Gunsmithing

AFAB Firearms · #1 07-25-2022, 6:51 PM

Here at AFAB Firearms we offer gunsmith services at competitive prices. We pride ourselves with our craftsmanship and untouchable quilt, all our gunsmithing is done in house! Please allow for a 2-4 week lead time. Some guns may take longer due to back orders for parts and materials For any questions or to get started, call us at (714) 624-4730

*All pricing based on average jobs and may not be actual. Prices are subject to change

Contact us for a service quote, we are constantly adding standard* pricing.

Service

Labor – per man hour $80
Labor – per machine hour $100
Re-assembly of firearms (labor only) $75
Diagnosing $45
Written appraisals – (per gun) $35
Field strip and clean $29
Deep Clean Service $80
Deep Clean Service – Double Barrel Shotguns $125
Law Enforcement Inspection $35
Reliability work .75 Hr labor $100
Cosmoline removal 2 Hr labor (Rifle) $200
Cosmoline removal 1 Hr labor (pistol) $100

Barrel

Check Headspace $20
Chamber cast $50
Remove stuck fired case*** $50
Remove live round*** $100
Remove bore obstruction*** $50
Install rimfire liner (+liner cost) Requires refinish, additional cost $225
Install Centerfire liner (+liner cost) Requires refinish, additional cost $325
Cut and crown barrel*** $100
Fit and Chamber barrel to action (+ blank) Requires refinish, additional cost $275
Recontour barrel, Requires refinish, additional cost*** $220
Contour (+ blank) Requires refinish, additional cost*** $265
Install pre-threaded / short chambered barrel $175
Lap bolt lugs $65
Install Sako or m-16 extractor (Includes parts) $180
Weld on new bolt handle (+ desired parts)*** $150
Bolt – Install thread-on bolt handle $135
Blueprint Bolt Action Receiver $275
Trigger job – Factory* $75
Install Aftermarket triggers with setting* $75
Install muzzle brake or fake suppressor on pre-threaded barrel $35
Thread muzzle for brake or fake suppressor** $150
Thread muzzle for brake or suppressor with matching cap** $160
Pin-Weld (+ desired brake or flash hider) $85
Barrel Threading- AK, BAR, Lever gun $250

Cerakote

Scope (Solid)***** $200
Scope (Pattern)***** $250
Scope Base / Iron Sights (Each) $25
Scope Base / Iron Sights (1 piece Cantilever) $50
Service $00
Scope Rings (Solid) $25
Scope Rings (Pattern) $60
Magazine (Solid) $25
Magazine (Pattern) $50
Small Parts (Solid) $25
Custom or specialized work $
Semi-Auto Rifle – 1 Color $350
Semi-Auto Rifle – 2 Color $415
Semi-Auto Rifle – Intricate/Camouflage pattern (Freehand)*** $500
Semi-Auto Rifle – Intricate/Camouflage pattern (Stencil)*** $550
Stock / Forend / Grip AR/AK Set- 1 Color $200
Stock / Forend / Grip AR/AK Set – 2 Color $265
Stock / Forend / Grip AR/AK Set – Intricate/Camouflage pattern (Freehand)*** $300
Stock / Forend / Grip AR/AK Set – Intricate/Camouflage pattern (Stencil)*** $350
Tumbler 20 oz. / 30 oz. (Solid) with font $45
Tumbler 20 oz. / oz. (Pattern) with font $66
Tumbler Distressed $15
Tumbler Stencil Work*** $35
Pistol Slide only – 1 color $120
Pistol Slide only – 2 color $135
Pistol Slide only – Intricate/Camouflage pattern (Freehand) $175
Pistol Slide only – Intricate/Camouflage pattern (Stencil) $200
Handgun frame – 1 Color $185
Handgun frame – 2 Color $200
Handgun – Intricate pattern $250
Specialized finish – Metallic , pearl, iridescent over Cerakote $50 additional
Clear (Gloss or Matte) over existing Cerakote or hydro dipping work $100
Micro slick bolt or carrier group (Black) $50
Fake Suppressor (1- color) $65
Fake Suppressor (Multi-color) $85
Distressed (Handgun) $30
Distressed (Long Gun) $60
Standard Long gun – 1 Color (All metal parts – No stock) $200
Standard Long gun – 2 Color (All metal parts – No stock) $265
Standard Long gun – Intricate/Camouflage pattern (Freehand) (All metal parts – No stock)*** $300
Standard Long gun – Intricate/Camouflage pattern (Stencil) (All metal parts – No stock)*** $350
Standard Long gun – 1 Color (Stock only) $100
Standard Long gun – 2 Color (Stock only) $150
Standard Long gun – Intricate/Camouflage pattern (Freehand) (Stock only)*** $175
Standard Long gun – Intricate/Camouflage pattern (Stencil) (Stock only)*** $200

Handgun

Trigger Job – Single Action Revolver $95
Trigger Job – Double Action Revolver $145
Port Barrel $175
Chamfer revolver barrel $45
Chamfer cylinder barrel $60
Face receiver frame and re-install barrel (w/o refinish) $175
Re-barrel revolver w/factory barrel (labor only) $100
Re-barrel w/ custom barrel (Estimate available per job) $200
Straighten crane on revolver $50
Install ball detent- crane lock $80
Remove or modify hammer spur $50
Modify square butt to round butt frame $100
Semi-auto trigger work – Single Action $90
Semi-auto trigger work – Double Action $150
Aftermarket Trigger Install*** $45
Fit new barrel bushing on 1911 (Labor) $70
Fit new barrel on 1911 – Non Ramped Barrel $100
Fit new barrel on 1911 – Ramped Barrel $160
Fit new barrel on 1911 – Bull or Bushing less barrel $140
Polish feed ramp (Estimate available per job) $50
Open and modify ejection port (Requires refinish, additional cost) $55
Stipple Frame (Requires refinish, additional cost) $150
Fit new trigger and bow (Labor only) $50
Fit custom hammer to pistol (labor only) $78
Fit new safety (labor only) $75
Fit beavertail safety (labor only) – drop in style*** $35
Fit beavertail safety (labor only) – Frame modification and refinish required $105
Custom slide modification (Estimate available per job depending on work) $119
De-horn and break edges for carry (Requires refinish, additional cost) $75
Install Compensator (Labor only)*** $100
Fit custom slide (Labor only)*** $175
Rear dovetail non-standard (Starting at) $75
Polymer frame stippling standard $100
Colored frames $125
Undercut $40
Double undercut $65
Grip reduction $150
Accelerator cuts $40
Memory pads (Front Fram Stippling $35
Forward cocking serrations (starting at) $109
Laser Engraving
Metal / Plastic – NFA Engraving Per line (2 lines / 25 Characters) $ 100
Customer supplied logo (Vector Format) – Per Hour $ $125
Custom text ( 1 line / 25 Characters) $ 100
Stippling or texture *** (Estimate available per job at hourly rate) $185-$275
Metal texture $135
Metal
Metal Finish – Bead Blast (Stainless steel) $100
Bluing – Reblue (Matte) $150
Bluing – Reblue (Standard Finish) $185
Bluing – Polished Blue $225
Bluing – Belgian Bluing*** $250
Bluing – Slow Rust Bluing*** $600
Restoration – (Estimate available per job at hourly rate) $110
Firearms Disassembly and Reassembly*** $65
Bluing – Parkerizing – Handgun*** $150
Bluing – Parkerizing – Longun*** $200
Jeweling – Bolt $135
Jeweling – Other Parts (Per hr.) $135
Polish (hourly) $80

Muzzle Brakes

Style #1 $150
Style #2 $175
Style #3 $220

Plating

Custom work – Services priced per request $110

SAR Work

Standard Maintenance rebuild – (Includes gas rings and springs) $140
Install trigger, test fit and function (Labor only) $45
Install forend (labor only) $55
Assemble complete upper*** $55
Tune Gas Port $65
Install and tune (Labor only) $40
Install new buttstock and buffer tube (Labor only) $25
Specialty Semi Automatic Rifle Work – Per Hour (Estimate available per job) $110

Shotgun

Change front of mid sight bead* $25
Lengthen forcing cone – Non-plated barrel (Each) $80
Lengthen forcing cone – Plated barrel (Each) $110
Lengthen chambers (Non-plated barrel – each) $85
Polish chamber $55
Raising dent in barrel striking (Requires refinish, additional cost)*** $85
Straighten or adjust barrel for point of impact*** $65
Re-solder rib (Requires refinish, additional cost)*** $85
Open or modify chokes (Non-plated bore) $65
Install screw in chokes (Non-plated bore – labor only) $85
Port Barrel (Each) $145
Re-fit hinge pin and lug*** $225
Shotgun loading gate modification (w/o refinish) $150

Sight

Sight Work – Sight In (Plus Ammo) $75
Sight Work – Bore Sight $20
Sight Work – Dovetail sight adjust $41
Sight Work – Drill and Tap (Per Hole) $25
Sight Work – Cut Dovetail (Per Cut) $75
Install front Sight – Screw on w/ existing hole $25
Install front Sight – Screw on w/ drill & Tap $70
Install front sight – soldered on $90
Barrel Band Install (+desired parts) $90
Cut slide for standard sights $85
Bury rear sight and cut dovetail $150
Install stake on sight (1911) $45
Install Night Sights $45
Install sights w/o machining*** $50
Install center bead / includes drill and tap $45
Pattern Shotgun (+desired ammunition selection)*** $100
Mount and Bore Sight $35
Lap Rings $30
Cut and lap rings $75
Open receiver holes to 8×40 $80
Re-cut base to fit receiver (Estimate available per job)*** $120

Slide Alterations
(Sight not included)

RMR / Red Dot Slide cuts $150
RMR / Red Dot Slide cuts Sig Sauer, M&P, CZ, H&K $185
RMR/ Red Dot Slide cut radius front and rear to match $225

Stockwork

Refinish – Standard (Hand Rubbed Oil) $190
Refinish – Filled (Hand Rubbed Oil)*** $240
Refinish – Spray on lacquer or Urethane*** $135
Re-cut Checkering*** $200
Glass bed action – Bolt Action (Action Only) $90
Glass bed action – Bolt Action (Full Length) $140
Glass bed action – w/pillars $175
Glass bed action – Aluminum bedding block $125
Glass bed action – M1 and M1A rifles $175
Fit wood or Synthetic inletted stock in addition to bedding costs $55
Install cross bolts (labor only) $95
Install recoil pad (+cost of desired style of recoil pad) $70
Install adjustable butt plate (+desired parts) $95
Sling swivel labor (Standard studs) – Parts additional cost $35
Sling swivels labor (Flush Mount) – Parts additional cost $75
Sling Swivels labor (Island Style) – Parts additional cost*** $125
Recoil reducer – No drill $25
Recoil reducer – drill stock and install – + cost of reducer $65
Recoil reducer – Graco or similar style $175
Adjustable comb – Install only – Parts additional cost*** $200
Repair cracked / Broken stock (Base price)*** $80
Install forend tip (Labor only)*** $80
Reshaping stock (Estimate available per job) $80

Test Fire

Standard Ammo $12.50
Exotic Ammo* (Some cartridges will be quoted per round) $16

Action

Action Job Bolt Gun 1 Hr labor $125
Action Job Lever Gun 2 Hr labor $175
Action Job Revolver Gun 1.5 Hr labor $150
Trigger job Lever gun 1.5 hours $125

POR = Pricing On Request | *FSP not available in all states