Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > VENDORS > Elite Arms and Supply
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 04-10-2014, 12:12 PM
curvejunkie's Avatar
curvejunkie curvejunkie is offline
Vendor/Retailer
 
Join Date: Dec 2010
Location: Central Valley, CA
Posts: 780
iTrader: 2 / 100%
Smile PredatOBR 5.56 14.5" in stock

Two units now in stock 14.5" units w/flash hider.

$2399.99

LaRue Tactical PredatOBR™ 5.56


The PredatOBR 5.56 was designed for those who are searching for a hybrid cross between the standard OBR and PredatAR 5.56x45 Rifles. The PredatOBR takes the highly accurate OBR 5.56 design, and lightens it in every possible way with the least-possible impact to the accuracy that the standard OBR is known for.

The most remarkable feature of the PredatOBR is its ability to be completely “broken down” and stored into the optional Rollup Bag and Toolbox. The PredatOBR handguard has a locking stainless steel QD Lever system on each side. Once the levers are released, the handguard slides off of the upper assembly in seconds. The PredatOBR's barrel can easily be removed with the supplied PredatOBR Barrel Wrench, unscrew the Barrel Nut from Receiver and pull the Barrel Assembly free from Receiver. No need to remove the gas tube, gas block or muzzle device. Reverse the process to reinstall. Hand-tighten Barrel Nut and torque approximately 1/8-turn past hand-tight (Approximately 40-50 foot pounds). Once reassembled correctly, the point of impact (POI) shift will be 0.0 to 0.5 MOA of the original.

PredatOBR barrels are chambered in 5.56x45mm, and feature rifling in a 1/8 twist rate. All muzzles are threaded in 1/2 x 28. Like the OBR and PredatAR riles, LaRue has eliminated the conventional AR barrel nut and bolt the handguard directly to the proprietary upper receiver, creating a true “free-float” barrel. The handguard does not touch the barrel or barrel nut at any place. The zero-MOA upper rail provides plenty of room for weapon-mounted night-vision day/night combinations. Both the upper and lower are CNC-machined from billet aluminum for the optimum fit and consistency. Even though it has been lightened certain features, there is still additional material in strategic areas to achieve maximum accuracy.

The PredatOBR has threaded stainless-steel hard-points over the entire length of the handguard at the 3, 6, and 9 o’clock positions. These hard-points have an integral spine built-in for structural support. Provided with the system are three 3-inch MIL-STD-1913 rail sections that can be positioned anywhere along the handguard, per operator preference. These rail sections are attachable/detachable using a supplied tool (Torx® T-15 wrench). The rail sections are CNC-machined from billet aluminum. This robust solution provides a perfect precision mounting space for aiming lasers, illumination and bipods.

The PredatOBR's Port Selector Technology™ (PST) gas block is adjustable, to aid in the optimum function when using a sound suppressor. This special gas block contains a dual port mechanism that is operated by rotating a lever from one side to another. When the lever is rotated to the right-side of the rifle, the gasses are reduced, to compensate for the extra blowback created by the suppressor. When rotated to the left side, the gasses are increased for use without a suppressor.

The LaRue Tactical 6-position Retract Action Trigger (R.A.T.) Stock comes standard with every PredatOBR. It is ergonomic, has protected control surfaces and contains a set of cleaning rods in an internal compartment. Since the height of the 12 o’clock rail is at the optimum position, there is no need for a cheek riser as part of this system. The New A-PEG grip also comes standard. This grip was designed to be ambidextrous and places the hand in the corrected position for precision shooting.


Specifications:
Caliber: 5.56 x 45 mm NATO
Barrel Lengths: 14.5”,16.1”and 18”
Rifling Twist Rate: 1/8
Barrel Life: 10,000 (approx)
Gas System: Direct Impingement with LaRue PST™ port selector

Accessories:
2ea, 30-Round Magazines
3ea 3” Rail Sections
Operators Manual
Barrel Wrench

About the “Black Gold” Trigger:
We are very proud to announce that we’ve selected the American Trigger Corporation AR Gold trigger to be installed in LaRue PredatOBRs going forward. These are a single stage trigger with take-up and a super short reset, similar in feel to a best-grade 1911 trigger, providing the optimum trigger action for a wide variety of shooting styles and disciplines. AR Gold Triggers have been used by some of the best competition shooters in the world for the last few years and dominate the top of the 3 Gun competition world.

We have been testing and evaluating these triggers for well over a year, to ensure that they're up to our standard of quality. Our evaluation has shown the AR Gold to be magnificent and we're proud to include them as part of our new product line. One thing that is unusual about these triggers installed in our LaRue PredatOBRs, is they are treated with an IonBond black instead of American Trigger’s normal IonBond Gold. This is a custom color that is only available on LaRue Tactical rifles. These triggers will be standard in the LaRue PredatOBR in both 5.56 and 7.62 caliber.
__________________
Robert
Elite Arms and Supply
1148 S. Main Street, Manteca, CA 95337
209-823-4400


Webstore http://store.elitearmsandsupply.com/
www.facebook.com/elitearmsandsupply

Our new web store is up and running!

Sig Sauer, Glock, Vortex, Kimber, Beretta, Benelli and Wilson Combat Dealers.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 3:25 AM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2016, Calguns.net an Incorporated Company All Rights Reserved.