Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > FIREARMS DISCUSSIONS > Rimfire Firearms
Register FAQ Members List Calendar Mark Forums Read

Rimfire Firearms .22, .17 and other Rimfire Handguns and Rifles

Reply
 
Thread Tools Display Modes
  #441  
Old 01-21-2010, 3:43 PM
polygunner polygunner is offline
Member
 
Join Date: Oct 2006
Location: East bay
Posts: 405
iTrader: 14 / 100%
Default

My 795 has problems also.
Seems that the chamber is too small.
I can only extract a live round with one type of ammo. It goes in snug but can be extracted.
Other ammo goes in tight and if it doesn't fire I need to use a small screw driver to pry it out.

Eventually the chamber will wear and it will accept all ammo but that will take many thousands of rounds.

I think the fix is to send it back to Marlin or get a .22lr chamber reamer and do it your self.

It's only 1 or 2 thousandths too small but that's all it takes.

On the other hand when it works right it's super accurate.

pg
Reply With Quote
  #442  
Old 01-21-2010, 3:49 PM
ae13291 ae13291 is offline
Senior Member
 
Join Date: May 2009
Location: san fernando valley,CA
Posts: 556
iTrader: 2 / 100%
Default

the only time i get a jam is when the shell is on its way out, ^^^ like the post above the shell gets caught with the new bullet already in the chamber. i have to use my car key to pull it out. i also found it to jam much less when i used alot less oil. i use 4 drops of break free and spread it all around with my finger.
Reply With Quote
  #443  
Old 01-22-2010, 4:48 PM
Stormtrooperthunder's Avatar
Stormtrooperthunder Stormtrooperthunder is offline
Member
 
Join Date: Apr 2009
Location: San Jose
Posts: 381
iTrader: 10 / 100%
Default

so my 795 is having some problems. I took it shooting last weekend and my friends and I could not hit where we were aiming. seemed to be shooting too low. could someone help me diagnose this problem?
Reply With Quote
  #444  
Old 01-22-2010, 5:58 PM
otteray otteray is offline
Veteran Member
 
Join Date: Feb 2006
Location: Santa Cruz & Lake Tahoe
Posts: 2,690
iTrader: 6 / 100%
Default

Red Dot adjustments? Scope base and/or rings secure? Open sight elevation? Peep sight elevation? Front blade height? What ammo? What advertised velocity from ammo? Standard Velocity? Hi-speed? Target distance? Sighting in distance? Offhhand or benchrest? Buttstock firmly planted on shoulder? Stock assembled so that barrel is not making unnecessary contact? Rainy/Windy?

Need more info.
__________________
Reply With Quote
  #445  
Old 01-22-2010, 6:14 PM
Stormtrooperthunder's Avatar
Stormtrooperthunder Stormtrooperthunder is offline
Member
 
Join Date: Apr 2009
Location: San Jose
Posts: 381
iTrader: 10 / 100%
Default

oh the standard irons and im using federal bulk ammo 36gr 1260fps and i was shooting at 50yrds bench rest. firms against shoulder and there was some rain.

i just noticed that you can adjust the rear sight and my friend just told me he was messing around with it. what notch should i put it at?

edit: how do i check if the barrel isnt making any unnecessary contact

Last edited by Stormtrooperthunder; 01-22-2010 at 6:32 PM..
Reply With Quote
  #446  
Old 01-22-2010, 8:02 PM
otteray otteray is offline
Veteran Member
 
Join Date: Feb 2006
Location: Santa Cruz & Lake Tahoe
Posts: 2,690
iTrader: 6 / 100%
Default

If it is a typical, inexpensive Buckhorn style rear leaf sight, setting it to a higher notch will make the rifle shoot aim higher.

Read this:

http://www.snipershide.com/forum/ubb...Number=1506070

With your plastic stock it probably is not making unnecessary contact, I'd guess.
__________________

Last edited by otteray; 01-22-2010 at 8:10 PM..
Reply With Quote
  #447  
Old 01-24-2010, 8:14 PM
Beetle Bailey's Avatar
Beetle Bailey Beetle Bailey is offline
Senior Member
 
Join Date: Apr 2004
Posts: 2,145
iTrader: 10 / 100%
Default

Well, I picked up my Marlin 795 yesterday, field stripped it, and cleaned out all the grease. The internals got a light coat of CLP. I didn't touch any of the "E-clips" so reassembly was a breeze. Then I couldn't resist anymore, so I checked the mag-well and the chamber, then tested the trigger to see how it was. Nothing. So I checked the safety and it was off. Still nothing.

So I figured I must have messed up and field stripped it again. After playing with the FCG for awhile, I finally figured out there is a magazine disconnect that does not allow the gun to fire without a magazine inserted, kinda like a BHP. I remember thinking to myself "Thank God nobody was around to see me make a fool of myself. . . " So I get the thing back together and dry-fire it. I know you aren't supposed to dry-fire a rimfire, but I couldn't resist it just once . Anyways, it was long and heavy, but it broke clean. Besides, I own a couple of Mosin Nagants, so I've worked with less.

So today I was at Angeles Shooting Range to test out my handy little Marlin, as well as check zero on a few hunting rifles. Well, I am happy to report that there was no drama; the Marlin ate up 333 rounds (one box) of Winchester 36 grain HP and 106 rounds of Federal 40 grain solids without any issues whatsoever. I didn't shoot for groups since I was kinda busy with my centerfire rifles but I did confirm that the stock iron sights had me shooting about one inch to the right at 25 yards. I figure when I get around to mounting a scope on it, I'll dedicate some time to putting it on paper and really seeing what it can do.

It was fun blazing away at steel targets and the gun kept up with me the whole time. It's not a finely crafted work of art (the barrel seemed like the most high quality part) but it got the job done and at a very good price. I am happy with my purchase and look forward to getting years of good service from the little blaster. Thanks for reading.
Reply With Quote
  #448  
Old 01-24-2010, 10:45 PM
Stormtrooperthunder's Avatar
Stormtrooperthunder Stormtrooperthunder is offline
Member
 
Join Date: Apr 2009
Location: San Jose
Posts: 381
iTrader: 10 / 100%
Default

went to to range and zeroed in my scope, but in the process i cut my thumb up pretty badly while loading the magazine.

so im wondering, would this work with the 795 magazine?
http://www.cheaperthandirt.com/ItemD...px?sku=GNS-127

thanks in advance
Reply With Quote
  #449  
Old 01-24-2010, 11:10 PM
caoboy caoboy is offline
Senior Member
 
Join Date: May 2009
Location: Modesto
Posts: 2,412
iTrader: 14 / 100%
Default

Nope! That's only for the Ruger MK series, and I think the browning buckmarks.

You will have to get used to loading the mags.

To lessen your chances of cutting your thumbs, buy more mags! I have 3 now, and it definitely helps with not having to reload the mags as often.
Reply With Quote
  #450  
Old 01-25-2010, 9:07 AM
Beetle Bailey's Avatar
Beetle Bailey Beetle Bailey is offline
Senior Member
 
Join Date: Apr 2004
Posts: 2,145
iTrader: 10 / 100%
Default

Yeah, loading the magazines suck. When I told my shooting buddy I shot the entire bulk pack of Winchester .22lr, the first thing he said was "What? You loaded the magazines that many times?" Thumb is a bit sore, but I am still happy with my new rifle.
Reply With Quote
  #451  
Old 01-25-2010, 10:19 AM
Gillis Gillis is offline
Junior Member
 
Join Date: Oct 2009
Location: Antelope Valley
Posts: 10
iTrader: 0 / 0%
Default

Quote:
Originally Posted by Stormtrooperthunder View Post
went to to range and zeroed in my scope, but in the process i cut my thumb up pretty badly while loading the magazine.

so im wondering, would this work with the 795 magazine?
http://www.cheaperthandirt.com/ItemD...px?sku=GNS-127

thanks in advance
Tore my thumb up pretty good at my last appleseed shoot, wanna get one of these when they are available. There is a video clip at the bottom of the page.

BabyUpLULA
http://maglula.tripod.com/BabyUpLULA.htm

Last edited by Gillis; 01-25-2010 at 10:21 AM.. Reason: you tube problem
Reply With Quote
  #452  
Old 01-25-2010, 12:48 PM
ae13291 ae13291 is offline
Senior Member
 
Join Date: May 2009
Location: san fernando valley,CA
Posts: 556
iTrader: 2 / 100%
Default

Quote:
Originally Posted by Beetle Bailey View Post
Well, I picked up my Marlin 795 yesterday, field stripped it, and cleaned out all the grease. The internals got a light coat of CLP. I didn't touch any of the "E-clips" so reassembly was a breeze. Then I couldn't resist anymore, so I checked the mag-well and the chamber, then tested the trigger to see how it was. Nothing. So I checked the safety and it was off. Still nothing.

So I figured I must have messed up and field stripped it again. After playing with the FCG for awhile, I finally figured out there is a magazine disconnect that does not allow the gun to fire without a magazine inserted, kinda like a BHP. I remember thinking to myself "Thank God nobody was around to see me make a fool of myself. . . " So I get the thing back together and dry-fire it. I know you aren't supposed to dry-fire a rimfire, but I couldn't resist it just once . Anyways, it was long and heavy, but it broke clean. Besides, I own a couple of Mosin Nagants, so I've worked with less.

So today I was at Angeles Shooting Range to test out my handy little Marlin, as well as check zero on a few hunting rifles. Well, I am happy to report that there was no drama; the Marlin ate up 333 rounds (one box) of Winchester 36 grain HP and 106 rounds of Federal 40 grain solids without any issues whatsoever. I didn't shoot for groups since I was kinda busy with my centerfire rifles but I did confirm that the stock iron sights had me shooting about one inch to the right at 25 yards. I figure when I get around to mounting a scope on it, I'll dedicate some time to putting it on paper and really seeing what it can do.

It was fun blazing away at steel targets and the gun kept up with me the whole time. It's not a finely crafted work of art (the barrel seemed like the most high quality part) but it got the job done and at a very good price. I am happy with my purchase and look forward to getting years of good service from the little blaster. Thanks for reading.


great im thinking about heading over to angeles crest right now
Reply With Quote
  #453  
Old 01-26-2010, 1:43 AM
CalNRA's Avatar
CalNRA CalNRA is offline
Calguns Addict
 
Join Date: Apr 2006
Posts: 8,460
iTrader: 12 / 100%
Default

Quote:
Originally Posted by Beetle Bailey View Post
It's not a finely crafted work of art (the barrel seemed like the most high quality part) but it got the job done and at a very good price.
yep.

The best thing Marlin going for them is the microgroove rimfire barrels.
__________________
Note: I do not work for NRA and am not on their payroll in any shape or form. My opinion represents no one other than myself.

Why CA gun rights needs more work:

Quote:
Originally Posted by Booshanky View Post
I'll say it for the 50th time. I AM NOT A SINGLE ISSUE VOTER.
I'm a freakin socialist for christs sake. I'm not going to vote for some republican just so he can funnel even more money to the oligarchs that run this country, just because he's pro 2a.
Reply With Quote
  #454  
Old 02-03-2010, 9:22 AM
longhairchris's Avatar
longhairchris longhairchris is offline
Member
 
Join Date: Oct 2009
Location: Ventura County CA
Posts: 288
iTrader: 0 / 0%
Default

Just got my 795 back from warranty service. I had a lot of failure to fire and failure to extract issues. I called Marlin headquarters, they told me to send it to J&G gunsmithing in Granite Bay, CA because they are authorized to do warranty work. It was turned around and back to me in a week. My chamber had to be refitted (too tight) and the bolt was adjusted because it wasn't closing all the way. I'll probably take it out next week and see if the problems are cleared up.

I know some of you out there have had similar issues, so if you have some time left on your 5 year warranty, give Marlin a call.

I wish the quality control was a little tighter at the factory, but I realize that they can't catch everything.

My one complaint is that it wasn't shipped back to me requiring a signature, and the UPS guy left it on my front porch. Arrrrrrrr......
Reply With Quote
  #455  
Old 02-03-2010, 9:49 AM
polygunner polygunner is offline
Member
 
Join Date: Oct 2006
Location: East bay
Posts: 405
iTrader: 14 / 100%
Default

My 2 are there now, they have the same problem as yours.
1 week turn around is pretty good. They told me 2 weeks and I took mine to them, no shipping.
pg
Reply With Quote
  #456  
Old 02-04-2010, 10:18 AM
Deadbolt's Avatar
Deadbolt Deadbolt is offline
CGSSA Associate
 
Join Date: Dec 2009
Posts: 6,589
iTrader: 3 / 100%
Default

Just joined the 795 club!

Shes out of jail on Valentines

Edit: Also - whats the deal on cleaning these things? the barrel is so small, can I just hose the whole (action / receiver / bolt / barrel ) thing down with break free and call it "done" ?
Reply With Quote
  #457  
Old 02-04-2010, 1:59 PM
kpw001 kpw001 is offline
Member
 
Join Date: Aug 2007
Location: Riverside
Posts: 244
iTrader: 9 / 100%
Default

Quote:
Originally Posted by Gillis View Post
Tore my thumb up pretty good at my last appleseed shoot, wanna get one of these when they are available. There is a video clip at the bottom of the page.

BabyUpLULA
http://maglula.tripod.com/BabyUpLULA.htm
I am buying that as soon as it hits the market. I love my 795 but after shooting through a few hundred rounds the thumbs do ache a bit. I love the upLULA for my pistol mags, so looking forward to this new product.
Reply With Quote
  #458  
Old 02-05-2010, 8:19 AM
Capt Jack's Avatar
Capt Jack Capt Jack is offline
Senior Member
 
Join Date: Jan 2008
Location: Paso Robles, CA
Posts: 812
iTrader: 8 / 100%
Default

Quote:
Originally Posted by Deadbolt View Post
Just joined the 795 club!

Shes out of jail on Valentines

Edit: Also - whats the deal on cleaning these things? the barrel is so small, can I just hose the whole (action / receiver / bolt / barrel ) thing down with break free and call it "done" ?
That will pretty much do it. Every once in a while, it wouldn't hurt to strip it down and do a good cleaning, but .22s seem to be able to get a bit dirty and keep going. Oh, I also use a bore snake on mine and the barrel is nice and shiney! I know some people like the rod, but mine does not seem to mind just getting the snake!

Best of luck!
Reply With Quote
  #459  
Old 02-05-2010, 10:06 PM
lugee lugee is online now
Senior Member
 
Join Date: Jun 2006
Location: Mission Viejo, CA
Posts: 1,092
iTrader: 200 / 100%
Default

Quote:
Originally Posted by kpw001 View Post
I am buying that as soon as it hits the market. I love my 795 but after shooting through a few hundred rounds the thumbs do ache a bit. I love the upLULA for my pistol mags, so looking forward to this new product.
I started bringing a pair of mechanics gloves to load the mags on my girlfriends 795, it really helps with the thumbs and makes it easier to load.
__________________
NRA Life Member

How to ID a real VLTOR EMOD versus a Replica
Reply With Quote
  #460  
Old 02-11-2010, 9:29 PM
The Tech-1's Avatar
The Tech-1 The Tech-1 is offline
Member
 
Join Date: Jan 2009
Location: Kingwood, TX
Posts: 294
iTrader: 33 / 100%
Default

So I finally cleaned and oiled my Marlin 795 that I bought back on black friday lol. Yea I've been busy.

So looking at the stock sights, looks like Im not really going to want to bother with them straight from the get go.

Id prefer the scope be able to hold zero, crosshairs stay perpendicular and good clarity. It's mostly for plinking at the range 25-100yds max. Pretty much looking to be under $50

Any of you guys use these? Pretty much what Im looking at right now.

http://www.walmart.com/ip/Tasco-Pron...-Matte/5684954

http://www.walmart.com/ip/Barska-Pli...C10380/4634048

http://www.opticsplanet.net/simmons-...pe-510524.html
Reply With Quote
  #461  
Old 02-11-2010, 10:36 PM
RawImpact's Avatar
RawImpact RawImpact is offline
Senior Member
 
Join Date: Oct 2009
Location: Orange County
Posts: 729
iTrader: 10 / 100%
Default

iron sights are horrible imo... the whole thing was off for me. I bought a cheap NC star (i believe) off of ebay, tried zeroing it without a benchtop and it was off pretty bad. I will properly zero tomorrow and hope to have some groupings i can show off :-). My rifle has 1,020 rounds through it so it's still fairly new.

Not the best scope, not the best rifle, not the best caliber but the most affordable setup at under $200.00 OTD.
__________________

**If i am missing a location or want to edit a location, PM me!**
Reply With Quote
  #462  
Old 02-11-2010, 10:52 PM
wboughton wboughton is offline
Member
 
Join Date: Oct 2008
Location: Chico/Modesto
Posts: 119
iTrader: 0 / 0%
Default

Maybe I just got lucky, because I went through about 550 rounds of .22lr in 2 magazines in a few days and my thumbs were fine. Maybe I just have thick thumb skin???
Reply With Quote
  #463  
Old 02-11-2010, 11:18 PM
The Tech-1's Avatar
The Tech-1 The Tech-1 is offline
Member
 
Join Date: Jan 2009
Location: Kingwood, TX
Posts: 294
iTrader: 33 / 100%
Default

Quote:
Originally Posted by RawImpact View Post
iron sights are horrible imo... the whole thing was off for me. I bought a cheap NC star (i believe) off of ebay, tried zeroing it without a benchtop and it was off pretty bad. I will properly zero tomorrow and hope to have some groupings i can show off :-). My rifle has 1,020 rounds through it so it's still fairly new.

Not the best scope, not the best rifle, not the best caliber but the most affordable setup at under $200.00 OTD.
Yea they look like complete garbage. Id rather not even bother trying to sight it in with the stocks and then again with a scope. I'll just do it once with a scope lol.

I agree it's definitely affordable, got mine for $99 after the mail in rebate so im thrilled. Also mine wasnt really all that dirty out of the box like some here said.
Reply With Quote
  #464  
Old 02-11-2010, 11:54 PM
caoboy caoboy is offline
Senior Member
 
Join Date: May 2009
Location: Modesto
Posts: 2,412
iTrader: 14 / 100%
Default

Quote:
Originally Posted by wboughton View Post
Maybe I just got lucky, because I went through about 550 rounds of .22lr in 2 magazines in a few days and my thumbs were fine. Maybe I just have thick thumb skin???
Mine are fine, and I have 3 mags, and have shot a few thousand rounds out of them so far.
Reply With Quote
  #465  
Old 02-12-2010, 12:57 AM
gixxer750 gixxer750 is offline
Member
 
Join Date: Aug 2009
Location: Hesperia
Posts: 186
iTrader: 0 / 0%
Default

Does anyone know why the manual says not to shoot hyper velocity round's?
Reply With Quote
  #466  
Old 02-12-2010, 3:52 AM
shooterdude's Avatar
shooterdude shooterdude is offline
Senior Member
 
Join Date: Dec 2009
Location: Los Angeles
Posts: 844
iTrader: 3 / 100%
Default

Quote:
Originally Posted by Capt Jack View Post
That will pretty much do it. Every once in a while, it wouldn't hurt to strip it down and do a good cleaning, but .22s seem to be able to get a bit dirty and keep going. Oh, I also use a bore snake on mine and the barrel is nice and shiney! I know some people like the rod, but mine does not seem to mind just getting the snake!

Best of luck!
+1 for the bore snake.
__________________
Using C Products 10 round magazines in my AR-15...just to be "safe"...
Reply With Quote
  #467  
Old 02-13-2010, 4:37 PM
The Tech-1's Avatar
The Tech-1 The Tech-1 is offline
Member
 
Join Date: Jan 2009
Location: Kingwood, TX
Posts: 294
iTrader: 33 / 100%
Default

Quote:
Originally Posted by The Tech-1 View Post
So I finally cleaned and oiled my Marlin 795 that I bought back on black friday lol. Yea I've been busy.

So looking at the stock sights, looks like Im not really going to want to bother with them straight from the get go.

Id prefer the scope be able to hold zero, crosshairs stay perpendicular and good clarity. It's mostly for plinking at the range 25-100yds max. Pretty much looking to be under $50

Any of you guys use these? Pretty much what Im looking at right now.

http://www.walmart.com/ip/Tasco-Pron...-Matte/5684954

http://www.walmart.com/ip/Barska-Pli...C10380/4634048

http://www.opticsplanet.net/simmons-...pe-510524.html
Anybody?
Reply With Quote
  #468  
Old 02-13-2010, 9:09 PM
USGI USGI is offline
Junior Member
 
Join Date: Dec 2009
Location: Northern Oregon
Posts: 87
iTrader: 0 / 0%
Default

They're under $95 at Sports Authority this weekend - after $25 mail in rebate. Only problem for me is a 140 mile round trip.
Reply With Quote
  #469  
Old 02-13-2010, 10:32 PM
vinny_land's Avatar
vinny_land vinny_land is offline
Senior Member
 
Join Date: Dec 2007
Location: Bakersfield
Posts: 2,277
iTrader: 10 / 100%
Default

Quote:
Originally Posted by USGI View Post
They're under $95 at Sports Authority this weekend - after $25 mail in rebate. Only problem for me is a 140 mile round trip.
I think this is gonna be an impulse buy for me. Do you know when this sale ends? Besides I don't have a 22lr in my collection.
__________________
"1911 mag, twinkie, twinkie, cupcake, primary weapon mag"

AR's gone through it's final evolution...for now: Precision rig & close encounters
http://www.calguns.net/calgunforum/s...&postcount=460

shuttlecock
Reply With Quote
  #470  
Old 02-14-2010, 5:05 PM
USGI USGI is offline
Junior Member
 
Join Date: Dec 2009
Location: Northern Oregon
Posts: 87
iTrader: 0 / 0%
Default

Quote:
Originally Posted by vinny_land View Post
I think this is gonna be an impulse buy for me. Do you know when this sale ends? Besides I don't have a 22lr in my collection.
The ad in our paper here in OR says the deal is good through the 20th of Feb. Hope you are able to get one!
Reply With Quote
  #471  
Old 02-17-2010, 9:45 PM
ae13291 ae13291 is offline
Senior Member
 
Join Date: May 2009
Location: san fernando valley,CA
Posts: 556
iTrader: 2 / 100%
Default

i notice that the bolt is wearing only one side of the receiver, you can only see this when the bolt is removed anybody else have this issue? or is it only me? i have a couple thousand rounds through it
Reply With Quote
  #472  
Old 02-18-2010, 12:40 AM
caoboy caoboy is offline
Senior Member
 
Join Date: May 2009
Location: Modesto
Posts: 2,412
iTrader: 14 / 100%
Default

Is it wearing off the black finish on the inside of the receiver? Mine is flaking off it seems. I figure keeping it oiled and clean should be fine.
Reply With Quote
  #473  
Old 02-19-2010, 12:47 AM
ae13291 ae13291 is offline
Senior Member
 
Join Date: May 2009
Location: san fernando valley,CA
Posts: 556
iTrader: 2 / 100%
Default

^^ yea its wearing off the black but the weird thing is its only on one side only the other side has the full black coating. everytime i oil and clean mine it starts to jamm, i love to lube things too much
Reply With Quote
  #474  
Old 02-22-2010, 11:36 AM
xtian13 xtian13 is offline
Member
 
Join Date: Jan 2010
Posts: 106
iTrader: 1 / 100%
Default

i'm in my 10-day wait period for my 795. can anyone recommend a decent affordable bag/case for my rifle?
Reply With Quote
  #475  
Old 02-22-2010, 11:48 AM
jonni's Avatar
jonni jonni is offline
Senior Member
 
Join Date: Apr 2009
Location: socal
Posts: 606
iTrader: 3 / 100%
Default

Quote:
Originally Posted by xtian13 View Post
i'm in my 10-day wait period for my 795. can anyone recommend a decent affordable bag/case for my rifle?
I just went to turners and found one for $5. You should check big5 as well
__________________
WTB: Yugo 7.62x39, 22lr, Finnish M28/39

"I don't know we made brownies. And I think we're dead. Time is going by really really really really slow."

-Former cop, http://www.youtube.com/watch?v=hnZb5wi_jsU
Reply With Quote
  #476  
Old 02-22-2010, 12:56 PM
Joe22 Joe22 is offline
Senior Member
 
Join Date: Sep 2009
Location: Galt (Between Sac and Stockton)
Posts: 928
iTrader: 80 / 100%
Default

Walmart has tons to pick from for $10 and $20... Atleast mine does..
Reply With Quote
  #477  
Old 02-22-2010, 6:09 PM
Capt Jack's Avatar
Capt Jack Capt Jack is offline
Senior Member
 
Join Date: Jan 2008
Location: Paso Robles, CA
Posts: 812
iTrader: 8 / 100%
Default

+1 on Walmart. I found a nice Remington rifle bag for $10. Before that, I just kept it in rifle sleeve treated with silicone which worked fine too.
Reply With Quote
  #478  
Old 02-22-2010, 6:28 PM
afro's Avatar
afro afro is offline
Senior Member
 
Join Date: Mar 2009
Location: Sacramento, CA
Posts: 749
iTrader: 10 / 100%
Default

Any lefties have problems with ejected casings hitting your wrist?
Reply With Quote
  #479  
Old 02-22-2010, 11:48 PM
caoboy caoboy is offline
Senior Member
 
Join Date: May 2009
Location: Modesto
Posts: 2,412
iTrader: 14 / 100%
Default

Quote:
Originally Posted by afro View Post
Any lefties have problems with ejected casings hitting your wrist?
Nope! What ammo are you shooting? I mostly use CCI Mini/Blazer. Don't have any problems.
Reply With Quote
  #480  
Old 02-23-2010, 9:46 AM
afro's Avatar
afro afro is offline
Senior Member
 
Join Date: Mar 2009
Location: Sacramento, CA
Posts: 749
iTrader: 10 / 100%
Default

Been shooting Minimags. Every now and then one will hit my wrist. Doesn't hurt or anything.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 6:49 AM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2016, Calguns.net an Incorporated Company All Rights Reserved.