Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > FIREARMS DISCUSSIONS > Centerfire Rifles - Semiautomatic or Gas Operated
Register FAQ Members List Calendar Mark Forums Read

Centerfire Rifles - Semiautomatic or Gas Operated Centerfire rifles, carbines and other gas operated rifles.

Reply
 
Thread Tools Display Modes
  #1  
Old 03-05-2014, 7:58 AM
somiskid's Avatar
somiskid somiskid is offline
Senior Member
 
Join Date: Mar 2009
Location: SOMIS CA
Posts: 955
iTrader: 2 / 100%
Default Who has 45ACP uppers in stock??? Need some help!!

Hey Guys looking for a 45acp upper. Who has them in stock? Thanks!!
__________________
Reply With Quote
  #2  
Old 03-05-2014, 8:00 AM
JackRydden224's Avatar
JackRydden224 JackRydden224 is online now
Single stack pistol guy
CGN Contributor
 
Join Date: Aug 2011
Location: Irvine
Posts: 6,418
iTrader: 72 / 100%
Default

My question to you would be what lower are you using??
__________________
w210838 is the barrel guy don't forget.

Quote:
Originally Posted by HopetonBrown View Post
The average Calgunner is afraid to scratch his gun; so I don't see the point to these torture tests.
Reply With Quote
  #3  
Old 03-05-2014, 8:02 AM
somiskid's Avatar
somiskid somiskid is offline
Senior Member
 
Join Date: Mar 2009
Location: SOMIS CA
Posts: 955
iTrader: 2 / 100%
Default

Quote:
Originally Posted by JackRydden224 View Post
My question to you would be what lower are you using??
just a standard mil spec lower. I don't want to build a pistol I want to build a rifle.
__________________
Reply With Quote
  #4  
Old 03-05-2014, 8:08 AM
JackRydden224's Avatar
JackRydden224 JackRydden224 is online now
Single stack pistol guy
CGN Contributor
 
Join Date: Aug 2011
Location: Irvine
Posts: 6,418
iTrader: 72 / 100%
Default

Interesting, I did not know you can use a standard AR lower for a .45 ACP build. Now I'm interested in finding out about the upper as well! I'm guessing your lower would use grease gun mags?
__________________
w210838 is the barrel guy don't forget.

Quote:
Originally Posted by HopetonBrown View Post
The average Calgunner is afraid to scratch his gun; so I don't see the point to these torture tests.
Reply With Quote
  #5  
Old 03-05-2014, 8:11 AM
somiskid's Avatar
somiskid somiskid is offline
Senior Member
 
Join Date: Mar 2009
Location: SOMIS CA
Posts: 955
iTrader: 2 / 100%
Default

Quote:
Originally Posted by JackRydden224 View Post
Interesting, I did not know you can use a standard AR lower for a .45 ACP build. Now I'm interested in finding out about the upper as well! I'm guessing your lower would use grease gun mags?
I know that Olympic arms makes an upper that is meant to work with a standard lower but that's about all I know.
__________________
Reply With Quote
  #6  
Old 03-05-2014, 10:44 AM
OverUnderClays's Avatar
OverUnderClays OverUnderClays is offline
Working my *** off...
CGN Contributor
 
Join Date: Jul 2012
Location: Three places, the office, the house, and the reloading bench.
Posts: 300
iTrader: 18 / 100%
Blog Entries: 1
Default

Check out RMW

RMW Extreme.

Looks like Bazooka Brothers is a distributor. I'm not really sure about the mags being Kali legal though.
__________________
You want to make a difference in getting your voice heard about protecting your right to have a firearm in CA?

Time to fight in 2015 using FPC: https://www.firearmspolicy.org/act/california/

Contact Brown through email: http://govnews.ca.gov/gov39mail/mail.php
Reply With Quote
  #7  
Old 03-05-2014, 11:29 AM
arga's Avatar
arga arga is offline
Member
 
Join Date: Jul 2010
Posts: 146
iTrader: 1 / 100%
Default

I know Mad Machinest on Weaponsguild builds these for the CNC Gunsmithing 80% lower. Check "Macon Armory" in their vendor section. His uppers are DI as opposed to blowback. I seem to remember his ejector being a little weird though but that might have been someone else. Do your homework first.

There's another guy on there too but I can't remember his name.
Reply With Quote
  #8  
Old 03-05-2014, 11:40 AM
JackRydden224's Avatar
JackRydden224 JackRydden224 is online now
Single stack pistol guy
CGN Contributor
 
Join Date: Aug 2011
Location: Irvine
Posts: 6,418
iTrader: 72 / 100%
Default

Quote:
Originally Posted by arga View Post
I know Mad Machinest on Weaponsguild builds these for the CNC Gunsmithing 80% lower. Check "Macon Armory" in their vendor section. His uppers are DI as opposed to blowback. I seem to remember his ejector being a little weird though but that might have been someone else. Do your homework first.

There's another guy on there too but I can't remember his name.
Interesting. Where can we get 10 rd grease gun mags?
__________________
w210838 is the barrel guy don't forget.

Quote:
Originally Posted by HopetonBrown View Post
The average Calgunner is afraid to scratch his gun; so I don't see the point to these torture tests.
Reply With Quote
  #9  
Old 03-05-2014, 12:48 PM
neouser neouser is offline
Senior Member
 
Join Date: Jan 2012
Posts: 935
iTrader: 10 / 100%
Default

I have no idea where Somis is, bur River City Gun Exchange in Sacramento has 45 ACP upppers in stock.
Reply With Quote
  #10  
Old 03-05-2014, 12:57 PM
Vin63's Avatar
Vin63 Vin63 is offline
Senior Member
 
Join Date: Nov 2012
Location: SoCal
Posts: 1,214
iTrader: 22 / 96%
Default

Quote:
Originally Posted by somiskid View Post
I know that Olympic arms makes an upper that is meant to work with a standard lower but that's about all I know.
This is what I was considering (possibly still am)

http://www.olyarms.com/shop/upper-receivers/k45-ur.html
__________________
CH3NO2
Reply With Quote
  #11  
Old 03-05-2014, 1:58 PM
shooter1975's Avatar
shooter1975 shooter1975 is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Dec 2012
Location: Woodland Hills, CA
Posts: 615
iTrader: 16 / 100%
Default

Quote:
Originally Posted by Vin63 View Post
This is what I was considering (possibly still am)

http://www.olyarms.com/shop/upper-receivers/k45-ur.html
That would be interesting in 10mm!
Reply With Quote
  #12  
Old 03-05-2014, 2:08 PM
Metal Fiend's Avatar
Metal Fiend Metal Fiend is offline
Senior Member
 
Join Date: Oct 2011
Location: Sacramento
Posts: 909
iTrader: 0 / 0%
Default

Quote:
Originally Posted by neouser View Post
I have no idea where Somis is, bur River City Gun Exchange in Sacramento has 45 ACP upppers in stock.
They also have stripped .45 acp lowers for $419
Reply With Quote
  #13  
Old 03-05-2014, 4:09 PM
Mad Machinist Mad Machinist is offline
Junior Member
 
Join Date: Feb 2014
Posts: 67
iTrader: 0 / 0%
Default

Shoot me an email to rudyk@maconarmory.com. We are just introducing a magwell adaptor for standard lowers that just slips in like a magazine.....and uses HK USC magazines available in a 10 round capacity from Promag.....we'll have a CA legal version available and I have uppers on the shelf. I'll have a video up in the next day or so showing the transition from 5.56 to 45 in one continious shot. Nothing wierd about my extractor or ejector......they are standard Gas operated AR-15....the extractor is just made to match the rim of the .45 round as is the bolt. This is just a rough video out behind the shop......we knew the magwell adaptor ran ...just testing the bolt hold open so no full mags.....and pretty crappy video.....was just to send to my partner and the first mag I'm shooting from is a 10 round USC. I'm doing my best to bring things to life that will help those of you "behind enemy lines"

I am also the supplier of .45 ACP Uppers endorsed by both Justin at CNC Guns for the AR45 lower....and by GWACS Armory, makers of the Cav Arms MKII with Hahn magwell adaptor...

http://www.youtube.com/watch?v=kWCmGDAvMFg

Last edited by Mad Machinist; 03-05-2014 at 4:32 PM..
Reply With Quote
  #14  
Old 03-05-2014, 4:29 PM
bohoki's Avatar
bohoki bohoki is offline
I need a LIFE!!
 
Join Date: Jan 2006
Location: 95492
Posts: 17,806
iTrader: 20 / 100%
Default

i really had a jonesing for one of those years ago but then i realized i would have to clean my crummy cast lead out of 16 inches or barrel

and i came to my senses its hard enough scrubbing it out of my 5 inch 1911 barrel
__________________
Reply With Quote
  #15  
Old 03-05-2014, 6:46 PM
Eric B's Avatar
Eric B Eric B is offline
Senior Member
 
Join Date: Jul 2012
Location: San Jose
Posts: 762
iTrader: 25 / 100%
Default

Well damnit. Where was this when I bought my USC?
Reply With Quote
  #16  
Old 03-05-2014, 6:50 PM
Mad Machinist Mad Machinist is offline
Junior Member
 
Join Date: Feb 2014
Posts: 67
iTrader: 0 / 0%
Default

Quote:
Originally Posted by Eric B View Post
Well damnit. Where was this when I bought my USC?
Did the proof of concept about a year ago on the magwell adaptor......just finally got the CNC mill and lathe to give me production capability.....and just got the last round bolt hold open done a couple of weeks back.....but I've been building the uppers for CNC guns and Cav Arms lowers for years......but I've always wanted a solution for a standard lower in .45 with an off the shelf magazine...................now I have one.....

Last edited by Mad Machinist; 03-05-2014 at 7:03 PM..
Reply With Quote
  #17  
Old 03-05-2014, 6:56 PM
Eric B's Avatar
Eric B Eric B is offline
Senior Member
 
Join Date: Jul 2012
Location: San Jose
Posts: 762
iTrader: 25 / 100%
Default

I've wanted that too. Now... Now we have it?
Reply With Quote
  #18  
Old 03-05-2014, 8:01 PM
Pauliedad Pauliedad is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Dec 2012
Location: Contra Costa County - 925
Posts: 2,100
iTrader: 70 / 100%
Default

Tag
Reply With Quote
  #19  
Old 03-06-2014, 5:17 AM
Mad Machinist Mad Machinist is offline
Junior Member
 
Join Date: Feb 2014
Posts: 67
iTrader: 0 / 0%
Default

Quote:
Originally Posted by Eric B View Post
I've wanted that too. Now... Now we have it?
Yes....yes we do......Here is a pic of the standard 16 inch DI upper with Samson Evolution handguard on a shop lower with the magwell adaptor inserted and a 10 round ProMag USC Magazine.
It is a pretty well made affair with steel feed lips molded in.........and while the website isn't up yet
Here is a short informational video featuring the Macon Armory AR15 45 ACP conversion and some fat old guy....
https://www.youtube.com/watch?v=1AyOPATXW7Y
Attached Images
File Type: jpg AR45 10 rnd USC.jpg (62.4 KB, 85 views)

Last edited by Mad Machinist; 03-06-2014 at 5:24 AM..
Reply With Quote
  #20  
Old 03-06-2014, 5:53 AM
solo3937's Avatar
solo3937 solo3937 is online now
Member
 
Join Date: Nov 2007
Location: central coast california
Posts: 112
iTrader: 44 / 100%
Default

Rudy built me a DI 45 upper last year. It is probably the most fun set up I have to shoot.

I originally started with a mag block and Pro Mag Uzi magazines. It has been a very reliable set up. I recently switched to one of Justin's CNC45 lowers, haven't had a chance to take it to the range yet, but the ability to use un-modified grease gun mags is a major plus!

Rudy is the go to guy to answer all your questions regarding DI45 setups. He will not steer you wrong!
__________________
ECV
Monterey Viejo #1846
Mountain Charlie #1850
James W. Marshall #49
"Credo Quia Absurdum"

Reply With Quote
  #21  
Old 03-06-2014, 6:57 AM
Eric B's Avatar
Eric B Eric B is offline
Senior Member
 
Join Date: Jul 2012
Location: San Jose
Posts: 762
iTrader: 25 / 100%
Default

Well, Macon Armory, I believe you'll have a new customer soon.
Reply With Quote
  #22  
Old 03-06-2014, 7:58 AM
JackRydden224's Avatar
JackRydden224 JackRydden224 is online now
Single stack pistol guy
CGN Contributor
 
Join Date: Aug 2011
Location: Irvine
Posts: 6,418
iTrader: 72 / 100%
Default

What's the gas system length for that DI45?
__________________
w210838 is the barrel guy don't forget.

Quote:
Originally Posted by HopetonBrown View Post
The average Calgunner is afraid to scratch his gun; so I don't see the point to these torture tests.

Last edited by JackRydden224; 03-06-2014 at 8:01 AM..
Reply With Quote
  #23  
Old 03-06-2014, 8:27 AM
nitroxdiver's Avatar
nitroxdiver nitroxdiver is offline
Veteran Member
 
Join Date: Aug 2009
Posts: 2,740
iTrader: 3 / 100%
Default

Very nice Rudy. Great choice going with USC mags IMHO. For the free state folks, hera arms makes up to 25 round USC mags.


Sent from classified location using Tapatalk.
Reply With Quote
  #24  
Old 03-06-2014, 9:40 AM
OverUnderClays's Avatar
OverUnderClays OverUnderClays is offline
Working my *** off...
CGN Contributor
 
Join Date: Jul 2012
Location: Three places, the office, the house, and the reloading bench.
Posts: 300
iTrader: 18 / 100%
Blog Entries: 1
Default

Quote:
Originally Posted by Mad Machinist View Post
Shoot me an email to rudyk@maconarmory.com. We are just introducing a magwell adaptor for standard lowers that just slips in like a magazine.....and uses HK USC magazines available in a 10 round capacity from Promag.....we'll have a CA legal version available and I have uppers on the shelf. I'll have a video up in the next day or so showing the transition from 5.56 to 45 in one continious shot. Nothing wierd about my extractor or ejector......they are standard Gas operated AR-15....the extractor is just made to match the rim of the .45 round as is the bolt. This is just a rough video out behind the shop......we knew the magwell adaptor ran ...just testing the bolt hold open so no full mags.....and pretty crappy video.....was just to send to my partner and the first mag I'm shooting from is a 10 round USC. I'm doing my best to bring things to life that will help those of you "behind enemy lines"

I am also the supplier of .45 ACP Uppers endorsed by both Justin at CNC Guns for the AR45 lower....and by GWACS Armory, makers of the Cav Arms MKII with Hahn magwell adaptor...

http://www.youtube.com/watch?v=kWCmGDAvMFg
Now that looks promising. I'll be sending you an email sir regarding pricing. Thanks!
__________________
You want to make a difference in getting your voice heard about protecting your right to have a firearm in CA?

Time to fight in 2015 using FPC: https://www.firearmspolicy.org/act/california/

Contact Brown through email: http://govnews.ca.gov/gov39mail/mail.php
Reply With Quote
  #25  
Old 03-06-2014, 10:29 AM
Mad Machinist Mad Machinist is offline
Junior Member
 
Join Date: Feb 2014
Posts: 67
iTrader: 0 / 0%
Default

Quote:
Originally Posted by JackRydden224 View Post
What's the gas system length for that DI45?
It is a VERY short 100% custom affair...no commercially available components. I make my own gas blocks and tubes here.
I subcontract bolts and extractors and make all my barrels from raw rifled barrel blanks in house....just bought a Haas SL20T CNC lathe to speed up the process......and a VS2 CNC mill.....getting ready to add a 4th axis as well....
hopefully we'll get the website up and running soon.....or at least an informational site.......but considering ti was building these in the back of the engine shop in a corner six months ago...LOL....we ahve come along way...new shop, new equipment and a bunch of new products in the works. Our focus is to provide the AR15 community with all things pistol caliber and do everything we can to provide as much of it as possible to those behind enemy lines.
I'm a former army officer...and stupid laws just generally piss me off....LOL

Quote:
Originally Posted by solo3937 View Post
Rudy built me a DI 45 upper last year. It is probably the most fun set up I have to shoot.

I originally started with a mag block and Pro Mag Uzi magazines. It has been a very reliable set up. I recently switched to one of Justin's CNC45 lowers, haven't had a chance to take it to the range yet, but the ability to use un-modified grease gun mags is a major plus!

Rudy is the go to guy to answer all your questions regarding DI45 setups. He will not steer you wrong!
Thanks for the kind words.....I do my best.....Is that you Mark? Congrats on the AR45 lower.....I know you love it.....and I think I have one still in the wrapper 1950's vintage M3 mag on this pile I call a desk SOMEWHERE...does that make a difference in CA?

Last edited by Mad Machinist; 03-06-2014 at 1:33 PM..
Reply With Quote
  #26  
Old 03-06-2014, 11:41 PM
leftyloo leftyloo is offline
Member
 
Join Date: Mar 2012
Posts: 145
iTrader: 22 / 100%
Default

Tag
Reply With Quote
  #27  
Old 03-07-2014, 9:02 AM
deadcoyote's Avatar
deadcoyote deadcoyote is offline
Senior Member
 
Join Date: Apr 2010
Location: Far North CA
Posts: 2,134
iTrader: 4 / 100%
Default

Oly makes a .45 upper that is blow back and is designed to use their not so bueno proprietary mags. There's an outfit that makes a .45 spicific AR lower that uses standard lower parts and the oly upper but is wider than spec to accept grease gun mags. google AR-45 lower. I wanted to build one but the stripped lower is $400.
__________________
Buying a safe and sane firework is like paying a hooker for a hug. I do not see the appeal in it.
Reply With Quote
  #28  
Old 03-07-2014, 2:51 PM
Mad Machinist Mad Machinist is offline
Junior Member
 
Join Date: Feb 2014
Posts: 67
iTrader: 0 / 0%
Default

Quote:
Originally Posted by deadcoyote View Post
Oly makes a .45 upper that is blow back and is designed to use their not so bueno proprietary mags. There's an outfit that makes a .45 spicific AR lower that uses standard lower parts and the oly upper but is wider than spec to accept grease gun mags. google AR-45 lower. I wanted to build one but the stripped lower is $400.
Actually Justin at CNC guns has them on sale for $275 plus shipping....if you are interested I'll post his amended purchase order here.

I promise...if you ever shoot a DI 45......you'll never even mention Olympic blowback again.........
Reply With Quote
  #29  
Old 03-07-2014, 3:06 PM
green grunt's Avatar
green grunt green grunt is offline
Member
 
Join Date: Oct 2008
Location: Lodi
Posts: 416
iTrader: 12 / 100%
Default

AR in 45acp....I like.....in touch with Rudy now , great guy , working on getting one set up "old school" style (A1), I tried the OlyArms upper with there mag....did not float my boat ! , it worked most of the time , I've tried other 45acp carbines , Thuron defense , Marlin camp carbine , but want one that will slip onto my reg. AR lower and be GTG ....if all go's well I'll give a range report at a later date.

no funds right now , can't spend that much yet ....working on it....GG

Last edited by green grunt; 03-10-2014 at 9:48 AM.. Reason: add info
Reply With Quote
  #30  
Old 03-07-2014, 3:12 PM
MR_X's Avatar
MR_X MR_X is offline
Member
 
Join Date: Jul 2013
Location: FREE STATE
Posts: 391
iTrader: 4 / 100%
Default

Quote:
Originally Posted by Mad Machinist View Post
Yes....yes we do......Here is a pic of the standard 16 inch DI upper with Samson Evolution handguard on a shop lower with the magwell adaptor inserted and a 10 round ProMag USC Magazine.
It is a pretty well made affair with steel feed lips molded in.........and while the website isn't up yet
Here is a short informational video featuring the Macon Armory AR15 45 ACP conversion and some fat old guy....
https://www.youtube.com/watch?v=1AyOPATXW7Y
Been looking for this configuration for a WHILE. Emailing you

Last edited by MR_X; 03-07-2014 at 3:54 PM..
Reply With Quote
  #31  
Old 03-07-2014, 3:16 PM
JackRydden224's Avatar
JackRydden224 JackRydden224 is online now
Single stack pistol guy
CGN Contributor
 
Join Date: Aug 2011
Location: Irvine
Posts: 6,418
iTrader: 72 / 100%
Default

Rudy I just sent you an email on custom build DI45 uppers.

I think we are interested in the prices for the adapters as well if we do not go with Justin @ CNC.
__________________
w210838 is the barrel guy don't forget.

Quote:
Originally Posted by HopetonBrown View Post
The average Calgunner is afraid to scratch his gun; so I don't see the point to these torture tests.
Reply With Quote
  #32  
Old 03-07-2014, 3:17 PM
JackRydden224's Avatar
JackRydden224 JackRydden224 is online now
Single stack pistol guy
CGN Contributor
 
Join Date: Aug 2011
Location: Irvine
Posts: 6,418
iTrader: 72 / 100%
Default

Rudy I just sent you an email on custom build DI45 uppers.

I think we are interested in the prices for the adapters as well if we do not go with Justin @ CNC.
__________________
w210838 is the barrel guy don't forget.

Quote:
Originally Posted by HopetonBrown View Post
The average Calgunner is afraid to scratch his gun; so I don't see the point to these torture tests.
Reply With Quote
  #33  
Old 03-07-2014, 4:06 PM
weespeed's Avatar
weespeed weespeed is offline
Senior Member
 
Join Date: Feb 2012
Posts: 530
iTrader: 43 / 100%
Default

Quote:
Originally Posted by Mad Machinist View Post
It is a VERY short 100% custom affair...no commercially available components. I make my own gas blocks and tubes here.
I subcontract bolts and extractors and make all my barrels from raw rifled barrel blanks in house....just bought a Haas SL20T CNC lathe to speed up the process......and a VS2 CNC mill.....getting ready to add a 4th axis as well....
hopefully we'll get the website up and running soon.....or at least an informational site.......but considering ti was building these in the back of the engine shop in a corner six months ago...LOL....we ahve come along way...new shop, new equipment and a bunch of new products in the works. Our focus is to provide the AR15 community with all things pistol caliber and do everything we can to provide as much of it as possible to those behind enemy lines.
I'm a former army officer...and stupid laws just generally piss me off....LOL
Will you have any in pistol lengths as well, like 7" to 10"?

Thanks and tagged.
Reply With Quote
  #34  
Old 03-07-2014, 4:48 PM
veterosa's Avatar
veterosa veterosa is offline
Senior Member
 
Join Date: Jun 2008
Location: Los Angeles, CA
Posts: 1,120
iTrader: 53 / 100%
Default

Heres my Oly .45 & 9 mm

[/QUOTE][/QUOTE]
__________________
"We cannot free ourselves unless we move forward united in a single desire."
Emilio Aguinaldo

Forgive your enemies, but never forget their names.
John F. Kennedy

ΜΟΛ'ΩΝ ΛΑΒ'Ε САЙГА-12
Reply With Quote
  #35  
Old 03-07-2014, 6:46 PM
MR_X's Avatar
MR_X MR_X is offline
Member
 
Join Date: Jul 2013
Location: FREE STATE
Posts: 391
iTrader: 4 / 100%
Default

^what muzzle device you using on the 45?
Reply With Quote
  #36  
Old 03-07-2014, 7:03 PM
veterosa's Avatar
veterosa veterosa is offline
Senior Member
 
Join Date: Jun 2008
Location: Los Angeles, CA
Posts: 1,120
iTrader: 53 / 100%
Default

Quote:
Originally Posted by MR_X View Post
^what muzzle device you using on the 45?
Bower's Group SMG muzzle devise

http://www.subguns.org/BowersGroupRetail.pdf
__________________
"We cannot free ourselves unless we move forward united in a single desire."
Emilio Aguinaldo

Forgive your enemies, but never forget their names.
John F. Kennedy

ΜΟΛ'ΩΝ ΛΑΒ'Ε САЙГА-12
Reply With Quote
  #37  
Old 03-08-2014, 4:06 PM
Mad Machinist Mad Machinist is offline
Junior Member
 
Join Date: Feb 2014
Posts: 67
iTrader: 0 / 0%
Default

Quote:
Originally Posted by weespeed View Post
Will you have any in pistol lengths as well, like 7" to 10"?

Thanks and tagged.
The pistol length uppers are available.....but still working on getting the LRBHO to work with barrels shorter than 10 inches......will probably start working on a lightened bolt carrier next week....but it works fine with 10 inch and longer. Just fartin around at the shop this morning.....
I threw together a 5 inch barrel upper it runs great on a CNC lower and with the new adaptor...just no bolt hold open on the last round. I need a high speed camera to SEE what is going on. That would probably help me with a lot of new designs in the future as well.
Quote:
Originally Posted by JackRydden224 View Post
Rudy I just sent you an email on custom build DI45 uppers.

I think we are interested in the prices for the adapters as well if we do not go with Justin @ CNC.
Jack...I have build literally hundres of uppers for Justins lowers.....you'll be pleased either way....I have 5 CNC AR45's personally.....and a GWACS Cav Arms, and now my HK USC adapptor in a lower......the only bad thing about making AR's for a living......I'm not really sure how many I have anymore...........it's a tough job but somebody's gotta do it.....

veterosa.....nice bullet launchers.....but I promise, if you come over to the DI side you'll never go back.....

Last edited by Mad Machinist; 03-08-2014 at 4:27 PM..
Reply With Quote
  #38  
Old 03-08-2014, 4:36 PM
Mad Machinist Mad Machinist is offline
Junior Member
 
Join Date: Feb 2014
Posts: 67
iTrader: 0 / 0%
Default

If ya'll will do me a huge favor...when you send an email, please include that you are from CalGuns and include your screen name. Thanks,
Rudy

Last edited by Mad Machinist; 03-08-2014 at 4:39 PM..
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 8:59 AM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2016, Calguns.net an Incorporated Company All Rights Reserved.