Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > INTERESTS AND ACTIVITIES > Gunsmithing & How To
Register FAQ Members List Calendar Mark Forums Read

Gunsmithing & How To Pro, Amateur & WECSOG and Tutorials, Guides & OLL Build Instructions

Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2011, 12:28 PM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default 80% AR Lower CNC in San Diego

This is not a build party thread. There is nothing for sale in this thread.

If you are interested in an 80% or other products please see my sales threads in the marketplace.

Please try and avoid discussion of group buys here (See above). I'd like to keep this thread in the gunsmithing area

That being said, if you happen to have any AR lowers you've recently finished post up some pictures!

Check it out guys!












__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807



Last edited by lorax3; 01-29-2012 at 11:33 PM..
Reply With Quote
  #2  
Old 03-06-2011, 12:30 PM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default

Questions I often get.
1. Do I need to register it if I build a pistol?

2. Can I register it/should I register it?

3. I know I should put a manufacturer name and city, and SN#, model # and caliber info to prove that its mine.

4. Since I want to build a pistol, once they are finished can I legally buy a pistol upper even though it is not dros'ed.

Answers
1= NO
2= Yes/only if you want to. (no benifit IMHO)
3= Putting info on it is a good idea so you can ID it if it's ever stolen but is not required by law. If you ever wanted to sell it in the future it MUST have City/State, MFG, SER#, MOD, and caliber info engraved in it.
4= Yes. You can also buy a pistol upper before you finsh the 80's if you do not own any AR rifles.

5= I am not a lawyer, this is not legal advice.


More pics to follow as progress allows.
__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807



Last edited by AIMSMALL; 09-21-2011 at 7:59 PM..
Reply With Quote
  #3  
Old 03-06-2011, 3:46 PM
Roccobro Roccobro is offline
Veteran Member
 
Join Date: Feb 2007
Location: By Cal State San Bernardino
Posts: 2,910
iTrader: 62 / 100%
Default

Nice Haas Bro!

Justin
__________________
[SIZE="4]For any questions contact me by email.
Thanks,
Justin[/SIZE]
Quote:
Originally Posted by ar15barrels View Post
Sometimes, arguing just for the sake of arguing, can be fun.
Quote:
Originally Posted by DannyZRC View Post
no it can't!
Quote:
Originally Posted by ar15barrels View Post
YES IT CAN!
"Pink rifle disease... SPREAD IT!"
Reply With Quote
  #4  
Old 03-06-2011, 4:14 PM
Lostsheep's Avatar
Lostsheep Lostsheep is offline
Senior Member
 
Join Date: Aug 2010
Location: 8mi SSE of Drawbridge Ca
Posts: 894
iTrader: 21 / 100%
Default

Is that your mill or did you find someone to rent it out to you?

Either way, that's how you do it. I am curios what your cycle time was for the FCG pocket and trigger slot.

Last edited by Lostsheep; 03-06-2011 at 8:40 PM..
Reply With Quote
  #5  
Old 03-06-2011, 4:14 PM
Colt-45's Avatar
Colt-45 Colt-45 is offline
Calguns Addict
 
Join Date: Sep 2009
Posts: 8,935
iTrader: 131 / 100%
Default

When using a CNC machine, do you still need a jig?
Reply With Quote
  #6  
Old 03-06-2011, 4:54 PM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default

Quote:
Originally Posted by Lostsheep View Post
I that your mill or did you find someone to rent it out to you?

Either way, that's how you do it. I am curios what your cycle time was for the FCG pocket and trigger slot.
15 min for FCG pocket, 5 min for trigger hole, approximately.
__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807


Reply With Quote
  #7  
Old 03-06-2011, 4:56 PM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default

Quote:
Originally Posted by Colt-45 View Post
When using a CNC machine, do you still need a jig?
yes, to hold the lower in the vice, if you look at the pics you can see the jig is in there.
__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807


Reply With Quote
  #8  
Old 03-06-2011, 5:17 PM
G lock's Avatar
G lock G lock is offline
Member
 
Join Date: Nov 2010
Location: Central Province, PRK
Posts: 471
iTrader: 1 / 100%
Default

nice mill, thats like cheating
Reply With Quote
  #9  
Old 03-06-2011, 5:25 PM
tujungatoes's Avatar
tujungatoes tujungatoes is offline
Calguns Addict
 
Join Date: Dec 2006
Location: LA/SFV
Posts: 7,963
iTrader: 37 / 100%
Blog Entries: 2
Default

^I agree. that is cheating....I wanna cheat too
__________________
Quote:
Originally Posted by Dr. Elky View Post
If your a man who wears white sunglasses, your probably a douche bag
Quote:
Originally Posted by CSACANNONEER View Post
I've been know to cross dress and go the other way at certain events.
Reply With Quote
  #10  
Old 03-06-2011, 5:26 PM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default

Quote:
Originally Posted by G lock View Post
nice mill, thats like cheating
No it's not! It's more like an unfair advantage but definately not cheating
__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807


Reply With Quote
  #11  
Old 03-06-2011, 5:50 PM
tujungatoes's Avatar
tujungatoes tujungatoes is offline
Calguns Addict
 
Join Date: Dec 2006
Location: LA/SFV
Posts: 7,963
iTrader: 37 / 100%
Blog Entries: 2
Default

AimSmall, which 80's are you using and where do I get 'em?....group buy!?
__________________
Quote:
Originally Posted by Dr. Elky View Post
If your a man who wears white sunglasses, your probably a douche bag
Quote:
Originally Posted by CSACANNONEER View Post
I've been know to cross dress and go the other way at certain events.
Reply With Quote
  #12  
Old 03-06-2011, 5:55 PM
Roccobro Roccobro is offline
Veteran Member
 
Join Date: Feb 2007
Location: By Cal State San Bernardino
Posts: 2,910
iTrader: 62 / 100%
Default

Quote:
Originally Posted by Norm222 View Post
6 hours on a manual mill vs. 24 min on the cnc. I'll cheat. Thanks for letting me be a part of the first batch. I'll be posting photos of my pistol soon, hopefully.
Your kidding right? I train mechanically DEclined guys, and from start of teaching to finishing doesn't take 3 hours.
__________________
[SIZE="4]For any questions contact me by email.
Thanks,
Justin[/SIZE]
Quote:
Originally Posted by ar15barrels View Post
Sometimes, arguing just for the sake of arguing, can be fun.
Quote:
Originally Posted by DannyZRC View Post
no it can't!
Quote:
Originally Posted by ar15barrels View Post
YES IT CAN!
"Pink rifle disease... SPREAD IT!"

Last edited by lorax3; 01-29-2012 at 10:30 PM..
Reply With Quote
  #13  
Old 03-06-2011, 6:44 PM
ENTHUSIAST's Avatar
ENTHUSIAST ENTHUSIAST is offline
Veteran Member
 
Join Date: Feb 2008
Location: San Diego
Posts: 3,520
iTrader: 91 / 100%
Talking 80% CNC session!!!





__________________
Quote:
America was founded by men who understood that the threat of domestic tyranny is as great as any threat from abroad. If we want to be worthy of their legacy, we must resist the rush toward ever-increasing state control of our society. Otherwise, our own government will become a greater threat to our freedoms than any foreign terrorist.

-Ron Paul

Last edited by lorax3; 01-29-2012 at 10:30 PM..
Reply With Quote
  #14  
Old 03-06-2011, 7:21 PM
E-120's Avatar
E-120 E-120 is offline
Senior Member
 
Join Date: Sep 2008
Location: Sky
Posts: 1,664
iTrader: 56 / 100%
Default

Must do!
__________________
SKS, Lancaster Red AK pistol

http://www.calguns.net/calgunforum/s...php?p=10566996

Ak Parts kit, 80% AR-10
http://www.calguns.net/calgunforum/s...d.php?t=707022
Reply With Quote
  #15  
Old 03-06-2011, 8:16 PM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default

evil huh
__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807


Reply With Quote
  #16  
Old 03-07-2011, 2:09 AM
badicedog's Avatar
badicedog badicedog is offline
Veteran Member
 
Join Date: Jan 2008
Location: Los Alamitos
Posts: 2,954
iTrader: 67 / 99%
Default

Nice job!!!
Reply With Quote
  #17  
Old 03-08-2011, 1:35 PM
E81's Avatar
E81 E81 is offline
Member
 
Join Date: Jan 2011
Location: 925
Posts: 199
iTrader: 13 / 100%
Default

amazing work!
Reply With Quote
  #18  
Old 03-08-2011, 5:18 PM
REDHORSE's Avatar
REDHORSE REDHORSE is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Sep 2002
Location: Inland Empire, San Bernardino County
Posts: 1,439
iTrader: 8 / 100%
Thumbs up

Quote:
Originally Posted by bigboy View Post
++1
++2


Great job yall!
__________________

••• NRA + SAF + CRPA Member
CGF & CGN/CGSSA Recurring Contributor • WEGC Member •••




Last edited by lorax3; 01-29-2012 at 10:30 PM..
Reply With Quote
  #19  
Old 03-08-2011, 5:59 PM
rareair's Avatar
rareair rareair is offline
Senior Member
 
Join Date: Jul 2010
Location: 32° 42′ 54″ N, 117° 9′ 45″ W
Posts: 1,728
iTrader: 50 / 100%
Default

Quote:
Originally Posted by bigboy View Post
++1
++3 I'm expecting an 80% sometime in the next few weeks, ordered one from Roccobro for the March 26th deadline
__________________
MagPul MPLA
POF-USA P415-18-11T-223
SIG 556 SWAT
SIG P226 Navy, W. German P226
P226 Scorpion, P226 X5 Competition
SIG P229 E2
SIG SP2022
TROY M7A1
Reply With Quote
  #20  
Old 03-11-2011, 8:26 AM
Six7onE Six7onE is offline
Junior Member
 
Join Date: Feb 2011
Posts: 30
iTrader: 1 / 100%
Default

++++4 im looking into getting an 80% lower as well
Reply With Quote
  #21  
Old 03-13-2011, 11:10 AM
domack's Avatar
domack domack is offline
Member
CGN Contributor
 
Join Date: Jul 2008
Location: Pedro
Posts: 110
iTrader: 1 / 100%
Default

Looks great, I have some 80% too I'd like to finish...
__________________
‘Cuidich ‘n Ŕgh’
Reply With Quote
  #22  
Old 03-16-2011, 9:30 PM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default

Here's a pic of my most recent build. *Mag is blocked to 10 rounds and baseplate is epoxied on.


__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807



Last edited by lorax3; 01-29-2012 at 10:31 PM..
Reply With Quote
  #23  
Old 03-16-2011, 11:41 PM
bplvr's Avatar
bplvr bplvr is offline
Senior Member
CGN Contributor - Lifetime
 
Join Date: Jun 2008
Location: San Diego, National Socialist Democratic Republic of Facistfornia
Posts: 3,935
iTrader: 30 / 100%
Default

My BRD has been in remission for almost 6 months,then you posted this thread.
I don't have an AR pistol ,but I DO need some.

Two years of BRD counseling and therapy down the drain.
__________________
"America will never be destroyed from the outside.
If we falter and lose our freedoms,it will be because we destroyed ourselves"

-Abraham Lincoln,1862
=======================================
"Revolution against tyranny is the most sacred of duties"
- Benjamin Franklin -1775
=======================================

Last edited by lorax3; 01-29-2012 at 10:31 PM..
Reply With Quote
  #24  
Old 03-16-2011, 11:43 PM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default

Quote:
Originally Posted by bplvr View Post
My BRD has been in remission for almost 6 months,then you posted this thread.
I don't have an AR pistol ,but I DO need some.

Two years of BRD counseling and therapy down the drain.
LOL, HAHAHA With a name like that you knew you'd be back....If you're wife asks how much it was just do what I do and tell her, "about 50 bucks babe", you'll be fine...
PM inbound buddy.
__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807



Last edited by lorax3; 01-29-2012 at 10:32 PM..
Reply With Quote
  #25  
Old 03-16-2011, 11:56 PM
target target is offline
Member
 
Join Date: Sep 2009
Posts: 103
iTrader: 1 / 100%
Default

i've wanted for a long time to try out building one of these 80% lowers but don't really know how to use a mill. i have access to a mini mill but was wondering is it as easy as it looks on the other sites like tactical machining forums? also is it legal to have an angled foregrip on a pistol?
Reply With Quote
  #26  
Old 03-17-2011, 9:45 AM
Roccobro Roccobro is offline
Veteran Member
 
Join Date: Feb 2007
Location: By Cal State San Bernardino
Posts: 2,910
iTrader: 62 / 100%
Default

Target, keep reading. All your answers are in this forum...

Justin
__________________
[SIZE="4]For any questions contact me by email.
Thanks,
Justin[/SIZE]
Quote:
Originally Posted by ar15barrels View Post
Sometimes, arguing just for the sake of arguing, can be fun.
Quote:
Originally Posted by DannyZRC View Post
no it can't!
Quote:
Originally Posted by ar15barrels View Post
YES IT CAN!
"Pink rifle disease... SPREAD IT!"
Reply With Quote
  #27  
Old 03-17-2011, 10:13 AM
Lostsheep's Avatar
Lostsheep Lostsheep is offline
Senior Member
 
Join Date: Aug 2010
Location: 8mi SSE of Drawbridge Ca
Posts: 894
iTrader: 21 / 100%
Default

Quote:
Originally Posted by AIMSMALL

Here's a pic of my most recent build. *Mag is blocked to 10 rounds and baseplate is epoxied on.
Did you do the anodizing yourself? I ask because in your pictures, it appears as though you have a very nice matte finish. Our first round of anodizing produced a much shinier finish than we were aiming for. Do you have any pointers for achieving a matte finish?

And, what's up with your BB? I've never seen a plate like that. Not knocking it, it's just a unique approach.

Last edited by lorax3; 01-29-2012 at 10:33 PM..
Reply With Quote
  #28  
Old 03-17-2011, 11:32 AM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default

The bullet button is pretty sweet, the way it works is you replace your hammer pin with a hollowed out one that's threaded on both sides, then you just bolt the little cover on. The 2nd bolt is a shorter bolt that you use only out of state when you remove the cover. Make sense?
__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807



Last edited by lorax3; 01-29-2012 at 10:33 PM..
Reply With Quote
  #29  
Old 03-17-2011, 11:36 AM
Lostsheep's Avatar
Lostsheep Lostsheep is offline
Senior Member
 
Join Date: Aug 2010
Location: 8mi SSE of Drawbridge Ca
Posts: 894
iTrader: 21 / 100%
Default

Quote:
Originally Posted by AIMSMALL View Post
I didn't do the anodizing however there are plans to start doing it soon with the help of a few key people.
I wish there was an ano shop around me with an ffl07.

Quote:
Originally Posted by AIMSMALL View Post
The bullet button is pretty sweet, the way it works is you replace your hammer pin with a hollowed out one that's threaded on both sides, then you just bolt the little cover on. The 2nd bolt is a shorter bolt that you use only out of state when you remove the cover. Make sense?
I think I'm picking up where your putting down.

Last edited by Lostsheep; 03-18-2011 at 9:36 AM..
Reply With Quote
  #30  
Old 03-17-2011, 4:10 PM
desertdweller's Avatar
desertdweller desertdweller is offline
Member
 
Join Date: Apr 2010
Posts: 270
iTrader: 4 / 100%
Default

Quote:
Originally Posted by Lostsheep View Post
I wish there was an ano shop around me with an ffl07.
Why 07? You've already made it, so it doesn't need a 07. Also, my understanding is if an Ano shop does it for you, you wait there AND it's done on the same day, they don't need to be an FFL holder.
Reply With Quote
  #31  
Old 03-17-2011, 5:29 PM
AIMSMALL's Avatar
AIMSMALL AIMSMALL is offline
Member
CGN Contributor
 
Join Date: May 2010
Location: San Diego, North County
Posts: 2,550
iTrader: 190 / 100%
Default

Quote:
Originally Posted by desertdweller View Post
Why 07? You've already made it, so it doesn't need a 07. Also, my understanding is if an Ano shop does it for you, you wait there AND it's done on the same day, they don't need to be an FFL holder.
This is the way I understand it also however, it is possible to anodize at home, just a bit of a chore though.
__________________
KTO 1911 80% + Rock Island Parts Kits + Aimsmall arms 1911 Jig group buy OPEN
http://www.calguns.net/calgunforum/s...d.php?t=900371

AR15+AR10 80% JIGS in stock
http://www.calguns.net/calgunforum/s...7#post12529807


Reply With Quote
  #32  
Old 03-17-2011, 10:02 PM
bplvr's Avatar
bplvr bplvr is offline
Senior Member
CGN Contributor - Lifetime
 
Join Date: Jun 2008
Location: San Diego, National Socialist Democratic Republic of Facistfornia
Posts: 3,935
iTrader: 30 / 100%
Default

BATFE changed their rules in regards to 'finishing' about 2 months ago.

You will have to hack around to find it. The 07 requirement to do anodizing also allowed dealer samples of FA items ,so I guess they saw the 'problem'.
I picked up on this as I was painting roll marks and needed an 07 to do that !
__________________
"America will never be destroyed from the outside.
If we falter and lose our freedoms,it will be because we destroyed ourselves"

-Abraham Lincoln,1862
=======================================
"Revolution against tyranny is the most sacred of duties"
- Benjamin Franklin -1775
=======================================
Reply With Quote
  #33  
Old 03-18-2011, 9:23 AM
Lostsheep's Avatar
Lostsheep Lostsheep is offline
Senior Member
 
Join Date: Aug 2010
Location: 8mi SSE of Drawbridge Ca
Posts: 894
iTrader: 21 / 100%
Default

Quote:
Originally Posted by bplvr View Post
BATFE changed their rules in regards to 'finishing' about 2 months ago.

You will have to hack around to find it. The 07 requirement to do anodizing also allowed dealer samples of FA items ,so I guess they saw the 'problem'.
I picked up on this as I was painting roll marks and needed an 07 to do that !
what changed exactly? From what to what?

I reserve the right to be completely off the mark here. I was under the impression that an FFL was required because it is the registered part.

Quote:
Originally Posted by aimsmall
This is the way I understand it also however, it is possible to anodize at home, just a bit of a chore though.
I have done this and still have all the equipment/chemicals. And I agree it was a chore and I would much rather pay my regular anodizers the $50 minimum lot charge. Better yet, would be to throw a lower in with a batch of our other parts and get it done for free!


ETA:
I found the atf ruling that you refer to but I am not too sure of it's implications. I read it to say that for some processes, such as anodizing, a manufacturing ffl is not required but a regular dealing ffl license is required. Maybe someone with more developed legal expertise can chime in here. Reading legal jargon makes my head hurt.
http://www.atf.gov/regulations-rulin...ng-2010-10.htm

Last edited by Lostsheep; 03-18-2011 at 2:11 PM..
Reply With Quote
  #34  
Old 03-18-2011, 9:34 AM
nappy's Avatar
nappy nappy is offline
Junior Member
 
Join Date: Mar 2010
Posts: 40
iTrader: 2 / 100%
Default

Are you also set up for .308 lowers??
Reply With Quote
  #35  
Old 03-18-2011, 10:12 AM
desertdweller's Avatar
desertdweller desertdweller is offline
Member
 
Join Date: Apr 2010
Posts: 270
iTrader: 4 / 100%
Default

Quote:
Originally Posted by nappy View Post
Are you also set up for .308 lowers??
If you are talking about AR-10s, we aren't but if you have a JIG I think we can make it work. We got the file we are using for the AR-15 from CNCGuns and they also have an AR-10 file - so I have faith.

Because it will make for a new setup, we might have to make a separate AR-10 day. We can find out when we go there the next time.
Reply With Quote
  #36  
Old 03-18-2011, 12:14 PM
Roccobro Roccobro is offline
Veteran Member
 
Join Date: Feb 2007
Location: By Cal State San Bernardino
Posts: 2,910
iTrader: 62 / 100%
Default

The FCG pocket on the AR-10's are IDENTICAL to the .223 sized lowers. It's just not as close to the buffer tube. I have faith you guys will git 'er done as well.

Justin
__________________
[SIZE="4]For any questions contact me by email.
Thanks,
Justin[/SIZE]
Quote:
Originally Posted by ar15barrels View Post
Sometimes, arguing just for the sake of arguing, can be fun.
Quote:
Originally Posted by DannyZRC View Post
no it can't!
Quote:
Originally Posted by ar15barrels View Post
YES IT CAN!
"Pink rifle disease... SPREAD IT!"
Reply With Quote
  #37  
Old 03-18-2011, 1:16 PM
desertdweller's Avatar
desertdweller desertdweller is offline
Member
 
Join Date: Apr 2010
Posts: 270
iTrader: 4 / 100%
Default

Quote:
Originally Posted by Roccobro View Post
The FCG pocket on the AR-10's are IDENTICAL to the .223 sized lowers. It's just not as close to the buffer tube. I have faith you guys will git 'er done as well.

Justin
Beautiful!! I guess we have that answer now. Just need a JIG still.
Reply With Quote
  #38  
Old 03-18-2011, 2:19 PM
Roccobro Roccobro is offline
Veteran Member
 
Join Date: Feb 2007
Location: By Cal State San Bernardino
Posts: 2,910
iTrader: 62 / 100%
Default

If only you were closer....

I have a GB deal on the jigs if anyone is interested. GB ends the 26th.

Justin
__________________
[SIZE="4]For any questions contact me by email.
Thanks,
Justin[/SIZE]
Quote:
Originally Posted by ar15barrels View Post
Sometimes, arguing just for the sake of arguing, can be fun.
Quote:
Originally Posted by DannyZRC View Post
no it can't!
Quote:
Originally Posted by ar15barrels View Post
YES IT CAN!
"Pink rifle disease... SPREAD IT!"
Reply With Quote
  #39  
Old 03-19-2011, 7:18 PM
dirtgimp dirtgimp is offline
Junior Member
 
Join Date: Jan 2010
Location: BAKERSFIELD
Posts: 20
iTrader: 0 / 0%
Default

thinking about it and waiting for an answer . . . . .
Reply With Quote
  #40  
Old 03-20-2011, 6:02 AM
mikaarce's Avatar
mikaarce mikaarce is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Jul 2010
Location: North county, San Diego
Posts: 974
iTrader: 18 / 100%
Default

Tempting!
__________________
My AR is "disabled"
"Differently abled AR"
"AR with disability"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 4:02 AM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2016, Calguns.net an Incorporated Company All Rights Reserved.