|
Centerfire Rifles - Semiautomatic or Gas Operated Centerfire rifles, carbines and other gas operated rifles. |
|
Thread Tools | Display Modes |
|
#5
|
||||
|
||||
I see how this one works. The plate is bigger, thus only able to fit behind the top of the release. The screw keeps it from moving out; either under the trigger guard or by giggling it out sideways through the bottom of the mag release. Correct More?
__________________
Antelope Valley grown, now State of Jefferson transplant. |
#6
|
||||
|
||||
The screw sucks up the plate which wedges the mag release preventing it from moving. +1 on what fal said. The screw head is big enough to prevent it from sliding through and both pieces clamp down on the mag release spring so it will be under tension and won't come loose even if you don't use loctite. It's that simple, now give me $20 bucks for telling you my secret haha
Last edited by morepoop4u; 07-23-2006 at 11:46 PM.. |
#7
|
|||
|
|||
Am starting on my first AK build, I live in SoCal, and this is the COOLEST! Makes it easy to install and remove as needed, and still complies with the "reasonable and fair" California regulations.
Thank you for sharing and encouraging us to steal, or Borrow, your design. Thank you! |
#8
|
||||
|
||||
There are better designs now. With this device, you have to feed from the ejection port. Can't drop your mag like with the newer "bullet button" designs.
__________________
"On bended knee is no way to be free." - Eddie Vedder, "Guaranteed" "Let your gun therefore be the constant companion of your walks." -Thomas Jefferson, in a letter to his nephew Peter Carr dated August 19, 1785 |
#9
|
||||
|
||||
Better is all in the eyes of the beholder.
__________________
Protect your integrity like you would protect your life. |
#10
|
||||
|
||||
Buy this one and bypass the other designs:
http://www.calguns.net/calgunforum/s...ad.php?t=93866 Oh, and by the way:
__________________
Check out our e-commerce site here: www.ebrworks.com Serving you from Prescott, AZ Last edited by EBR Works; 01-22-2009 at 11:24 AM.. |
#12
|
||||
|
||||
__________________
Check out our e-commerce site here: www.ebrworks.com Serving you from Prescott, AZ |
#13
|
||||
|
||||
Im going for the real look, not function. I only have 1 mag and will rarely shoot it anyways but gives it the best overall look. Next is the raddlock but the fat pin throws the look off, which is what I have on it right now. I also just ordered the other day the ak bullet button, so I always have that option too just not sure how it will look on the rifle.
__________________
|
#14
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|