Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > FIREARMS DISCUSSIONS > Centerfire Rifles - Semiautomatic or Gas Operated
Register FAQ Members List Calendar Mark Forums Read

Centerfire Rifles - Semiautomatic or Gas Operated Centerfire rifles, carbines and other gas operated rifles.

Reply
 
Thread Tools Display Modes
  #1  
Old 09-14-2021, 11:09 AM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Default My idea of the Perfect Mini-14...the project continues.

(Disclamer: This is not a Mini is better than AR15 or AK47 platform thread. I have two AR15s, one AK, a Mini-30, and a Mini-14! It is merely my opinion of what I think is the perfect Mini-14)

The current Mini-14 Tactical Models are close to my idea of the "Perfect" Mini. Problem is, they are 1/9 twist, not 1/7 (like the Mid-80 to 90-s Minis) so do not get the most out of the 5.56 MK262 MOD1 77 grainers. I like their sights, and they take Ruger rings, so you don't need scout mount or wobbly side plate mount. Also the current tacticals are only 16" barrels. The 18 inch barrels really maximizes the 77s, or 55s for that matter.

There are old GB models out there that come close with 1/7 barrels and thread with good sights. They limit you to scout mounts or side-plate mounts, which as a rule do not hold zero.

With this in mind, after going through several Minis, I have decide to create my "perfect Mini".

More pics to come.

Requirements:

1) Stainless steel construction

2). 1/7 twist for MK262 MOD1 77 grain OTMs

3) Ability to use quick release Ruger factory type scope rings like current 580 series

4). adjustable rear ghost ring sight.

5). Post and wing front sight (M1/M16 style).

6). Poly stock (though wood with a wood handguard is sexier)

I started with a 1989 vintage Ruger Ranch rifle, as it has the ability to take scopes and has a 1/7 twist barrel.



The mile high front blade sight had to go, as did the stupid folding leaf rear. Initially I used a post and wing front sight cut from a Choate fronyt sight/flash hider combo, and a Tech Sight ghost ring rear.







Most of the way there. I have now added a Accustrut "Socom" single clamp strut to give the barrel a tad more stability for shooting distance with a scope. Without the strut, I can break clay pigeons on the 100 yard berm from a rest with iron sights, so it has practicl accuracy. As for the front sight, I did locate a factory .562 ID 580 series front sight that I am going to use. I am also going to thread the barrel 9/16x24 the same as the original Mini-14 GB models were, and add a brake. I have a nice A2 style muzzle brake (actual brake) that is threaded 1/2x28 that I am going to hog out and thread 9/16x24. Finally I also have a poly stock on the way.

Last edited by imarangemaster; 09-14-2021 at 11:19 AM..
Reply With Quote
  #2  
Old 09-14-2021, 3:10 PM
FeuerFrei's Avatar
FeuerFrei FeuerFrei is offline
Calguns Addict
 
Join Date: Aug 2008
Location: sign said "Abandon all hope, ye who enter here"
Posts: 6,367
iTrader: 0 / 0%
Default

OK. Another Mini-Me mod project. Nice anti flack disclaimer.

Might I suggest a gas bushing swap? Start small and open it up with drill bits as needed. I don't have to say that it's removal is required to do this. Right?
It sure keeps empties out of low orbit. Cycles smoother too.

Mini-Me rifles are great for their design purpose. You'll get no grief from me on this.
__________________
"Find out just what the people will submit to and you have found out the exact amount of injustice and wrong which will be imposed upon them and these will continue until they are resisted with either words or blows, or with both. The limits of tyrants are prescribed by the endurance of those whom they oppress."
-- Frederick Douglass --

“I didn’t know I was a slave until I found out I couldn’t do the things I wanted.”
– Frederick Douglass --
Reply With Quote
  #3  
Old 09-14-2021, 3:27 PM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Talking

Quote:
Originally Posted by FeuerFrei View Post
OK. Another Mini-Me mod project. Nice anti flack disclaimer.

Might I suggest a gas bushing swap? Start small and open it up with drill bits as needed. I don't have to say that it's removal is required to do this. Right?
It sure keeps empties out of low orbit. Cycles smoother too.

Mini-Me rifles are great for their design purpose. You'll get no grief from me on this.
Thanks! Minis are over gassed like AKs. As a result, it cycles ANYTHING! I had some 4298 5.56 reloads that would not cycle in my ARs, but the Mini gobbled them up. I have used smaller bushings on earlier Minis, but for now I am, running this one wide open so I can feed it anything...
Reply With Quote
  #4  
Old 09-14-2021, 3:32 PM
NorCalRefuge's Avatar
NorCalRefuge NorCalRefuge is offline
Senior Member
 
Join Date: Aug 2018
Posts: 588
iTrader: 2 / 100%
Default

That's one of the beautiful things about the mini - the overgasing. Like imarangemaster said, it cycles anything!

The strut is real nice for the pencil barrels, from what I've heard. They look sweet too! Add a pic soon!

I also have the tech sight rear iron on mine - love it. A huge improvement over factory.
Reply With Quote
  #5  
Old 09-14-2021, 3:45 PM
FeuerFrei's Avatar
FeuerFrei FeuerFrei is offline
Calguns Addict
 
Join Date: Aug 2008
Location: sign said "Abandon all hope, ye who enter here"
Posts: 6,367
iTrader: 0 / 0%
Default

Quote:
Originally Posted by imarangemaster View Post
Thanks! Minis are over gassed like AKs. As a result, it cycles ANYTHING! I had some 4298 5.56 reloads that would not cycle in my ARs, but the Mini gobbled them up. I have used smaller bushings on earlier Minis, but for now I am, running this one wide open so I can feed it anything...
Not suggesting you make the thing unreliable. Just saying you can keep the reliability and slow down the bolt speed enough so locating empties is less of an Easter egg hunt.

Going small and sneaking up on the sweet spot will pay dividends. Just buy the smallest and work it as needed. .045 is a great place to start for wolf/pmc.
__________________
"Find out just what the people will submit to and you have found out the exact amount of injustice and wrong which will be imposed upon them and these will continue until they are resisted with either words or blows, or with both. The limits of tyrants are prescribed by the endurance of those whom they oppress."
-- Frederick Douglass --

“I didn’t know I was a slave until I found out I couldn’t do the things I wanted.”
– Frederick Douglass --
Reply With Quote
  #6  
Old 09-14-2021, 3:54 PM
NorCalRefuge's Avatar
NorCalRefuge NorCalRefuge is offline
Senior Member
 
Join Date: Aug 2018
Posts: 588
iTrader: 2 / 100%
Default

Accuracy Systems, the same guys that make the original struts, also make a nice adjustable gas block. Saves time removing the thing and changing bushings a bunch... plus you could crank the gas back wide open if you get some troublesome ammo.
Reply With Quote
  #7  
Old 09-14-2021, 4:01 PM
jarhead714 jarhead714 is online now
Calguns Addict
 
Join Date: Dec 2012
Location: The County Seat
Posts: 5,405
iTrader: 16 / 100%
Default

Quote:
Originally Posted by NorCalRefuge View Post
Accuracy Systems, the same guys that make the original struts, also make a nice adjustable gas block. Saves time removing the thing and changing bushings a bunch... plus you could crank the gas back wide open if you get some troublesome ammo.
There’s not much troublesome ammunition with Minis. Only troublesome magazines.
Reply With Quote
  #8  
Old 09-14-2021, 4:06 PM
NorCalRefuge's Avatar
NorCalRefuge NorCalRefuge is offline
Senior Member
 
Join Date: Aug 2018
Posts: 588
iTrader: 2 / 100%
Default

Quote:
Originally Posted by jarhead714 View Post
There’s not much troublesome ammunition with Minis. Only troublesome magazines.
Preach it, brother! I've had some real bad luck with mags.

I was more or less saying if he dialed the gas down to not throw brass 30 feet away...
Reply With Quote
  #9  
Old 09-14-2021, 4:09 PM
jarhead714 jarhead714 is online now
Calguns Addict
 
Join Date: Dec 2012
Location: The County Seat
Posts: 5,405
iTrader: 16 / 100%
Default

Finding magazines that your Mini likes is kind of like finding .22LR ammunition that your Sig Mosquito likes. It takes time and money, time and money.
Reply With Quote
  #10  
Old 09-14-2021, 4:11 PM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Default

Other than my old pre-ban USA and Bingham 40s, I only use Ruger factory 10s, 20s, and 30s. I already had a bunch of them from my LEO days when IU carried a Mini as my patrol carbine, and topped off my supply during 2019 "Freedom Week."

If you run a glass, dialing down with smaller bushings is a good idea. I do run front and rear buffers. That also helps keep from beating up optics.

Last edited by imarangemaster; 09-14-2021 at 4:18 PM..
Reply With Quote
  #11  
Old 09-14-2021, 4:28 PM
NorCalRefuge's Avatar
NorCalRefuge NorCalRefuge is offline
Senior Member
 
Join Date: Aug 2018
Posts: 588
iTrader: 2 / 100%
Default

Quote:
Originally Posted by imarangemaster View Post
Other than my old pre-ban USA and Bingham 40s, I only use Ruger factory 10s, 20s, and 30s. I already had a bunch of them from my LEO days when IU carried a Mini as my patrol carbine, and topped off my supply during 2019 "Freedom Week."

If you run a glass, dialing down with smaller bushings is a good idea. I do run front and rear buffers. That also helps keep from beating up optics.
Mine seems to eat buffers like it's never been fed before! I use the WC blue 1911 ones... but they always get chewed up usually within a range day or two. So far, my el-cheapo RDS (AT3) has held zero and not died, but tomorrow may be the day. I've got it mounted on a Ultimak rail, which I love.

The factory 20's seem to be the best "out of the box" for me, although with some finessing you can get most to run fairly well. I've had to bend and polish feed lips on nearly all of my mags, but eventually they start to cooperate. This discussion has been had over and over, but it's a crying shame the mags are responsible for practically 99% of failures on the mini... it's an otherwise wonderful rifle.

Last edited by NorCalRefuge; 09-14-2021 at 4:30 PM..
Reply With Quote
  #12  
Old 09-14-2021, 4:44 PM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Default

Over the years I have carried/used/shot Minis (starting in 1982), I have NEVER had a malfunction from a factory 20, no matter what I shoot. Second is the factory 30s. They run about 100% (maybe 99.9%) with Brass cased, but do not like steel case Russian for the first few rounds.

I have 9 Ruger factory 20 rounders for my "go to" load. I use a re-pop Rhodesian Fereday chest pouch that holds 8 of the Mini-14 or Mini-30 twenty rounders.


For the 30s, I have an old 1980s vintage Galati Int. 6-pack shoulder bag or LBV with 6 single taco pouches. The 186 pictured was my first effort at the perfect mini. It had 1/7 barrel, the 580 sight, and threaded 1/2x28 for flash hiders and breaks. The problem was, it would not take the standard Ruger scope rings.




Last edited by imarangemaster; 09-14-2021 at 4:49 PM..
Reply With Quote
  #13  
Old 09-14-2021, 6:40 PM
bohoki's Avatar
bohoki bohoki is offline
I need a LIFE!!
 
Join Date: Jan 2006
Location: 92688
Posts: 19,633
iTrader: 21 / 100%
Default

Quote:
Originally Posted by imarangemaster View Post
Other than my old pre-ban USA and Bingham 40s, I only use Ruger factory 10s, 20s, and 30s. I already had a bunch of them from my LEO days when IU carried a Mini as my patrol carbine, and topped off my supply during 2019 "Freedom Week."

If you run a glass, dialing down with smaller bushings is a good idea. I do run front and rear buffers. That also helps keep from beating up optics.
i have a bunch of thermold magazines dated 1986 and 1989 they work great
Reply With Quote
  #14  
Old 09-15-2021, 4:54 AM
smle-man's Avatar
smle-man smle-man is online now
Calguns Addict
 
Join Date: Jan 2007
Location: North Carolina
Posts: 9,641
iTrader: 127 / 100%
Default

Original Equipment brand 20 round straight magazines work perfectly in my series 185 Mini-14 as do their 10 round magazines (although I don't need those anymore). CDNN in Texas has the OE magazines on an irregular basis.
__________________
4th generation citizen soldier - U.S. Army (ret)

"Everybody dies.. the thing is, to die well' Jack Harper
Reply With Quote
  #15  
Old 09-15-2021, 7:08 AM
SharedShots SharedShots is offline
Senior Member
 
Join Date: Feb 2021
Posts: 523
iTrader: 1 / 100%
Default

Good on your for the project.

=

I've been using factory 5 and 1 round mags, never a problem and many years before factory mags in 20 and 30 never failed either or it was so rare because of their high count rate. While factory mags might cost more than aftermarket not so when you figure out that just getting them and having them work is better than having a bucket full of mags that are hit or miss. I've found that even minimum maintenance keeps the mini running perfectly and rust free - including the mags.

A backup on the Accuracy Systems, they are tops for CS.

I've been shooting subs and supers in my 300 BLKOUT and not one misfeed, FTE FTF or anything even close. It just eats any ammo I stuff into the mags. That is the nice thing about Minis, they just work without any fussing around. Understand what it is and why it is and then all the worrying about trying to create a creampuff goes away.

I'm looking for another 300 BLKOUT but they seem hard to find in stock ready to buy. Lobbing those heavy subs is pure fun. Shoot a bunch of lighter bullets and then switch to subs and you'll know one reason 300 BLKOUT is such a joy to shoot.
__________________
Happiness is a warm barrel.
It takes only one person and two forums to create the appearance of lots of people saying the same thing.
A SILENT MAJORITY will become a silent minority when those who have something to lose fear those who have something to gain. Defense is a losing proposition when time is on the side of the opponent.
You can have it one way or the other; you can have it both ways; you can have it every way but not always.
Reply With Quote
  #16  
Old 09-15-2021, 11:45 AM
sfvshooter's Avatar
sfvshooter sfvshooter is offline
Senior Member
 
Join Date: Jan 2016
Location: LA/SFV
Posts: 905
iTrader: 13 / 100%
Default

Since this is a Mini 14 slobberfest I'll keep my "lipstick on a pig" comments to myself.

This is my Accuracy Systems Mini 14 with an adjustable gas block, 18" 223 Wylde 1-8 twist barrel, trigger upgrade, etc. I tested with a bunch of 77gr 5.56/223 and it seems to like Fiocchi 77gr SMK. 1-1.25 MOA and consistent hits out to 400 yards.

Wasn't cheap and in hindsight I probably wouldn't do it again, but what's the point of inaccurate rifles.

__________________
Too many rifles, not enough time...
Reply With Quote
  #17  
Old 09-15-2021, 1:54 PM
smle-man's Avatar
smle-man smle-man is online now
Calguns Addict
 
Join Date: Jan 2007
Location: North Carolina
Posts: 9,641
iTrader: 127 / 100%
Default



Mine is as accurate as I am with iron sights at my age. It prefers 68 gr BTHPs
__________________
4th generation citizen soldier - U.S. Army (ret)

"Everybody dies.. the thing is, to die well' Jack Harper
Reply With Quote
  #18  
Old 09-15-2021, 2:59 PM
W.R.Buchanan's Avatar
W.R.Buchanan W.R.Buchanan is offline
Senior Member
 
Join Date: Jan 2008
Location: Ojai CA
Posts: 2,073
iTrader: 0 / 0%
Default

Ima: I think you are close but the one glaring weak point is the sling.

You need to figure out how to do a Side Mounted Sling. It will allow you to carry any of the 4 different carry options. Cross Body the most preferred.

Here's a pic of mine so you can cogitate on it. you've seen my other pics on this subject so I won't clog up the thread with them, but note: How the gun hangs flat. This is key to the gun hanging off you in the most comfortable manner possible

Also look at Sandog's Side Mounted Slings on his guns.

Randy



Attached Images
File Type: jpg 100464199.JPG (90.0 KB, 248 views)
File Type: jpg 100464200.jpg (39.0 KB, 240 views)
__________________
Rule #1 Liberals screw up everything they touch.
Rule #2 Whatever they accuse you of, they are already doing.
Rule #3 Liberals lie about anything no matter how insignificant.
Rule #4 If all else fails, they call you a Racist!

It's not how well you do what you know how to do,,, It is how well you do what you don't know how to do.
www.buchananprecisionmachine.com

Last edited by W.R.Buchanan; 09-16-2021 at 11:14 AM..
Reply With Quote
  #19  
Old 09-15-2021, 3:32 PM
NorCalRefuge's Avatar
NorCalRefuge NorCalRefuge is offline
Senior Member
 
Join Date: Aug 2018
Posts: 588
iTrader: 2 / 100%
Default

Quote:
Originally Posted by W.R.Buchanan View Post
Ima: I think you are close but the one glaring weak point is the sling.

You need to figure out how to do a Side Mounted Sling. It will allow you to carry any of the 4 different carry options. Cross Body the most preferred.

Here's a pic of mine so you can cogitate on it. you've seen my other pics on this subject so I won't clog up teh thread with them.

Also look at Sandog's Side Mounted Slings on his guns.

Randy



Looks like a Specter Gear sling? They make nice options for the mini, including the side mounted like this, my fave.
Reply With Quote
  #20  
Old 09-15-2021, 4:23 PM
bohoki's Avatar
bohoki bohoki is offline
I need a LIFE!!
 
Join Date: Jan 2006
Location: 92688
Posts: 19,633
iTrader: 21 / 100%
Default

i love that john mason butt extension used to love his tables at the big reno show
Reply With Quote
  #21  
Old 09-15-2021, 6:12 PM
TMB 1's Avatar
TMB 1 TMB 1 is offline
Calguns Addict
 
Join Date: Dec 2012
Location: 530
Posts: 6,855
iTrader: 0 / 0%
Default

Here's mine. Has Meprolight night sight front sight, Choate handguard, metal butt plate from Numrich, M1 Carbine mag pouch with two factory 5 rnd mags, and leather sling. With 10 round mag instead of 20rnd it will fit in M1 Garand's leather scabbard.


Attached Images
File Type: jpg Mini 14.jpg (101.0 KB, 65 views)
__________________
Reply With Quote
  #22  
Old 09-16-2021, 8:42 AM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Default

Next step done: Socom Strut and 580 front sight installed. Lots of room to thread 9/16x24. Shown with Choate front sight that I took off for comparison. I used the barrel groove for the factory roll pin, which allowed lots of threading room. I had to deepen the groove a bit with an 1/8" round file.

Still waiting on tap and die, and poly stock.




Last edited by imarangemaster; 09-16-2021 at 8:48 AM..
Reply With Quote
  #23  
Old 09-16-2021, 10:58 AM
W.R.Buchanan's Avatar
W.R.Buchanan W.R.Buchanan is offline
Senior Member
 
Join Date: Jan 2008
Location: Ojai CA
Posts: 2,073
iTrader: 0 / 0%
Default

Quote:
Originally Posted by NorCalRefuge View Post
Looks like a Specter Gear sling? They make nice options for the mini, including the side mounted like this, my fave.
Actually that is one of my BPM Slings.

The idea for the Front and Rear Attachments came from a Blue Force Sling I copied. This gun has had that sling on it since 2006. The gun has been to no less than 5 Front Sight Rifle Classes, so I know it works. It was my first iteration of this concept. Now I use Grov-Tec Screw in Sockets for QD Push Button Sling Swivels.



I sell the Slings made from 1.5" Nylon Belt Material on my Website, I have one on virtually every modern gun I own including all my Tactical Shotguns. All are side mounted. Same sling works on all styles of long guns.

Side Mounting is the only way to mount a sling as it allows for all forms of carry and keeps the gun laying flat against you so the magazine isn't constantly poking you.



If they didn't work perfectly I wouldn't be using them !!!

Randy
Attached Images
File Type: jpg 100465062.jpg (28.2 KB, 147 views)
File Type: jpg 100464119.jpg (55.8 KB, 149 views)
__________________
Rule #1 Liberals screw up everything they touch.
Rule #2 Whatever they accuse you of, they are already doing.
Rule #3 Liberals lie about anything no matter how insignificant.
Rule #4 If all else fails, they call you a Racist!

It's not how well you do what you know how to do,,, It is how well you do what you don't know how to do.
www.buchananprecisionmachine.com

Last edited by W.R.Buchanan; 09-16-2021 at 11:12 AM..
Reply With Quote
  #24  
Old 09-16-2021, 1:45 PM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Default

scrapped

Last edited by imarangemaster; 09-17-2021 at 6:26 PM..
Reply With Quote
  #25  
Old 09-16-2021, 7:21 PM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Default

Im not happy with a 9/16 thread. No compact brakes that I like in that thread. Started over and turned the barrel down to 1/2", then threaded it 1/2x28. More pics tomorrow.
Reply With Quote
  #26  
Old 09-16-2021, 8:15 PM
CamW CamW is offline
Senior Member
 
Join Date: Oct 2005
Location: SGV
Posts: 1,415
iTrader: 125 / 100%
Default

Has anyone tried or seen the front sights by Cogburn Arsenal?
The H&K style sight looks interesting. They're metal 3D printed.

https://cogburnarsenal.com/product-category/sights/

Their magazine releases look pretty cool too.

https://cogburnarsenal.com/product-c...azine-release/

Last edited by CamW; 09-16-2021 at 8:24 PM..
Reply With Quote
  #27  
Old 09-17-2021, 7:57 AM
W.R.Buchanan's Avatar
W.R.Buchanan W.R.Buchanan is offline
Senior Member
 
Join Date: Jan 2008
Location: Ojai CA
Posts: 2,073
iTrader: 0 / 0%
Default

IMA: it doesn't look like you got the die started strait.

You need to turn the barrel to the major Dia. for whatever threads you want.

Put a chamfer on the front that is bigger than the minor dia of the thread.

Put the die against the chamfer on the barrel so that the starting threads are covering the chamfer on the barrel.

Then Pin the Die against the threads with the front face of your drill chuck with the jaws completely retracted.

The front face of your drill chuck should be square to the Center Line of the Spindle so that should guarantee that your threads get started Strait.

If all else fails cut the buggered section of the barrel off and single point the the beginning of the thread which will insure that your threads are square and then finish them with the die. You need to take a few shallow passes to insure that you have the thread established enough so the die will follow it.

Hope this helps

Randy
__________________
Rule #1 Liberals screw up everything they touch.
Rule #2 Whatever they accuse you of, they are already doing.
Rule #3 Liberals lie about anything no matter how insignificant.
Rule #4 If all else fails, they call you a Racist!

It's not how well you do what you know how to do,,, It is how well you do what you don't know how to do.
www.buchananprecisionmachine.com
Reply With Quote
  #28  
Old 09-17-2021, 12:20 PM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Default

Quote:
Originally Posted by W.R.Buchanan View Post
IMA: it doesn't look like you got the die started strait.

You need to turn the barrel to the major Dia. for whatever threads you want.

Put a chamfer on the front that is bigger than the minor dia of the thread.

Put the die against the chamfer on the barrel so that the starting threads are covering the chamfer on the barrel.

Then Pin the Die against the threads with the front face of your drill chuck with the jaws completely retracted.

The front face of your drill chuck should be square to the Center Line of the Spindle so that should guarantee that your threads get started Strait.

If all else fails cut the buggered section of the barrel off and single point the the beginning of the thread which will insure that your threads are square and then finish them with the die. You need to take a few shallow passes to insure that you have the thread established enough so the die will follow it.

Hope this helps

Randy

Yep, it is a bit off. I did not have a 22 caliber TAT for that die. That is one reason I scrapped 9/16 and went to 1/2x28. I have a steel .22 caliber TAT for 1/2x28, and it came out dead straight.
Reply With Quote
  #29  
Old 09-17-2021, 4:07 PM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Default

OK, next step done. Turned to 1/2x28, and a 5 slot AIM Sports A2 style Muzzle Brake added with crush washer.. Used a .22 caliber TAT and got threading nut nuts straight. Put a .22" diameter brass rod down bore, and exit hole is dead center around it. Last step will be factory poly stock that is allegedly in the mail....






Last edited by imarangemaster; 09-17-2021 at 5:12 PM..
Reply With Quote
  #30  
Old 09-17-2021, 4:48 PM
bohoki's Avatar
bohoki bohoki is offline
I need a LIFE!!
 
Join Date: Jan 2006
Location: 92688
Posts: 19,633
iTrader: 21 / 100%
Default

so the lesson here is that the upgrades costs as much as an ar15 to make a mini 14 as accurate as an ar-15
Reply With Quote
  #31  
Old 09-17-2021, 5:09 PM
imarangemaster's Avatar
imarangemaster imarangemaster is offline
Veteran Member
 
Join Date: Mar 2011
Location: Nor-Cal Foothills area
Posts: 2,525
iTrader: 10 / 100%
Default

LOL! Maybe for some. My Mini was accurate enough for me bone stock. MY "perfect Mini" could be a current out of the box tactical, except they have 1/9 twist. I'm doing this to have one with a 1/7 twist.
Reply With Quote
  #32  
Old 09-17-2021, 7:50 PM
DrewN DrewN is online now
Senior Member
 
Join Date: Sep 2012
Location: Orange County
Posts: 1,333
iTrader: 3 / 100%
Default

Quote:
Originally Posted by bohoki View Post
so the lesson here is that the upgrades costs as much as an ar15 to make a mini 14 as accurate as an ar-15
ROFL. I have 2 Minis that I refuse to even tally the receipts on. We all did silly things in the OLL days.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 6:08 AM.




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2021, Calguns.net an Incorporated Company All Rights Reserved.
All opinions, statements and remarks made by Calguns.net on this web site and elsewhere are solely attributable to Calguns.net.



Seams2SewBySusy

Tactical Pants Tactical Boots Military Boots 5.11 Tactical