1-6X scope options

[DrunkN_MastR]

That's an impressive lookin scope, at attractive price point. I think it just jumped to the top of my list. In for a 223/556, how about that discount Dimitri?

[PrimaryArms]

Originally Posted by DrunkN_MastR

That's an impressive lookin scope, at attractive price point. I think it just jumped to the top of my list. In for a 223/556, how about that discount Dimitri?

Not up to me but you might want to sign up for notification,the 7.62x39 version scope lasted 3 days before going out of stock! We have had an overwhelming amount of requests on it and other ACSS reticle optics.

Dimitri

[DrunkN_MastR]

Done - thanks for the suggestion!

[PrimaryArms]

Originally Posted by Cyberion

Yes! All the pieces are coming in and bingo...my PT 1-6X comes today! It's a true 1x. I'm excited.



Tube Diameter: 30mm
Magnification: 1-6X
Exit Pupil: Yes
Eye Relief: Yes
Magnification:
300 feet @ 100 yards at 1X
100 yds @ 100 yards at 6X
Reticle: Yes
Length: 11 inches
Net Weight: 1 oz.
Front and rear flip caps: extra
Fog resistant: Yes
Waterproof: Not
Focal Plane: NFP*
Lifetime Warranty--pay only for shipping

NFP=No Focal Plane

Suggested Retail: .15 cents
Shipping: $19.99

This Scope is PETA Approved.





What else are we going to do while waiting so long?

I will be stealing your reticle design for the ACSS gen3

-Dimitri

[Cyberion]

I will be stealing your reticle design for the ACSS gen3

No need to steal. I'll send you the design in exchange for one ACSS Gen2.

[JackRydden224]

The 7.62x39 1-6x is very nice. I look forward to getting a Gen 2!

[AntiScreed]

Waiting patiently for a .308 version.....

Sent from my SM-N900P using Tapatalk

[Calplinker]

I'm waiting for the 4-14 with ACSS reticle

[PrimaryArms]

Everyone get ready not up yet but they are here!!!



-Dimitri

[TOts]

Are you guys going to offer the RS regulate mount setup for this scope like you did for the 7.62?

[PrimaryArms]

Originally Posted by TOts

Are you guys going to offer the RS regulate mount setup for this scope like you did for the 7.62?

Don't know

-Dimitri

[Cyberion]

Dimitri:

I don't see this on PA website so I'll ask here. What size battery does PA 1-6x take? And does it come with one initial battery?

[fit1977]

Originally Posted by PrimaryArms

Everyone get ready not up yet but they are here!!!



-Dimitri

I have had money set aside to buy this. Just say when.

Sent from my SPH-L710 using Tapatalk

[REDPATCHUSMC]

I hope this is worth the wait!!

[PrimaryArms]

Originally Posted by REDPATCHUSMC

I hope this is worth the wait!!

A scope like this with the ACSS reticle under $300 ,If I were you I would sign up and be ready. The 7.62x39 version was gone in 3 days!!

-Dimitri

[fast318]

Dimitri,
What is your preferred method to setting this scope in the mount and do you have a cats tail that fits this scope?

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[PrimaryArms]

Originally Posted by fast318

Dimitri,
What is your preferred method to setting this scope in the mount and do you have a cats tail that fits this scope?

Sent from my SAMSUNG-SGH-I337 using Tapatalk

I like the Bobro mount not cat tail yet

-Dimitri

[Mute]

Originally Posted by PrimaryArms

I like the Bobro mount not cat tail yet

-Dimitri

What is the diameter of the magnification ring? One can always use an aftermarket cat tail like the one Vortex makes if the sizing fits.

[fast318]

Originally Posted by PrimaryArms

I like the Bobro mount not cat tail yet

-Dimitri

I don't mean the scope mount itself, I already have a Warne Ramp Mount for it. I mean how do you suggest leveling the reticle.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[bigkyle72]

Originally Posted by PrimaryArms

Everyone get ready not up yet but they are here!!!



-Dimitri

Dimitri, are these the .223/5.56 ones? When man when? I check the website 2-3 times a day and im signed up for the email notification! I have a big 3 gun match on the 3rd so I would LOVE LOVE LOVE to have this on my AR by then all zeroed and ready to rock!

[PrimaryArms]

Originally Posted by Mute

What is the diameter of the magnification ring? One can always use an aftermarket cat tail like the one Vortex makes if the sizing fits.

43.72mm / 1.71"
We might have some in the works ill have to check.

-Dimitri

[PrimaryArms]

Originally Posted by fast318

I don't mean the scope mount itself, I already have a Warne Ramp Mount for it. I mean how do you suggest leveling the reticle.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Got it!

I mount an anticant device then look through the scope at something level, tighten scope loose enough to turn and level out crosshair against a wall or anything straight n level confirm with anticant and tighten. I even cant a hair to account for spin drift!

-Dimitri

[PrimaryArms]

Originally Posted by bigkyle72

Dimitri, are these the .223/5.56 ones? When man when? I check the website 2-3 times a day and im signed up for the email notification! I have a big 3 gun match on the 3rd so I would LOVE LOVE LOVE to have this on my AR by then all zeroed and ready to rock!

Maybe 7-14 days!

Dimitri

[sunborder]

Any idea how quickly you guys will get another run in/if you will carry this regularly? I will likely not be able to afford it until next year unless I sell of my ACOG, which I really don't want to do at this point, unless you can tell me this glass is trijicon quality in terms of optics.

[Sniper3142]

Originally Posted by PrimaryArms

A scope like this with the ACSS reticle under $300 ,If I were you I would sign up and be ready. The 7.62x39 version was gone in 3 days!!

-Dimitri

Already signed up for email alerts. Just waiting for them to arrive!

[PrimaryArms]

Originally Posted by Sniper3142

Already signed up for email alerts. Just waiting for them to arrive!

I think people that sign up get a day notice or so. It will be one per house hold so if you need more make plans now.

Dimitri

[89LT1]

This cat tail doesn't fit this scope?
http://https://www.primaryarms.com/3...m-p/gs-400.htm

[sunborder]

Looking at the ADM mounts, is there an appreciable difference between the scout and recon mounts? I see that one has two levers vs one. On a scope this size, is it going to have any real difference in return to zero, etc? I'm not planning on banging on it with a mallet or anything...

[Cyberion]

This cat tail doesn't fit this scope?

I doubt it. Look at the reviewers below that.
=======================
Don't waste your money on plastic December 3, 2013
Reviewer: disappointed from SAN TAN VALLEY, AZ United States
I didn't realize this was a plastic piece. It is undersized obviously not designed for the PA 1-6 scope. It broke during installation.
======================

I've bookmarked a potential alternative I read about. No idea if it will fit properly so if anyone wants to be first to it please provide feedback. I know it will fit around the scope but wonder about the clearance underneath it since I'll be running a magpul backup under it.

Check this out...amazon or ebay search on "Breakaway Nylon Coaster" Read the reviews.
http://www.amazon.com/Breakaway-Nylo...Nylon+Coasters

[LBDamned]

Originally Posted by PrimaryArms

43.72mm / 1.71"
We might have some in the works ill have to check.

-Dimitri

same size as Burris E1 and Swarovski Z-5 - which is MGM Switchview 167-171SV: http://www.mgmswitchview.com/switchv...itchview-lever

and close to Leupold MK6 & MK8 (7.09) MGM # 167-171SV1: http://www.mgmswitchview.com/switchv...itchview-lever

or their Eagle Eye universal throw lever: http://www.mgmswitchview.com/index.p...products_id=27 (three pack here): http://www.mgmswitchview.com/switchv...-universal-fit

Originally Posted by Mute

What is the diameter of the magnification ring? One can always use an aftermarket cat tail like the one Vortex makes if the sizing fits.

MGM makes their throw levers...

[inthegame]

I been researching ADM mounts for this and found no real difference in reviews from the Scout to the Recon versions. Found a thread where ADM stated the dual latch caused some uppers to stiffen up a bit, not sure what that means. ............
The email I got back from ADM today basically said all the Recon does is add a longer clamping surface but that either one would do well. They did say that they have gotten some people that report the Recon "stiffens" the upper.
I think I'm going with the Scout and save a little weight/rail space. .................

To each his own i take it. Otherwise, its 2 latches for an extra $20. And as everyone believes more is better and If youd prefer not to question your setup if SHTF. I made the decision to go with the 1 latch slightly lighter version as ADM backs them up equally.

Waiting eagerly for this scope. I will be putting it with the ADM Scout mount. not the extended version as i dont plan to shoot nose to charging handle.

[LBDamned]

Originally Posted by inthegame

I been researching ADM mounts for this and found no real difference in reviews from the Scout to the Recon versions. Found a thread where ADM stated the dual latch caused some uppers to stiffen up a bit, not sure what that means. ............
The email I got back from ADM today basically said all the Recon does is add a longer clamping surface but that either one would do well. They did say that they have gotten some people that report the Recon "stiffens" the upper.
I think I'm going with the Scout and save a little weight/rail space. .................

To each his own i take it. Otherwise, its 2 latches for an extra $20. And as everyone believes more is better and If youd prefer not to question your setup if SHTF. I made the decision to go with the 1 latch slightly lighter version as ADM backs them up equally.

Waiting eagerly for this scope. I will be putting it with the ADM Scout mount. not the extended version as i dont plan to shoot nose to charging handle.

I use Recon (two latches) for longer, heavier scopes... For 1-4 and 1-5 I use Scout...

I would use a Scout for this scope too...

[JCorc80]

Im saving my pennies for a Vortex Razor in a Bobro mount... It may take a few months, but should be worth it!

[Mute]

Question about the ACSS reticle. Since the holds appear to be set for a 100 yard zero, what you do you use below 100 set at 1x? I know you can use a center hold on a torso sized target without much issue, but what about on smaller targets?

[bigkyle72]

Originally Posted by Mute

Question about the ACSS reticle. Since the holds appear to be set for a 100 yard zero, what you do you use below 100 set at 1x? I know you can use a center hold on a torso sized target without much issue, but what about on smaller targets?

How small of a target? There isnt much drop/rise under 100 yards so holding on the center dot should be almost dead on

[PrimaryArms]

Originally Posted by Mute

Question about the ACSS reticle. Since the holds appear to be set for a 100 yard zero, what you do you use below 100 set at 1x? I know you can use a center hold on a torso sized target without much issue, but what about on smaller targets?

? How small and at what range?
Dimitri

[crufflers]

Originally Posted by PrimaryArms

This month or early next

Dimitri

Did I miss the batch?

[PrimaryArms]

Originally Posted by crufflers

Did I miss the batch?

No but get ready should not be long

Dimitri

[AntiScreed]

7.62 X 51 will be available. ....

Sent from my SM-N900P using Tapatalk

[crufflers]

Originally Posted by PrimaryArms

No but get ready should not be long

Dimitri

Well, I am sure I will have a chance to order one before my PSA order ships. As long as it is in the next 2-3 weeks. Otherwise I'll wait for you unless I get ansty and order an EOTECH and PA magnifier package from you, hahah... nope I am going to wait.