![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
Ammo and Reloading Factory Ammunition, Reloading, Components, Load Data and more. |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
This is an update to my previous post on an awesome deal I got from a Calgunner.
Well I'm almost down with my first pound bottle of powder and and very happy with my purchase. It was worked very well for for what I spent on it. Best $100 I've ever spent. I would buy a new one if I had the need for one. I cleaned it per Cowboy T videos and installed a new ratchet gear in it. Thank you cowboy T for very informative videos. Only problems I've had with my reloads was two failure to go into battery due to primers not being seated completely. I have learned the feel of a primer seating completely and all is good now. Time to buy more powder. |
#2
|
||||
|
||||
![]()
i remember you getting this awesome deal! im still getting used to reloading.. i just started not too long ago.. i just reloaded 100 rounds of .45... so far so good..now i just need to go test the loads out -.-
Quote:
|
#3
|
||||
|
||||
![]()
Awesome! Reloading is a awesome hobby in the shooting world.
Quick tip on checking primers. Put the made rounds primer side up in a ammo box/tray and feel across the primers to make sure they are all set correctly. |
#4
|
|||
|
|||
![]()
I bought my two Lee Pro 1000's for less than $100 bucks each, used. They have been pretty rock solid for tens of thousands of rounds. As long as you know the feel of the press, they will operate trouble free. A little trick I found that helps with the priming system is to disable the case sensor so the primers feed a little more freely onto the priming ram. The downside is that if there is no case present, you have to pluck the primer from the ram and set it to the side, but once I started doing this I have very rarely had any problems with primers going in sideways, etc.
Also, keep that loaded round chute polished with some steel wool and your finished rounds will slide out completely more frequently. Glad to hear other people having success with this press. It seems they do get a lot of negative reviews for things that can easily be fixed. |
#5
|
||||
|
||||
![]() Quote:
Quote:
Quote:
|
#6
|
||||
|
||||
![]()
Glad it's working out well! My .38/357 Pro 1000 is very close to the 40,000 round mark. It's running steadily and solidly. The .44/.45LC press is coming up quickly on 10,000.
One thing I have found recently that helps a bit with the big-bore cases like .44 Magnum and .45 Long Colt, due to the larger surface area of those cases. The sizing die is carbide, so no case lube is necessary. However, a quick shot of some Hornady's One Shot lube makes those big-bore cases go in extra-smoothly. I'm talking silky-smooth. Doesn't take much at all, just a quick spritz. Probably makes things a little easier on the brass case itself, too.
__________________
"San Francisco Liberal With A Gun" F***ing with people's heads, one gun show at a time. Hallelujah! http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos) http://www.liberalsguncorner.com (podcast) http://www.youtube.com/sfliberal (YouTube channel) ---------------------------------------------------- To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism. |
#7
|
|||
|
|||
![]() Quote:
|
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
![]() |
![]() |