Lets see your .223 California Legal Self Loading Rifle!

[Exdc]

Finally converted my left-side charging 6.8 into a 5.56 (top) that I can effectively use for unsupported shooting activities. Took my eotech off my partner's AR (bottom) and put a Sparc II on for her.


Also took the wall mount (3D printed) spot.

I opted for a muzzle break this go-round.


Sent from my iPhone using Tapatalk

[Scottn]

Sent from my iPhone using Tapatalk

[spence52490]

[jsigone]

Frankenbuild with
LMT lower/upper set, ambi charge handle, buffer tube, H1 buffer
Larue 14.5 barrel and flat 2s trigger,
KAC ambi mag release
BCM stock and KAG
Cross Machine 15" rail
Rail scales MLOK covers
SLR rifleworks TiN BCG and Linear comp

Optics:
Trijicon Accupower 1-8 in Larue 34mm mount
Trijicon RMR 6moa offset on arisaka mount

[comifornia:(]

[Hiatt1991]

FC6206CB-F2C7-43B6-B12A-14B7DB110C98.jpg

Here’s my M16A4 clone with a fixed surplus Okay Industries mag limited to 10 rounds. Tried to make it look as authentic as possible.

[crufflers]

Nice rifles.

[CheapBloke]

Dissy AR. (Non-Mocked.)

Rifle-Length Gas.

RRA LE Entry Stock Carbine Buffer (was extremely difficult to find.)

A2 Upper Receiver.

Sent from my SM-N960U using Tapatalk

[tacticalcity]

Originally Posted by CheapBloke

Dissy AR. (Non-Mocked.)

Rifle-Length Gas.

RRA LE Entry Stock Carbine Buffer (was extremely difficult to find.)

A2 Upper Receiver.

Sent from my SM-N960U using Tapatalk

Nice. Calvary Arms makes an A1 length stock similar to that.

Who makes that grip fin for the MIAD grip? That is pretty slick.

[CheapBloke]

Originally Posted by tacticalcity

Nice. Calvary Arms makes an A1 length stock similar to that.

Who makes that grip fin for the MIAD grip? That is pretty slick.

A1 is a lil bit longer.

Miad 1.1 and fin attachment off ebay for 15.

This was the seller. No longer listed, he had multiples, maybe he has some left.

https://ebay.com/usr/yhp87

Sent from my SM-N960U using Tapatalk

[crufflers]

This guy is selling a modded variant and they are fairly cheap, $19 for two or varies by color...

https://zotarms.com/index.php/produc...-miad-1-1-fde/

three black for $40

https://zotarms.com/index.php/store/

MIAD 1.1 not included

The original was pretty ground-breaking IMHO. Didn't really hold up that well, but you could make it last by using stronger spring or replacing it regularly or 3M tape it or epoxy, etc... shape and MIAD fit was what set it apart. I still have one in fairly good shape and removed some others for one-piece fin grip solutions. If I reinstall some or print some I will probably use epoxy for the fin to MIAD eliminating the nylon spring that wears or gets lost.

[Daewoo223]

My Dr200 with Magpul slider w/StormWerks adapter, FAL handguard and Compmag

[RAMCLAP]

An old DDM4V3 Recently updated to a 13.5 MFR handguard.

[RAMCLAP]

Originally Posted by tacticalcity

Made some changes to my Noveske Recon Hunter 5.56mm Rifle.

This is a sweet rifle.

[tacticalcity]

Thank you for the compliment RAMCLAP.

I just added a Trijicon RMR RM06 Red Dot sight in an American Defense Offset Mount. It's a range queen do to all the compliance parts on her. But I figured I would go all out anyway. Hopefully this will be the last change for a while.

[Antwonverse626]

My bebs


Sent from my iPhone using Tapatalk