PDA

View Full Version : 6.8 SPC complete Upper


StudioDison
03-13-2010, 3:58 PM
This Upper is practically brand new, there is less than 50 rounds thru it.
I dont really want to sell it but must. It shoots 1" MOA @ 100yards. If you know anything about the 6.8 revolution, youll know the quality of this upper. The wait for a new one is a long one. there is a couple nicks on the shell deflector, other than than, perfect.
"Extreme" built by AR15 Performance
only the upper is for sale, not the lower.
Price is $780
I also have 80 rounds of SSA 85 Grain Barnes and 120 rounds of SSA 90 gr Speer TNT for an additional price once upper is sold. Located in Bakersfield.

16" Barrel
~4150 Chromoly, Nitrocarburized (QPQ)
to 70 Rockwell
~1:11.25 Twist, 5R Rifling
~Recon-L profile (.700 / .600)
~Made to ARP specs by a quality barrel manufacturer
~Mid length gas system w/ pinned gas block

Upper Receiver
~Mil Spec 7075-T6 Aluminum Forging
~ Mil-A-8625 Type III Class 2 Hard Anodized
~M4 Extended feed ramps
~Barrel exension bedded to a squared receiver

ITS 9310 Alloy 6.8 Bolt
~MP Tested
~Area around cam pin hole 17% thicker on each side
with the hole slightly smaller to remove play and
prevent breakage
~Lug attachment to the web increased by 40%
~Extractor and Ejector springs upgraded
to 9002 chrome silicon, heat treated,
shot peened, stress relieved springs with
80% extra power, 50,000 duty cycle life span


Premium Bolt Carrier
~Hi Grade allow screws
Staked and counter staked

Hand guard
~YHM rifle length Customizable Free Float Forearm System
YHM Forearm End Cap
YHM Low Pro Gas Block

Flash Hider

~DPMS Panther

Magpul Flip sights front/rear

Two 10 round Mags 1 new, 1 used (free)
http://i526.photobucket.com/albums/cc349/Corydison/photo2.jpg
http://i526.photobucket.com/albums/cc349/Corydison/photo3.jpg
http://i526.photobucket.com/albums/cc349/Corydison/photo.jpg

StudioDison
03-13-2010, 10:09 PM
If someone wants the upper w/out the Magpul sights subtract $80

StudioDison
03-14-2010, 3:23 PM
THanx for the PM's. I can't hold it for everyone. So first to post "I'll take it. Pm sent" gets first dibs.

Jpach
03-14-2010, 3:55 PM
Guys, this is a GREAT deal and an AWESOME upper. I would buy it myself but Im working on a .260 AR :(

Get it while you can.

motojosh
03-14-2010, 3:56 PM
I'll take it w/o the magpul sights. Pm sent.

Thanks,
Josh

StudioDison
03-14-2010, 5:17 PM
Motojosh got dibs!

StudioDison
03-14-2010, 5:19 PM
Thanx for the boost Jpach!