PDA

View Full Version : WTS: Sig Sauer P226/P228/P229 OEM Parts: Grips, Struts, and Springs - Oakland, Ca


SafeNSecure
01-07-2015, 9:12 AM
I have 3 OEM trigger springs for a Sig Sauer P226/P228/P229. These are the "old style" bow type. They do not have the coil in the middle. They fit under the original and newer style grip panels. One of the springs is brand new/unused, one has 150 rnds on it , and the third has an unknown round count. The firearm the third trigger spring and the rest of the parts were removed from appears to have seen little use as it is in pristine condition. I would guess the parts have LOTS of life left in them. I also have four (4) used OEM blue grip screws that are in excellent condition. A hollow ground screw driver was used when removing the grip screws. Send me an email if you have any questions (Vinyl4tubes at yahoo dhot khom). Thanks.



$7.00 for all 3 trigger springs.
$5.00 for the 4 grip screws.
$10.00 for new style P226 two piece black plastic grip panels.
$6.00 for mid 80's original P226 two piece plastic grip panels.
$12.00 for old style hammer strut, mainspring, and seat. Fits P225, P226, P228, P229.
$2.00 for blue decocking lever. Fits P226, P228, P229.
$2.00 for slide catch lever spring. Fits P225, P226, P227, P228
$15.00 for Sig standard blue trigger. Fits P226, P227, P228, & P229.



$45 for all

Shipping will be $5.50 minimum for the smaller parts. Slightly higher for the grips and multiple part(s) shipment. Local pick up is also available. Thanks.

For fastest response please contact me at: Vinyl4tubes at yahoo dot com

SafeNSecure
04-02-2015, 7:45 PM
All parts - SOLD