Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > INTERESTS AND ACTIVITIES > Gunsmithing & How To
Register FAQ Members List Calendar Mark Forums Read

Gunsmithing & How To Pro, Amateur & WECSOG and Tutorials, Guides & OLL Build Instructions

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-25-2014, 1:41 PM
VaderSpade's Avatar
VaderSpade VaderSpade is offline
Vendor/Retailer
CGN Contributor
 
Join Date: Mar 2009
Location: In the hills above Redding, CA
Posts: 4,222
iTrader: 61 / 100%
Default Vader Spadeís Machining a Tactical Machining 80% 1911 Frame with a Small Mill

This is the way I do it; the machining guys will say there is a better way. And Iím sure there is, but if you donít want to spend thousands on edge finders, electronic probes, and other overpriced measuring devices this method will work just fine. Hell one of those machinist guys posted up a link to a $1,200.00 level. I donít need anything THAT level.
I square everything up with a piece of paper. I try to use recycled paper but Iíll admit I sometimes just grab a new piece from the printer.

Letís get started by marking everything out (mostly for the camera) I didn't have any layout fluid (Dykem) so I just used a green sharpie.



I used a caliper to scribe two lines. The first one is .099 from the top and the second .2170. This should give you .1180 between the lines. I plan to keep the lines until I get to the file work.




Here you can see the lines.




The jig is in the vise ready to get started.


__________________

Check out my engraving gallery on my website, Thanks
http://vadertactical.com/engraving-gallery

Last edited by VaderSpade; 07-25-2014 at 2:03 PM..
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 9:39 PM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2018, Calguns.net an Incorporated Company All Rights Reserved.
Calguns.net and The Calguns Foundation have no affiliation and are in no way related to each other.
All opinions, statements and remarks made by Calguns.net on this web site and elsewhere are solely attributable to Calguns.net.