PDA

View Full Version : Measuring Extracter Height


Greg Beck
09-22-2009, 9:54 AM
I measured the extracter height on my rem 721 using solder. Squared up a tiny piece of solder into a small block. Tapped the block into space between bolt face and extarcter, then eased it out with a pin. Measured .058, to small for a 6.5x55 case.

Faust
09-25-2009, 7:39 PM
and the point is??????

ar15barrels
09-26-2009, 1:36 AM
http://lesitedenini.free.fr/rabbit_pancake.jpg