80% AR lower machining in the Central Valley.

[fourtraxmc]

Still moving ahead. Just trying to figure out the least amount of fixturing and tooling changes. Not sure if we will use one mill for drilling and one for milling. The 3-axis CNC we will be using does not change its own tools. Does any one have a problem with the trigger hole in the bottom the lower being 3/8" instead of 5/16", it would save one tool change and not affect function of lower. You would never know it was not mil. spec unless you had calipers.

[newglockster]

Are you thinking of having a CNC mill for the major cutouts and a drill press for the holes through the sides? Or have the CNC do it all?

Personally, I would much rather have the trigger holes at mil. spec, even if it took a little longer.

[fourtraxmc]

CNC will be used to do the FCG pocket and manual mill will be used to drill the trigger pin, hammer pin and selector holes.

[V8MERC124]

I think my brother and I may be interested being that it is close by. This is really gonna be good for us valley guys. Thanks to you sir.

[fourtraxmc]

Update. Mills got moved into shop now to get them wired up. Slowly but surely!

[newglockster]

!

[fourtraxmc]

Ok, was hoping to have everything ready by the end of the month. It looks like it will be more towards the later part of Dec. I want to make sure there are no issues. I will have raw 80% lowers and lower parts kits available. Be patient guys, I will keep you updated.

[Tim209]

Sounds sweet will stay tuned

[lost.in.cali.]

Im interested as well. ! Im local

[Tim209]

I forgot to ask ... do you have price info yet for the lowers, kits, use of mill ect....thanks

[fourtraxmc]

Nothing set in stone, but should be consistent with pricing from retailers. Time on the mill will be similar.

[tomyboy]

Interested

[DColvin209]

interested also

[Ghostrider Recon.]

Count me in.

[best45auto]

Originally Posted by fourtraxmc

Ok, was hoping to have everything ready by the end of the month. It looks like it will be more towards the later part of Dec. I want to make sure there are no issues. I will have raw 80% lowers and lower parts kits available. Be patient guys, I will keep you updated.

Interested

[dls]

I'd be interested, just need to get my engraving done first.

[dunndeal]

Put me on the list

[jsmith807]

I am in, please let me know

[KAD]

I am intrested in party or appt. either will work for me and a friend

[madscientist]

i'm local too! you can count me in.

[mdib870]

in like flint! count me in

[Zamble]

It's been a couple of weeks since your last post. Any update as to when you will be ready?

[fourtraxmc]

No major update ,still moving forward.

[newglockster]

Any updates?

[fourtraxmc]

Still in a holding pattern. Work ,family and holidays is taking precedence right now.

[fourtraxmc]

Update, hopefully this weekend will get the program written and test run a few lowers. No lowers will be available to purchase at this time. Thanks for your patience!

[newglockster]

[mdib870]

im in forsureabout to be checking this on the daily

[shenphong]

I'd be in, vacationing in Modesto at the family's for the holiday break, would love to get in on this!

[shenphong]

double post

[fourtraxmc]

Had a productive weekend. Machined a couple of lowers and everything turned out pretty good. There are a few small things to work out as far getting everything in line to minimize liabilities. So stay tuned. Sorry about the crappy phone pics.

[DColvin209]

Looking good! Keep us updated i'm in for sure if you get rolling.

[ILVSMOG]

I'd be interested if I could find any 80% lowers to buy!

[fourtraxmc]

Ok guys I am going to move this to the services offered section. I want to make sure I am right with the moderators. Thanks for all your input!