Calguns.net

Calguns.net (https://www.calguns.net/calgunforum/index.php)
-   Aim Sports Inc. (https://www.calguns.net/calgunforum/forumdisplay.php?f=389)
-   -   Magpul Stock Lock Pin Now Available (https://www.calguns.net/calgunforum/showthread.php?t=1295238)

Aim Sports Inc. 01-23-2017 1:15 PM

Magpul Stock Lock Pin Now Available
 
The Aim Sports Designed Magpul Stock Lock Pin is now available for purchase through our website and can he found here:

https://aimsportsinc.com/platforms/a...-lock-pin.html


http://i64.tinypic.com/dmecsj.jpg

Sigbird 02-05-2017 7:18 AM

Best product bar none for pinning your Magpul stock @ $11 to your door.

damngato 02-08-2017 12:49 PM

Going to give it a shot, order placed. Will report back

george@aimsportsinc.com 02-09-2017 9:46 AM

Thank you sir for you purchase. Please post up some pics if you get a chance. :D

Aim Sports Inc. 02-10-2017 12:32 PM

Here is a step by step guide on how to install the Stock Lock Pin on the STR Series Magpul Stocks.
https://i.imgsafe.org/e16a1c08ef.jpg

Aim Sports Inc. 02-10-2017 12:33 PM

Here is the standard Install Guide for the Magpul Stock Lock Pin
https://i.imgsafe.org/e1708512fe.jpg

damngato 02-11-2017 11:28 AM

This product is good to go! Thank you for the above pictures as my STR would have baffled me. Easy to install and works like a charm. Will be ordering more. If I can do it anyone can!

UberPatriot 02-11-2017 12:25 PM

Couldn't you just fill the space in the existing pin to prevent it's movement?

I'll try a tiny wedge in the slot below the roll pin.

george@aimsportsinc.com 02-11-2017 1:17 PM

Quote:

Originally Posted by UberPatriot (Post 19656283)
Couldn't you just fill the space in the existing pin to prevent it's movement?

I'll try a tiny wedge in the slot below the roll pin.

I'm sure there is a million and 1 ways to block a stock. However, this is a 1for1 replacment that doesn't need drilling, gluing, epoxy, extra pins, screws, a trip to the hardware store, or anything other than the OEM parts. :D

ETA: admittedly I look for any excuse for a trip to the hardware store. :43:

george@aimsportsinc.com 02-11-2017 1:18 PM

Quote:

Originally Posted by damngato (Post 19656007)
This product is good to go! Thank you for the above pictures as my STR would have baffled me. Easy to install and works like a charm. Will be ordering more. If I can do it anyone can!

Awesome, glad to hear it helped!!

damngato 02-17-2017 10:38 AM

Quote:

Originally Posted by george@aimsportsinc.com (Post 19656543)
Awesome, glad to hear it helped!!

Any directions for installing on and ACS? Saw it listed on the site but not sure best way to get to everything.

Aim Sports Inc. 02-17-2017 2:09 PM

Magpul ACS Stock disassembly

1. Remove buttstock
2. Slide storage compartments out
3. Remove Friction Lock Roll Pin
4. Follow standard instrustions
http://i65.tinypic.com/a2gd5k.jpg

Aim Sports Inc. 02-20-2017 1:14 PM

These are back in stock. https://aimsportsinc.com/magpul-stock-lock-pin.html

stitchnicklas 03-31-2017 7:04 AM

1 Attachment(s)
Used this pin as a component in pinning a regular stock also in building a featureless for a customer.to extra roll pinsand deconstructing the existing pin system came out with a good lookhttp://attachment.php?attachmentid=594750&d=1490972619

george@aimsportsinc.com 03-31-2017 8:03 AM

Quote:

Originally Posted by stitchnicklas (Post 19897193)
Used this pin as a component in pinning a regular stock also in building a featureless for a customer.to extra roll pinsand deconstructing the existing pin system came out with a good lookhttp://attachment.php?attachmentid=594750&d=1490972619

Very Cool.. :notworthy:

We also have our M4 pins that work with that stock. :)

http://i66.tinypic.com/23ke0ep.jpg

Mesa Defense 06-24-2017 8:13 PM

Does this work with SL stocks?

george@aimsportsinc.com 06-25-2017 8:26 PM

Quote:

Originally Posted by Mesa Defense (Post 20281925)
Does this work with SL stocks?

Yes they will work with the sl line of stocks.

dat1callidude 06-25-2017 8:30 PM

Tag

rider1deep 09-11-2017 9:29 AM

Where are the STR instructions? I'm ready to purchase, but I want to make sure I know what to do beforehand.

KT_SF 09-13-2017 2:01 AM

OP, the installation guide pics that were originally in Posts #5 and #6 above are no longer appearing (and the aimsportsinc.com website currently doesn't appear to provide installation instructions either).

KT

wpage 09-13-2017 2:11 AM

Why not just drill and tap it off with a pin and split ring?

george@aimsportsinc.com 09-13-2017 1:07 PM

1 Attachment(s)
not sure what happen to our instructions but here are the STR instructions.

Attachment 639937

PoorMan 10-23-2017 7:57 PM

Do you have instructions for the CTR?

PoorMan 10-27-2017 1:53 PM

I was able to figure it out without instructions. Pretty simple if you take your time. I am quite pleased by the end result and cost effectiveness of this product.

Like Sigbird noted, the top hole is a little too small to accept the upper pin so you will have to drill it. This added about 2 mins to the process for me.


Quote:

Originally Posted by Sigbird (Post 19620594)
Best product bar none for pinning your Magpul stock @ $11 to your door. Keeps the factory look and your stock won't move a MM. FYI, You will need to clean up the top hole with the same diameter drill bit for the upper pin to fit. Otherwise 5 min to install.


October 11-13-2017 7:05 PM

Anyone done this on an ACS stock? I can not figure it out

george@aimsportsinc.com 11-17-2017 12:24 PM

Quote:

Originally Posted by October (Post 20902201)
Anyone done this on an ACS stock? I can not figure it out

ACS stock is in post #12. Pm me if you need any help with it.
Thank you

Danodog 01-07-2018 6:14 PM

Quote:

Originally Posted by george@aimsportsinc.com (Post 20917489)
ACS stock is in post #12. Pm me if you need any help with it.
Thank you

I am having problems with removing the storage compartment covers on the ACS stock. The photos above do nothing for me. Any ideas?

EDIT: I realize that I have an ACS L stock. Is the pin comparable with the light version of the ACS?

george@aimsportsinc.com 01-12-2018 8:46 AM

Quote:

Originally Posted by Danodog (Post 21126475)
I am having problems with removing the storage compartment covers on the ACS stock. The photos above do nothing for me. Any ideas?

EDIT: I realize that I have an ACS L stock. Is the pin comparable with the light version of the ACS?

Hello Sir,
Our pin is compatible with the ACS-L. Installing it is just like the CTR stock where you need to remove the friction lock roll pin to access the plunger. I responded to your other thread and hope it worked out. If you have any other questions please PM me.
Thank you

FDE226 01-16-2018 4:07 PM

Hi George,

Will your Daniel Defense Pin kit work with Magpul stocks as well?

george@aimsportsinc.com 01-19-2018 10:47 AM

Quote:

Originally Posted by FDE226 (Post 21163327)
Hi George,

Will your Daniel Defense Pin kit work with Magpul stocks as well?

FDE226,
Sorry but the Daniel Defense stock pin will only work with Daniel Defense stocks. We have a Magpul specific pin for their stocks.

FDE226 01-20-2018 10:41 AM

Thanks George, I installed the Magpul pin this week. Works great, easy install, and it's cheap!

WHH 03-20-2018 4:04 PM

Has anyone tried one of these pins in a Luth-AR carbine stock?

ttn333 04-20-2018 9:23 AM

Are there clearer instructions for Daniel Defense? I'm having a heck of a time trying to install this pin.

WHH 04-27-2018 10:26 AM

Quote:

Originally Posted by WHH (Post 21424405)
Has anyone tried one of these pins in a Luth-AR carbine stock?

Reporting in to note that this does work, but the screw is too long. Either trimming it or replacing it with a shorter one will do the trick.

Nesproc 12-11-2018 10:18 AM

Has anyone removed the pin from an STR without drilling the rivets?

damndave 04-03-2019 1:17 AM

Just ordered one for my STR. Let's see how this goes.

damndave 04-09-2019 10:29 PM

Install took about 30-45 minutes. Wasn't too hard but is a decent amount of work. Does the job fine.

FlyingShooter 04-12-2019 7:23 PM

....

ParaLarry 06-13-2019 7:01 PM

Page not found
 
1 Attachment(s)
Went looking for it but page not found.
Took some digging but found it and ordered.


All times are GMT -8. The time now is 11:02 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.