PDA

View Full Version : Where are the AK pistols?........


Pages : 1 [2] 3

nicoroshi
06-20-2010, 9:26 PM
Just finished mine tonight.
She's a lathed, and cut Yugo M-70 barrel with Romanian underfolder rear trunnion, and Egyptian front end parts with a home modified UTG quad rail on a bent flat.
Dropped in a Tapco G2 double hook (I like the pull of them), mounted a Hogue grip over an old AR-15 stock sling mount screwed into the base of the receiver. Built my own mag lock based on the jumbopanda design. Installed Bulgarian FSB/GB combo, and 4 piece FH.


(trying to use up most of the spare parts I had laying around from other builds)
[Updated Pic]
http://img412.imageshack.us/img412/8830/dscn4176f.jpg

Shoots great for a pistol built using parts from USA, Yugoslavia, Bulgaria, Egypt, and Romania.

Currently bending up, and welding an extension piece to a Yugo dust cover to make it long enough to use on my pressed flat, and replace the Egyptian one with it.

djleisure
06-23-2010, 11:47 AM
First off, this is my first post. I've been lingering on this forum for quite a while and im not even in cali. Im actually on the other side of the country (North Carolina). Excellent source of info IMO. I just wanted to say, DJLeisure, that is the coolest AK ive ever seen. I think ill build one. And i hope you guys dont mind me jumpin in on some of the froums from time to time.
Thanks, man! Welcome to Calguns and feel free to ask any questions you might have!

I don't have any new photos to add, but since this is a picture thread I'll throw up an oldie!

http://i1006.photobucket.com/albums/af189/dj_leisure/IMG_8388.jpg

RookieShooter
06-23-2010, 11:54 AM
Picked up my Draco yesterday. Will post pictures after going through some makeover and thanks to Peach State Guns & Independent Armament for the flawless transaction. :cheers2:

Sam1
06-23-2010, 7:04 PM
http://i82.photobucket.com/albums/j258/FIVESIXTN/DSC04414.jpg

This won't stay a pistol for very long. I'll be converting it to a rifle, a Romanian Krinkov clone. :)

I have a question, is anyone else having problems with their draco and this mag lock? I find it way too hard to remove the mag and I don't think I can do it with a bullet. mag release lever doesn't go all the way because the mag lock gets in the way, had to use the short part of an L wrench to release the mag and even then it's a bit of a hassle

RookieShooter
06-24-2010, 8:47 AM
I'm using a socket screwdriver and it works like a charm.

teeteemongo
06-26-2010, 5:34 PM
Because of this thread, i have totally abandoned plans to convert my Saiga and instead SELL it and buy an on sale Draco from Peach State guns.... sigh.

Some seriously nice ak pistols here, its like there was this whole new world that just opened to me... Hope some of you dont mind if I emulate your builds :S
Posting pics to this awesome thread when I get mine!

247Nino
07-26-2010, 1:06 PM
wooo! twins!

http://img153.imageshack.us/img153/9489/nin3560.jpg
http://img835.imageshack.us/img835/2909/nin3599.jpg

UTG rail, I hate working with aluminum!
http://img443.imageshack.us/img443/5073/nin6675.jpg

Notblake
07-27-2010, 8:38 PM
http://img230.imageshack.us/img230/644/img00291201007272100.jpg

YAY! finally in for play-time with my new east german style AK pistol I/O stp2000.

Juice5610
07-30-2010, 11:41 PM
If I buy a ak pistol here in cali and I move to Arizona would I be able to add a folding stock to it? After paying the sbr tax of course. What would I need to do in order to add a stock to it?

E-120
08-02-2010, 4:38 PM
Here is my latest for the collection. Built in a remote San Diego camp...
http://i442.photobucket.com/albums/qq147/dhc-60/m-92-1.jpg

LakersALLDAY
08-08-2010, 3:41 PM
Can someone show me what the Draco would look like with the OD Green MI Quadrail and then with the Black MI Quadrail attached? i need help deciding....
And also, is the muzzle brake hard to install??? where can i get some instructions to successfully put on the muzzle brake
THANKS

trashman
08-08-2010, 8:36 PM
Shot this pic of my Draco this afternoon; what a fun "little" gun to shoot!

I was taking some pictures of vintage S&W's and threw this up there...it looks just...wrong on the backdrop, but oh well.

--Neill

http://i231.photobucket.com/albums/ee126/northslope/various-sunday/various012.jpg

bigthaiboy
08-20-2010, 6:02 PM
8" pistol built from a Hungarian AMD-65 kit:

http://i136.photobucket.com/albums/q163/bigthaiboy/AKpistol.jpg

mike22ca
08-24-2010, 10:03 PM
I came across some of these mounts and figured it would work nice for my dracos... what do you guys think?

69Mach1
08-24-2010, 10:22 PM
I think that's pretty cool. Now, are you going to tell us where to get them? :)

Baron
08-24-2010, 10:39 PM
That looks really nice...
Can you still use the Irons if you remove the optic?

Looks almost like
http://www.scoutscopes.com/

But not as bulky
I like it:)


If I see another Draco, I'm going to throw up.


Here's Mine :D LOL
http://img.photobucket.com/albums/v213/GORZACK/Shooting/Draco08-20-10007s.jpg

mike22ca
08-25-2010, 2:30 PM
69Mach1 - If you gimme a box of 762x39 I'll tell ya ;)

Baron - Yea I didnt like that bulky scout scopes deal. Looks goofy. Take complete place of the rear leaf. No irons. Which is completely ok with me.

Now just to take it to the range and test her out :)

Roscoe1957
09-01-2010, 12:26 PM
Recent Romanian AK pistol build. Tapco flat. Might shorten the barrel this winter.

http://i609.photobucket.com/albums/tt173/Kirk1957/AK%2047%20Pistol/AKPistol1.jpg?1283372629

http://i609.photobucket.com/albums/tt173/Kirk1957/AK%2047%20Pistol/Bottom.jpg?1283372681

http://i609.photobucket.com/albums/tt173/Kirk1957/AK%2047%20Pistol/AKPistolleftside.jpg?1283372724

mcat707
09-01-2010, 4:13 PM
I came across some of these mounts and figured it would work nice for my dracos... what do you guys think?

Looks good! I need one of those for my Lancaster AK pistol! Now spill the beans on where to get one :D!

KrazyKevy
09-02-2010, 2:21 AM
Just another 'DJ' inspired AK Pistol. Thanks for making me spend money DJ! :D

http://fototime.com/5340AD5B0FCD672/orig.jpg

Roscoe1957
09-02-2010, 2:36 PM
How well does that handguard hold up to barrel heat? Does it have a metal heat shield?

Ravenslair
09-05-2010, 12:24 PM
Just another 'DJ' inspired AK Pistol. Thanks for making me spend money DJ! :D

http://fototime.com/5340AD5B0FCD672/orig.jpg

I think this is exactly what I am going to do with my Draco.

lehn20
09-05-2010, 3:56 PM
LaRue AK mount

Roscoe1957
09-11-2010, 9:46 AM
Recent Romanian AK pistol build. Tapco flat. Might shorten the barrel this winter.

http://i609.photobucket.com/albums/tt173/Kirk1957/AK%2047%20Pistol/AKPistol1.jpg?1283372629

http://i609.photobucket.com/albums/tt173/Kirk1957/AK%2047%20Pistol/Bottom.jpg?1283372681

http://i609.photobucket.com/albums/tt173/Kirk1957/AK%2047%20Pistol/AKPistolleftside.jpg?1283372724

Fired this one this past Thursday. 150 rds. Shot great, seemed louder than my SAR-1 and one hell of a fire ball. LOL

razmataz
09-11-2010, 8:59 PM
http://www.calguns.net/calgunforum/attachment.php?attachmentid=66473&d=1282716183

I think that's pretty cool. Now, are you going to tell us where to get them? :)

I'm interested in that mount also and would like more details...who makes it and where can we get one? Looks like a better/lower profile option than the Samson mount and hopefully cheaper :)

247Nino
10-05-2010, 8:48 AM
http://img214.imageshack.us/img214/3899/img0459o.jpg

Mine is in here (http://www.calguns.net/calgunforum/showthread.php?t=325764) now.

E-120
10-05-2010, 8:57 AM
My latest pistol build.
http://i442.photobucket.com/albums/qq147/dhc-60/amd-1.jpg

C.W.M.V.
10-05-2010, 9:12 AM
I have a question, is anyone else having problems with their draco and this mag lock? I find it way too hard to remove the mag and I don't think I can do it with a bullet. mag release lever doesn't go all the way because the mag lock gets in the way, had to use the short part of an L wrench to release the mag and even then it's a bit of a hassle

I just took one of the Solar tactical BB tools and attatched it to my mags, that way I can drop the empty mag with the one thats replacing it. Works really well, as long as your BB has an elongated oval.

http://i512.photobucket.com/albums/t322/dotson_kc/IMG00018-20100928-1542.jpg

My Draco, with some cheap laminated furniture.
http://i512.photobucket.com/albums/t322/dotson_kc/IMG00014-20100928-1330.jpghttp://i512.photobucket.com/albums/t322/dotson_kc/IMG00011-20100928-1329.jpg

Chunky_lover
11-28-2010, 12:50 PM
http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/Draco/Draco%20High%20Res%20Pics/draco-1.jpg

http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/Draco/Draco%20High%20Res%20Pics/draco4-1.jpg

http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/Draco/Draco%20High%20Res%20Pics/draco2-1.jpg

http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/Draco/Draco%20High%20Res%20Pics/draco6.jpg

Deadon
11-28-2010, 8:38 PM
http://img.photobucket.com/albums/v19/tiller2nv/DSC_0732.jpg
http://img.photobucket.com/albums/v19/tiller2nv/DSC_0744.jpg
http://img.photobucket.com/albums/v19/tiller2nv/DSC_0740.jpg
http://img.photobucket.com/albums/v19/tiller2nv/DSC_0743.jpg

247Nino
12-02-2010, 9:34 AM
right here!

AMD-65 with some wood!
http://ninophotography.smugmug.com/photos/1113985671_peRFB-O.jpg

baloot-boy
12-29-2010, 10:42 PM
Here's my 2nd post on calguns. Got myself an Draco ak47 pistol and also put together an AR15 for Christmas. Great gifts for myself!

Midwest Industries 2-piece handguard
Tapco slotted muzzle brake
Hogue grip
Sling plate

http://lh6.ggpht.com/_Ad3v66em57c/TRwzoxYWxnI/AAAAAAAACQc/PygKy27cXUw/s720/101_0726.JPG

762.DEFENSE
01-02-2011, 4:29 PM
^ Very nice build, my second Draco will look pretty similar. I already have one in FDE with the same upgrades, just a Tapco slant muzzle break instead.

FiveSeven
01-10-2011, 8:37 AM
http://img.photobucket.com/albums/0803/sergey25/Guns/ak8.jpg



http://img.photobucket.com/albums/0803/sergey25/Guns/ak2.jpg

christophera
01-21-2011, 2:32 PM
What rails will fit this in the 'lower' price range? I will get the MI quad rail if it is the only one that fits, but I am looking at other options first. Thanks

247Nino
01-24-2011, 4:09 PM
Optimus Prime
http://ninophotography.smugmug.com/photos/1167065071_3pg3N-O.jpg

n2k
01-29-2011, 7:11 AM
Had to change mine up a bit thanks to the AOW thread:

http://i621.photobucket.com/albums/tt297/n2kphotos/fec7f670.jpg

wrestlingnrj
02-17-2011, 7:45 AM
After going through this thread, I think I know what I can use my tax rebate check for. :mnl:

FiveSeven
03-10-2011, 2:01 PM
Had to change mine up a bit thanks to the AOW thread:

http://i621.photobucket.com/albums/tt297/n2kphotos/fec7f670.jpg

Very nice, so you made AOW or just don't think CA DOJ believes that Magpul grip creates AOW.
I know it's not a AW since it has fixed mag.

Gio
03-10-2011, 2:08 PM
Very nice, so you made AOW or just don't think CA DOJ believes that Magpul grip creates AOW.
I know it's not a AW since it has fixed mag.

AFG = GTG

AOW would need a VFG, so he is all good.

n2k
03-10-2011, 2:21 PM
Very nice, so you made AOW or just don't think CA DOJ believes that Magpul grip creates AOW.
I know it's not a AW since it has fixed mag.

ATF AFG AOW Response (http://www.calguns.net/calgunforum/showthread.php?t=381738)

Or you go with the $200 NFA Form 1 Tax Stamp

oldrifle
03-20-2011, 12:10 PM
Just curious.. why the magazine locks on all these AK pistols? You don't need a mag lock on a pistol.

n2k
03-20-2011, 12:15 PM
Just curious.. why the magazine locks on all these AK pistols? You don't need a mag lock on a pistol.

Restrictions on semiautomatic handguns
California also classifies semiautomatic handguns with certain features as "assault weapons"
12276.1. (a) Notwithstanding Section 12276, "assault weapon" shall also mean any of the following:
(4) A semiautomatic pistol that has the capacity to accept a detachable magazine and any one of the following:
(A) A threaded barrel, capable of accepting a flash suppressor,forward handgrip, or silencer.
(B) A second handgrip.
(C) A shroud that is attached to, or partially or completely encircles, the barrel that allows the bearer
to fire the weapon without burning his or her hand, except a slide that encloses the barrel.
(D) The capacity to accept a detachable magazine at some location outside of the pistol grip.
(5) A semiautomatic pistol with a fixed magazine that has the capacity to accept more than 10 rounds.
Unlike rifles, there is no requirement for pistols to be centerfire, only semiautomatic.

n2k
03-20-2011, 12:17 PM
4(D)

Chunky_lover
03-20-2011, 12:31 PM
Just curious.. why the magazine locks on all these AK pistols? You don't need a mag lock on a pistol.


Lets just hope you dont have one with a question like that. If you ever bought one it comes with a lock and also single shot. No way around that. Any pistol with a external mag must be locked and 10rds or less

oldrifle
03-20-2011, 2:16 PM
Lets just hope you dont have one with a question like that. If you ever bought one it comes with a lock and also single shot. No way around that. Any pistol with a external mag must be locked and 10rds or less

I don't have one (yet). I'm a noob when it comes to AK/AR pistols. I get it now. Thanks!

Carsgunsandchics
03-20-2011, 2:46 PM
Optimus Prime
http://ninophotography.smugmug.com/photos/1167065071_3pg3N-O.jpg

My wife noticed the picture and asked if a 6 year old owns that, and followed it up with "it's an eyesore". Well I guess that leaves out that paint scheme for mine. Darn...:D

bigthaiboy
03-27-2011, 6:32 PM
I don't normally believe in giving names to guns, but I've named my 6" guide rod pistol, El Diablito (The Little Devil).

http://i136.photobucket.com/albums/q163/bigthaiboy/ElDiabolito.jpg

Fern
03-27-2011, 9:43 PM
Bigthaiboy, Turned out VERY nice.

emgee00
03-28-2011, 9:20 PM
Holy smokes, I think I just caught myself drooling. I was about to build or buy an AR pistol but I am heavily weighing this route first/instead. Thanks for the great pics everyone. So many options.....

veterosa
04-21-2011, 9:30 PM
Here' my Bulgarian 7.62 Krink pistol built by Mario from POHF.

http://i1137.photobucket.com/albums/n504/veterosa/1303450086.jpg

1forall
04-21-2011, 11:08 PM
Not a good picture but here you go...http://i729.photobucket.com/albums/ww296/jmeezy_photos/c69c13d1.jpg

RookieShooter
04-22-2011, 8:51 AM
It would be nice if we can have this drum mag for the Draco. Wishful thinking... :68:

http://l.yimg.com/a/p/us/news/editorial/5/79/5791fb7d91aa0407fb732a945613749e.jpeg

Ub3rD0rk
04-22-2011, 1:32 PM
This is my very first build!!! Building this pistol as my first AK project has made a "standard" build seem like a walk in the park. It really isn't practical at all but it is fun to shoot
http://i1201.photobucket.com/albums/bb350/Ub3rd0rk/IMG_0419.jpg

Swift Justice
04-22-2011, 2:11 PM
What is the barrel length of that wee beastie?

C.W.M.V.
04-22-2011, 2:19 PM
Wow. most of us have carbines without buttocks and call them pistols, but that black beauty is a true pistol!
Ill give ya two bits for it:D

xxxx
04-27-2011, 12:25 PM
This is my very first build!!! Building this pistol as my first AK project has made a "standard" build seem like a walk in the park. It really isn't practical at all but it is fun to shoot
http://i1201.photobucket.com/albums/bb350/Ub3rd0rk/IMG_0419.jpg

Wow - that looks more like a MAC than an AK! Can you post some more photos? I think that might be the smallest AK I have ever seen!

joefrank64k
04-27-2011, 12:34 PM
This is my very first build!!! Building this pistol as my first AK project has made a "standard" build seem like a walk in the park. It really isn't practical at all but it is fun to shoot
http://i1201.photobucket.com/albums/bb350/Ub3rd0rk/IMG_0419.jpg

That is one mean-looking AK pistol! :D

What's the barrel length?

And how's the muzzle-flash? :D

FiveSeven
05-24-2011, 7:43 PM
My updated Draco...
With all the stuff, Trijicon RX30 itself probably weight as much as everything else combined -FH.


http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1ak0.jpg


Surefire G2 with 200lm green LED (mix of 2 surefire's)
Gear Sector mounts.
http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1ak4.jpg

LaserMax (http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1ak99.jpg) with two sling mounts on each side. The first one has lower part cut out, laser has plenty of room for adjustments. Made from lightweight aluminum so there's no weight added.
http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1ak8.jpg

Muzzle FH (http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1ak7.jpg) is U.S made and a copy from Bulgarian type.

Chunky_lover
05-24-2011, 7:54 PM
So who is getting the new draco

http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/Draco/dracoandminidraco.jpg


http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/Draco/2011-04-26_18-41-08_670.jpg

Rocket Man
05-24-2011, 8:35 PM
Made a new carring case for my Draco, an old DeWalt tool box, I figure of all the nice tools I have to get stolen the DeWalt tool box will be left behind hahhaha. :rolleyes:

http://i655.photobucket.com/albums/uu274/TheDParis/caseddraco.jpg

now in "negative" :43:

http://i655.photobucket.com/albums/uu274/TheDParis/negativedraco.jpg :cool:

Hoag grip, MI, Burris red dot, sling plate.

Rocket Man
05-24-2011, 8:42 PM
AFG = GTG

AOW would need a VFG, so he is all good.

Gio,
Really? AFG is good to go? Is it just baised on that one letter to a private person or have they said more?

RustyMacHine
05-24-2011, 9:26 PM
My updated Draco...
With all the stuff, Trijicon RX30 itself probably weight as much as everything else combined -FH.
http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1k0.jpg



I thought I was crazy for installing a TWS on mine. Now, this is crazy.:eek:

FiveSeven
05-24-2011, 9:51 PM
I thought I was crazy for installing a TWS on mine. Now, this is crazy.:eek:

What sight do you use on yours.

IMO, the bigger the objective the better when it comes to something without a stock. It's much easier to pick up dot on a larger display.

Edit: Never mind, just found it....... Not bad looking, much better IMO than crappy original wooden stock.
Using iron sight on AK pistol (without stock) suck, even when using a sling on a side. No fast follow up shot can be done accurately.
Red dot/reflex sight is a must have. Otherwise it's just point blank spray and pray flame thrower (without good FH).

Edit: What it looks like with the light/laser on.
Poor photos I know.
Had to dim/adjust aperture otherwise pics would have been to bright.

Front/Angle view.
http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1ak11.jpg

Reflex only. It does pick up fairly easy even in a bright light and it is brighter then what the photo shows.
http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1k7.jpghttp://img.photobucket.com/albums/0803/sergey25/Guns2/Image3k8.jpg

Laser (adjusted over reticle for close range). Will make final adjustments at 35 yd or so.
http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1ak12.jpg


Very happy overall with it. Very lightweight, comfortable and super easy to place it on target.
I actually prefer it to full size AK.
http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1ak9.jpg

mean403
05-25-2011, 11:22 AM
Anyone know if there will be a cali version of the new mini draco? And if so who would have them in stock?

Chunky_lover
05-25-2011, 11:36 AM
whats the cail version
single shot and mag lock?
or is there another thing that needs to be done because it takes no more effort to do the above at any cali gun shop then they do for the normal size draco
all I see is none ever in stock and probably even more money then they already go for.

RustyMacHine
05-25-2011, 12:29 PM
What sight do you use on yours.

IMO, the bigger the objective the better when it comes to something without a stock. It's much easier to pick up dot on a larger display.

Edit: Never mind, just found it....... Not bad looking, much better IMO than crappy original wooden stock.
Using iron sight on AK pistol (without stock) suck, even when using a sling on a side. No fast follow up shot can be done accurately.
Red dot/reflex sight is a must have. Otherwise it's just point blank spray and pray flame thrower (without good FH).

Reflex only. It does pick up fairly easy even in a bright light and it is brighter then what the photo shows.
http://img.photobucket.com/albums/0803/sergey25/Guns2/Image1k7.jpg

I love this photo. I actually put that on mine so my girlfriend can fondle it while I refinished the wood.
I ordered an EKP-1S-03 in weaver but Eastwave couldn't come through so I ended up with a side mount that came last Saturday.
Well, since they dont have sidemounts I took that all off and installed a Bulgarian lower hand guard... So she won't have a choice but to fondle the wood. ;)

Yours looks bad*ss x 10, though.:cool2:


.

FiveSeven
07-09-2011, 11:09 PM
Updated:
C-more railway instead of RX30 and changed a few other things including FH. Little bit lighter now as well.

http://img.photobucket.com/albums/0803/sergey25/Guns2/ak2a12.jpg

http://img.photobucket.com/albums/0803/sergey25/Guns2/ak2d4.jpg

http://img.photobucket.com/albums/0803/sergey25/Guns2/ak211-1.jpg



AK pistol (6) (http://img.photobucket.com/albums/0803/sergey25/Guns2/ak2a.jpg)

247Nino
07-09-2011, 11:12 PM
Updated:
C-more railway instead of RX30 and changed a few other things including FH. Little bit lighter now as well.



THAT'S ONE ****IN NICE GUN!

0351USMC
01-04-2012, 3:28 PM
My Draco :D:D
http://www.calguns.net/calgunforum/attachment.php?attachmentid=128995&stc=1&d=1325723280

My375hp302
01-10-2012, 8:28 PM
Just finished my latest build...

http://www.calguns.net/calgunforum/attachment.php?attachmentid=129890&stc=1&d=1326259672

RLTW
01-14-2012, 9:56 PM
Recent Romanian AK pistol build. Tapco flat. Might shorten the barrel this winter.

http://i609.photobucket.com/albums/tt173/Kirk1957/AK%2047%20Pistol/AKPistol1.jpg?1283372629

http://i609.photobucket.com/albums/tt173/Kirk1957/AK%2047%20Pistol/Bottom.jpg?1283372681

http://i609.photobucket.com/albums/tt173/Kirk1957/AK%2047%20Pistol/AKPistolleftside.jpg?1283372724

That's Sweet!!! Great Build:o

JeffyD
01-19-2012, 1:24 PM
Well, isn't this just a delightful situation that you fine folk have thrown me into? I've always been in love with AKs, but, being a Californian, I have always been too discouraged to try owning one due to the many complications that seem to arise with obtaining one... ( Poor quality of goods on the market, or outright lies, or being told it can't be arranged, gimped products, etc., etc.)

But after lurking around these forums for a few months, looking at all the pretty pictures, I've been swept up in the crazy idea that, not only is it possible to follow in your footsteps and build one of these contraptions, but that I simply need to. Manifest destiny, and whatnot. Compulsion has taken a mile after being offered a momentary inch, so to speak, and now there is no other choice for me to act upon.

I've got what seems to be an entire Summer's worth of reading to do in order to learn as much as seem responsible before I start tackling this task, and shelling out the cash to do so. My bookmark bar is congested with a bunch of new build-centric reminders and to-dos.

To be honest, though... Even though I know what likely is a semester's worth of information more than I did a couple of nights ago, concerning this topic at least, I still feel like this endeavor is extremely overwhelming, tricky, and complicated. So many hurdles to get past before one even needs to attend some build party. Hopefully, this turns out to be good time, ha.

Anyway, I'm going to try my hand at an AMD 65 kit once I've gotten the requisite duckies in a row... Wish me luck. And thank you for posting pictures of all this cool crap, and for all of the dangerous inspiration such has caused.

Nicoman
01-23-2012, 3:36 PM
AMD-65

http://i41.tinypic.com/25kn5g4.jpg

drdan01
01-28-2012, 1:11 PM
Finally, some pics and info to add to this thread!

Just got this one home last night and went to town on it. I don't have the means to drill out the rear trunnion for a sling attachment, so I made mine up with some black webbing I had laying around. It will work for now.

Draco AK pistol
Hogue FDE AK grip
Midwest Industries FDE handguard
Troy single-point sling on my own, made-up, nylon webbing sling mount
Tapco slotted muzzle brake

Enjoy!

http://www.slice.net/draco/03.JPG

http://www.slice.net/draco/02.JPG

http://www.slice.net/draco/01.JPG

http://www.slice.net/draco/05.JPG

http://www.slice.net/draco/04.JPG



A little late to the "party" but I found your post as I was doing my own research. Thanks to your inspiration I've got mine on its way and I'm all set to get the same setup that you have. Truly a great looking gun and I'm looking forward to it!

Nicoman
03-05-2012, 11:12 PM
http://img707.imageshack.us/img707/3887/201202182254521.jpg (http://imageshack.us/photo/my-images/707/201202182254521.jpg/)

zfields
03-05-2012, 11:36 PM
https://lh4.googleusercontent.com/-pAcp4lwnbWI/T0LbfOTh-pI/AAAAAAAABXU/_Z0P8p3Gj4s/s800/DSC00886.JPG

858casper858
03-06-2012, 8:03 PM
Romy parts kit from pat (restoreit), trunnion marked 1979...my birthday gun!

http://i920.photobucket.com/albums/ad44/858casper858/2101c5d0.jpg

temecula
03-12-2012, 8:09 PM
Nice . I need to buy one in this month

mmrx2
03-22-2012, 1:45 PM
Nice . I need to buy one in this month

me too, but it seems they stopped importing them.

ZX-10R
04-16-2012, 5:20 PM
http://i208.photobucket.com/albums/bb85/mosepeda2000/20120415_0856221.jpg
http://i208.photobucket.com/albums/bb85/mosepeda2000/20120415_085309.jpg
http://i208.photobucket.com/albums/bb85/mosepeda2000/20120415_0852542.jpg
http://i208.photobucket.com/albums/bb85/mosepeda2000/20120415_084850.jpg

RookieShooter
04-16-2012, 5:34 PM
My 1st prize award goes to this one. So freaking cool gun !!!

http://img.photobucket.com/albums/0803/sergey25/Guns2/ak2a12.jpg

Gruber51
04-17-2012, 9:56 PM
My 1st prize award goes to this one. So freaking cool gun !!!

http://img.photobucket.com/albums/0803/sergey25/Guns2/ak2a12.jpg

How do you like that cmore red dot?

FiveSeven
04-18-2012, 9:36 PM
My 1st prize award goes to this one. So freaking cool gun !!!

Thanks but It had a "makeover" and now it's better.
V
http://img.photobucket.com/albums/0803/sergey25/Guns4/d2.jpg

http://img.photobucket.com/albums/0803/sergey25/Guns4/d7.jpg

http://img.photobucket.com/albums/0803/sergey25/Guns4/d5a.jpg

http://img.photobucket.com/albums/0803/sergey25/Guns4/D1.jpg



Gruber51: Sold that green Cmore red dot but it was pretty good optic, worth owning imo. If it was aluminum version I probably would have kept it.

osis32
05-09-2012, 10:17 PM
http://i48.tinypic.com/nvqgcy.jpg


raithios homebuild with assist from 2 cgers

Trendkill
05-12-2012, 7:10 AM
http://i39.photobucket.com/albums/e181/necritan/AKme.jpg

AK all day
05-24-2012, 5:38 PM
How do you make a legal AK-pistol? Could you just rip the stock off of a Regular fixed stock AK? Do you register it? Or??

djleisure
05-25-2012, 12:52 PM
How do you make a legal AK-pistol? Could you just rip the stock off of a Regular fixed stock AK? Do you register it? Or??
You either need to buy one as a complete AK pistol or build one from scratch as a complete pistol. It can never have had a stock attached to it, otherwise it's an SBR. No you can't just rip the stock off an AK rifle and call it a pistol. ;)

PICTURE THREAD!
http://i1006.photobucket.com/albums/af189/dj_leisure/IMG_8387.jpg

timdps
05-31-2012, 7:16 PM
Bullpupped Draco (with 10/30 mag)

Build thread is here:
http://www.calguns.net/calgunforum/showthread.php?t=428306

http://i16.photobucket.com/albums/b44/timdps/Draco/DSCN5998.jpg

timdps
06-07-2012, 8:54 PM
Do did I scare everyone off? :43:



http://i16.photobucket.com/albums/b44/timdps/Draco/DSCN5998.jpg

straykiller
06-09-2012, 8:35 PM
psl pistola

http://i1031.photobucket.com/albums/y372/straykiller/IMG_1006.jpg

Carsgunsandchics
06-09-2012, 8:47 PM
psl pistola

http://i1031.photobucket.com/albums/y372/straykiller/IMG_1006.jpg

Did you have to enlarge the gas port size to work with the short barrel?

straykiller
06-09-2012, 8:50 PM
Did you have to enlarge the gas port size to work with the short barrel?

nope, it worked perfectly with the original gas port hole size so i left it alone.

Carsgunsandchics
06-09-2012, 8:52 PM
cool

timdps
06-10-2012, 10:40 PM
psl pistola


That's one way to up the ante! Very cool.

So now I'm going to have build a bullpup PSL pistol? :D

tim

dat1callidude
06-13-2012, 12:47 PM
http://img808.imageshack.us/img808/589/img0196h.jpg (http://imageshack.us/photo/my-images/808/img0196h.jpg/)


PAINTED! 1/2 WAY AT LEAST....STILL SOME WORK TO BE DONE ON THIS PUPPY

http://img225.imageshack.us/img225/8044/img0208lj.jpg (http://imageshack.us/photo/my-images/225/img0208lj.jpg/)

Steve2648
06-13-2012, 12:59 PM
Those are pretty awesome

dunwitjayz
06-19-2012, 12:16 PM
http://i1166.photobucket.com/albums/q606/dunwitjayz/Snapbucket/8C94044D.jpg

My baby that blew up on me ! Via Valkyrie arms melpitas !!! Dam I wish she would have lived a longer life

Carsgunsandchics
06-19-2012, 4:17 PM
http://i1166.photobucket.com/albums/q606/dunwitjayz/Snapbucket/8C94044D.jpg

My baby that blew up on me ! Via Valkyrie arms melpitas !!! Dam I wish she would have lived a longer life

Whadya do to it? Fixable or parting it out?

ramathorn
06-19-2012, 7:06 PM
Ok... quick rant! I don't think AK pistols are practical. Yes they're smaller than full size AK's but they can't be nearly as accurate with the short barrel and no stock. Sure they're more concealable than the full size rifle but not nearly as concealable as a standard pistol. Alright you figure they'll be banned eventually, i get that, get em while you can. So really - besides the cool factor, whats the point?

Disclaimer: I must confess - while i don't see any practical purpose of it in pistol form i do still kinda want to build one, although i'm not totally sure why... feel free to let me know why i think they're dumb yet still want to have one of my very own to love and shoot. Just crazy? :wacko:

Carsgunsandchics
06-19-2012, 7:29 PM
The mags from my rifle fit my pistol. The ammo for my rifle fits my pistol. A majority of my spare parts for my rifle fit my pistol. Shooting steel out to 200+ yards with my rifle is fun. Shooting steel out to 200+ with my pistol is funner. The fireball from my pistol is fun regardless of the excess noise. But I'm shooting so who cares about the noise.

ramathorn
06-19-2012, 8:11 PM
The mags from my rifle fit my pistol. The ammo for my rifle fits my pistol. A majority of my spare parts for my rifle fit my pistol. Shooting steel out to 200+ yards with my rifle is fun. Shooting steel out to 200+ with my pistol is funner. The fireball from my pistol is fun regardless of the excess noise. But I'm shooting so who cares about the noise.

The AK pistol accurate out to 200 yards?

Carsgunsandchics
06-19-2012, 8:15 PM
The AK pistol accurate out to 200 yards?

16 inch plate.

Barabas
06-20-2012, 9:59 AM
My baby that blew up on me ! Via Valkyrie arms melpitas !!! Dam I wish she would have lived a longer life

It blew up on you? Do you have any after pictures? I'm curious about the mode of failure considering I see one issue that would make firing your pistol unsafe in the configuration shown in your photo.

Did you put the handguards on it yourself?

Stunnason
06-20-2012, 12:32 PM
Ok... quick rant! I don't think AK pistols are practical. Yes they're smaller than full size AK's but they can't be nearly as accurate with the short barrel and no stock. Sure they're more concealable than the full size rifle but not nearly as concealable as a standard pistol. Alright you figure they'll be banned eventually, i get that, get em while you can. So really - besides the cool factor, whats the point?

Disclaimer: I must confess - while i don't see any practical purpose of it in pistol form i do still kinda want to build one, although i'm not totally sure why... feel free to let me know why i think they're dumb yet still want to have one of my very own to love and shoot. Just crazy? :wacko:

Do you think 200 + mph sport bikes and cars are practical? I think if everything man has made was all about "practical" then we would have a boring life. You want to build one because you know its cool as hell to look at and shoot. It might not be pin point accurate out to 200 yards, but I'm sure it will still hit a man size target and destroy his innerds, but thats not what guns are made for, haha.

ramathorn
06-20-2012, 9:23 PM
Do you think 200 + mph sport bikes and cars are practical? I think if everything man has made was all about "practical" then we would have a boring life. You want to build one because you know its cool as hell to look at and shoot. It might not be pin point accurate out to 200 yards, but I'm sure it will still hit a man size target and destroy his innerds, but thats not what guns are made for, haha.

True enough. :D

FiveSeven
06-21-2012, 6:31 AM
Ok... quick rant! I don't think AK pistols are practical.
Your opinion only and nonfactual. Rant invalid.

Yes they're smaller than full size AK's but they can't be nearly as accurate with the short barrel and no stock.
Actually they can be more accurate then full size AK due to shorter barrel. (maybe less barrel flex/whip).

Using sling in opposite tension method it's just as stable as stock. It's all about how or what you know.


Sure they're more concealable than the full size rifle but not nearly as concealable as a standard pistol.
No standard pistol can give you the firepower of 7.62x39, not even .50AE and no traditional AK can be concealed as good especially inside a vehicle or other cramped spaces. There's a reason for PDW type weapons existence, a role that standard pistols can not fill. AK/AR pistol does that very well.

Alright you figure they'll be banned eventually, i get that, get em while you can. So really - besides the cool factor, whats the point?
The point is explained and NO, I don't think they'll be banned eventually and if they do, so will be regular AR's and AK's.

dunwitjayz
06-21-2012, 9:39 AM
http://i1166.photobucket.com/albums/q606/dunwitjayz/Snapbucket/A6A30AED.jpg

dat1callidude
07-06-2012, 12:51 AM
http://img220.imageshack.us/img220/2995/25865.jpg (http://imageshack.us/photo/my-images/220/25865.jpg/)


FINISHED!!!!

boamedt
07-11-2012, 8:12 AM
heres my amd 65 pistol in its various guises
original build:
http://img84.imageshack.us/img84/2237/20120417171630512.jpg
cheap rail forend and tasco red dot
http://img535.imageshack.us/img535/6673/20120424165048620.jpg
Midwest industries extended handgaurd:
http://img403.imageshack.us/img403/6334/akfrontonchair.jpg
http://img832.imageshack.us/img832/233/akcoolgroundpic.jpg
then for some reason i really like how the saiga sporter forends look with the pistol grip conversion rifles...so i thought it should look good on the pistol...
http://img717.imageshack.us/img717/9007/20120711085810287.jpg
http://img266.imageshack.us/img266/8066/20120711085909476.jpg

Gruber51
08-07-2012, 9:51 PM
http://www.hunt101.com/data/500/medium/P10100329.JPG

http://www.hunt101.com/data/500/medium/P10100338.JPG

TML
08-21-2012, 11:49 PM
Figure I'll post mine up here. Thanks EBR Works, it has been a lot of fun so far.

http://cl.ly/image/1o2n0t0b0g1n/Screen%20Shot%202012-08-22%20at%2012.48.14%20AM.png

kalbos
10-24-2012, 12:04 PM
Ak based 45 acp.
http://i81.photobucket.com/albums/j208/boswan/IMAG0465.jpg
Still working out feed issues

Chickwithguns
10-24-2012, 9:40 PM
175975

Here's me and a few of my guns. Seeing as how this is an AK forum, clearly its the one on the right. :) Pretty decent Christmas card.

TML
10-25-2012, 8:18 AM
175975

Here's me and a few of my guns. Seeing as how this is an AK forum, clearly its the one on the right. :) Pretty decent Christmas card.

awesome!

sffred
12-18-2012, 11:31 PM
My yugo m92 pistol (no its not a pap, it is built with an akm flat with a zero round sled mag first!)
http://i947.photobucket.com/albums/ad311/sffred/Snapbucket/CB7D132C-orig.jpg
Then with a 10/30
http://i947.photobucket.com/albums/ad311/sffred/Snapbucket/971ADDCC-orig.jpg

KelchUSMC
01-03-2013, 11:22 AM
Yugo M92 I just picked up recently... didn't like rails and grip.

http://i578.photobucket.com/albums/ss229/kelchusmc/DSCN3499_zps6189c95a.jpg

Put MAKO grip on

http://i578.photobucket.com/albums/ss229/kelchusmc/AK47_zpse4e4079d.jpg

http://i578.photobucket.com/albums/ss229/kelchusmc/DSCN3452_zps7e11158b.jpg

Need MI rails... whenever those get in stock. Might make it an SBR if I ever get around to filing the paperwork.

Chunky_lover
01-03-2013, 11:26 AM
you can do sbr in san diego?
or you in another state, as I dont see any mag locks either

Chunky_lover
01-03-2013, 11:32 AM
Ok... quick rant! I don't think AK pistols are practical. Yes they're smaller than full size AK's but they can't be nearly as accurate with the short barrel and no stock. Sure they're more concealable than the full size rifle but not nearly as concealable as a standard pistol. Alright you figure they'll be banned eventually, i get that, get em while you can. So really - besides the cool factor, whats the point?

Disclaimer: I must confess - while i don't see any practical purpose of it in pistol form i do still kinda want to build one, although i'm not totally sure why... feel free to let me know why i think they're dumb yet still want to have one of my very own to love and shoot. Just crazy? :wacko:



This is 50 yards rapid fire standing up with a draco
although it has tritium front sight which is so wide it totally blocked this target I think its pretty accurate for firing fast and standing up

I believe it was 20 rounds, all red circles is the bullet hit
think its one of those 8 inch circle targets

http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/16.jpg

zfields
01-03-2013, 11:34 AM
Couldnt hang with the pistol anymore.

Working on forming a trust to SBR this sucker.

https://lh4.googleusercontent.com/-lrlc5yeKnpM/UFzZ6MYXx3I/AAAAAAAAB6o/gCIk27FUngI/s1024/DSC01041.jpg

KelchUSMC
01-03-2013, 12:03 PM
you can do sbr in san diego?
or you in another state, as I dont see any mag locks either

Ooops, added it to my handgun post but not here. I'm originally from Missouri where all this is legal.. just stationed out here.

Chunky_lover
01-03-2013, 12:05 PM
Ooops, added it to my handgun post but not here. I'm originally from Missouri where all this is legal.. just stationed out here.


ahh
okay makes sense now

ive seen quite a few non CA'ers on this site


I thought maybe you had the morepoop4you mag lock
I try to use that for photos

KelchUSMC
01-04-2013, 6:57 PM
ahh
okay makes sense now

ive seen quite a few non CA'ers on this site


I thought maybe you had the morepoop4you mag lock
I try to use that for photos

Hahaha, wasn't sure if you were messing with me or not... had to look that up (morepoop4you).

Not born/raised here in Cali, but I've been stationed here far too long. I typically keep my 1911's around and that's about it. Anything else that would be CA neutered stays in Missouri.

Oh, Straightline Tactical had a Yugo Zastava around 800 bucks yesterday. I thought it was a good deal and worth mentioning to anyone interested. MI rails still out of stock :/

Chunky_lover
01-04-2013, 7:52 PM
yugo for $800
I remember few years ago they were around $600 I think

I guess anything in stock is a good deal now

KelchUSMC
01-04-2013, 8:17 PM
yugo for $800
I remember few years ago they were around $600 I think

I guess anything in stock is a good deal now

That's what he said. I said 800 was a good price and he told me that like THREE WEEKS ago they were around 600. Don't really want to think about that considering what I paid :D But, all in all I'm satisfied.

theicecreamdan
01-06-2013, 4:47 PM
http://farm9.staticflickr.com/8076/8341054720_e4d657571c_c.jpg

dat1callidude
01-06-2013, 8:24 PM
very nice ice cream dan.

dvs762
01-28-2013, 9:53 PM
Heres my Draco. Solar Tactical MFer, mag lock and selector safety tab. 10/30 mag. Added a side rail from Collectors Source DFW. PK01V red dot. Polish Beryl lower handguard, Polish AKM upper handguard. Galil pistol grip.I opened the hooded front sight to a more standard AKM type sight. CNC Warrior Bulgarian style A2 flash hider with adapter.



no idea what happened..seems photobucket deleted my pics...gone from my album...WTF???

Atlantaboi2012
01-28-2013, 10:26 PM
so, i'm looking to get an ak pistol.

1) can someone give me a quick run through on what the difference between a krinkov, draco, and other ak pistols are?
2) is installing a rear sling swivel as easy as drill and tapping or is there a whole other piece that needs to be installed?
3) i read you guys talking about a trinnion... what is that?

thanks for any info you can provide!


Yeah, they all become safe queens because once you take them to the range 1x you realize being limited to 10 rd mags in such a weapon steals away all the potential fun. Had mine almost 2 years and its only been out once....the day after I got it. I like the all black Yugo AK Pap pistol I saw out of state at the gun show... An AK or AR pistol is a must have in a collection if you have the money.

dvs762
01-29-2013, 10:15 AM
I treat mine like any other Mag lock firearm. I target shoot with it and when I leave the state I use it how intended.

luckystrike
03-04-2013, 12:35 AM
Milled Receiver Bulgy, apeture or notch rear sight, galil-style thumb safety, firing pin is not floating
http://i1261.photobucket.com/albums/ii587/mike76251/photo7_zps41d23d82.jpg

lakersandguns
03-14-2013, 10:32 AM
Pictures of my old mini Draco
http://www.calguns.net/calgunforum/attachment.php?attachmentid=214668&stc=1&d=1363285895
http://www.calguns.net/calgunforum/attachment.php?attachmentid=214668&stc=1&d=1363554328

Prostking
03-20-2013, 12:29 PM
I would love to build one! Any ideas on how to "justify" the build to my wife?!:ban:

doug5551
11-13-2013, 9:23 PM
Bump...

Anyone have any AK pistols to add to this photo thread?

Thanks!

evidens83
12-14-2013, 7:19 AM
My first AK, Draco 7.62 Future plans based off the infamous DJLeisure build :D

http://i75.photobucket.com/albums/i307/evalencia83/Mobile%20Uploads/2013-12-14002156_zps3e0b42b0.png (http://s75.photobucket.com/user/evalencia83/media/Mobile%20Uploads/2013-12-14002156_zps3e0b42b0.png.html)

doug5551
12-18-2013, 4:41 PM
Great pic of the draco. Thanks for posting it.

Nicoman
01-18-2014, 7:15 PM
My new M92 pap my wife got me for my birthday, haven't shot it yet but I did refinish the wood last night

EDIT FOR A BETTER PICTURE
http://i.imgur.com/ig5bbU6.jpg

zfields
01-19-2014, 9:04 PM
http://img.tapatalk.com/d/14/01/20/6a3y6ahy.jpg

sent from my damn tappy device...

FrankV
03-01-2014, 9:50 PM
Just got some accessories for my PAP.


http://i129.photobucket.com/albums/p232/fvidaure/image_zps4cf3754f.jpg (http://s129.photobucket.com/user/fvidaure/media/image_zps4cf3754f.jpg.html)

http://i129.photobucket.com/albums/p232/fvidaure/image_zpsa06c6d7f.jpg (http://s129.photobucket.com/user/fvidaure/media/image_zpsa06c6d7f.jpg.html)
http://i129.photobucket.com/albums/p232/fvidaure/image_zps508f098a.jpg (http://s129.photobucket.com/user/fvidaure/media/image_zps508f098a.jpg.html)

SURVIVOR619
03-02-2014, 12:10 PM
M92

http://img.tapatalk.com/d/14/03/03/use3amev.jpg

phase1
03-02-2014, 1:01 PM
Just got some accessories for my PAP.


did you make that adapter for the tube or can i buy that somewhere?

FrankV
03-02-2014, 2:17 PM
did you make that adapter for the tube or can i buy that somewhere?



http://www.usmachinegun.com/proddetail.php?prod=PAP-SAAR

Nicoman
03-02-2014, 2:18 PM
did you make that adapter for the tube or can i buy that somewhere?

http://www.usmachinegun.com/proddetail.php?prod=PAP-SAAR

bajadan
03-02-2014, 2:20 PM
did you make that adapter for the tube or can i buy that somewhere?

There has been some discussion about adding a tube or Sig brace to a AKpistol. Better read up on it first.

bajadan
03-02-2014, 5:49 PM
Ok will do. Seem to me it would just be adding a cheek rest


yeah, unlike ARPistol needs a buffer tube for operation. The AkPistol platform does not. CA might consider it SBR since its been modified.

-- http://www.calguns.net/calgunforum/showthread.php?t=756157

Nicoman
03-14-2014, 11:06 AM
redid the wood, much happier with the outcome this time.

http://i60.tinypic.com/t8nn82.jpg

SNCaliber
03-14-2014, 1:49 PM
I just picked up a Draco, setting it free on Sunday, for the guys with the MI quad rails, do they get hot when firing a lot since its a metal rail? I'm debating whether to try a Combloc finish or go metal rail.

Nicoman
03-14-2014, 2:55 PM
I just picked up a Draco, setting it free on Sunday, for the guys with the MI quad rails, do they get hot when firing a lot since its a metal rail? I'm debating whether to try a Combloc finish or go metal rail.

Any handguard will get hot with enough rounds, when i had my AMD-65 pistol the rail would get hot after 2 magazines

geoint
03-19-2014, 2:43 PM
If Im moving into the state with a M92 pistol I already own, I understand I have to SSE it to make it CA legal. I know in the past it was legal after taking possession to switch it back to semi auto.


Would I be able to prove my M92 was SSE'd and that I modified it back? And if so, how would I do that? Just keeping my receipt from my ffl that SSE'd it?

Is this even still legal? I know it used to be but I dont see current threads about legality of SSE for pistols with the magazine well outside of the pistol grip.

zfields
03-19-2014, 3:24 PM
If Im moving into the state with a M92 pistol I already own, I understand I have to SSE it to make it CA legal. I know in the past it was legal after taking possession to switch it back to semi auto.


Would I be able to prove my M92 was SSE'd and that I modified it back? And if so, how would I do that? Just keeping my receipt from my ffl that SSE'd it?

Is this even still legal? I know it used to be but I dont see current threads about legality of SSE for pistols with the magazine well outside of the pistol grip.

You don't need to sse it. Just make it compliant with a mag lock and 10 round mags.

Sse only is invoked for transfers.

sent from my damn tappy device...

Jrubbadubbub
03-23-2014, 2:51 PM
My pap m92. Cnc warrior 4 piece muzzle brake,detent,and sling adapter. Cheapo sling. Rapidfiretek scope mount and a leatherwood / hi-lux tac dot. Waiting for a hogue grip and MI forend



second pic is with stained handguards and hogue grip.



Third pic is with midwest handguard and magpul afg

SNCaliber
04-07-2014, 2:23 PM
Just got my Draco handguards back in from refinishing to a Russian Red laminate finish. Century Arms Draco pistol with Samson rail, Vortex Strikefire, Hogue Grip, ambi sling plate, Solar Tactical bullet button, Specter MOUT sling

http://img.photobucket.com/albums/v214/cbkstreet/IMG_20140405_214456_zpssj0mzmqk.jpg

http://img.photobucket.com/albums/v214/cbkstreet/20140405_184750_1_zpspw8uwpat.jpg

http://img.photobucket.com/albums/v214/cbkstreet/20140405_184713_1_zpsnhu25voq.jpg

Nicoman
04-07-2014, 3:30 PM
^^^ do you get a lot of fire out of the muzzle with that brake?

Germz
05-09-2014, 9:52 AM
http://i61.tinypic.com/357r9xt.jpg

http://i62.tinypic.com/hve8vs.jpg

http://i58.tinypic.com/30vhvft.jpg

I love it!

Sent from my SCH-I545 using Tapatalk

0150r
06-11-2014, 4:09 PM
My new Zastava M92 PAP. Picked it up on sale for $409 and came with a $25 gift card and a $50 Remington range bag/cleaning kit. The SB47 was added for $155.

$409 + $31 background check/taxes + $155 SB47 brace - $25 gift card = $570 total. Pretty happy about that.

http://www.calguns.net/calgunforum/attachment.php?attachmentid=332351&stc=1&d=1402531737

SNCaliber
06-16-2014, 7:19 AM
^^^ do you get a lot of fire out of the muzzle with that brake?

you could say that... draco pistol with Tapco AK-74 style brake causes fireballs of glory!

http://img.photobucket.com/albums/v214/cbkstreet/10406575_10103196231912433_1046666993247823674_n_z ps3a033f0d.jpg

bigpig1
06-29-2014, 11:09 AM
My new Zastava M92 PAP. Picked it up on sale for $409 and came with a $25 gift card and a $50 Remington range bag/cleaning kit. The SB47 was added for $155.

$409 + $31 background check/taxes + $155 SB47 brace - $25 gift card = $570 total. Pretty happy about that.

http://www.calguns.net/calgunforum/attachment.php?attachmentid=332351&stc=1&d=1402531737

Very Cool! Where did you get it for that price?

bokehshooter
08-26-2014, 7:08 AM
Picked up my M92 yesterday! Already had all my accessories waiting when I got home!

BEFORE
http://www.jerelfuerte.com/photos/i-j88Zzjk/0/L/i-j88Zzjk-L.jpg

AFTER
http://www.jerelfuerte.com/photos/i-RMvxb72/0/L/i-RMvxb72-L.jpg

Deadon
08-26-2014, 11:00 AM
I dont have a pic of just the one right now.
http://img.photobucket.com/albums/v19/tiller2nv/20140823_094807.jpg (http://smg.photobucket.com/user/tiller2nv/media/20140823_094807.jpg.html)

prmay
09-04-2014, 2:15 PM
I've been trying to trade my Mini 14 for one. No luck so far.

andy standard
09-06-2014, 9:29 PM
http://tapatalk.imageshack.com/v2/14/09/06/c1371e03299978f01a92ef2c8454df73.jpg

Here's my mini draco. Finally got my 10/20 tapco mags in so hopefully I get to take it out to the range soon!


Sent from my iPhone using Tapatalk

SimonBirch
09-29-2014, 11:56 PM
Can't wait to get my mini draco. Gonna stain that handguard though. It sure us uuuuuuuglyyy

SimonBirch
09-30-2014, 12:00 AM
So who is getting the new draco

http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/Draco/dracoandminidraco.jpg


http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/Draco/2011-04-26_18-41-08_670.jpg


I am. Just put mine on layaway on atlantic last week. Can't wait. Gonna pay it off soon. Not in a hurry since I can't dros another pistol for about 20 something days

dvs762
09-30-2014, 10:27 PM
so I guess the arm brace thingy is all good then....

IEatZ28
09-30-2014, 10:51 PM
Here's my c39 micro: http://tapatalk.imageshack.com/v2/14/09/30/d005da6b3876dec1caac3aac0c5c0500.jpghttp://tapatalk.imageshack.com/v2/14/09/30/9030cab17bb71db265fbd9f561141873.jpg


-Nick

Atlantic Firearms
10-01-2014, 3:35 AM
We have a few of the AK47 Pistol NANO coming for testing


http://www.royaltigerimports.com/v/vspfiles/photos/IONANO5001-2.jpg

andy standard
10-02-2014, 9:27 AM
Took my mini out twice since I posted and it is FTF like no other. Not sure if it's the mag or I have to break it in more but EVERY shot the BC gets stuck on the way back before even chambering the round or on the way forward and the BC never fully seats itself without manually pushing it forward. Any ideas what it could be?


Sent from my iPhone using Tapatalk

Jerry X
10-03-2014, 8:42 PM
http://i1175.photobucket.com/albums/r626/pao_xiong_69/1_small_zps61073d98.jpg

Jerry X
10-03-2014, 8:42 PM
...

noahinla
10-13-2014, 9:27 PM
just DROSd a mini draco

tried to order a sb47 brace from budsgunshop.com, but got an email the next day saying they aren't shipping the sb47 to California. Lame!

http://img.tapatalk.com/d/14/10/14/dema6yvy.jpg

Grandmasterlooney
10-16-2014, 3:18 PM
They aren't shipping the sb47 to California?
There are dealers selling them here in California?

noahinla
10-16-2014, 9:39 PM
The customer service rep was nice, but couldn't explain why they wouldn't ship it to California. I'm guessing it's just a computer error or something.

I ordered one from Atlantic Firearms instead and it shipped the same day, so I'll get it in the next few days.

Jack_Bauer
10-23-2014, 10:04 PM
Jgsales has them too. I ordered from them while Atlantic was on back order.

rrr70
10-24-2014, 7:42 AM
https://fbcdn-photos-c-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-0/s720x720/10488151_10204398231063326_8442360341425519138_n.j pg?oh=d00afb514898ee283dadc1af42f0286b&oe=54B59F4E&__gda__=1421386929_dce9474c87cc3ff0a1577e28fa5c9b1 2

NaSir510
10-25-2014, 10:31 PM
I like them all

Beatone
10-25-2014, 10:59 PM
My Draco.

http://i297.photobucket.com/albums/mm232/beatone2000/002_zpsb606f5ec.jpg


http://i297.photobucket.com/albums/mm232/beatone2000/001_zps46ef90fe.jpg

texterter
10-29-2014, 9:19 AM
surprised to hear about the order from budsgunshop.com

Jack_Bauer
11-03-2014, 9:51 PM
http://i101.photobucket.com/albums/m79/kalmstyle/CGN/2F90CC12-3450-4F71-B589-A88B7851FB5F-3280-000002A589B8F618_zps0bd38f31.jpg
Finally got mine!
Ak pistol from Atlantic Firearms
SB47 brace from JG Sales
Transfer at Metal Dog Tactical
Can't wait to try it!

NaSir510
11-07-2014, 6:10 AM
http://i756.photobucket.com/albums/xx201/Thearea510/chpa/IMG_1616.jpg (http://s756.photobucket.com/user/Thearea510/media/chpa/IMG_1616.jpg.html)

choppa!

boamedt
11-23-2014, 7:41 AM
/\nice

gvazquez
12-08-2014, 8:22 PM
http://i.imgur.com/5Tf7Md1l.jpg

http://i.imgur.com/sN1LRpRl.jpg

Dumas1012
12-08-2014, 8:42 PM
Nice! Can't wait to get my M92 and throw the SBX on it, but I can't justify spending that much cash for the folding adapter. :(. Or maybe I will.

andy standard
12-09-2014, 2:35 AM
http://i.imgur.com/5Tf7Md1l.jpg

http://i.imgur.com/sN1LRpRl.jpg


Damn that's a nice setup with the folding arm brace. Where did you pick it up from if I may ask?


Sent from my iPhone using Tapatalk

gvazquez
12-09-2014, 6:07 AM
Damn that's a nice setup with the folding arm brace. Where did you pick it up from if I may ask?


Sent from my iPhone using Tapatalk

It's an Ace folding adapter with a pistol tube. i like it, but it's pretty hard to disengage the lock manually, but it might just need some lube in the pivot pin.

Dumas1012
12-09-2014, 7:16 AM
It's an Ace folding adapter with a pistol tube. i like it, but it's pretty hard to disengage the lock manually, but it might just need some lube in the pivot pin.

How is it mounted?

gvazquez
12-09-2014, 7:26 AM
How is it mounted?

Drilled and tapped 2 holes (#9 bit and 5mm tap) on the rear then it bolted right up.

boamedt
12-09-2014, 8:12 AM
I dont have a pic of just the one right now.
http://img.photobucket.com/albums/v19/tiller2nv/20140823_094807.jpg (http://smg.photobucket.com/user/tiller2nv/media/20140823_094807.jpg.html)

is it me or does that mini draco have a side mount scope mount with a rail attached? my mini doesnt have a side rail.....

FiveSeven
12-09-2014, 9:18 AM
Drilled and tapped 2 holes (#9 bit and 5mm tap) on the rear then it bolted right up.

Right on, it's a cleaner way to attach an ArmBrace.
Atlantic Firearms sells a folder kit that bolts on existing SB47, it's o.k. This looks more like Sig mpx-sd.

Dumas1012
12-09-2014, 9:24 AM
Definitely looks a lot cleaner.

gvazquez
12-09-2014, 10:03 AM
This is where I got mine from:

Ace Folding Adapter from MidwayUSA (http://www.midwayusa.com/product/825786/ace-folding-stock-mechanism-with-ar-15-stock-interface-for-modular-receiver-blocks)

Atlantic Firearms
12-09-2014, 1:40 PM
http://www.atlanticfirearms.com/images/easyblog_shared/AKbraceAnimation.gif

andy standard
12-10-2014, 5:31 AM
http://www.atlanticfirearms.com/images/easyblog_shared/AKbraceAnimation.gif


Bah! Got to get one now and it's so close to Christmas haha. You guys offer discounts on these kits?


Sent from my iPhone using Tapatalk

rosemont83
12-10-2014, 11:43 AM
Thank youuuuu atlantic firearms!

http://i480.photobucket.com/albums/rr164/rosemont83/20141209_183357.jpg (http://s480.photobucket.com/user/rosemont83/media/20141209_183357.jpg.html)

gvazquez
12-11-2014, 7:54 AM
http://i.imgur.com/8FXTm9kl.jpg

http://i.imgur.com/t1Bmurxl.jpg

http://i.imgur.com/00O4P2Ll.jpg

bigpig1
12-11-2014, 11:32 AM
http://i.imgur.com/8FXTm9kl.jpg

http://i.imgur.com/t1Bmurxl.jpg

http://i.imgur.com/00O4P2Ll.jpg
What hand guard and arm brace is that you're runnin? Very ince!

gvazquez
12-11-2014, 12:14 PM
What hand guard and arm brace is that you're runnin? Very ince!

Sig SBX brace and strike industries rail modified to fit the mini Draco .

boamedt
12-19-2014, 4:11 PM
http://i.imgur.com/t1Bmurxl.jpg



Did u only have to modify the top cover?

texterter
12-19-2014, 7:25 PM
Nice work!

MC408
12-19-2014, 7:47 PM
http://i.imgur.com/8FXTm9kl.jpg

http://i.imgur.com/t1Bmurxl.jpg

http://i.imgur.com/00O4P2Ll.jpg

Very nice!

gvazquez
12-20-2014, 8:59 AM
Did u only have to modify the top cover?

Modified the top cover and mounts that go on the barrel.

Chunky_lover
12-27-2014, 2:21 PM
http://i117.photobucket.com/albums/o56/mikegigabyte/AK%2047/Draco/9bd46664-9afe-4c94-b64d-4edb026c3b8c_zpsa51f46d2.jpg (http://s117.photobucket.com/user/mikegigabyte/media/AK%2047/Draco/9bd46664-9afe-4c94-b64d-4edb026c3b8c_zpsa51f46d2.jpg.html)

Dumas1012
12-27-2014, 6:53 PM
Vasquez, thanks for the tip buddy. I still have to fine tune it so it sits straighter.

http://i385.photobucket.com/albums/oo293/phuphu1012/ak/FullSizeRender.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/ak/p4.jpg

gvazquez
12-28-2014, 12:26 PM
Vasquez, thanks for the tip buddy. I still have to fine tune it so it sits straighter.

http://i385.photobucket.com/albums/oo293/phuphu1012/ak/FullSizeRender.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/ak/p4.jpg

Glad to help, looks good. The reason you have the cant is due to the slight slant in the rear plate, on the Draco it's vertical.

Dumas1012
12-28-2014, 12:33 PM
Glad to help, looks good. The reason you have the cant is due to the slight slant in the rear plate, on the Draco it's vertical.

I'm going to shim it and see how it looks. Hopefully the gap won't be that noticeable.

FiveSeven
12-29-2014, 1:58 PM
http://img.photobucket.com/albums/0803/sergey25/Guns6/xx1_zpsb7dc331b.jpg~original

http://img.photobucket.com/albums/0803/sergey25/Guns6/xxx3_zpse97f266e.jpg~original

Chunky_lover
12-29-2014, 2:08 PM
like that mag lock design
what brand is that
looks easier to release
I think mine is solar tactical looks close to it

FiveSeven
12-29-2014, 2:10 PM
^

Strike Industries, it's much better and it's 50% les$ as well.

Chunky_lover
12-29-2014, 2:12 PM
on mine the single bolt not the 4 on a plate
if I go too tight, which is just barely tight so its not loose it sticks my mag release
so when I take out a mag I cant get another in unless that single bolt is loose


any issues with your type since it looks so similar

FiveSeven
12-29-2014, 2:18 PM
on mine the single bolt not the 4 on a plate
if I go too tight, which is just barely tight so its not loose it sticks my mag release
so when I take out a mag I cant get another in unless that single bolt is loose


any issues with your type since it looks so similar

Nope, all the screws are locked tight and no issue with removing mags using Allen wrench or bullet tip.

gwgn02
12-29-2014, 6:26 PM
^

Strike Industries, it's much better and it's 50% les$ as well.

You can turn the Solar Tactical types into the Strike types...need a dremel and steady hand, and small file to clean it up.

Chunky_lover
12-29-2014, 7:23 PM
You can turn the Solar Tactical types into the Strike types...need a dremel and steady hand, and small file to clean it up.

yes thats true and something I could do
but if you compare photos that other brand doesnt have the slot underneath like the solar one does

which makes me think if I slot out mine, it may be real weak

plus I still have my problem with the one bolt if I keep it snug/tight, it binds my mag lever

gwgn02
12-29-2014, 8:11 PM
yes thats true and something I could do
but if you compare photos that other brand doesnt have the slot underneath like the solar one does

which makes me think if I slot out mine, it may be real weak

plus I still have my problem with the one bolt if I keep it snug/tight, it binds my mag lever

You're right if you do try to mod it, it won't be as strong as the Strike design, but IMO from the ones i've done, it works ok. The Strike is superior though.

DRAB_81
01-03-2015, 1:51 PM
M92 PAP
http://i29.photobucket.com/albums/c297/rabara9/IMG_20141230_161128_zpsp18x9ztp.jpg (http://s29.photobucket.com/user/rabara9/media/IMG_20141230_161128_zpsp18x9ztp.jpg.html)

Draco
http://i29.photobucket.com/albums/c297/rabara9/Mobile%20Uploads/IMG_8699.jpg
http://i29.photobucket.com/albums/c297/rabara9/Mobile%20Uploads/IMG_0272.jpg

boamedt
01-03-2015, 6:05 PM
Interesting rail setup...care to share details?



http://i58.tinypic.com/2hfnvow.jpg

Dumas1012
01-03-2015, 7:18 PM
Nice paint job.


M92 PAP
http://i29.photobucket.com/albums/c297/rabara9/IMG_20141230_161128_zpsp18x9ztp.jpg (http://s29.photobucket.com/user/rabara9/media/IMG_20141230_161128_zpsp18x9ztp.jpg.html)

Draco
http://i29.photobucket.com/albums/c297/rabara9/Mobile%20Uploads/IMG_8699.jpg
http://i29.photobucket.com/albums/c297/rabara9/Mobile%20Uploads/IMG_0272.jpg

DRAB_81
01-03-2015, 8:48 PM
Nice paint job.

The Draco has a set of Iron Wood laminate furniture, finished by Combloc Customs. The M92 was my first attempt at a Stain/Dye/Shellac finish. I have another factory handguard for the M92, so I'm gonna give it another shot.

NoHeavyHitter
01-03-2015, 9:25 PM
The Draco has a set of Iron Wood laminate furniture, finished by Combloc Customs. The M92 was my first attempt at a Stain/Dye/Shellac finish. I have another factory handguard for the M92, so I'm gonna give it another shot.

Very nice work!

Dumas1012
01-03-2015, 10:55 PM
The Draco has a set of Iron Wood laminate furniture, finished by Combloc Customs. The M92 was my first attempt at a Stain/Dye/Shellac finish. I have another factory handguard for the M92, so I'm gonna give it another shot.

What's the procedure to get the dark spots? I'd like try it on my handguards.

DRAB_81
01-04-2015, 6:28 AM
What's the procedure to get the dark spots? I'd like try it on my handguards.

It's mostly just the grain of the wood & the way it came out in the picture. I might try to feather in extra dye/stain in some spots next time, but this one is pretty consistent.

lakersandguns
01-04-2015, 8:19 AM
Old mini of mine. Custom handguard done by me

http://www.calguns.net/calgunforum/attachment.php?attachmentid=379817&d=1420391705

raidz
01-04-2015, 1:08 PM
I'm leaning more towards the sling route, but never know.
http://i57.tinypic.com/j6u7bp.jpg

http://i58.tinypic.com/2hfnvow.jpg

Is that a KX3 flash hider?

Dumas1012
01-05-2015, 1:46 PM
I see that you have two castle nuts. I went ahead and cut the excess threads off my Hex 2 tube. It also made the length of pull almost an inch shorter which was perfect because my folding adapter added almost 2 inches.

FiveSeven
01-05-2015, 3:01 PM
Two castle nuts aren't to bad, if anything it keep the tube more secure as it helps the main nut from getting loose.
Length of the brace itself is right on, it does not get to close to the elbow when the arm is extended (firing). Actually, the top one originally had Atlantic Firearms folder and it came with a tube extension and it was too long so I ditched the whole setup.

radicalray
01-05-2015, 10:28 PM
Just got this before the door closed

http://i984.photobucket.com/albums/ae330/raybakker/Mobile%20Uploads/image-3.jpg (http://s984.photobucket.com/user/raybakker/media/Mobile%20Uploads/image-3.jpg.html)

boamedt
01-06-2015, 7:08 AM
Your mini has a side rail????? Did u put this on? I didn't think any of the minis or micros came with a side scope rail

http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx_zps13d9c547.jpg~original



http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx4_zps7564c825.jpg~original

FiveSeven
01-06-2015, 9:06 AM
Your mini has a side rail????? Did u put this on? I didn't think any of the minis or micros came with a side scope rail

I installed it.

andy standard
01-07-2015, 6:04 PM
I installed it.
What kind of muzzle device is that? Is it a Manticore eclipse? How do you like it?

CheeseCake
01-08-2015, 3:18 AM
http://i.imgur.com/iqLeOAul.jpg?1
http://i.imgur.com/uHqrcebl.jpg

Me Baby Choppa!

raidz
01-08-2015, 10:26 AM
http://i.imgur.com/iqLeOAul.jpg?1
http://i.imgur.com/uHqrcebl.jpg

Me Baby Choppa!

Where did you get that flash can?

andy standard
01-08-2015, 3:27 PM
http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx_zps13d9c547.jpg~original



http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx2_zps120c94f7.jpg~original



http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx3_zps711c7f07.jpg~original



http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx4_zps7564c825.jpg~original



Wondering what type of Flash hider that is?


Sent from my iPhone using Tapatalk

Poifekt
01-09-2015, 10:00 PM
Where did you get that flash can?

Looks like a KAK Industry "Flash Can".

http://www.kakindustry.com/review/product/list/id/191/category/12

Slimmer version of the one above
http://www.kakindustry.com/ar-15-parts/kak-industry-slim-flash-can-5-8

Gene1986
01-11-2015, 1:42 PM
381645

381646

Looks really cool, but definitely doesn't work flawlessly. Really love the look though.

Deadon
01-14-2015, 11:24 AM
http://img.photobucket.com/albums/v19/tiller2nv/20150114_121851.jpg (http://smg.photobucket.com/user/tiller2nv/media/20150114_121851.jpg.html)

Deadon
01-15-2015, 9:37 AM
Stained the front grip to match

http://img.photobucket.com/albums/v19/tiller2nv/Mobile%20Uploads/20150115_083453.jpg (http://smg.photobucket.com/user/tiller2nv/media/Mobile%20Uploads/20150115_083453.jpg.html)

Gene1986
01-15-2015, 10:44 AM
Anyone did a trigger job on there pap m92 or can help me ☺. Located in Hollywood

Dumas1012
01-17-2015, 11:07 AM
Anyone did a trigger job on there pap m92 or can help me ☺. Located in Hollywood

Or you can get the Tapco G2 trigger which is not a bad trigger at all.

andy standard
01-17-2015, 5:28 PM
http://tapatalk.imageshack.com/v2/15/01/17/6151ac61bcc9fb8c3bb5e0690627a705.jpg
Maybe this would still fall in line with me not shouldering the arm brace and keep it out the way? Either way love it and glad it's not permanent.


Sent from my iPhone using Tapatalk

IEatZ28
01-19-2015, 10:48 PM
Here's my updated c39 micro and my other pistols.

-Nick

dvs762
06-20-2015, 8:00 PM
Draco Pistol Battlefield Pickup...I like the distressed look..

http://i13.photobucket.com/albums/a291/DVS762/20150620_191503_zpsyxodzylx.jpg

http://i13.photobucket.com/albums/a291/DVS762/20150620_191604_zpskyx5qpoe.jpg

http://i13.photobucket.com/albums/a291/DVS762/20150620_191658_zpsancbu5fg.jpg


http://i13.photobucket.com/albums/a291/DVS762/20150620_191704_zpsyjerfptk.jpg

http://i13.photobucket.com/albums/a291/DVS762/20150620_191716_zpsns1lbnyc.jpg

victorr
06-23-2015, 10:02 AM
^Very nice distressed Draco!

Another Draco with wood done by Hellayella:
http://i5.photobucket.com/albums/y187/vrivilla/Guns/a8512a6a-1405-4b60-90bc-f1e590c818ba_zps1oao6kum.jpg

dvs762
06-23-2015, 10:06 AM
thanks..I never see a BFPU Draco so I made one..nice laminate lower hand guard.. is top also laminate?

victorr
06-23-2015, 10:58 AM
^PM'd

FiveSeven
06-24-2015, 8:31 AM
Draco Pistol Battlefield Pickup...I like the distressed look..

http://i13.photobucket.com/albums/a291/DVS762/20150620_191503_zpsyxodzylx.jpg

Looks cool but I wouldn't have made the mag lock to match, should be new.
I can't imagine someone on a battlefield running around with a mag lock.

dvs762
06-24-2015, 11:34 AM
at first I did that..but it just didn't look right...it was like putting a new door on a crashed car...it didnt fit in with the whole theme...

andy standard
07-09-2015, 11:29 AM
http://images.tapatalk-cdn.com/15/07/09/4c33fe411a4689f837afb11a8128b387.jpg
First time staining the hand guards and I think it didn't come out that bad. Now I gotta find a gunsmith to install the stormwerks rail...


Sent from my iPhone using Tapatalk

Army GI
09-03-2015, 11:46 AM
http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx_zps13d9c547.jpg~original

http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx2_zps120c94f7.jpg~original

http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx3_zps711c7f07.jpg~original

http://img.photobucket.com/albums/0803/sergey25/Guns6/Image1cx4_zps7564c825.jpg~original

I just wanted to say that looks AMAZING!

I was thinking about getting an M92, but after seeing these pics, I might go Draco instead.

gvazquez
09-10-2015, 9:54 AM
Mini Draco AK Pistol

http://i.imgur.com/D4vCYZel.jpg
http://i.imgur.com/VU4DIbul.jpg
http://i.imgur.com/dL8HV2fl.jpg

26" OAL (pinned muzzle)
KAC VFG
Strike Industries Rail
Shockwave Stabilizer
CAA Cheek Saddle
Vortex Sparc
Magpul Grip
ACE Folding Buffer tube adapter (fixed)

Nuuze
09-10-2015, 7:03 PM
Still debating which muzzle device... :D

http://i110.photobucket.com/albums/n85/Nuuze/Guns/DB98CC2D-080F-4CCC-BE5C-E55B7ECD1A28_zps13xflck4.jpg (http://s110.photobucket.com/user/Nuuze/media/Guns/DB98CC2D-080F-4CCC-BE5C-E55B7ECD1A28_zps13xflck4.jpg.html)

slomofo
11-06-2015, 10:43 PM
I need to pick up some muzzle detents and brakes, the thread protector caps on them now are goofy looking. The one with the brace has a HUGE spot weld holding the cap on, I think the finish is going to get fudged when I remove it.

http://images.tapatalk-cdn.com/15/11/06/2878b25905cdb15448658ef44ab5eae1.jpg

http://images.tapatalk-cdn.com/15/11/06/5da340bfae22d3bfbdadb1554e2b583a.jpg

Sent from my Nexus 6 using Tapatalk

michael0594
11-07-2015, 8:00 AM
Mini Draco AK Pistol

http://i.imgur.com/D4vCYZel.jpg
http://i.imgur.com/VU4DIbul.jpg
http://i.imgur.com/dL8HV2fl.jpg

26" OAL (pinned muzzle)
KAC VFG
Strike Industries Rail
Shockwave Stabilizer
CAA Cheek Saddle
Vortex Sparc
Magpul Grip
ACE Folding Buffer tube adapter (fixed)

Isn't vertical grip illegal on handgun?