|
Rimfire Firearms .22, .17 and other Rimfire Handguns and Rifles |
|
Thread Tools | Display Modes |
#3
|
||||
|
||||
I was going to say that; isn't the front sight just dovetailed in? So a barrel vice, brass punch and hammer?
__________________
/Chris I have a perfect Burning Man attendance record: zero. You do know there are more guns in the country than there are in the city. Everyone and their mums is packin' round here! Like who? Farmers. Who else? Farmers' mums. |
#4
|
||||
|
||||
Ditto.
Just rest the barrel on something, get a brass punch out, and tap the sight out of the dovetail. It's super easy.
__________________
Please read the Calguns Wiki Quote:
|
#6
|
||||
|
||||
^That's Step 2.
__________________
/Chris I have a perfect Burning Man attendance record: zero. You do know there are more guns in the country than there are in the city. Everyone and their mums is packin' round here! Like who? Farmers. Who else? Farmers' mums. |
#7
|
||||
|
||||
I just supported the barrel on a 2x4/towl and used a punch and hammer. Just give it a good whack right off the bat, little taps don't work.
Are you changing to Tech sights? I have some and they are great, I get under 1" groups at 25m with a bone stock 10/22 |
#8
|
||||
|
||||
Worked perfect! Thanks and I went with the archangel kit so you have to remove the front sight...havent made my mind up as far as a scope or sights goes yet
__________________
J.T. |
#9
|
||||
|
||||
I was going to suggest a blowtorch
__________________
In any type of fight, & especially gun fights, there are no winners ..... just varying degrees of losers. The only fight you win is the one you never get into. NRA Certified Instructor Rifle, Pistol, Shotgun, Home Firearms Safety,Muzzleloading, Personal Protection Series, Chief Range Safety Officer, Refuse to be a victim Regional counselor |
#12
|
||||
|
||||
__________________
Please read the Calguns Wiki Quote:
|
#14
|
||||
|
||||
Heh, I'd sell you mine if I could find it!
__________________
Please read the Calguns Wiki Quote:
|
#15
|
||||
|
||||
Quote:
|
#16
|
||||
|
||||
Quote:
Thought it might be directional since so many dovetails are that way. THANKS. |
#17
|
||||
|
||||
Best way to remove 10/22 factory sights - replace with match barrel. Problem soved!
__________________
The thing with firearms is that they are not like any other consumer product, simple ownership of one carries a lot of responsibility. Some idiots are too busy knowing it all to ever learn anything "...this isn't a perfect world. It's California." |
Thread Tools | |
Display Modes | |
|
|