip Front Sight * YHM Flip Rear Sight First AR Buildf 022.jpg First AR Buildf 029.jpg |
#19
|
||||
|
||||
![]()
Upper:Stag 2H
Barrel: Stag 16", 5.56 NATO, 1:9" Lower:Stag-15 w/CMMG LPK Stock: DPMS? Commercial Spec 6pos. Magazine:Magpul PMAG FDE 10/30, Promag 10/20. Grip: Magpul MIAD FDE Sights: UTG Detachable Carry Handle Use: Target/Zombie shredding. ![]() ![]() |
#20
|
||||
|
||||
![]() ![]() ![]() Upper: No brand name, Government surplus? Barrel: Hi Standard, 14.5", pinned Vortex flash hider, chrome lined, 1:7 twist Lower: Kaiser Defense KR5 Stock: Magpul CTR Magazine: Magpul 10/30 with Ranger Plates Use: Range, plinking and HD Trigger Guard: Magpul MIAD Enhanced Trigger Guard Pistol Grip: Command Arms Accessories UPG16 Vertical Forward Grip: Command Arms Accessories FFG2 Optics: Eotech 512 with GG&G Lens covers Sights: Midwest Industries BUIS Sling: Magpul MS2 Rear Sling Mount: Magpul ASAP sling plate Forward Sling Mount: CQD-FSM Light: Surefire G2 LED mounted on La Rue LT 707-1 Handguard: Daniel Defense Omega 7.0 with ladder rails Charging Handle: Badger Ordnance Tactical Bolt Assist Device: Magpul BAD Last edited by SoCalRandy; 11-14-2009 at 5:46 PM.. |
#21
|
||||
|
||||
![]()
Well, I finally finished my first AR just the way I wanted. Here she is:
![]() Upper: Stag 2HT Lower: Kaiser Defense CalGuns state with Rock River Arms lower parts kit Grips: Ergo Ambi pistol grip; Tango Down vertical grip Stock: Magpul MOE Scope: ACOG TA31 replica Magazine: Magpul Pmag 10/30 Accessories: Magpul trigger guard, Yankee Hill carbine sling adapter, bullet button
__________________
Quote:
|
#22
|
||||
|
||||
![]()
UPPER: MEGA BILLET UPPER GEN 2
LOWER: MEGA BILLET LOWER GEN 2 BARREL: CMMG 16 INCH 1/7 TWIST 5.56MM STOCK: VLTOR MODSTOCK MAGAZINE: PMAG 10/30 USE: TARGET SHOOTING/HOME DEFENSE AGAINST ZOMBIES AND ETC... TRIGGER: RRA 2 STAGE NM GRIP: MAGPUL MIAD FLASH HIDER: SMITH ENTERPRISES VORTEX RAIL: VLTOR CASV-EL OPTICS: ACOG TA31 (REPLICA) SIGHTS: ARMS 40L BUIS LIGHTS: UNKNOWN WITH CAA LIGHT MOUNT CHARGING HANDLE: MEGA BILLET WITH BADGER ORDINANCE TAC LATCH GAS PISTON: OSPREY DEFENSE OPS-416 GAS PISTON KIT VERTICAL COMBAT GRIP:UTG FIVE POSITION WITH BATTERY COMPARTMENT RECEIVER END PLATE:GGG AMBI SLOT SLING END PLATE KNS GEN 2 HAMMER/TRIGGER ANTI ROTATION KIT Last edited by bigboy; 11-18-2009 at 9:30 PM.. |
#23
|
||||
|
||||
![]() ![]() Upper: Noveske Light Carbine Low Profile (complete upper) Lower: CMMG Stock: Magpul ACS Magazine: Pmag 10/20 Use: General purpose rifle LPK LMT Grip: Ergo Suregrip Optics: Aimpoint Comp C3 Optic Mount Bobro Engineering 150 Sights: Magpul MBUS (front and rear) Light: Jetbeam RRT2 Raptor Vertical Grip Bobro Engineering Shorty
__________________
![]() NRA Certified Pistol, Rifle & Refuse To Be A Victim Instructor American Marksman Training Group Visit our American Marksman Facebook Page Diamond Bar CCW Facebook Page ![]() NRA Memberships at Discounted fee |
#24
|
||||
|
||||
![]()
Well it’s got a Calgun lower, its a black style and is the same size as an AR so this is a valid entry (right)
![]() ![]() ![]() Here is what two cinderblocks look like after one 400gr round ![]() See the video here: http://www.youtube.com/watch?v=rFd4UjUI5Mg Upper: Alexander Arms Barrel: 16” Lower: Calguns lower # (250ish) Magazine: Alexander Arms 10rd of .50 or 30 rounds of 223 / 556 Use: Home & family protection. |
#25
|
|||
|
|||
![]() ![]() ![]() ![]() Upper: CMMG Mid length Barrel: 16", 1/7 twist, .223 (might be 5.56, have not checked) Lower: LAR Grizzly Multical Stock: DPMS A2 stock Magazine: Pmag 10/30 black windowed Sights: Daniel Defense A1.5 fixed rear sight LPK: DPMS Other: Enhanced AR-15 rear take down pin? Not sure what it is called, but it can be seen in my last pic. Overall nice, easier to pull out but would get in the way for an ambi safety. Came with the rifle. Use: Slaughtering paper and dirt Last edited by Flogger23m; 12-04-2009 at 11:16 AM.. |
#26
|
||||
|
||||
![]()
Upper: VLTOR - MUR 1A
w/ CMMG Bolt Carrier & Badger Gen 2 Tactical Barrel: BCM 18" Chrome-Lined 1/8 Twist w/ Midwest Low Pro Gas Block Flash Hider: Smith Vortex Lower: Mega Stock: MagPul - MOE Magazine: P-Mag 10/20 Use: Don't know but I'm gonna find out this weekend. Rail: Daniel Defense 12.0 Lite-Rail Optics: Aimpoint Clone 3x Magnifier & Primary Arms Red-Dot |
#27
|
||||
|
||||
![]() ![]() Upper: Sabre Defence M4 Carbine 16" Barrel: Sabre Defence 1:7 twist Lower: Kaiser Defense Stock: Magpul ACS, BCM H2 buffer and Mounting Kit Magazine: Magpul 10/30 with a Magpul Use: Fun, SHTF Trigger: from CMMG LPK Grip: Magpul MIAD VFG: UTG Smart Foregrip Optics: L3 EOTech 552.A65 Rev F Sights: Matech BUIS Handguard: Midwest Industries MCTAR-17, Magpul Rail covers |
#28
|
||||
|
||||
![]() Upper: Cerro Forge Barrel: 16" 5.56 Bravo Company BFH with PWS FSC556 in 1:7 twist BCG: Forged BCM /w Gunfight MOD 4 CH Handguard: Daniel Defense 12.0" Lite in Dark Earth Lower: Kaiser Defense /w Magpul BAD Lever Stock: Magpul CTR milspec /w standard buffer & spring Magazine: PMAG or USGI (depends on use) Use: Carbine/Tactical drills & classes, SHTF Trigger: Geissele SSA /w Magpul enhanced trigger guard Grip: Magpul MOE & LaRue UDE FUG Optics: Trijicon ACOG TA31F Sights: Troy BCM front & rear BUIS Sling: LaRue 2-point QD Rail panels: Magpul UDE XTM Paint: UDE (urban dark earth)
__________________
The fate of the wounded rest in the hands of the ones who apply the first dressing. Last edited by NiteQwill; 07-07-2010 at 9:19 AM.. |
#29
|
||||
|
||||
![]()
Upper: CMMG 14.5 Inch M4A1 SOCOM upper
Barrel: Heavy Barrel. 1/7 twist Lower: Stag 15 Stock: Cheap 6 Position stock from TheTic00 at arfcom. Magazine: Magpul Pmag and some Stainless STANAG mags. Trigger: Stock Stag LPK Grip: Magpul MIAD. Random VFG Optics: EOTECH 512 with GG&G Flip covers Sights: GG&G Front and rear spring loaded BUIS Sling: Blackhawk SWIFT sling/ Light: Fenix TK10 Light Mount: Daniel Defense offset mount with thumb screw. Paint: Anodized. Bolt: EGRESS Bolt Upgrade. Full auto carrier. Extended/Polished ramps. Gas Block: YHM Low Profile. Rail: YHM Lightweight Spectre length free float rail. Rail Covers: Magpul Ladder style. Flash Hider: YHM Phantom 5C2 Bolt Catch Assist: Magpul BAD. Bullet Button: Freelock Use: Zombie Defense. 3 Gun comps. Neighborhood watch after the impending financial collapse.
__________________
"Please use the comments to demonstrate your own ignorance, unfamiliarity with empirical data, ability to repeat discredited memes, and lack of respect for scientific knowledge. Also, be sure to create straw men and argue against things I have neither said nor even implied. Any irrelevancies you can mention will also be appreciated. Lastly, kindly forgo all civility in your discourse . . you are, after all, anonymous." -Barry Ritholtz Help be a better advocate for the 2nd Amendment here. Last edited by Booshanky; 12-21-2009 at 4:35 PM.. |
#30
|
||||
|
||||
![]() ![]() Upper: BCM Rail: DD Lite 9 Barrel: BCM , 16" M4 Profile , 1/7 twist BCG: LMT Lower: Stag Stock: Magpul MOE Magazine: Cproducts 10rd Use: Truck Gun , Plinking , Steel/Paper Killer , Spotlighting Rifle , General Use Trigger: DPMS , factory Grip: Magpul MOE FDE Optics: EOtech 512 Sights: Troy Ind. Flipup front and rear FDE Bipod: Harris with LaRue QD Sling: MS2 and ASAP plate Forearm: Magpul Rail Covers FDE Flash Hider: YHM Phantom 4port
__________________
Last edited by SLYoteBoy; 01-10-2010 at 9:07 PM.. |
#31
|
||||
|
||||
![]()
Version 2.0
![]() Upper: DD A4 w/ M4 Feedramps Barrel: 16″ Cold Hammer Forged, 5.56 NATO Chamber, 1:7, Chrome Lined Flash Hider: A2 Birdcage BCG: F/A BCG, HP and MPI Tested, Shot Peened Bolt, Extractor Booster, Properly Staked Gas Key by Daniel Defense Rail: Daniel Defense Omega X 12.0 FSP Sights: Daniel Defense A1.5 rear, F marked FSB Optic: None at the moment Lower: Kaiser Defense-Calguns State Outline LPK:M&A Parts w/ Ambi selector added and Gen. 2 Raddlock (FDE) Trigger: Factory Stock: Magpul CTR, OD Green on Stag receiver extension. Magpul ASAP. Grip: Magpul MOE, OD green Magazine: Magpul 10/30's and C-products 10 round (not pictured) Other: Magpul Enhanced Trigger Guard, AFG, and XTM Panels, ERGO Rail Ladders Use: Zombie Apocalypse....and hopefully a tactical carbine class by end of '10
__________________
MY AR Profile #1
Last edited by Rukus; 01-15-2010 at 5:43 PM.. Reason: Version 2.0 Updates |
#32
|
||||
|
||||
![]() ![]() ![]() ![]() ![]() ![]() LMT MRP 16'' 1/7 Doublestar lower DPMS Mangonel BUIS Magpul Miad Tangodown stubby ACE ARFXE Stock VLTOR Light mount Surefire G2 AAC Blackout FH Trijicon Tripower w/ wilcox mount LMT BCG/Charging handle Magpul Pmag 10/30 Use- Short to medium range engagements
__________________
"REPR" Is a buzzword (buzzacronym) I cant wait to see float off into "made up useless term" heaven. http://www.calguns.net/calgunforum/s...3&postcount=35 Last edited by xaaronx; 02-26-2010 at 12:58 AM.. Reason: ETA |
#33
|
||||
|
||||
![]() ![]() Upper: Noveske N4 Light Carbine Low Profile Barrel: N4 14.5" Cold Hammer Forged, 1 in 7" twist, Mil-Spec M249 Machine Gun barrel steel with heavy M249 Chrome Lining, 5.56mm chamber Flash Suppressor: AAC M4-2000 51T Flash Hider/Suppressor Mount (pinned and welded) Optics: Trijicon ACOG TA33R-8 (3X Magnification w/ Red Chevron BDC) w/ LaRue LT-105 Mount Sights: Troy/Noveske M4-style Front and Rear BUIS Lower: Bushmaster XM15-E2S (RAW) Trigger: RRA NM Two Stage Grip: Magpul MOE Stock: Magpul CTR Mil-Spec Sling: BFG Vickers Combat Applications Sling Additions: ProMag Rail Covers, Magpul Battery Assist Device Use: Poodle management |
#34
|
||||
|
||||
![]() ![]() Upper: Rock River Arms Entry Tactical Barrel: R-4 16" Wilson Chrome Moly, 1:9 Twist 5.56mm Flash Suppressor: A2 Flash Hider Optics: EOTech Model 512.A65 w/ RRA Dominator Mount Sights: Standard Front; RRA Dominator Rear Lower: Rock River Arms LAR-15 Trigger: RRA Standard Grip: Standard Stock: RRA 6-Position Tactical Light: Surefire M500A WeaponLight Sling: 3-Point Tactical (Not Pictured) Use: Target practice, personal defense, and tactical carbine matches. Future Upgrades: - Magpul MOE Grip - Magpul CTR Stock - Magpul MS2 Sling w/ ASAP Mount
__________________
![]() ![]() "Gentlemen, you can't fight in here! This is the War Room!" You can trust me. I'm a Last edited by Cpl. Haas; 01-10-2010 at 9:05 AM.. |
#35
|
||||
|
||||
![]() ![]() Upper: Stag 2H Carbine Barrel: Stag 16" 1/9 5.56 Chrome Lined Gov't Profile with Miculek Compensator Lower: Sun Devil Stock: Magpul CTR Magazine: Magpul E-Mag Use: Killing Paper Zombies Trigger: RRA Single Stage Grip: MIAD with Solar Grip Wrap Optics: EOTech 552 w/ La Rue Po Boy Sights: Magpul MBUS Bipod: N/A Sling: Magpul MS2 (Not Shown) Light: N/A Paint: N/A Future Upgrades: Magpul BAD Lever
__________________
ΜΟΛΩΝ ΛΑΒΕ Last edited by Gio; 01-12-2010 at 3:23 PM.. |
#37
|
||||
|
||||
![]() ![]() Upper: DD M4 Bolt: DD s/a Barrel: DD CHF 1/7 twist, 16in M4 profile Trigger: RRA 2 stage Lower: Mega Gator - MULTI cal Grip: FDE Magpul MOE Stock: FDE Magpul CTR Magazine: P-Mag w/ Magpul Optics: EoTech 5.12 Sights: FDE Magpul Mbus rear Rail: Daniel Defense Omega X 12.0 FSP Sling: Vtac Rail covers: FDE Troy and FDE Magpul rail ladders VFG: Magpul AFG Last edited by djleisure; 01-18-2010 at 11:18 PM.. |
#38
|
||||
|
||||
![]() ![]() Upper:BCM Barrel:BCM Middy,1/7 twist Rail:LaRue 13.2 Charging handle:BCM Gunfighter Mod.4 Lower: CMMG MOD4SA Stock: LMT SOPMOD w/Ceracoated Flat Black LMT buffer tube/receiver extension Mag:10/30 PMAG M Trigger:Tuned USGI by Bill Springfield 4.5lbs Optics: Aimpoint T-1 w/LaRue mount Sights: TROY BUIS front and back Sling: Gear sector 2P Last edited by 818gtiguy; 01-21-2010 at 8:37 PM.. |
#39
|
||||
|
||||
![]()
Have made some changes to my DDM4 over the last few months. Played with different stocks and sights finding what I like and what I don't.
Very happy with the current iteration. Weighs in at 9.3lbs, which is a little heavier then I'd hoped for, but it carries it well and I think it's pretty balanced. ![]() ![]() DDM4 16" 1/7 Carbine Magpul ACS Stock Magpul MOE grip Magpul BAD Magpul AFG Knight's Armament 200~600 rear sight Emdom Gunslinger sling TLR-1 light Trijicon TR-24 on a LT-139 mount BCM #4 CH
__________________
- Jeff كافر - Infidel ![]() “Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right.” ― George Orwell, 1984 Last edited by gunsnrovers; 01-24-2010 at 9:19 AM.. |
#40
|
||||
|
||||
![]() ![]() Upper: CMMG A-3 with detachable carry handle and YHM tactical handrail Barrel: CMMG 14.5", 1 1/2" Phantom flash hider, 5.56, 1/7, M4 ramps, Chrome lined, 4150 steel, Lower: CMMG w/ Magpul hand grip Stock: Magpul 6 position collapsable Magazine: Lancer 30 round w/ 75 gr. match hollow points Use: Anybody who requires ventilation Flag: American 5' x 9.5' military burial w/ embroidered stars Last edited by CD MCKINNEY; 01-26-2010 at 3:03 PM.. |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
![]() |
![]() |