Let's see some AK-47 (post your pic) - Page 6

fourZero · #**201** 08-10-2009, 11:44 AM

My AK-101 with Samson quad rail and LaRue 2-point sling. Samson replaced Leapers (UTG) rail, no comparison for quality.

WeekendWarrior · #**202** 08-10-2009, 6:57 PM

WASR-10, still trying to figure out how to drop the red dot sight down. I've posted this before, but want to add to the collection of awesome AKs in this thread!

**69Mach1** · #**203** 08-12-2009, 8:26 PM

The Kalashnikov's Israeli cousin.

SCMA-1 · #**204** 08-13-2009, 5:41 AM

Quote:

Originally Posted by 69Mach1

The Kalashnikov's Israeli cousin.

Galils and Valmets are awesome refined Kalashnikovs!

I never picked up any Galils back in the day because they were always more expensive than everything else; I regret it now.

I did pick up a bunch of Valmets, though; they were cheaper than anything else.

SCMA-1

**69Mach1** · #**205** 08-13-2009, 10:48 AM

Quote:

Originally Posted by SCMA-1

Galils and Valmets are awesome refined Kalashnikovs!

I never picked up any Galils back in the day because they were always more expensive than everything else; I regret it now.

I did pick up a bunch of Valmets, though; they were cheaper than anything else.

SCMA-1

Oh, how I wish there was an off list Valmet.

Social Casualty · #**206** 08-13-2009, 10:58 AM

My first ever AK style rifle, Polish Underfold by Lancaster

Frijolito1988 · #**207** 08-13-2009, 11:02 AM

Quote:

Originally Posted by fourZero

My AK-101 with Samson quad rail and LaRue 2-point sling. Samson replaced Leapers (UTG) rail, no comparison for quality.

AK101 ???

That apears to be a 7.62 magazine

Frijolito1988 · #**208** 08-13-2009, 11:03 AM

Quote:

Originally Posted by Social Casualty

My first ever AK style rifle, Polish Underfold by Lancaster

Very beautiful Polish, im looking to get on in the near future.

SCMA-1 · #**209** 08-13-2009, 11:04 AM

Quote:

Originally Posted by 69Mach1

Oh, how I wish there was an off list Valmet.

Valmet M-82 Bullpup is not on the list. I have one but sent it out of state before the last registration deadline; didn't want to register anymore guns.

I'm thinking of maybe making a bullet button for it and bringing it back in.

SCMA-1

tenbrook · #**210** 08-13-2009, 11:59 AM

Quote:

Originally Posted by SCMA-1

Valmet M-82 Bullpup is not on the list. I have one but sent it out of state before the last registration deadline; didn't want to register anymore guns.

I'm thinking of maybe making a bullet button for it and bringing it back in.

SCMA-1

Kinda fugly.....I like it!

SCMA-1 · #**211** 08-13-2009, 12:12 PM

Quote:

Originally Posted by tenbrook

Kinda fugly.....I like it!

yeah............they are ugly

....

.............in a vicious sort of way!

Rick530 · #**212** 08-13-2009, 12:18 PM

Lancaster

Chunky_lover · #**213** 08-13-2009, 1:34 PM

Quote:

Originally Posted by Rick530

Lancaster

So are you going to throw a MM grip on that thing, wonder if its ever been tried, that way no mag lock?

Rick530 · #**214** 08-13-2009, 1:41 PM

Nah I dont really mind the mag lock.

Quote:

Originally Posted by Chunky_lover

So are you going to throw a MM grip on that thing, wonder if its ever been tried, that way no mag lock?

socomIInato · #**215** 08-13-2009, 1:46 PM

Quote:

Originally Posted by SCMA-1

Valmet M-82 Bullpup is not on the list. I have one but sent it out of state before the last registration deadline; didn't want to register anymore guns.

I'm thinking of maybe making a bullet button for it and bringing it back in.

SCMA-1

took a look at one back in the day at good olde B&B, price $400.00. awkward too handle and butt ugly too. I not to fond of bullpups, just don`t like my face being right next too the ejector port. that being said I was considering buying one of those AUGS they had on the wall. that the one I regret not buying.

Q · #**216** 08-13-2009, 2:24 PM

My favorites and a little about them.
Arsenal AR SF 762x39 parts kit on a firing lane receiver, built by the firing lane.

Norinco BWK92, rebarreled with a preban polytech barrel by Red Jacket.

DirtRacer151 · #**217** 08-13-2009, 2:32 PM

Quote:

Originally Posted by Chunky_lover

So are you going to throw a MM grip on that thing, wonder if its ever been tried, that way no mag lock?

i thought that wouldn't matter since the mag is outside the grip anyway? I didn't think you could build a featureless pistol

SCMA-1 · #**218** 08-13-2009, 5:21 PM

Quote:

Originally Posted by socomIInato

took a look at one back in the day at good olde B&B, price $400.00. awkward too handle and butt ugly too. I not to fond of bullpups, just don`t like my face being right next too the ejector port. that being said I was considering buying one of those AUGS they had on the wall. that the one I regret not buying.

Yeah, that's where I got mine; they were blowing them out for $299 and half the price of the AUG so I picked one up.

Nice shooter and typical Valmet quality.

**69Mach1** · #**219** 08-13-2009, 7:36 PM

Quote:

Originally Posted by SCMA-1

Valmet M-82 Bullpup is not on the list. I have one but sent it out of state before the last registration deadline; didn't want to register anymore guns.

I'm thinking of maybe making a bullet button for it and bringing it back in.

SCMA-1

Wow, I did not know that exsisted, thanks. Can't say I'm really hooked though.

Looks like it's a little short of OAL, and that by far is the weirdest sighting system I've ever seen.

**69Mach1** · #**220** 08-13-2009, 7:39 PM

Quote:

Originally Posted by Chunky_lover

So are you going to throw a MM grip on that thing, wonder if its ever been tried, that way no mag lock?

Quote:

Originally Posted by Rick530

Nah I dont really mind the mag lock.

Until the CA AW ban is eliminated, a pistol with the magzine well outside of the grip is an AW feature. An AK pistol MUST have a mag lock (with a 10 rounder) at all times. There is no such thing as a featurless AK pistol.

Quote:

Originally Posted by DirtRacer151

i thought that wouldn't matter since the mag is outside the grip anyway? I didn't think you could build a featureless pistol

Correct, you cannot.

**69Mach1** · #**221** 08-13-2009, 11:45 PM

**69Mach1** · #**222** 08-14-2009, 11:10 PM

Am I the only one posting here? Let's see them.

sonicbuff · #**223** 08-15-2009, 12:20 AM

Quote:

Originally Posted by 69Mach1

Am I the only one posting here? Let's see them.

A couple of them:

luchador768 · #**224** 08-15-2009, 12:53 AM

Quote:

Originally Posted by 69Mach1

I gotta tell ya 69mach I have a little bit of a man crush on you! You have by far the greatest collection on calguns.

tenbrook · #**225** 08-15-2009, 6:01 AM

65cobra · #**226** 08-15-2009, 11:47 AM

my Yugo M70 AK twins, I rewelded both, the fixed stock rearend was fabricated by me, I used a tiny chunk of an akm rear trunion to accept the recoil spring assembly.

God Bless The Mauser · #**227** 08-15-2009, 11:56 AM

Quote:

Originally Posted by 65cobra

my Yugo M70 AK twins, I rewelded both, the fixed stock rearend was fabricated by me, I used a tiny chunk of an akm rear trunion to accept the recoil spring assembly.

Welcome to the reweld club

Yugo M64's are just the best

marxdspot · #**228** 08-15-2009, 12:19 PM

Quote:

Originally Posted by 65cobra

my Yugo M70 AK twins, I rewelded both, the fixed stock rearend was fabricated by me, I used a tiny chunk of an akm rear trunion to accept the recoil spring assembly.

Now that is mad skills! Awesome builds...very very NICE!!!

skscj · #**229** 08-15-2009, 2:19 PM

Quote:

Originally Posted by 69Mach1

One more.
Bulgarian AK-74

69 Mach1. Is that a Krink stock from RPB Industries?

marxdspot · #**230** 08-15-2009, 7:20 PM

Quote:

Originally Posted by skscj

69 Mach1. Is that a Krink stock from RPB Industries?

Judging by the pics, it the actual Bulgy '74 folding stock evident by the push button mech utilized by the receiver. Nice build 69mach1!!!

GettinReady · #**231** 08-15-2009, 7:52 PM

Here's a Bulgarian Arsenal milled receiver.....originally bought here in Cali but I shipped to Vegas cuz I did not want to register it -

**69Mach1** · #**232** 08-15-2009, 11:04 PM

Quote:

Originally Posted by luchador768

I gotta tell ya 69mach I have a little bit of a man crush on you! You have by far the greatest collection on calguns.

Quote:

Originally Posted by marxdspot

Judging by the pics, it the actual Bulgy '74 folding stock evident by the push button mech utilized by the receiver. Nice build 69mach1!!!

Thanks.

Quote:

Originally Posted by skscj

69 Mach1. Is that a Krink stock from RPB Industries?

Nope. That is a genuine AK 74 side folding stock, but it's locked in the open position.

RPB sells the fakes, but they are not the maker. It's actually an FSE "Krinkov" fixed stock. There were 3 or 4 versions. There was a version for the standard stamped AKM and the thicker Chinese AK. They were also made in both aluminum and plastic (zytel?). The more desirable and harder to find version is the aluminum one. Here is an actual FSE aluminum stock on my Romanian SAR1 "Khyber Pass" clone.

50CalAL · #**233** 08-16-2009, 1:05 AM

Here's my WASR-10:

nevster · #**234** 08-16-2009, 1:44 PM

Wow, these are some great looking rifles. I'm just finishing putting mine together. I'll be taking it out to Frontsight in Pahrump, Nevada for a 4 day rifle course to get things dialed in. I have a once in my lifetime opportunity to sponsor a 40 person rifle class at Frontsight. See my post in Commercial Sales and Good Deals. http://www.calguns.net/calgunforum/s...d.php?t=205793

Hope to get some more AK-47 shooters with me so we can show others what 7.62 x 39mm can do.

Of course if your friends and family shoot the AR-15 platform their welcome too.

nevster

Q · #**235** 08-16-2009, 4:02 PM

Preview of my milled projects.
Hoping to get the milled double underfolder replica done this year.

milled double underfolder.

m22

tenbrook · #**236** 08-19-2009, 8:41 AM

Wanted to add another picture of some cool "trench art". I just picked up these Yugo Handguards.

Any idea what kind of canon that might be?

Nix78 · #**237** 08-19-2009, 9:24 AM

So on A Saiga converted can you have A folding stock if it has no pistol grip

fourZero · #**238** 08-19-2009, 5:26 PM

Quote:

Originally Posted by Frijolito1988

AK101 ???

That apears to be a 7.62 magazine

It's a Henderson Defense AK-101, which is just a NDS-3 receiver and Yugo parts kit.

stix213 · #**239** 08-19-2009, 5:47 PM

Quote:

Originally Posted by GettinReady

Here's a Bulgarian Arsenal milled receiver.....originally bought here in Cali but I shipped to Vegas cuz I did not want to register it -

Didn't want to register it??? But you'd be allowed to use pre-ban high caps legally on that thing with detachable mags and everything! But I understand not wanting the Cali government having you on another list.

**69Mach1** · #**240** 08-19-2009, 8:50 PM

Quote:

Originally Posted by Nix78

So on A Saiga converted can you have A folding stock if it has no pistol grip

Nope.
http://i52.photobucket.com/albums/g1...8/DSC04667.jpg

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode