|
California handguns Discuss your favorite California handgun technical and related questions here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Good Cerakote in Northern Cali
Looking for someone who can do a battle worn OD green Cerakote in Northern Cali. Anyone have some references? I don't mind paying a little extra to make sure the job is done right; I'm not looking for a cheap job. Thanks!
|
#3
|
|||
|
|||
I recommend SAGISI Customs, he did an amazing job on my SP-01 when he was based near SJC airport. I think he moved to Milpitas recently.
https://www.sagisicustoms.com http://www.calguns.net/calgunforum/s....php?t=1306471 |
#4
|
||||
|
||||
Not in nor cal- but have you looked at Blown Deadline photo gallery?
They do great work. Even if you don’t use them, it could be helpful to have some color prints of examples.
__________________
Rule 1- ALL GUNS ARE ALWAYS LOADED Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs) Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT (thanks to Jeff Cooper) |
#6
|
||||
|
||||
__________________
Rule 1- ALL GUNS ARE ALWAYS LOADED Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs) Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT (thanks to Jeff Cooper) |
#12
|
||||
|
||||
Damn, I’ve been wanting to get an upper and lower and handguard cerakoted in M81 woodland.
But I’m in SoCal. Not sure if it’s worth going that far north - but those pics make me think about it..
__________________
- Kyle Rittenhouse did nothing wrong - |
#15
|
||||
|
||||
Quote:
He showed me around the shop. They do a lot of stuff for other manufactures or suppliers of parts. My little single coating is just a drop in the ocean of what he's doing. You'll get it done right through him.
__________________
Before there was Polymer there was Accuracy. |
#17
|
||||
|
||||
Probably around $200 if you give him an entirely disassembled pistol. Frame and Slide only.
My slide is going to be just over $100 and I handed off a brand new steel 1911 slide that has never had a finish on it. But that includes some prep on his part (mainly masking off slide rails and such). He's really only taking single colors now and I would suggest picking a common color he's probably going to do a large batch for. That way at least yours can be included in the spray.
__________________
Before there was Polymer there was Accuracy. |
Thread Tools | |
Display Modes | |
|
|