PDA

View Full Version : Can anyone finish my 80% lower reciever?


timcorexxx
11-18-2013, 6:57 PM
I bought a 80% lower and need to finish it. I don't have the proper things to finish it and will pay someone to finish it. All the holes are drilled, I just need the trigger section milled out. If anyone can help me out by finishing it for me I would really appreciate it. My email is timcorreia@me.com.

Seventh
11-18-2013, 6:59 PM
in short, no

nismobishi
11-18-2013, 7:00 PM
In short, long, or any length.... No!

bbgughj
11-18-2013, 7:03 PM
Nice try Mr . ATF :rofl2:

shda5582
11-18-2013, 7:09 PM
Nice try Mr . ATF :rofl2:

Most obvious AFT troll I think I've seen.

m16
11-18-2013, 7:16 PM
Spend $4000 on a Bridgeport with a Mitutoyo digital readout and finish it yourself.

That's what all the cool kids do.

You wanna be cool, don't you???

Capybara
11-18-2013, 7:16 PM
Sure Tim. Just find an FFL07/SOT2 and they can help you finish it, DROS it and do all of the paperwork!

BroncoBob
11-18-2013, 8:00 PM
LMAO

:rofl2::rofl2::rofl2:

gun toting monkeyboy
11-18-2013, 8:46 PM
Just go buy a lower and be done with it. Otherwise, go get a drill press and a jig, and have at it. The whole legal point of an 80% lower is YOU make it. Otherwise, you are just trying to buy an illegal gun. And in case you didn't catch it by the other poster's responses, we don't really care for idiots who do that kind of thing. That is a good way to A) get arrested, and B) Lose the rest of us who actually do put in the work to make our own guns in jeopardy. Do us all a favor and either do your 80% yourself, or sell it and buy a lower. Don't screw us over because you are too lazy.

-Mb

cpatbay
11-18-2013, 8:48 PM
Do it yourself or you will just have to keep it as a paper weight. Nobody can finish it for you.

Sofatactical
11-18-2013, 8:51 PM
OMG this cant be real.

xjdesertfox
11-18-2013, 8:58 PM
Sure Tim. Just find an FFL07/SOT2 and they can help you finish it, DROS it and do all of the paperwork!

this.

M_lizar
11-18-2013, 8:58 PM
Seems like your to lazy to do it yourself and it will be a paper weight forever, I'll gladly take it off your hands.

G21Shooter
11-18-2013, 9:00 PM
Rough crowd here. Obviously if the guy is asking to have someone help him finish his lower he does not know the laws.

Instead of a bunch of hostile replies maybe someone could take the time and explain why its illegal.

(Of course he could be a troll, ATF or both. I am just giving him the benefit of the doubt)

TheDigitalPicasso
11-18-2013, 9:21 PM
Rough crowd here. Obviously if the guy is asking to have someone help him finish his lower he does not know the laws.

Instead of a bunch of hostile replies maybe someone could take the time and explain why its illegal.

(Of course he could be a troll, ATF or both. I am just giving him the benefit of the doubt)

You sir are a class act and a real true calguner...

TheDigitalPicasso
11-18-2013, 9:26 PM
I bought a 80% lower and need to finish it. I don't have the proper things to finish it and will pay someone to finish it. All the holes are drilled, I just need the trigger section milled out. If anyone can help me out by finishing it for me I would really appreciate it. My email is timcorreia@me.com.

As to your question only you can complete the 80% you have to mill it out and drill all the holes. There are a lot of places that you can go to and they have milling machines and you rent them out and some that works there will walk you through the process.

If you want my 2 since I would just buy a complete lower from a LGS and dross it. Not unless if you're into engraving and you really don't want a serial number on your lower then 80% is the way to go but to save time I would just buy a MEGA Lower.

clipofblanks
11-19-2013, 6:31 AM
A Scholar and a gentleman

johnniezombie
11-19-2013, 6:37 AM
First i felt the hate, now i feel the love lol

trphytruck01
11-19-2013, 6:42 AM
I have had great luck with these guys, The delivery time is a little slower than I would like , but it's a good product.

1(323) 753-8800 Talk to the manager to see if he can bump up delivery time.

SoCal Gunner
11-19-2013, 6:47 AM
I have had great luck with these guys, The delivery time is a little slower than I would like , but it's a good product.

1(323) 753-8800 Talk to the manager to see if he can bump up delivery time.

^WUT?


PS - Pizza Hut sucks

trphytruck01
11-19-2013, 6:54 AM
^WUT?


PS - Pizza Hut sucks

;) ....Lmao

-hanko
11-19-2013, 7:30 AM
Rough crowd here. Obviously if the guy is asking to have someone help him finish his lower he does not know the laws.

Instead of a bunch of hostile replies maybe someone could take the time and explain why its illegal.

(Of course he could be a troll, ATF or both. I am just giving him the benefit of the doubt)
If he does not know the laws, at least he could read a bit here and figure it out...it's not like build parties / diy /atf / raided cnc shops are not on the front page in more than a couple of forums here, as well as having been there for a few weeks.

Jaybird
11-19-2013, 8:02 AM
Is this an early April Fools joke? If so i have a bazooka for sale i built from 80%.(JK). April Fools in November. Haha.

bass_blaster
11-19-2013, 8:06 AM
282037

CSACANNONEER
11-19-2013, 8:13 AM
Hi, I bought something I knew nothing about, haven't done any homework, don't know or care about legalities and am looking for someone to conspire with me and commit multiple firearms related felonies. Can someone please help me?

RamonSJC
11-19-2013, 8:19 AM
Lol! This is classic!

AKSOG
11-19-2013, 8:29 AM
....

bohoki
11-19-2013, 8:35 AM
i gotta ask would it be legal for him to sell it as an 80% anymore i guess we are just waiting on atf clarification

marlin357
11-19-2013, 9:10 AM
lol. do it yourself, or buy a stripped lower and dros it.

SILENT GUNMAN
11-19-2013, 9:11 AM
He can't even sell it now. He drilled the holes so its now more than 80% complete. He's stuck with that thing forever now.

DemocracyEnaction
11-19-2013, 9:19 AM
Or the smartest ATF. Could be a probe to judge reaction. Or identify potentials. Know your enemy and never underestimate.

ojisan
11-19-2013, 9:21 AM
OP: FYI
http://www.calguns.net/calgunforum/showthread.php?t=841799

seainc
11-19-2013, 9:25 AM
:rolleyes::confused:Mod leave thread like these open must have a reason.

tpliquid1
11-19-2013, 10:28 AM
roll bread thread

Write Winger
11-19-2013, 10:30 AM
These guys can help. For a few extra dollars, they'll make it rock and roll. And if you're willing, you might get something that's never been done before.

Shipped right to your door!

http://www.redjacketfirearms.com/

SFCRangerDoc
11-19-2013, 10:58 AM
These guys can help. For a few extra dollars, they'll make it rock and roll. And if you're willing, you might get something that's never been done before.

Shipped right to your door!

http://www.redjacketfirearms.com/

[ROFL]

CSACANNONEER
11-19-2013, 11:18 AM
These guys can help. For a few extra dollars, they'll make it rock and roll. And if you're willing, you might get something that's never been done before.

Shipped right to your door!

http://www.redjacketfirearms.com/

Wow, having them do the work would sure be a game changer.

SoldierLife7
11-19-2013, 11:22 AM
I can do it for you....


But I would have to keep it after I finished it. Wait..I like that idea. I can help you!

furyous68
11-19-2013, 11:55 AM
Just go buy a lower and be done with it. Otherwise, go get a drill press and a jig, and have at it. The whole legal point of an 80% lower is YOU make it. Otherwise, you are just trying to buy an illegal gun. And in case you didn't catch it by the other poster's responses, we don't really care for idiots who do that kind of thing. That is a good way to A) get arrested, and B) Lose the rest of us who actually do put in the work to make our own guns in jeopardy. Do us all a favor and either do your 80% yourself, or sell it and buy a lower. Don't screw us over because you are too lazy.

-Mb

^^^THIS!

A stripped lower would cost less than hiring someone with the equipment & skills (and the proper license) to complete it for you. Mine cost $150 out the door at the height of the buying frenzy. You're +/-$80 into the 80% lower... and probably looking at another $200 or more for DROS & Machine work.

SigUser
11-19-2013, 7:33 PM
How in the world did the OP drill out the holes in the fire pocket correctly without the tools? definitely atf or a troll

The Bubble
11-19-2013, 7:53 PM
Stupid, sounds like a TRAP!!!! So that's like saying.... I don't want to go through dros... Can you buy a gun for me?? Sorry man, but if you don't have in you to do an 80 percent, then you need to buy one instead.... Or you're shady and have something to hide and you'll make an *** out of the firearm community. Bro, stick to airsoft instead....

rm1911
11-19-2013, 9:22 PM
Wouldn't this be entrapment if it was ATF? Please correct me if I'm wrong.

North86
11-19-2013, 9:28 PM
Assuming it's still 80% or less, and you have the paperwork from the manufacturer of your paperweight, I am sure you could sell it. Maybe $35? :lol:

CSACANNONEER
11-20-2013, 3:52 AM
Wouldn't this be entrapment if it was ATF? Please correct me if I'm wrong.

Ever heard of Ruby Ridge?

rm1911
11-20-2013, 6:08 AM
Ever heard of Ruby Ridge?

Of course. But Vicky weaver was carrying, as I understand it, a short barreled, fully automatic assault baby.

sl0re10
11-20-2013, 6:14 AM
Most obvious AFT troll I think I've seen.

or a 'reporter'.

SILENT GUNMAN
11-20-2013, 9:45 AM
Anyone else notice OP never came back? Must be and agent that realized we were too smart to trap. He's probably moved on to another forum.

North86
11-20-2013, 3:10 PM
He made another post to make up for this silly one. All good.

Superduper2013
11-20-2013, 3:47 PM
Where you located there are a few cnc shops floating around that will let you rent their equipment. FYI per ATF your 80% just became a 100% when you drilled those holes.

klewan
11-20-2013, 5:44 PM
Where you located there are a few cnc shops floating around that will let you rent their equipment. FYI per ATF your 80% just became a 100% when you drilled those holes.

So what he needs to do is find someone with the correct FFL license to work on guns? Or a license to make guns? Seems like a FFL holder could touch it and not break the law, or am I wrong?

JDay
11-20-2013, 5:47 PM
Are you soliciting for someone to commit a felony? You have to do the machining yourself.

JDay
11-20-2013, 5:52 PM
So what he needs to do is find someone with the correct FFL license to work on guns? Or a license to make guns? Seems like a FFL holder could touch it and not break the law, or am I wrong?

Sure, he could pay an 07-FFL to complete it for him but it would be cheaper to buy a complete lower.

John Browning
11-20-2013, 6:01 PM
If this level of trolling catches criminals then criminals be dumb.


I want to buy medical meth for weight loss. anybody know a good lab?

klewan
11-20-2013, 6:30 PM
Sure, he could pay an 07-FFL to complete it for him but it would be cheaper to buy a complete lower.

Thanks for the answer, it's always about the money....

BrassCase
11-20-2013, 7:09 PM
If this level of trolling catches criminals then criminals be dumb.


I want to buy medical meth for weight loss. anybody know a good lab?

You mean one where you bring the ingredients and they teach you how to make it?