How to apply Cerakote in layers for stencils and patterns
Posted 06-28-2015 at 7:41 AM by Germz
This is advice from member kcstott:
"I've had good luck baking at 150˚ for about twenty minutes, mask, shoot, and bake again. Do this until your last color is applied an bake at the highest temp your base material can take:
wood and plastic = 150˚ to be safe
metal = up to 350˚
add an hour for every 100˚ you subtract from 350˚ starting with a one hour cure".
"I've had good luck baking at 150˚ for about twenty minutes, mask, shoot, and bake again. Do this until your last color is applied an bake at the highest temp your base material can take:
wood and plastic = 150˚ to be safe
metal = up to 350˚
add an hour for every 100˚ you subtract from 350˚ starting with a one hour cure".
Total Comments 0
