CERAKOTE, LASER ENGRAVING, SLIDE CUTS, PORTING, SIGHT INSTAL, PARTS INSTAL- IN OC!!

[Batman]

Of course, a Grand Reopening Calguns Special wouldn't be hard to look at either.....

[shutmdown]

Originally Posted by my1911tle

This Sig is so freakin nice. While I had it apart I did a trigger polish to sub 4 pounds. Matt from OC installed these Dawson fiber optic sights for me. This is the sweetest .40 cal I've ever owned. Tungsten rocks!

wow awesome work. I am looking to something like this care to PM me how much it cost?

[xdcharlie]

Just picked my lower I had done here. Nothing but good things to say about them. Professional, polite, not opinionated, answered all my questions and some.

Thanks for the awesome job Matt.
will be back to get my 308 done like we discussed.

[lc*y]

Cerakoted at OC Coating, job well done. Thanks Matt!

SA 1911 compact note.jpg

[camaroguy2012]

How long is the turn around? I am looking to get a striped upper/lower and rail done in burnt bronze

[LBDamned]

it was a weird journey... initially I was after a lightweight AR (trying to get as light or lighter than previous 4lb, 7.5oz with poly lower)...

had a completed 80%-100% lower skeletonized - but it wasn't as light as I had hoped, and I wasn't real fond of the lattice look (even though it was incredibly detailed and cool, it wasn't what I was after)... So I asked them to cut as much material as possible... the end result was a bit lighter, but still had some lattice in critical areas of structural integrity...

Making the best of what I had, I came up with the idea of an American Flag "theme" without actually painting the flag... the idea was to have the holes in lattice resemble stars on flag... exterior blue, interior white... the rest is self explanatory (pics)... ended up at 5 lbs, .5 (half) oz...

As always, OCCC did an awesome Cerakote job!

[tvfreakarms]

That lower looks very fragile

2 by 2...hands of blue

[LBDamned]

Originally Posted by tvfreakarms

That lower looks very fragile

2 by 2...hands of blue

Short of running it over with my truck, I tried to crush it - and it won't...

There's no stress at the mag well... Critical areas are plenty secure....

[tvfreakarms]

I'm curious how it will hold up. Not bad on the lower. That's a lot of material taken off

2 by 2...hands of blue

[LBDamned]

Originally Posted by tvfreakarms

I'm curious how it will hold up. Not bad on the lower. That's a lot of material taken off

2 by 2...hands of blue

It's definitely a novelty gun - and I have no doubt it will hold up to the light range work it's intended for...

Most of my defense guns (that will take a beating) are black and not fancy.

[tvfreakarms]

I say use it more and c how it will hold up. That way maybe if there is any weak points u can remedy it

2 by 2...hands of blue

[DJMenace]

Sniper Grey! I want to have my 1911 TRP done.
You have photos of firearms done in sniper grey


Sent from my iPhone using Tapatalk

[LBDamned]

Originally Posted by DJMenace

Sniper Grey! I want to have my 1911 TRP done.
You have photos of firearms done in sniper grey


Sent from my iPhone using Tapatalk

If there's not one (or more) in the thread, check their site - they have lots of photos http://occustomcoating.com/test-gallery

[z98]

After reading all the positive reviews I figured I would try OCCC. I had an issue after I got my new rifle back from being coated(Surgeon action/Krieger barrel) . I figured out after going to the range they left sand from the blasting process in the ejector so it wouldn't chamber a round. I wasn't impressed with how they handled my issue and wasted range trip. Friendly staff isn't so friendly after you have a problem. Unfortunately, after my experience I will not be using them again.

[OC Custom Coating]

Originally Posted by z98

After reading all the positive reviews I figured I would try OCCC. I had an issue after I got my new rifle back from being coated(Surgeon action/Krieger barrel) . I figured out after going to the range they left sand from the blasting process in the ejector so it wouldn't chamber a round. I wasn't impressed with how they handled my issue and wasted range trip. Friendly staff isn't so friendly after you have a problem. Unfortunately, after my experience I will not be using them again.

Z98, This is Paul the owner of OC Custom. I am very sorry to hear that you had an issue and I apologize for the inconvenience. We work very hard to ensure that any firearm that leaves our shop is flawless with the coating and functioning properly. I have already had a meeting with my armorer and prep team regarding this to ensure we don't have this issue again.

I know our shop manager offered to fully correct the issue for you and to give you a credit toward any future work. I'm sorry to hear that you did not feel that was sufficient and that our staff was wasn't friendly. I will contact you directly and see if I can help resolve the issue.

[z98]

Thank you Paul, I look forward to talking with you.

[SoCalGunny]

Evening, I'm looking for someone who does anodizing and see you dabble in several types of coatings.

A few of us are looking to get our Cz 75 tactical sports grips orange and i know plenty of others that would jump on the chance to make it happen.

Thank you for your time.

[iMigraine]

Tagged

[OC Custom Coating]

Originally Posted by SoCalGunny

Evening, I'm looking for someone who does anodizing and see you dabble in several types of coatings.

A few of us are looking to get our Cz 75 tactical sports grips orange and i know plenty of others that would jump on the chance to make it happen.

Thank you for your time.

Hey SoCalGunny, our shop does not offer anodizing but we do offer Cerakote which is a ceramic based coating. We can match up the Cerakote to anodizing if you are looking to match up parts. We coat for many firearm and parts manufacturers who prefer Cerakote over anodizing. Feel free to call or come by our shop and we discuss some of the pros and cons. Thanks #714-202-7552

[OC Custom Coating]

Here's some recent work we completed in the last week…

Custom Slide Cuts:



Custom Slide and Barrel Porting:



Urban Snakeskin:

[TopGuns]

SPS Tactical in FDE. Awesome job OCCC. Thanks again!

Kevin

[txxp]

I am very interested in having you guys Cerakote a Colt Government 1911 that I have. What is the rough turnaround time for a complete 1911? PM me if you need any additional information. Thank you and cheers.

Rob

[darkjedi351]

Originally Posted by txxp

I am very interested in having you guys Cerakote a Colt Government 1911 that I have. What is the rough turnaround time for a complete 1911? PM me if you need any additional information. Thank you and cheers.

Rob

if you're really inquiring about turnaround and such, you should PM or call them. they're busy enough.

[txxp]

Thanks for the heads up and I will give them a call. Cheers

[Godbetheglory]

tagged

[guest1]

Originally Posted by SoCalGunny

Evening, I'm looking for someone who does anodizing and see you dabble in several types of coatings.

A few of us are looking to get our Cz 75 tactical sports grips orange and i know plenty of others that would jump on the chance to make it happen.

Thank you for your time.

^^This
Also hard chrome finish service?

[BravoRaider]

do you have any more photos of camo jobs?

[z98]

Originally Posted by z98

Thank you Paul, I look forward to talking with you.

Paul called me and worked out my issues. Thank you Paul

[1911RONIN]

Originally Posted by OC Custom Coating

Here's some recent work we completed in the last week…



Custom Slide Cuts:







Custom Slide and Barrel Porting:







Urban Snakeskin:

Love the snakeskin. Can you post some other variations?


Sent from my iPhone using Tapatalk

[gmduran1]

Originally Posted by dmjerrywest44

Care to share what color that is? That is simply gorgeous.

[OC Custom Coating]

Below are a few recent projects...
Please be sure to call or email if you want to reach us (714-202-7552 info@occustomcoating.com). We are not always on the Calguns forum but we do check our emails and calls daily.

[PlayHard]

Do you do custom slide cuts, to mount a red dot to a Springfield XDm?

[dmjerrywest44]

1911 by J M, on Flickr

[wynn]

^^

Well damn! Thanks for the desktop pic

[OC Custom Coating]

We recently moved to a larger facility. Come visit us at:

3164 E La Palma Ave Unit L
Anaheim, CA 92806

[OC Custom Coating]

BTT

[OC Custom Coating]

BTT

[OC Custom Coating]

BTT

[viet4lifeOC]

Originally Posted by OC Custom Coating

How much for the slide mill cut on a block 19

Do you do black nitride coat?

Went to your website, but couldn't find a price list for slide mill cuts

Thanks

[OC Custom Coating]

Hey friends, please contact us through phone or email with any questions.

info@occustomcoating.com

714-202-7552

All the work we do is custom and each project varies in time and cost. We would love to discuss your project with you and get you an accurate quote. Just give us a call or send an email and we will gladly help you through your next custom project.