Buckmark Porn

[Beegee]

Nothing special, dang rusty22, those are some bad ***** pistols!

Sent from my SM-G930T using Tapatalk

[rusty22]

this needs a major bump...

here's a pic of an allchin mount that i drilled and tapped for both the OPTIMA, FIREPOINT, JPOINT, and BURRIS FF3, as well...



here's a pic of the allchin w/ a cmore sight as inteneded to be used...



here's a pic of the allchin w/ a TASCO OPTIMA/JPOINT mounted...



here's a pic of the allchin w/ a BURRIS FF3 mounted...



no rocket science here, you just need to work w/ someone who can accurately locate/drill holes and tap them the correct thread pitch for the mounting screws.
hope this helps...

-rusty22

p.s. thanks to all for the kind words regarding my "tinkering". much appreciated! now, post some pics!!!

[golfish]

I had a chance to shoot my new Buckmark URX yesterday. I can see why you guys love these guns. I fed it 3 different kinds of bulk pack without a problem. The trigger is awesome, the grip and the weight are perfect.
Thanks to all of you for leading me down this path.

[RollingCode3]

[steelholder]

Originally Posted by RollingCode3

Sweeeet, which do you prefer?

[RollingCode3]

Originally Posted by steelholder

Sweeeet, which do you prefer?

Ruger Mark IV. Much easier to clean and a lot sexier

[rusty22]

Originally Posted by RollingCode3

Ruger Mark IV. Much easier to clean and a lot sexier

really? and in a buckmark thread? blasphemy!!!

sorry but I have to represent the "brotherhood of buckmark"...

[steelholder]

Originally Posted by RollingCode3

Ruger Mark IV. Much easier to clean and a lot sexier

Any difference in accuracy?

[NightForce]

Originally Posted by gityerkneedahn

This is my practical urx bought 2017. Alterations at the time of the photo:

4” tacsol bbl with 2211 comp pinned and welded and front sight removed.

Halo charging ring

Tacsol rail

Holosun solar circle/dot rds

Wish List:

Tandemkross trigger

Modded safety that doesn’t interfere with my grip (not sure this even exists)

I did try the Heggis Flip, didn’t work for me just caused all manner of failures.


Sent from my iPhone using Tapatalk

That sexy trigger, very alluring my friend.

[johnson6048]

I’ll be picking up my Buckmark Plus UDX Rosewood variant this weekend. Can’t wait. Really wanted a Ruger MKIV but they were near impossible to find as a CA resident. Anyways, I’m very excited and from all my research they appear to be evenly matched in terms of accuracy. Good looking pictures posted! I will post some once I get mine and then install the new parts.

Quick question: With the intention of competing in Conventional Pistol matches (25yd & 50yd) I’m interested in more info about barrels both related to accuracy and balance. Anyone of you Buckmark fans know if there is a thread already? I searched but didn’t really see one specifically. Don’t want to side track this thread so I’ll stop there.

[newbie1234]

Very simple, Countour and Lite (long barrel), just a thump rest grip on Lite everything else are stock.

[newbutold]

I'd settle for a Buckmark

[rusty22]

Originally Posted by newbutold

I'd settle for a Buckmark

whether shooting steel plates, bullseye targets, or any furry creature of choice, you would NOT be settling with a buckmark...

take notes, there will be a pop quiz in the near future!

disclaimer: NOT MY ARTICLE, just re-posting so someone's hard work can be appreciated by those who need some informing...



BMSTORY1 by rusty_22@sbcglobal.net, on Flickr

BMSTORY2 by rusty_22@sbcglobal.net, on Flickr

BMSTORY3 by rusty_22@sbcglobal.net, on Flickr

BMSTORY4 by rusty_22@sbcglobal.net, on Flickr

hope you guys enjoyed the article! i know i did. enjoyed it so much that I made sure to forward it to all my shooting buddies who owned RUGERS!!!:

[johnson6048]

Originally Posted by johnson6048

I’ll be picking up my Buckmark Plus UDX Rosewood variant this weekend. Can’t wait. Really wanted a Ruger MKIV but they were near impossible to find as a CA resident. Anyways, I’m very excited and from all my research they appear to be evenly matched in terms of accuracy. Good looking pictures posted! I will post some once I get mine and then install the new parts.

Quick question: With the intention of competing in Conventional Pistol matches (25yd & 50yd) I’m interested in more info about barrels both related to accuracy and balance. Anyone of you Buckmark fans know if there is a thread already? I searched but didn’t really see one specifically. Don’t want to side track this thread so I’ll stop there.

So I bought the Buckmark Plus UDX Rosewood variant with slab side barrel. After holding several different variations including those with a what looked like bull barrels, I noticed they were actually lighter than the slab side. I prefer the heavier option for the sake of my Conventional Pistol match bulls-eye competition.

Installed a Tactical Solutions rail and a Vortex Venom red dot sight. Used Aguila 22LR Match Grade ammo and did extremely well in competition. I was shooting the other day with my wife and we tested accuracy at a 10yd target. I benched the pistol and was able to put seven rounds (of 8 fired; I jerked one) in an area no larger than a nickel (closer to dime size). I'm super happy with Buckmark and would definitely recommend it. It's hard for me to imagine that this thing could get any more accurate.



-Semper Fi-

[billt]

Nice gun. I have the same.

[rusty22]

here's my buddy's buckmark. totally his vision, was more than happy to help him make it a reality...

[M1NM]

Wood & Blue for the win!

[steelholder]

All these sweet buckmark are off roster, are you guys getting these ppt?

[broadside]

Originally Posted by steelholder

All these sweet buckmark are off roster, are you guys getting these ppt?

Once you get the on-roster pistol, its all aftermarket parts after that.

[rusty22]

All these sweet buckmark are off roster, are you guys getting these ppt?
08-08-2018 10:30 PM

Once you get the on-roster pistol, its all aftermarket parts after that.

think of a buckmark as a "blank canvas"...

here's a link to "CA-friendly" models...

http://www.browning.com/products/fir...compliant.html



















the nice thing about buckmarks is that once you have the receiver/frame with the grip type of choice (standard/UFX, URX, or UDX), you can order most other parts (barrels, slides, fire control, etc...) from either browning parts dept. or aftermarket enabler/vendor! you can build a 4" shorty/micro or go long w/ a 14" unlimited silhouette bull barrel and/or go back and forth if that's what floats your boat!

[steelholder]

Originally Posted by rusty22

think of a buckmark as a "blank canvas"...

here's a link to "CA-friendly" models...

http://www.browning.com/products/fir...compliant.html



















the nice thing about buckmarks is that once you have the receiver/frame with the grip type of choice (standard/UFX, URX, or UDX), you can order most other parts (barrels, slides, fire control, etc...) from either browning parts dept. or aftermarket enabler/vendor! you can build a 4" shorty/micro or go long w/ a 14" unlimited silhouette bull barrel and/or go back and forth if that's what floats your boat!

Thanks Rusty, I'll be on the hunt for a good priced BM and Frankenstein it!

[GeneT]

Originally Posted by newbie1234

Very simple, Countour and Lite (long barrel), just a thump rest grip on Lite everything else are stock.

I just bought a 7.25 Lite, where did you get the grips? I didn't think URX grips were very available. Thought I might have to make my own.

Gene

[TripleThreat]

With the older 7" Tactical Solutions barrel.

Bmark .jpg

[Joeflyer]

Buck Mark Plus Stainless UDX with Outerimpact mount adapter and Vortex Venom 6 moa
From Bud's
Buck Mark.jpg

[B2D]

Great thread!!

This is my first post on this forum, and I really like Buckmarks, so this is a cool thing to see.

Love the way the Contour models look, though I've only shot the URX models.

[steelholder]

recently bought from a calgunner.

[gunsnrovers]

[Mangy Coyote]

Here’s my Buckmark with IDF suppressor. Just need to put a red dot on it.

[pagedeveloper]

http://page-developer.org/Accounting/swimming/0.jpg

This is mine, and he is in a ten day hold, for the good old Comifornia. Next thursday I get it out.. Looking forward to it...

[pagedeveloper]

[QUOTE=newbie1234;21891577]Very simple, Countour and Lite (long barrel), just a thump rest grip on Lite everything else are stock.




I really like the bag you have, where did you get it?? I have a colt woodsman, that would fit in there nicely also. So I can carry my woodsman, and buckmark together...

[golfish]

Originally Posted by GeneT

I just bought a 7.25 Lite, where did you get the grips? I didn't think URX grips were very available. Thought I might have to make my own.

Gene

My setup is just like the one on the bottom left. I paid 379.00 plus tax and dros for it.

10 years ago I would have never thought about spending 450.00 for a 22 handgun, maybe a Ruger Bearcat.

IMO, its the most interesting shooter I have. The red dot really changed the way I look at handguns. I'm a terrible shot with a handgun, very little practice, poor skills and no training is too blame. The red dot makes it easy to get on target, its a very accurate gun.

I doubt I'll buy another one but I can't think of a better investment than one of these.

[NorCalEmperor]

BMpic1.jpg

heres a quick pic of mine: TS rail, PA micro

been looking for better, slimmer grips for my standard UFX. I find it just a tad bit on the larger side and the kids have a harder time as well. are they difficult to swap out? kiddos and I have a great time with this. so easy to shoot and is not picky with ammo.

digging all the pics, too.

thanks in advance.

[newbutold]

Some good looking pistols

[newbie1234]

[QUOTE=pagedeveloper;22215729]

Originally Posted by newbie1234

Very simple, Countour and Lite (long barrel), just a thump rest grip on Lite everything else are stock.




I really like the bag you have, where did you get it?? I have a colt woodsman, that would fit in there nicely also. So I can carry my woodsman, and buckmark together...

Sorry, I did not check back this thread for a while .
Here you are.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[RollingCode3]

[jross239]

Still need to get a different mount, but happy with how my Buck Mark turned out

Sent from my SM-N950U using Tapatalk

[Tunabliss]

Technically, one is a Challenger II but both are accurate and fun to shoot.

Buckmark contour.jpg

Challenger II.jpg

[gunsnrovers]

Hard to find decent grips for this frame, but I found the Hogue's for a screaming deal. Like them much more than the rubber ones it came with.

[triggs75]

Just switched to 1911 grips



Chad

[BananaKetchup]

Pretty fun to shoot.