|
Semiauto Rifles Gallery Post pictures of your rifles and carbines here! |
|
Thread Tools | Display Modes |
#201
|
||||
|
||||
Quote:
__________________
Liberty is 'Freedom To' not 'Freedom From' When they kick in your front door, How you gonna come? With your hands on your head, Or on the trigger of your gun? |
#202
|
||||
|
||||
Quote:
Nice build |
#204
|
||||
|
||||
Received the last of the parts for the AR-10's today. Checked the head space on the Fulton BCG and DPMS SASS. It's tight, but it's a go.
I had to get a little creative getting that darn ejector spring out. What a pain in the rear getting it back in. Guess it helps to have the proper tools. Here is my get er done method: Checking the head space: And Houston we are a............. I should have pictures up with the complete builds and parts list in a few days. I have to modify a few washers so the muzzle brake clocks just right.
__________________
|
#205
|
||||
|
||||
From nose to tail Step Fathers (the AR-10 with traditional upper and smaller scope): JP Bennie Cooley Muzzle Brake Ace hardware hardened steel washer (pain in the rear to fit) DPMS 18" SASS mid length fluted stainless steel black teflon barrel DPMS low profile gas block .936 (plus roll pin sold separately) DPMS mid length gas tube Fulton Armory Phantom rifle length hand guard DPMS pattern Hand guard rail 2" LaRue Tactical Harris Bipod BR-S with their LT130 QD mount DPMS upper (came with dust cover and forward assist) DPMS chrome BCG Vltor BCM Gunfighter medium size charge handle DPMS lower, came with bullet button & 10 round mag (non panther CA legal) DPMS LPK CMC drop in trigger with flat trigger 3.5# pull Command Arms Interchangeable Pistol Grip Magpul PRS ar308 DPMS Butt stock Assembly (Have a traditional stock if I want to switch it out) Magpul 10/20 mags Magpul PRS Extended recoil pad .5" American Defense Recon quick release 20 MOA 30mm one piece scope mount Millett Tactical TRS-1 30mm 4-16x50 side focus illuminated Mil-Dot Mine: Everything above except for Fulton Armory Titan side cocking flat top upper Complete BCG Titan with side cocking handle installed American Defense Recon quick release 20 MOA with 35mm rings Millett Tactical LRS 35mm 6-25x56mm side focus illuminated Mil-Dot Misc: .308 upper receiver block (claw) PRI upper receiver take down pin vise block Forster Head space .308 GO and NO Go tools I already had the punches, non marring brass hammer, levels, feeler gauges, hand guard install tool, torque wrench, vise, ect ect.... I was as happy as a grade school-er on Christmas morning after finally finishing these two. I'm flying out to New Mexico (where step dad lives) in a few weeks, and I'm bringing these twins out with me. I plan on hand delivering his to him. He has a house down at Elephant Butte with a 600 yard range near by. He has a Caldwell lead sled shooting rest, and we will sight these bad boys in together. I also made sure to get lowers with sequential serial numbers I hope this build list helps a future AR-10 project. This AR-10 tread certainly helped me.
__________________
Last edited by SR-71 BLACKBIRD; 02-26-2012 at 7:09 AM.. |
#206
|
||||
|
||||
I changed mine up a little this week.
1. Took off the AFG and put on a QD Tangy Down Stubby 2. Took off my Magpul CTR and put on a Vltor Emod 3. Grabbed a B&T Quick-Detach Bi-Pod for bench shooting (very easy on and off and pretty sturdy as well) Chad |
#208
|
||||
|
||||
Quote:
Upper Built By Addax Tactical Addax Tactical Billet Upper Receiver Black hole Weaponry 1/11 twist Barrel Daniel Defense 12” lite Rail Battlecomp BABC .30 DPMS Chrome BCG The rest of the build is here. http://www.calguns.net/calgunforum/s...d.php?t=528850 Hope that helps, Chad |
#209
|
||||
|
||||
Thank you to SR-71 for helping me torque on my barrel for me!! super nice guy !! much appreciated !!
__________________
" You have enemies? Good. That means you've stood up for something in your life. " - Winston Churchill |
#210
|
||||
|
||||
Your welcome. Can't wait to see your finished AR-10.
__________________
|
#211
|
||||
|
||||
Hey guys, any thoughts on the Colt 901? My local gun dealer said he has them on order. I just have to come up with 2500 by then lol.
__________________
"We are not human beings having a spiritual experience; we are spiritual beings having a human experience." - Pierre Teilhard de Chardin. |
#212
|
||||
|
||||
Quote:
Google it to see if there are any good reviews, but it's a little premature. ALSO! My scope comes in today, so look out for my final project picture TONIGHT! *happy dance* Even got my feeler gauges and bubble level ready! |
#214
|
|||
|
|||
Last edited by Randee; 03-15-2012 at 9:28 PM.. |
#215
|
||||
|
||||
Here is a pic of my finished .308 AR! sorry for the crappy iphone pic, its the only camera i have lol, will take more pics at the range wednesday! ive already fired her once, put about 80 rounds through it, No failures of any kind. runs like a champ!
MEGA MA TEN upper and lower combo Fulton Armory chromed BCG Magpul MIAD Magpul CTR VLTOR 6 position tube, AR10 buffer/spring RRA LPK Mega tactical trigger PRI Delta CF handguard Rainier arms 16" barrel JP tactical compensator Magpul flip up sights ( temporarily lol ) soon to come, trijicon T11E ACOG
__________________
" You have enemies? Good. That means you've stood up for something in your life. " - Winston Churchill |
#217
|
||||
|
||||
Forgot to put my build in here. Going to the range this sunday, can't wait. It weighs in at 10.8 lbs with an unloaded mag as pictured.
-Tactical Machining TM-10 lower -Tactical Machining LPK -Phase 5 EBR -BADASS ambi safety -Raddlock bullet button -Magpul MIAD, UBR, LR 20 pmags -DPMS upper receiver with chrome DPMS BCG -Rainier Arms select 18" barrel -SWFA SD 16x42 scope mounted in ADM Recon X 20moa mount Future upgrades (summertime): -Gisselle trigger -Troy, Apex, or JP Free float -Battlecomp BABC -a good bipod.
__________________
Rock Island Armory 1911 9mm Tactical | Fusion Com Pro-S CF Trigger group | DP Fiber Optic Front Sight | Strike Industries Golf Ball Semi Gloss Grips | Springfield 1911 TRP Operator | Strike Industries Sunrise Pistol Grip AR15 | LMT 14.5" | CMMG lower | VLTOR CAS-V | ARMS #71 Rear BUIS | Pinned BC 1.5 | Burris PEPR QD Mount | Redfield 2-7x33 scope | LR308 | TM-10 Lower | DPMS Upper, Chrome BCG | Rainier Arms 18" Select Barrel | ADM Recon 20 MOA mount | SWFA SS 16x42 scope | Last edited by OutkastSL; 03-21-2012 at 11:46 PM.. |
#219
|
||||
|
||||
I'm in a wheelchair due to paralysis and don't have ab muscles so if I'm shooting off hand, I need it LIGHT! It's gotta be your SASS barrel, heard they are beasts in weight.
__________________
Rock Island Armory 1911 9mm Tactical | Fusion Com Pro-S CF Trigger group | DP Fiber Optic Front Sight | Strike Industries Golf Ball Semi Gloss Grips | Springfield 1911 TRP Operator | Strike Industries Sunrise Pistol Grip AR15 | LMT 14.5" | CMMG lower | VLTOR CAS-V | ARMS #71 Rear BUIS | Pinned BC 1.5 | Burris PEPR QD Mount | Redfield 2-7x33 scope | LR308 | TM-10 Lower | DPMS Upper, Chrome BCG | Rainier Arms 18" Select Barrel | ADM Recon 20 MOA mount | SWFA SS 16x42 scope | |
#220
|
||||
|
||||
Quote:
The wife getting some :-)
__________________
Last edited by SR-71 BLACKBIRD; 04-15-2012 at 7:31 AM.. |
#221
|
||||
|
||||
Some minor changes and better pics.
__________________
Rock Island Armory 1911 9mm Tactical | Fusion Com Pro-S CF Trigger group | DP Fiber Optic Front Sight | Strike Industries Golf Ball Semi Gloss Grips | Springfield 1911 TRP Operator | Strike Industries Sunrise Pistol Grip AR15 | LMT 14.5" | CMMG lower | VLTOR CAS-V | ARMS #71 Rear BUIS | Pinned BC 1.5 | Burris PEPR QD Mount | Redfield 2-7x33 scope | LR308 | TM-10 Lower | DPMS Upper, Chrome BCG | Rainier Arms 18" Select Barrel | ADM Recon 20 MOA mount | SWFA SS 16x42 scope | |
#222
|
||||
|
||||
Not really a build, but a modification.
Remington R-25 Changed to; DPMS Carbine tube and buffer Magpul MIAD grip Magpul CTR Stock Phase5 V2 Bolt release (Works like the Magpul BAD lever but is one piece) Blackhawk 9"-12" pivoting Bipod BCM Gunfighter Mod 3 Large Charging Handle Leupold 3x9 Mark 2 Scope with Larue LT 104 QD Mount Just finished it today with the arrival of the Phase 5 I have it zeroed at 200 and cant wait until next month when I see how it does in some target events. I haven't seen many R-25's and i'm sure fewer will look like this one. Thanks Don
__________________
I support peace through superior firepower. "Para ser libre, un hombre debe tener tres cosas, la tierra, una educacion y un fusil. Siempre un fusil ! (To be free, a man must have three things; land, an education and a rifle. Always a rifle)" -Emiliano Zapata. Last edited by Don the savage; 03-30-2012 at 5:19 PM.. |
#226
|
||||
|
||||
very nice, i'm jealous. I wish i could afford a build based of the monolithic mega set.
__________________
Rock Island Armory 1911 9mm Tactical | Fusion Com Pro-S CF Trigger group | DP Fiber Optic Front Sight | Strike Industries Golf Ball Semi Gloss Grips | Springfield 1911 TRP Operator | Strike Industries Sunrise Pistol Grip AR15 | LMT 14.5" | CMMG lower | VLTOR CAS-V | ARMS #71 Rear BUIS | Pinned BC 1.5 | Burris PEPR QD Mount | Redfield 2-7x33 scope | LR308 | TM-10 Lower | DPMS Upper, Chrome BCG | Rainier Arms 18" Select Barrel | ADM Recon 20 MOA mount | SWFA SS 16x42 scope | |
#227
|
|||
|
|||
HaHa...me too! If I could afford it, you would be seeing more than just the stripped upper/lower set
|
#228
|
||||
|
||||
That's true, I could have gone that route but wanted to build mine quick. Built mine in about 3 months and I'm still happy with it.
ghettophilosopher, nice shooting!
__________________
Rock Island Armory 1911 9mm Tactical | Fusion Com Pro-S CF Trigger group | DP Fiber Optic Front Sight | Strike Industries Golf Ball Semi Gloss Grips | Springfield 1911 TRP Operator | Strike Industries Sunrise Pistol Grip AR15 | LMT 14.5" | CMMG lower | VLTOR CAS-V | ARMS #71 Rear BUIS | Pinned BC 1.5 | Burris PEPR QD Mount | Redfield 2-7x33 scope | LR308 | TM-10 Lower | DPMS Upper, Chrome BCG | Rainier Arms 18" Select Barrel | ADM Recon 20 MOA mount | SWFA SS 16x42 scope | Last edited by OutkastSL; 04-01-2012 at 11:06 PM.. |
#229
|
||||
|
||||
Nice builds guys! Thanks for the video. How can I NOT like a guy with SR-71 as a handle??
I recently started my MATEN build, and actually get it out of jail in the morning! I had every intention of slowly purchasing parts, but with all of the backorder BS, I snapped up a chrome Fulton BCG and a JP enhanced bolt kit last night. Got my PRS in the mail today and also have a DPMS LPK in the mail. I would have picked up a standard DPMS bolt, but could not seem to find one. Any thoughts on JPs bolt? I'm looking to pick up a 20" Rainier ultra match barrel. Any other thoughts on barrels?I'm ok with dropping a little coin on the barrel. Gonna use the gun to hunt with, so I want a tack driver. Thanks! Billy |
#230
|
||||
|
||||
Sounds like a great build in the works. From what I've read people review the 20" Rainier Ultra match barrel really well and it can give sub MOA accuracy. I went with a 18" select barrel because I mainly do bench shooting and wanted a budget build. If I feel the need in the future I will upgrade to the Ultra match.
__________________
Rock Island Armory 1911 9mm Tactical | Fusion Com Pro-S CF Trigger group | DP Fiber Optic Front Sight | Strike Industries Golf Ball Semi Gloss Grips | Springfield 1911 TRP Operator | Strike Industries Sunrise Pistol Grip AR15 | LMT 14.5" | CMMG lower | VLTOR CAS-V | ARMS #71 Rear BUIS | Pinned BC 1.5 | Burris PEPR QD Mount | Redfield 2-7x33 scope | LR308 | TM-10 Lower | DPMS Upper, Chrome BCG | Rainier Arms 18" Select Barrel | ADM Recon 20 MOA mount | SWFA SS 16x42 scope | |
#231
|
||||
|
||||
MA-TEN
Ma-Ten with DPMS 18" SASS barrel and bolt.
MI low profile gas block. JP free float. Armalite lower part-kit with DPMS bolt-hold device (apparently Ma-ten and Armalite bolt-hold open don't play well) Vltor rifle stock. In progress pic, loc-tite-ing the outer barrel nut on the JP handguard. Last edited by duc748bip; 08-20-2012 at 12:43 PM.. |
#232
|
||||
|
||||
Quote:
Thanks for the response. What kind of groups are you getting with the select barrel? I'm sure a rainier select would be plenty! (I've heard from more than one smith) Getting closer! |
#233
|
||||
|
||||
Quote:
I also starte to reload my own ammo, hopefully I'll be able to build some consistent match loads and get better accuracy.
__________________
Rock Island Armory 1911 9mm Tactical | Fusion Com Pro-S CF Trigger group | DP Fiber Optic Front Sight | Strike Industries Golf Ball Semi Gloss Grips | Springfield 1911 TRP Operator | Strike Industries Sunrise Pistol Grip AR15 | LMT 14.5" | CMMG lower | VLTOR CAS-V | ARMS #71 Rear BUIS | Pinned BC 1.5 | Burris PEPR QD Mount | Redfield 2-7x33 scope | LR308 | TM-10 Lower | DPMS Upper, Chrome BCG | Rainier Arms 18" Select Barrel | ADM Recon 20 MOA mount | SWFA SS 16x42 scope | |
#234
|
||||
|
||||
Quote:
I drop in the CMC single stage into my AR15, and chill out of rifle parts (yeha right that's what I tell my self now). You know how that goes
__________________
|
#235
|
||||
|
||||
Here's my new .308 build. Basically finished after waiting 3 months for the bolt carrier. I still need a bipod & I think I'm going to throw a Nightforce on it. Guess I need to start saving some more money. I can't wait to go shoot it this weekend!!
Parts list is: Mega monithlic upper/lower set, Fulton 20" barrel JP adj gas block JP muzzle break JP enhanced bolt Young bolt carrier Magpul UBR Slash heavy buffer & spring Daniel Defense LPK |
#238
|
||||
|
||||
Quote:
Chad |
Thread Tools | |
Display Modes | |
|
|