Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > FIREARMS DISCUSSIONS > California handguns > Handguns Gallery
Register FAQ Members List Calendar Mark Forums Read

Handguns Gallery Post your pictures of your favorite sidearm here.

Closed Thread
 
Thread Tools Display Modes
  #881  
Old 03-29-2011, 10:53 PM
G1500 G1500 is offline
Senior Member
 
Join Date: Oct 2010
Location: IE
Posts: 1,822
iTrader: 8 / 100%
Default

Quote:
Originally Posted by rareair View Post
Did your FFL DROS those lowers as pistols? Or are you building a couple of SBRs?
I was wondering the same thing...
  #882  
Old 03-30-2011, 7:52 AM
EBR Works's Avatar
EBR Works EBR Works is offline
Vendor/Retailer
 
Join Date: Dec 2007
Location: Prescott, AZ
Posts: 10,399
iTrader: 120 / 100%
Default

Quote:
Originally Posted by rareair View Post
How is that CAA cheek rest attached to the buffer tube? I purchased one of those cheek rests and can't figure out how to attach it. It fits very loose on the buffer tube
I used small, black zip ties. There doesn't seem to be any other way to do it.


Quote:
Originally Posted by rareair View Post
Did your FFL DROS those lowers as pistols? Or are you building a couple of SBRs?
I think tomd1584 might be a LEO, hence he is exempt.
__________________


Check out our e-commerce site here:

www.ebrworks.com

Serving you from Prescott, AZ
  #883  
Old 03-30-2011, 10:46 AM
tomd1584's Avatar
tomd1584 tomd1584 is offline
Calguns Addict
 
Join Date: Sep 2008
Location: SFV
Posts: 5,896
iTrader: 55 / 100%
Default

Quote:
Originally Posted by rareair View Post
Did your FFL DROS those lowers as pistols? Or are you building a couple of SBRs?
Quote:
Originally Posted by G1500 View Post
I was wondering the same thing...
They were DROS'd as pistols with LEO exemption.
  #884  
Old 03-30-2011, 10:59 AM
G1500 G1500 is offline
Senior Member
 
Join Date: Oct 2010
Location: IE
Posts: 1,822
iTrader: 8 / 100%
Default

Quote:
Originally Posted by tomd1584 View Post
They were DROS'd as pistols with LEO exemption.
Can a LEO buy a stripped lower receiver, DROS it as a pistol and decide he does not like it and sell it PPT?
  #885  
Old 03-30-2011, 11:17 AM
tomd1584's Avatar
tomd1584 tomd1584 is offline
Calguns Addict
 
Join Date: Sep 2008
Location: SFV
Posts: 5,896
iTrader: 55 / 100%
Default

Quote:
Originally Posted by G1500 View Post
Can a LEO buy a stripped lower receiver, DROS it as a pistol and decide he does not like it and sell it PPT?
Yes.
  #886  
Old 03-30-2011, 12:29 PM
wingman's Avatar
wingman wingman is offline
Member
 
Join Date: Jan 2010
Location: Represa, CA
Posts: 292
iTrader: 14 / 100%
Default How I mounted 4 CCA cheek rest

Quote:
Originally Posted by rareair View Post
How is that CAA cheek rest attached to the buffer tube? I purchased one of those cheek rests and can't figure out how to attach it. It fits very loose on the buffer tube
First off I have Spike tube with pad. I took the CCA cheek pad and removed extra plastic around rear holes and put 2" 8-32 brass screw in them to clamp down back. I then drilled holes in front of it so the screw was inside small tube on bottom and this clamp down the front (not to tight). Hope this helps, I can email a pic if u wish!
PS It also helped to upgrade latch handle (Mod4) to reduce pad catching the handle.
  #887  
Old 03-30-2011, 12:33 PM
EBR Works's Avatar
EBR Works EBR Works is offline
Vendor/Retailer
 
Join Date: Dec 2007
Location: Prescott, AZ
Posts: 10,399
iTrader: 120 / 100%
Default

Quote:
Originally Posted by wingman View Post
I took the CCA cheek pad and removed extra plastic around rear holes and put 2" 8-32 brass screw in them to clamp down back. I then drilled holes in front of it so the screw was inside small tube on bottom and this clamp down the front (not to tight). Hope this helps, I can email a pic if u wish!
PS It also helped to upgrade latch handle (Mod4) to reduce pad catching the handle.
Could you post pics of this mod so I can lose the zip ties? Thanks.
__________________


Check out our e-commerce site here:

www.ebrworks.com

Serving you from Prescott, AZ
  #888  
Old 03-30-2011, 2:04 PM
till44's Avatar
till44 till44 is offline
Veteran Member
 
Join Date: Jan 2008
Location: East Bay
Posts: 2,600
iTrader: 190 / 100%
Default

My AR pistol has sat in my safe for probably a year now, it just doesn't get used, so I have been out of the loop with the whole AFG not a second hand grip statement from ATF.

So to clarify, AFGs are GTG on locked mag pistols but not on featureless rifles as there is still no word from CA DOJ as to whether the AFG is classified as an evil feature. From my understanding then, b/c my AR pistol is a reg'd AW, I can throw an AFG on it and still be legal, as it is exempt from all CA evil feature restrictions and ATF has said the AFG is not a second grip making an AOW... Is my thinking flawed or what?
  #889  
Old 03-30-2011, 2:23 PM
EBR Works's Avatar
EBR Works EBR Works is offline
Vendor/Retailer
 
Join Date: Dec 2007
Location: Prescott, AZ
Posts: 10,399
iTrader: 120 / 100%
Default

Quote:
Originally Posted by till44 View Post
My AR pistol has sat in my safe for probably a year now, it just doesn't get used, so I have been out of the loop with the whole AFG not a second hand grip statement from ATF.

So to clarify, AFGs are GTG on locked mag pistols but not on featureless rifles as there is still no word from CA DOJ as to whether the AFG is classified as an evil feature. From my understanding then, b/c my AR pistol is a reg'd AW, I can throw an AFG on it and still be legal, as it is exempt from all CA evil feature restrictions and ATF has said the AFG is not a second grip making an AOW... Is my thinking flawed or what?
ATF has stated that it does not make the firearm an AOW. DOJ has not taken a position. Below is the ATF letter. The AFG is mentioned in the last question:
Attached Files
File Type: pdf ATF Response - AR15 Type Pistols & Magpul AFG.pdf (153.5 KB, 123 views)
__________________


Check out our e-commerce site here:

www.ebrworks.com

Serving you from Prescott, AZ
  #890  
Old 04-04-2011, 10:38 PM
MrPlink's Avatar
MrPlink MrPlink is offline
I need a LIFE!!
 
Join Date: Mar 2010
Location: Portland / East Bay
Posts: 12,532
iTrader: 8 / 100%
Default

heres a crappy cel pick of my first build ever I just finished.
Took me quite a few months to do, as Ive been caught up with so many other things.
Now I just need the time to shoot it!

This is actually my first "build" ever


Being that the upper is a LMT, I originally had planned on doing something of a more modern MK18 pistol, but ultimately decided to keep things a bit more simple and old school looking.

10.5" LMT upper
home completed 80% lower with no markings ()
BCM BCG
DPMS lpk
BCM gunfighter large latch charging handle
convertible bullet button
colt carry handle
double heat sheilded std type handguards
rifle extension tube and buffer


While I do think the A2 fits with the over all look rather well, I really hate these things, and have dumped them immediately on every firearm I own that came with one. I think I am gonna toss a MIAD on there.

Im going to see if I can get a DD ez carbine sling mount to work with it, plus add a can butt cap to the buffer tube and I think Im finished.
__________________
The California Moderate Centrist Militia member in exile

disclaimer:
everything I post is for arguendo and entertainment purposes only, and should not be construed to be legal advice
  #891  
Old 04-06-2011, 7:40 AM
EBR Works's Avatar
EBR Works EBR Works is offline
Vendor/Retailer
 
Join Date: Dec 2007
Location: Prescott, AZ
Posts: 10,399
iTrader: 120 / 100%
Default

Quote:
Originally Posted by fevillago View Post
is still not complete but here it is:
CA Registered AR 308 Pistol
Note: mag is a 10/20
JD lower and upper (matching set)
Nice! What is the barrel length/twist?
__________________


Check out our e-commerce site here:

www.ebrworks.com

Serving you from Prescott, AZ
  #892  
Old 04-06-2011, 7:47 AM
rareair's Avatar
rareair rareair is offline
Senior Member
 
Join Date: Jul 2010
Posts: 1,898
iTrader: 57 / 100%
Default

Quote:
Originally Posted by MrPlink View Post
This is actually my first "build" ever


10.5" LMT upper
home completed 80% lower with no markings ()
BCM BCG
DPMS lpk
BCM gunfighter large latch charging handle
convertible bullet button
colt carry handle
double heat sheilded std type handguards
rifle extension tube and buffer
You may want to reconsider the buffer tube before bringing it out for public viewing. That tube can accept a stock, and then can be configured as a SBR
__________________
MagPul MPLA
POF-USA P415-18-11T-223
TROY M7A1
& a bunch of SIG pistols and rifles

**WTB P227 TacOps**
  #893  
Old 04-06-2011, 12:45 PM
EBR Works's Avatar
EBR Works EBR Works is offline
Vendor/Retailer
 
Join Date: Dec 2007
Location: Prescott, AZ
Posts: 10,399
iTrader: 120 / 100%
Default

It's usually stamped somewhere on the barrel. The manufacturer of the barrel could tell you as well.
__________________


Check out our e-commerce site here:

www.ebrworks.com

Serving you from Prescott, AZ
  #894  
Old 04-06-2011, 1:06 PM
MrPlink's Avatar
MrPlink MrPlink is offline
I need a LIFE!!
 
Join Date: Mar 2010
Location: Portland / East Bay
Posts: 12,532
iTrader: 8 / 100%
Default

Quote:
Originally Posted by rareair View Post
You may want to reconsider the buffer tube before bringing it out for public viewing. That tube can accept a stock, and then can be configured as a SBR
does not matter, I dont own a A1 or A2 stock with an adapter hence I cannot be charged with constructive possession. The only other stock I own that is for an AR15 is a std carbine stock which wont work with that extension so its moot.

Check archived posts on ARFCOM, this has been covered to no end.

Regardless, Im going to permanently attach a screw or just remove the threading on it just to play things a bit on the safe side.
__________________
The California Moderate Centrist Militia member in exile

disclaimer:
everything I post is for arguendo and entertainment purposes only, and should not be construed to be legal advice
  #895  
Old 04-06-2011, 1:09 PM
DonFerrando's Avatar
DonFerrando DonFerrando is offline
Senior Member
 
Join Date: May 2010
Posts: 541
iTrader: 7 / 100%
Default

Quote:
Originally Posted by rimfire78 View Post
Sick!
  #896  
Old 04-06-2011, 3:05 PM
hotprowl's Avatar
hotprowl hotprowl is offline
Junior Member
 
Join Date: Mar 2011
Posts: 11
iTrader: 0 / 0%
Default

Here's mine

  #897  
Old 04-07-2011, 5:12 PM
tonelar's Avatar
tonelar tonelar is offline
Dinosaur
 
Join Date: Mar 2008
Location: El Paso
Posts: 6,082
iTrader: 118 / 100%
Default

Quote:
Originally Posted by fevillago View Post
Is 10.5 . I don't know about the twist. How can I tell by looking at it?
PM the answer and I will replay back if you wish.
Run a patch through it.... If it makes a half turn in 4.5 inches, it's a 1:9 twist bbl.
__________________
  #898  
Old 04-07-2011, 5:29 PM
wizard101 wizard101 is offline
Banned
 
Join Date: Jan 2011
Location: b/w moon & New York city
Posts: 132
iTrader: 0 / 0%
Default

Quote:
Originally Posted by hotprowl View Post
Here's mine

Any pics ABOVE the shoulder??????
  #899  
Old 04-08-2011, 10:20 AM
tacticalcity's Avatar
tacticalcity tacticalcity is offline
I need a LIFE!!
 
Join Date: Aug 2006
Location: Danvile, California
Posts: 10,456
iTrader: 150 / 100%
Default

Quote:
Originally Posted by hotprowl View Post
Here's mine

There's an AR in that picture? Where? I sure don't see it.
  #900  
Old 04-08-2011, 10:34 AM
rareair's Avatar
rareair rareair is offline
Senior Member
 
Join Date: Jul 2010
Posts: 1,898
iTrader: 57 / 100%
Default

Quote:
Originally Posted by tacticalcity View Post
There's an AR in that picture? Where? I sure don't see it.
Just below the boobies
__________________
MagPul MPLA
POF-USA P415-18-11T-223
TROY M7A1
& a bunch of SIG pistols and rifles

**WTB P227 TacOps**
  #901  
Old 04-11-2011, 3:55 AM
MrPlink's Avatar
MrPlink MrPlink is offline
I need a LIFE!!
 
Join Date: Mar 2010
Location: Portland / East Bay
Posts: 12,532
iTrader: 8 / 100%
Default

so a bit OT, but I finally got to fire mine (10.5 lmt) on Saturday, and dear god why didnt I build one earlier.

My buddy who is building one but hasnt finished yet brought along his 7.5in uppper with a YHM comp on it, and the concussive blast to the shooter is really monstrous. Just a tad worse and I say it would be unusable. You could feel it vibrate through your sinus cavity. My buddy actually had his nose start to run after a few mags. Not to mention it hilarious to have the loudest thing on the range be the smallest thing.

I know a lot of people write these off as a novelty, but I think they actually make a viable PDW type firearm.

Better and more pix to follow...
__________________
The California Moderate Centrist Militia member in exile

disclaimer:
everything I post is for arguendo and entertainment purposes only, and should not be construed to be legal advice
  #902  
Old 04-12-2011, 4:39 AM
AyeGuy's Avatar
AyeGuy AyeGuy is offline
Senior Member
 
Join Date: Jan 2006
Location: Rancho Cordova
Posts: 909
iTrader: 37 / 100%
Default

The YHM comp is unbearable to me on a 16" barrel....
  #903  
Old 04-12-2011, 6:43 PM
rattlesnake_nm rattlesnake_nm is offline
Banned
 
Join Date: Jan 2011
Location: Corpus Christi, Texas
Posts: 666
iTrader: 0 / 0%
Default

Quote:
Originally Posted by fonionrings View Post
For mine, it's already loose even sitting on the foam cover. I use zip-ties to keep it tight, and be aware that this does draw the sides lower, pretty much ruining it as an effective device for good cheekweld. But that's ok: it looks cool! And we all know that's the only thing that counts >=]


I know this is like 2 years later, but I am wondering if anyone has made the command arms saddle work? I am thinking about parachording under it til I get the desired thickness for a tight fit. Has anyone got this down yet? I am surprised no one has made a tube cover with a stock saddle incorporated yet.

Last edited by rattlesnake_nm; 04-12-2011 at 7:07 PM..
  #904  
Old 04-12-2011, 9:31 PM
tony56shooter's Avatar
tony56shooter tony56shooter is offline
Member
 
Join Date: Mar 2011
Location: S Butte Co.
Posts: 120
iTrader: 0 / 0%
Default

Quote:
Originally Posted by tacticalcity View Post
There's an AR in that picture? Where? I sure don't see it.
I was hopping to see the other side.
  #905  
Old 04-13-2011, 3:09 PM
rattlesnake_nm rattlesnake_nm is offline
Banned
 
Join Date: Jan 2011
Location: Corpus Christi, Texas
Posts: 666
iTrader: 0 / 0%
Default

Quote:
Originally Posted by impactco View Post
Could you post pics of this mod so I can lose the zip ties? Thanks.

+1
I am wanting to put my cca saddle on my rra pistol buffer tube.
  #906  
Old 04-13-2011, 5:22 PM
rareair's Avatar
rareair rareair is offline
Senior Member
 
Join Date: Jul 2010
Posts: 1,898
iTrader: 57 / 100%
Default

Quote:
Originally Posted by rattlesnake_nm View Post
I know this is like 2 years later, but I am wondering if anyone has made the command arms saddle work? I am thinking about parachording under it til I get the desired thickness for a tight fit. Has anyone got this down yet?
Good idea, just may have to try that
__________________
MagPul MPLA
POF-USA P415-18-11T-223
TROY M7A1
& a bunch of SIG pistols and rifles

**WTB P227 TacOps**
  #907  
Old 04-13-2011, 7:09 PM
MrPlink's Avatar
MrPlink MrPlink is offline
I need a LIFE!!
 
Join Date: Mar 2010
Location: Portland / East Bay
Posts: 12,532
iTrader: 8 / 100%
Default

Quote:
Originally Posted by AyeGuy View Post
The YHM comp is unbearable to me on a 16" barrel....
maybe thats it, havent tried one on a carbine or a rifle yet.
Obnoxious does not begin to describe it
__________________
The California Moderate Centrist Militia member in exile

disclaimer:
everything I post is for arguendo and entertainment purposes only, and should not be construed to be legal advice
  #908  
Old 04-13-2011, 11:30 PM
FNH5-7's Avatar
FNH5-7 FNH5-7 is offline
Calguns Addict
 
Join Date: Sep 2009
Location: A Third World Country Formerly Known as California
Posts: 9,369
iTrader: 155 / 100%
Default

  #909  
Old 04-14-2011, 10:27 AM
Hozr's Avatar
Hozr Hozr is offline
Senior Member
 
Join Date: Apr 2009
Location: Chico - NorCal
Posts: 818
iTrader: 14 / 100%
Default

My just completed Pistol.

Quentin 80%, YM Complete upper from Mark's Armory, Vorex Strikefire



__________________
Quote:
"Your offer to have my client "Cease and Desist" exercising his first amendment rights is rejected."
- Kilmer


Quote:
"Justice Sotomayor, states may have grown accustomed to violating the rights of American citizens, but that does not bootstrap those violations into something that is constitutional."
- Gura
  #910  
Old 04-14-2011, 1:19 PM
rareair's Avatar
rareair rareair is offline
Senior Member
 
Join Date: Jul 2010
Posts: 1,898
iTrader: 57 / 100%
Default

Quote:
Originally Posted by Hozr View Post
My just completed Pistol.


Those Quentin Defense lowers are simply beautiful. I purchased one a couple weeks ago to mate to a current pistol build of mine. Hopefully I'll be able to post completed pics Saturday afternoon
__________________
MagPul MPLA
POF-USA P415-18-11T-223
TROY M7A1
& a bunch of SIG pistols and rifles

**WTB P227 TacOps**
  #911  
Old 04-15-2011, 12:03 PM
SPR18's Avatar
SPR18 SPR18 is offline
Member
 
Join Date: Mar 2010
Location: bay area
Posts: 297
iTrader: 6 / 100%
Default

can you have 2 pistol upper and 1 pistol lower?
or if you change the upper later do you re DROS THE PISTOL?
  #912  
Old 04-15-2011, 2:14 PM
CSI304 CSI304 is offline
Member
 
Join Date: Jan 2011
Location: The Sewer
Posts: 408
iTrader: 63 / 100%
Default

Quote:
Originally Posted by SPR18 View Post
can you have 2 pistol upper and 1 pistol lower?
or if you change the upper later do you re DROS THE PISTOL?
From my research a few monthes back when building my own AR Pistol. I've talk to several gunshops and spend hours on the forums..

It seems that you can have as many pistol uppers (under 16inch barrel length) as you want, once you drosed and legally own a pistol lower.

You can swap the pistol uppers any time. There is no need to re DROS.
__________________
  #913  
Old 04-15-2011, 6:39 PM
ke6guj's Avatar
ke6guj ke6guj is offline
Moderator
CGN Contributor - Lifetime
 
Join Date: Nov 2003
Location: 909
Posts: 23,728
iTrader: 42 / 100%
Default

Quote:
Originally Posted by SPR18 View Post
can you have 2 pistol upper and 1 pistol lower?
that should be fine, as long as you dont have a shortage of rifle uppers for your rifle lowers. As long as you have at least one rifle upper for each rifle lower you have, then having spare pistol uppers for your pistol lowers should be ok.
Quote:
or if you change the upper later do you re DROS THE PISTOL?
why do you think you would need to reDROS a pistol you already own? DROS = Dealer Record of Sale, there was no new sale, no need for a new DROS.
__________________
Jack



Do you want an AOW or C&R SBS/SBR in CA?

No posts of mine are to be construed as legal advice, which can only be given by a lawyer.
  #914  
Old 04-16-2011, 11:04 AM
SPR18's Avatar
SPR18 SPR18 is offline
Member
 
Join Date: Mar 2010
Location: bay area
Posts: 297
iTrader: 6 / 100%
Default

Quote:
Originally Posted by ke6guj View Post
that should be fine, as long as you dont have a shortage of rifle uppers for your rifle lowers. As long as you have at least one rifle upper for each rifle lower you have, then having spare pistol uppers for your pistol lowers should be ok.
why do you think you would need to reDROS a pistol you already own? DROS = Dealer Record of Sale, there was no new sale, no need for a new DROS.
i thought it would be a different pistol bcz the regular ar is different than pistol, i need to build from a 80% lower or purchase a completed pistol so i thought they dros the upper/lower as a completed pistol.....anyway i'm new to ar pistol, i'm confuse too and specially i live in sf/ca
can you just buy a complete lower 1st and then get a upper like a regular ar???

Last edited by SPR18; 04-16-2011 at 11:10 AM..
  #915  
Old 04-16-2011, 12:51 PM
ke6guj's Avatar
ke6guj ke6guj is offline
Moderator
CGN Contributor - Lifetime
 
Join Date: Nov 2003
Location: 909
Posts: 23,728
iTrader: 42 / 100%
Default

Quote:
Originally Posted by SPR18 View Post
i thought it would be a different pistol bcz the regular ar is different than pistol, i need to build from a 80% lower or purchase a completed pistol so i thought they dros the upper/lower as a completed pistol.....anyway i'm new to ar pistol, i'm confuse too and specially i live in sf/ca
I'll try to answer as best I can, your post confuses me as well

for the most part, an AR upper is an AR upper, they are physically interchangalbe between AR rifle and AP pistol. Legally no, by physically yes.

In order to acquire an AR pistol, most people in CA either have to build an AR pistol from an 80% lower or buy one that is already assembled. But once you have that legal pistol, there is no need to reDROS it if you change the configuration.

Quote:
can you just buy a complete lower 1st and then get a upper like a regular ar???
for the most part, no, you can't just buy a pistol lower (even if it is completely assembled) and then put your own pistol upper on it. Reason being, you can't DROS that lower as a pistol if it isn't a complete pistol. Therefore, it gets DROSed as a long gun, and it might be illegal to assemble a long gun DROSed lower into a pistol. It might run afoul of CA's SBR laws.
__________________
Jack



Do you want an AOW or C&R SBS/SBR in CA?

No posts of mine are to be construed as legal advice, which can only be given by a lawyer.
  #916  
Old 04-16-2011, 1:18 PM
SPR18's Avatar
SPR18 SPR18 is offline
Member
 
Join Date: Mar 2010
Location: bay area
Posts: 297
iTrader: 6 / 100%
Default

Quote:
Originally Posted by ke6guj View Post
I'll try to answer as best I can, your post confuses me as well

for the most part, an AR upper is an AR upper, they are physically interchangalbe between AR rifle and AP pistol. Legally no, by physically yes.

In order to acquire an AR pistol, most people in CA either have to build an AR pistol from an 80% lower or buy one that is already assembled. But once you have that legal pistol, there is no need to reDROS it if you change the configuration.


for the most part, no, you can't just buy a pistol lower (even if it is completely assembled) and then put your own pistol upper on it. Reason being, you can't DROS that lower as a pistol if it isn't a complete pistol. Therefore, it gets DROSed as a long gun, and it might be illegal to assemble a long gun DROSed lower into a pistol. It might run afoul of CA's SBR laws.
thanks i just order a complete pistol, can't wait for it to come
  #917  
Old 04-16-2011, 7:15 PM
rareair's Avatar
rareair rareair is offline
Senior Member
 
Join Date: Jul 2010
Posts: 1,898
iTrader: 57 / 100%
Default

Quote:
Originally Posted by SPR18 View Post
thanks i just order a complete pistol, can't wait for it to come
Make? Model? Did you a get a deal?
__________________
MagPul MPLA
POF-USA P415-18-11T-223
TROY M7A1
& a bunch of SIG pistols and rifles

**WTB P227 TacOps**
  #918  
Old 04-17-2011, 12:10 AM
SPR18's Avatar
SPR18 SPR18 is offline
Member
 
Join Date: Mar 2010
Location: bay area
Posts: 297
iTrader: 6 / 100%
Default

i got the rra a4 10.3" i order throught a local ffl, i didn't shop around since not many avaliable in my area, as long as i got what i pay for, i'm happy
  #919  
Old 04-18-2011, 5:55 PM
j_bauer j_bauer is offline
Member
 
Join Date: Dec 2007
Posts: 180
iTrader: 143 / 100%
Default

Finally got it...

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]
  #920  
Old 04-18-2011, 8:35 PM
rareair's Avatar
rareair rareair is offline
Senior Member
 
Join Date: Jul 2010
Posts: 1,898
iTrader: 57 / 100%
Default

Quote:
Originally Posted by j_bauer View Post
Finally got it...

[IMG][/IMG]

Good looking pistol. Your first name wouldn't happen to be Jack would it?
__________________
MagPul MPLA
POF-USA P415-18-11T-223
TROY M7A1
& a bunch of SIG pistols and rifles

**WTB P227 TacOps**
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 5:35 AM.




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2021, Calguns.net an Incorporated Company All Rights Reserved.
All opinions, statements and remarks made by Calguns.net on this web site and elsewhere are solely attributable to Calguns.net.



Seams2SewBySusy