EDC Folder Suggestions?

[Citizen_B]

Looking for a sub-3" blade, locking pocket folder, drop-point, quick and assisted opening, adjustable clip position, on the lighter-weight side. I'm not a metalphile so preference on lower cost, but would pay for a better package. Any suggestions?

Currently have a Kershaw Cryo (1555G10) which I don't have any complaints about. There's a lot of nice knives out there at 3" exactly which technical is over my counties lawful length.

[Steponmytoes]

Mini griptilian is a great option, super fast, light and strong but pricey because its u.s. made. Some people argue that it had one of the fastest deployment.

Kershaw Leek is another option. Small blade with assist but not a drop point.

[Steponmytoes]

Brandwise I would also look at crkt, good value fland designs

https://www.amazon.com/gp/aw/d/B00I0...=61hr%2BSEGliL

[jeffrice6]

Originally Posted by Steponmytoes

Brandwise I would also look at crkt, good value fland designs

https://www.amazon.com/gp/aw/d/B00I0...=61hr%2BSEGliL

I'd stay away from crkt folders..... Had a liner locker fail & cut me (under normal operation) could have been a lot worse but I no longer trust their folders!

[Citizen_B]

I do like the Leek, however it's listed spec is 3" exactly.

The Mini Griptilian had always been on my radar but I've never handled one. Might have to give it a try.

[Maltese Falcon]

Kershaw 1551 TI Hinderer Design

https://kershaw.kaiusaltd.com/knives/knife/cryo

.

[Citizen_B]

Originally Posted by Maltese Falcon

Kershaw 1551 TI Hinderer Design

https://kershaw.kaiusaltd.com/knives/knife/cryo

.

I do like this design. I have both the G10 and Blackwash versions.

I just ordered a SOG Flash 1 to try out.

[CJJohn]

ZT... it is the best knife I have ever owned. I carry a ZT 0300 every day.

https://www.knivesplus.com/zerotoler...00zt-0300.html

[therealnickb]

Originally Posted by Citizen_B

I do like the Leek, however it's listed spec is 3" exactly.

The Mini Griptilian had always been on my radar but I've never handled one. Might have to give it a try.

Grind the tip a hair?

[therealnickb]

Originally Posted by CJJohn

ZT... it is the best knife I have ever owned. I carry a ZT 0300 every day.

https://www.knivesplus.com/zerotoler...00zt-0300.html

ZT 0300 Knife that features a 3.75" drop point blade

[crufflers]

Originally Posted by Citizen_B

Looking for a sub-3" blade, locking pocket folder, drop-point, quick and assisted opening, adjustable clip position, on the lighter-weight side. I'm not a metalphile so preference on lower cost, but would pay for a better package. Any suggestions?

Currently have a Kershaw Cryo (1555G10) which I don't have any complaints about. There's a lot of nice knives out there at 3" exactly which technical is over my counties lawful length.

So if you have a CRYO that meets all requirements, why are you looking? CRYO is a good cheap import knife that works fine. I had a G10 model for a while and gave it away, but it was one of the best small import Kershaws.

They have so many models, just go to the site and filter for 2-3" blades in your price range then check tech specs for 2.75" or 2.9" blades. Seem to be many nice looking ones...

https://kershaw.kaiusaltd.com/knives/knife/fraxion

https://kershaw.kaiusaltd.com/knives/knife/pico

[jeffrice6]

USA built Spyderco

[BigPimping]

I keep an NRS pilot knife in my truck. That thing looks pretty durable. And also very useful in case of emergency. It should be, it's designed for water rescue.

[crufflers]

The 2.9" bladed ZT's that come to mind are the 0450's - better for smaller hands though.

[Citizen_B]

Originally Posted by crufflers

So if you have a CRYO that meets all requirements, why are you looking? CRYO is a good cheap import knife that works fine. I had a G10 model for a while and gave it away, but it was one of the best small import Kershaws.

I like the Cryo and it does meet my requirements, however I'm not a knife guy so I don't know what I don't know.

I just received a SOG Flash 1. My first impression likes:

- Very light and compact.
- Clip is reversible and positioned high so only the clip shows while in pocket.
- Opens well for a thumb stud spring assist.

Dislikes:

- Very light and compact. Handling isn't as easy as a slightly larger knife. The index finger groove is awkwardly close to the next finger groove.
- A little bit of blade play.
- Blade lock seems unnecessary and point of failure.
- The blade lock rattles a bit while blade is closed. We'll see if this is an issue in pocket.
- (preference) Because of small size, thumb stud is not as easy to open vs. larger knife or flipper.

Overall, it feels like a cheaper made knife but still can serve a function at a nice price. I think I'll find some use of it, but the search continues. Might have a spend a few more bucks for more premium models.

[Baxter]

Kershaw "needs work" had it for at least six years