Lets see your 5.56/.223 SPR "Special Purpose Rifles"

[AM9000]

SAM-R inspired. NF 2.5-10x24 is coming next.

Bushmaster HBAR upper with MI rail
LMT lower
KAC 2 stage match grade trigger
Larue SPR 1.93 mount
Weaver 1-5x24 (NF 2.5-10x24 coming soon.)

[mcgibblet]

[SRG]

Coming soon: 18" heavy barrel, 4.5-14x Mark AR scope, trigger job

[echoarms]

Not to hijack a pic thread, but I'm seeing a lot of the VLTOR bipods. How do you guys like these? I think they look the best out of available, but how do they function compared to a Harris?

[FMJBT]

Originally Posted by thehouseproduct

Not to hijack a pic thread, but I'm seeing a lot of the VLTOR bipods. How do you guys like these? I think they look the best out of available, but how do they function compared to a Harris?

I ran a VLTOR side mounted bipod for a while, but have since switched to a Harris. The VLTOR was good for shooting from a bench, but lacked the tilt feature of the Harris so shooting from the ground was kind of a pain. Either find a perfectly level surface to shoot from, or dig out material from under one of the bipod legs until it levels out. The regular bottom mounted VLTOR bipods do have the ability to tilt and pan from side to side though, so they are probably a better option than the side mounted version.

[FMJBT]

Updated SPR version 3.0 (ish) Now with standard A-2 stock and Leatherwood CMR 1-4X24 scope. Previously equipped with a Magpul PRS stock and FM Optics 4-14X44 FFP Mil Dot. Overall weight has gone from 13.5 pounds to just 11 pounds now. I thought AR-15's were supposed to be lightweight?

[rhilberg]

Nice build 707FreedomFan. I like the color

[Capita159]

I thought I chime in.....

[gau17]

I'll play. Herei is my Mk12 MOD 0

[andrewj]

Very nice gau17, that's what this thread is all about.

What type of barrel you got on her?

[gau17]

1:8 Douglas barrel. She loves to eat 77 Gr SMK

[keson]

Originally Posted by gau17

I'll play. Herei is my Mk12 MOD 0

Looks great!

Here's mine:

[andrewj]

Originally Posted by gau17

1:8 Douglas barrel. She loves to eat 77 Gr SMK

The real deal. Do you know what type of finish they use?

[gau17]

Keson - Proper looking Mod 1
I tried using the UBR on mine and it just didn't look right.

Andrej - I don't know what the coating is. The upper was built by Precision Reflex. I just check their site and pricing has gone up since I purchased it over a year ago. I guess they are still popular.

[andrewj]

Originally Posted by gau17

Andrej - I don't know what the coating is. The upper was built by Precision Reflex. I just check their site and pricing has gone up since I purchased it over a year ago. I guess they are still popular.

I ask because I'm looking into a WOA barrel but I think the stainless barrel looks pretty awkaward... no offense Keson . Basically, I'm trying to find out what black coating everyone is using.


Pic thread:

Here's my poor man's rendition of a Mod 1(notice the DPMS barrel doesn't have the shoulder for the OPS INC collar in the right place).

[gau17]

you might want to look in the AR15.com site. They have a huge SPR thread. what twist were you looking to get 1:7?

[andrewj]

Originally Posted by gau17

you might want to look in the AR15.com site. They have a huge SPR thread. what twist were you looking to get 1:7?

Will do. You wouldn't happen to have a link, would ya?

For the type of shooting I do, it doesn't really matter. But for the sake of keeping the build relatively true a real Mk.12, I'll go the 1:7 route. If it weren't for that, I'd just go with the 1:8 BCM

[gau17]

sorry wrong link. What Keson said below.

[keson]

http://www.ar15.com/forums/topic.htm...294303&page=50

[Randee]

My in progress SPR Build

Mega Lower with:
-Magpul MOE
-Magpul BAD Lever
-Raddlock
-Magpul ACS Stock
-BCM 18 SPR MK 12 Upper
-Magpul AFG
-Aimpoint Replica

I know I still need real optics so saving I shall do! Haha, definitely some great builds on here! Hopefully I can get my SPR up to par with everyone else sooner rather than later!

[OutlawDon]

Originally Posted by Jel

Nothing crazy. Just my budget build.



Armalite 20" Heavy BBL 1/9 twist
Standard A2 Front Sight
BCM M4 Upper
S&W M&P Lower
DPMS LPK
Midwest Industries Rifle Length Free Float Handguard
Harris 6-9 Bipod
CAA Buttstock
Ergro Grip
Burris PEPR Scope Mount
Nikon 4-12x50mm Buckmaster

This is not a SPR with the 20" barrel.

[stphnman20]

Originally Posted by OutlawDon

This is not a SPR with the 20" barrel.

More like a SAM-R

[crob]

Originally Posted by Capita159

I thought I chime in.....

I like. That is one slick looking rig

[Cyc Wid It]

Hmmm not seeing many actual SPR's but, nice!

[straykiller]

alot of nice rifles in here i think im getting a little jealous hah

[Randee]

Thought I would bring this back to life!

My current setup on the SPR:

Took off the AFG and the Fakepoint. Subbed in a Primary Arms 4-16x44 in an American Defense mount.



Should be getting a bipod setup for it soon and later on down the line I will mimic OutlawDon's setup with a doctor sight cant mounted off the reciever!

[send it]

Here is mine!!!!!!!!!!!!!!!!!

[vmwerks]

I'll join in the fun, Spikes lower, 2 stage trigger, Noveske upper, Leupold AR scope, GG&G Bipod, etc etc

[mspiredm3]

Love em!

[Randee]

Bringing some life back again!



Im still debating the use of a comp on this thing tbh

[MKE]

Nice rifles I'm seeing here.

gau17: What kind of glass you running on that nice SPR? Great job!

This is my Mk 12 Mod 0 SPR rifle:

-- 18" Douglas stainless steel match barrel
-- OPS Inc muzzle break PRI front flip sight
-- A.R.M.S. 40 BUIS
-- A.R.M.S. 38 PEQ-2-3 swan sleeve
-- PRI GEN III free float forearm
-- PRI M84 Gas Buster charging handle
-- A.R.M.S. 22 30mm scope rings (QD)
-- Harris BRM bipod
-- LaRue Harris bipod adapter mount (QD)
-- Stag Model 6 lower with 2-stage trigger
-- Stag Arms A2 buttstock
-- Hogue grip

Missing are the Leupold Mark 4 3.5-10x40mm scope and A.R.M.S. #22 TRR mount.

[tsteffner]

anderson_mfg_AR15_5678hires.jpg
Anderson AM15-M416
www.atdmachineshop.com

[pacrimguru]

^ thanks for playing, but this isn't an SPR build. posted pic in wrong thread.

[Randee]

Im still trying to get a hang of video editting, but enjoy

much thanks goes to Jerry @ Valkryie Tactical for installing my brake BTW!

[vmwerks]

Originally Posted by Randee

Im still trying to get a hang of video editting AND POSTING, but enjoy

much thanks goes to Jerry @ Valkryie Tactical for installing my brake BTW!

Fixed your post.. :P

[Randee]

LOL, I cant get it to work, apparently its not as simple of html tags as I thought

[vmwerks]

Originally Posted by Randee

LOL, I cant get it to work, apparently its not as simple of html tags as I thought

Use the youtube button and insert Apd8UvZDkKU into it, like so



EDIT: Nice build BTW

[pdugan6]

Spikes tactical ar15. It has the following components:

LOWER:
>spikes billet lower receiver
>spikes enhanced lower parts kit and trigger assembly
> ambi bolt release
>KNS anti walk trigger pins
>hogue grip
>spikes aluminum buffer tube assembly
>Magpul ACS stock
> 4 10 round c products mags
UPPER:
>spikes billet upper receiver
>DPMS Titanium nitrate coated bolt carrier assembly
>BCM gunfighter charging handle
>Viking Tactics free float rifle length forend
>DPMS Barrel AR-15 Mini SASS 5.56x45mm NATO .920" Muzzle Diameter 1 in 8" Twist 18" Fluted Stainless Steel Black Teflon Pre-Ban
>PRI low profile gas block
>PRI quiet control break muzzle break
>b square scope mount
>Redfield 4-12 thin crosshair scope


https://picasaweb.google.com/pdugan6...AE&feat=email#

[dj_dub]

My SPR build, not done yet...waiting on my B.A.D. Ambi-Safety, KAC Front Sight, JP Compensator and other little things.

Upper: BCM Mk12 Mod 2X-Bravo w/LaRue 13.2" Rail, 18" Stainless Barrel, 1/8 Twist.

Lower: Noveske N4

[rareair]

POF-USA P415-18-11T-223
Ergo grip
AAC Brakeout compensator
Nikon M223 2-8x32/BDC scope
MagPul UBR stock
RRA 2-stage trigger