|
Rimfire Firearms .22, .17 and other Rimfire Handguns and Rifles |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Marlin 795 thread
Just thought it would be a good idea to start a thread on the Marlin 795 as I am sure there were a few calgunners that bought these recently. I picked one up at Big 5 for $187 otd, but it has a $20 rebate from Marlin to bring it down to $167. Not bad for a nice little .22 semi. Some of the free states had them for $120 or less with the rebate.
I could have gotten a 10/22 for $80-100 more but I just wanted an inexpensive plinker to teach rifle fundamentals to new shooters and pop some soda cans. Besides, that money will buy me 5-6 bricks of ammo. In case anyone is interested in getting one, the sale at Big 5 is over (it does come back pretty regularly) and you can still get the rebate from Marlin so you might be able to find it elsewhere. Sports Authority and a bunch of other places actually. http://www.marlinfirearms.com/PDFs/2...ebate-Form.pdf (This is the new Marlin 795 rebate for $25, expires 12/31/11) There is also a thread in the centerfire rifle forum about these. http://www.calguns.net/calgunforum/s...ghlight=marlin Specifications: Caliber: 22 Long Rifle Capacity: 10-shot nickel-plated clip magazine Action: Autoloading; side ejection; automatic "last-shot" bolt hold-open; manual bolt hold-open; cross-bolt safety. Stock: Monte Carlo black fiberglass-filled synthetic with swivel studs and molded-in checkering. Barrel: 18" with Micro-Groove® rifling (16 grooves). Twist Rate: 1:16" r.h. Sights: Adjustable open rear, ramp front sight. Receiver grooved for scope mount. Overall Length: 37" Weight: 4.5 lbs. Link to the owner's manual from Marlin's website: http://www.marlinfirearms.com/pdfs/m..._22LRMACH2.pdf Some goodies for the 795: You can get Tech Sights for this rifle that are probably an improvement from the stock sights: http://www.tech-sights.com/ ATI also makes a stock for it, if you want a pistol grip. Shown on a 60 (same receiver) but its supposed to fit the mag fed models as well: *EDIT - Emailed ATI, they stated that this stock should fit but would require "minor" fitting around the magazine well.* http://www.atigunstocks.com/products...9&page=1&id=28 As they come from the factory: After the average calgunner gets a hold of it! Feel free to add anything helpful or just show yours off, I'll have some pics of mine up soon! Last edited by Capt Jack; 01-19-2012 at 6:01 PM.. |
Thread Tools | |
Display Modes | |
|
|