heythorp
12-04-2013, 5:57 PM
Karh
PM9:
9mm
SFB:
$750
Will ship (N):
I bought this PM9 a couple years ago from another Calgunner. It runs great. I have feed all different kinds of ammo through it. FMJ/Brass/Steel/ and many different hollow points. I have not had a failure to feed from any ammo.
It comes with:
Factory installed night sights: They still glow, but not as strong as original.
Original case and manual: (previous owner drilled a hole through it so he could lock it)
1 7 round Mag
2 6 round mags
1 ITW leather holster
1 Kahr pocket holser
This was purchased for traveling out of the area. Guess what. The travel didn't happen like I thought it would. I have my CCW for many other states, just not this one, so its been sitting.
I just changed all of the springs in the entire gun and kept the old ones for back up. I'm just back from the range. I put 70 rounds through it with zero issues.
The corner of the slide release was previously grinder by the former owner. It works great. No digging into the thumb.
I know people will ask how many rounds? I really don't know. I personally have about 350 through the gun ( And I think I am exaggerating to be safe). It's definitely not something you sit and shoot for 500 rounds at a time. As a matter of fact the 70 I just put through it is probably the most I have ever done at one time. Most of the time (if taken to the range at all) its only 3-5 mags worth. I only ran 70 this past time to make sure it was working after replacing the springs and putting it up for sale.
I am happy to meet at Reeds and let the buyer test the gun before buying. (buyer pays range fee). Other wise I would prefer to meet at Imbert & Smithers in San Carlos.
Thanks for looking.
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0823_zpse4fbc0e2.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0817_zps4ced9847.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0819_zps4227c69d.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0818_zps9fa1e9f6.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/bd6aeabf-5883-4bb6-aea1-30df67312144_zps53e72686.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0840_zps35255401.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0839_zpsdeef6171.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0836_zps6da5e748.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0834_zpse9489cc0.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0826_zpsaafd9600.jpg
PM9:
9mm
SFB:
$750
Will ship (N):
I bought this PM9 a couple years ago from another Calgunner. It runs great. I have feed all different kinds of ammo through it. FMJ/Brass/Steel/ and many different hollow points. I have not had a failure to feed from any ammo.
It comes with:
Factory installed night sights: They still glow, but not as strong as original.
Original case and manual: (previous owner drilled a hole through it so he could lock it)
1 7 round Mag
2 6 round mags
1 ITW leather holster
1 Kahr pocket holser
This was purchased for traveling out of the area. Guess what. The travel didn't happen like I thought it would. I have my CCW for many other states, just not this one, so its been sitting.
I just changed all of the springs in the entire gun and kept the old ones for back up. I'm just back from the range. I put 70 rounds through it with zero issues.
The corner of the slide release was previously grinder by the former owner. It works great. No digging into the thumb.
I know people will ask how many rounds? I really don't know. I personally have about 350 through the gun ( And I think I am exaggerating to be safe). It's definitely not something you sit and shoot for 500 rounds at a time. As a matter of fact the 70 I just put through it is probably the most I have ever done at one time. Most of the time (if taken to the range at all) its only 3-5 mags worth. I only ran 70 this past time to make sure it was working after replacing the springs and putting it up for sale.
I am happy to meet at Reeds and let the buyer test the gun before buying. (buyer pays range fee). Other wise I would prefer to meet at Imbert & Smithers in San Carlos.
Thanks for looking.
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0823_zpse4fbc0e2.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0817_zps4ced9847.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0819_zps4227c69d.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0818_zps9fa1e9f6.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/bd6aeabf-5883-4bb6-aea1-30df67312144_zps53e72686.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0840_zps35255401.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0839_zpsdeef6171.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0836_zps6da5e748.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0834_zpse9489cc0.jpg
http://i25.photobucket.com/albums/c76/heythorp/PM/IMG_0826_zpsaafd9600.jpg