What did you reload today?

[eridepilot]

400 .45 ACP today
80 .308 win nossler ballistic tip three days ago
150 .223 rem a week ago

[Oceanbob]

100 rounds of 10MM. 3rd time for this batch. Had a few that had some burr's on the case-rim caused by the Extractor on my GLOCK 29. Removed them.

I can see that the case rim extractor interface is going to be a larger issue than case/resizing fatigue caused by shooting max loads (which these test rounds are).

One thing I noticed when running a normal Glock barrel and the StormLake barrel; the GLOCK barrel (being loose) really makes the 10MM cases bulge
almost full length. To the extent that a once fired GLOCK barrel case won't begin to fit into a STORMLAKE barrel. A once fired case from the STORMLAKE barrel bulges SO LITTLE that it even fits into the Dillon Case Gauge. !

That Stormlake barrel is TIGHT..!!!!

When I tumble this group (of 100) I can really tell which ones I shot in the GLOCK barrel as opposed to the STORMLAKE rounds.....the GLOCK cases require a bunch more pressure to resize.

I can see why for serious self defense shooting GLOCK barrels will feed just about anything.

Bob

[cjskalka]

40 test rounds of 7.62x39 using my own cast bullets.

[sonnyt650]

100 rounds of .223 w/ Hornady 68 grain BTHP bullets and 23.5 grains Varget. My brother-in-law just got a new upper and doesn't reload himself, don't know if we'll ever work up a load but the results with these will still be better than with cheap factory ammo. I prepped and primed the brass a while ago, so it was only an hour or so putting them all together.

[Chris M]

50 rounds of 44mag to celebrate my most recent firearm purchase...a 7.5" Ruger Redhawk. Too bad I can't fire them until next Thursday, due to the waiting period...and the fact that I won't be in town on the pick-up date (Duck Hunting at Sacrament NWR).

[EmmaGoldman]

9 different loads of 44 special (3 bullets x 3 powders) just need the gun to get here...

[Bongos]

200 of 6x45
150 of 223
prep about 200 brass in 223

[bruce381]

today 300 round 45 acp in a dillion 650

[Gowking]

Actually loaded yesterday but I didn't post then. 200 rounds of 45 for my Kriss Super V. R-P cases, Remington LP primers, 230 gr Zero Bullets hard ball on top of 5 gr HP-38. Shot okay, not really happy with the HP-38 compared to my last loads of Power Pistol. Both leave the cases pretty dirty but PP seems to run better.

-G

[foxtrotuniformlima]

about 500 rounds of 12ga trap loads.

[sfonelson]

This weekend I loaded 100 rounds of .223. I also prepped about another 200 rounds of .223 some some future bullet purchases.

Nosler 55gr Varmint
23.5gr H4895
LC Brass
CCI 5.56 small rifle primers

[z-bob]

I loaded fifty .41 Magnum cartridges, and lubed 230 .38 Special cast bullets (wadcutters) that I'll probably load Tuesday night after I get back from the shooting range.

[stormvet]

Past two days 1100 rounds of Rainier 165g plated .40.

[choprzrul]

Yesterday:

~350 .45acp 230gr rn Berry's

100 .30-30 170gr fp Hornady's

.

[Fiveohmike]

500rnds .45ACP with 230g Berry's

50 rounds .40SW with 165g Berrys.



950 rounds of .40sw to go

[Bongos]

fully prepped another 135 pc of 223 brass and FL another 200

[sniper5]

200 rounds .357 Magnum
50 rounds .38 +P
100 rounds 8x57 Mauser
50 rounds 7.5x54 MAS
50 rounds 7.5x55 Swiss

[707ace]

200 223 60gr vmax 27gr Varget because squirrels need more lead in their diet

[jwest]

.44M.

[Synergy]

250 .45ACP
Win 231 - 5.0g
Win LPP
Xtreme 200g SWC

Using this!

[bumpo628]

Sized and primed 400 12ga shotshells

[sfonelson]

I like this thread, it's fun to keep it going.

Last night I prepped and primed 200 .223. Just waiting on my projectiles and I'll load them up!

[joelogic]

I primed 10 9mm cases with wolf small rifle magnum primers as a test.

[thawein1856]

I rolled 5 .50AE rounds for my DE. want to try them out before I load the other 300 rounds.

[Black_Talon]

50 rds of 38 Spl 148gr HBWC ammo so I can shoot tomorrow.

[bucktooth7]

50 12 ga Win AA trap loads.

Win209 primer, 17.7 grains clays, CB1118 wad, 1 1/8 ounce #7.5 shot, crimped with love.

[z-bob]

Just finished loading 100 .38 Special wadcutters. (148 grain Lee bullet, 3.0 grains American Select, RP brass, Rem 1.5 primer)

I have another 100 Winchester cases ready to go, but not sure if I'll load the same thing or try a different powder charge. Probably keep going with this load until I run out of AS powder.

[BigBronco]

Only 50 rounds of 44 special. Berry's 240 gr with 7.7gr. Herco. Just finished. I plan on cranking out another hundred tomorrow then changing over the LnL Ap to load 1k of 38 special. I spent the last 3 days tumbling assorted brass and separating cases.

[Fishslayer]

400 rds of assorted .45ACP range fodder. Plated SWC & RN, LRN & LSWC. LRN & LSWC are Bear Creek moly coated. Plated are Berry's and X-treme.

[BigBronco]

Absolutely nothing, Had a garage sale and now I have some money for the gun show tomorrow.

[iareConfusE]

Woot, 200 rounds of .45ACP at max charge with Titegroup. Took me about 2 hours on a single stage while watching shows on Hulu and listening to music. Time well spent.

[tayman287]

300 rounds of 22-250
50- 50gr Ballistic Tips
50- 52gr Hornady Match
50- 52gr Sierra MK
50- 50gr Berger FB target
50- 50gr V-max
50- 52gr Nosler Custom Competition

[rcfb73]

set up the lee crimp die on stage 4 then loaded 100 rounds of .45ACP... 0 FTFs at the range 30 mins after i finished loading them

[sonnyt650]

Yesterday morning I sized around 100 .223 cases, though after a half dozen got one stuck (a rim tore off) and had to switch to the RCBS small base die to finish off the rest.

There was no way to save all the pieces. The decap pin was stuck deep in the case because of the long Lee expander hanging on the case neck. I had no stuck case extractor on hand and the drill bit would have eaten into the decap pin, so I knocked out the case using the decap pin as a punch.

Later on I found out Midway carries spare Lee .308 decap pins but not .223, so I'd need to call Lee directly. Instead I bought a complete replacement sizer as part of an RGB set, so I have an extra seating die. I also bought one of their hand presses so that along with that extra die I can do my ladder testing and load up cases with the best results at the range .

[jwest]

Some 0.44M 300 gr.

[sfonelson]

I trimmed, chamfured, deburred, and primed about 250 .223 last night. It seemed like it took forever, but really only took about an hour and a half.

I also cleaned, FL resized, decapped about 25 30-06 and 10 .223.

[moto510]

100 rounds of .416 Barrett
416 gr Lehigh projectiles
194 gr of US869 inside

[Bill Steele]

Well, my lot seems kind of puny when compared to those monster Barrett rounds...

I loaded a couple lots of .44 target rounds using some AA-#9. Trying to get to a slow enough powder to maybe ease the lead fouling I am getting using MBC 240gr LSWC's.

I also loaded 4 lots of 50 each, 9mm 115gr Montana Gold FMJ using three different powders I am trying: Bullseye, Unique, W231, starting light and working up.

I loaded the 9's in anticipation of getting my broken H&K P2000 back from, ah, H&K. Not so fast, I guess they have a lot of broken guns to fix as it has been almost 2 weeks and counting. Seems kind of slow to replace one of the gizzies on the sear axle. Oh well, maybe I will dig out the 92FS and see how she does with my hand loads....

[rockdogz]

Originally Posted by moto510

100 rounds of .416 Barrett
416 gr Lehigh projectiles
194 gr of US869 inside

Wow awesome!

[rockdogz]

I un-loaded 100 rounds of .38 today