2017 Cali Complaint
1 Attachment(s)
For those of you who want to convert an AR they already own or to buy a new one next year.iframe width="560" height="315" src="https://www.youtube.com/embed/SPUIGg9y16s" frameborder="0" allowfullscreen></iframe
|
NICE! :-) looks a lot better compared to AR Maglock or other CALI compliant device/tool.
Are you planning on making the same stuff for your AR-9? |
Fixed your posted link.....just copy the SPUIGg9y16s from your youtube share and paste in between the youtube brackets.
|
Yes it will work on the 223, 308, and the 9mm AR's.
|
Price and release date?
|
Tagged.
|
where do I buy on of these ?
|
They will be available in early to mid Dec ( we are in production now). Price point will be approximately $100.00 installed.
|
is the product in stock now?
|
Compliant not complaint. Good design there.
|
Has CalDOJ ruled on these types of devices yet?
|
There won't be a ruling from DOJ for quite awhile, and just like the Bullet Button the is no way to tell what they decide months or years down the road. But it meets the law as written, in that opening the receivers is a disassembly step.
|
I have a San Tan Tactical STT-15... kind of an oddball because the lower is actually taller than all milspecs I've seen. The AR MagLock isn't tall enough to touch the upper, and the ambi controls get in the way, and the Prince device dosent fit either... wondering if you've tried your device on a San Tan and if it'll fit. I really don't want to build a featureless rifle...
Todd |
Does this come as a kit. Can't seem to find it on your website.
|
We have not tried it on a San Tan but it should work. Yes it will be available as a kit as soon as the official introduction at the Shot Show next week.
|
Can you post installation instructions? Would like to see what's involved...
Todd |
There is one small hole to be drilled and tapped, a drilling fixture will be available. Very clear instructions will be included with each kit. Or you can send us your lower and we will drill and tap it for you.
|
tagged
|
i like that a lot
|
Bob,
Thanks for the reply.... I think you're talking about the pin on the right side.... the San tan has a ambi bolt release and there is a roll pin in that area... again... this is a real oddball lower... maybe you guys could take a look at it at SHOT and let us know? Todd |
I will chase one down at Shot and take a look.
|
Tagged for further info
|
This looks to be a really great solution!
|
I saw it in person today & it is definitely a game changer
|
It looks freaking amazing... just hope it'll work on my SanTan stt-15
|
Quote:
THANK YOU for helping those of us behind the iron curtain. Will be buying one as soon as they are available. |
2017 Cali Complaint
I did not see this product or the 180* rear take down pin on your website, are they available?
|
Is it reversible if you take it out of state?
|
Quote:
Not yet. |
Calguns.net shooting team just posted a video of it to there FB page and said pricing was expected to be around $125, kinda steep
Found some other news on it: http://www.thefirearmblog.com/blog/2...tch-shot-2017/ |
:cool::43::chris:
|
Final pricing and availability information will be should be available by the end of next week.
|
Hi Bob,
Any chance you were able to track down a San Tan lower to check fitment for your new CA Compliant device? Thanks, Todd |
I didn't get a chance to get out of the booth all week. But I am going to ask SanTan to send me a lower to look at.
|
Any updates?
|
just checked the website, nothing new posted
|
Tag for later!
|
Tag I'm going to need 4 please.
Any discounts for buying multiples. |
Sig p556
Will this work with the Sig p556 classic?
|
I think these guys may not be able to release their product. LWRCI showed something not exactly the same, the only difference is that their little button, is on the side of the bolt release versus being on the side of the mag release.
Not sure if the LWRCI version is patented or just pending but hope both sides can come to an agreement. Oh, and the LWRCI is only on new CA version of rifles versus the other being an upgrade. |
All times are GMT -8. The time now is 8:52 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.