Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > FIREARMS DISCUSSIONS > Rimfire Firearms
Register FAQ Members List Calendar Mark Forums Read

Rimfire Firearms .22, .17 and other Rimfire Handguns and Rifles

Reply
 
Thread Tools Display Modes
  #1  
Old 06-21-2012, 7:21 AM
pennys dad's Avatar
pennys dad pennys dad is offline
CGSSA President
CGN Contributor - Lifetime
 
Join Date: Feb 2008
Location: CA
Posts: 5,663
iTrader: 181 / 100%
Default Modification "How To's" Archive

Lets put together an archive of Modification "How To's" and the videos used to make them happen

Remember this is a "How To" mod thread.

If you have favorites, submit them on this thread, we can start collecting here. Provide as much information as possible, do not assume that it is just known, frame the modification and list make, model and other important information.
__________________
Warmest Regards

Jacob Rascon, (aka) Pennys Dad
President of CGSSA
CALGUNS Shooting Sports Association.
Jacob@CGSSA.Org

Something to be Thankful for: “To the world you may be one person but to one person you may be the world.”

Last edited by pennys dad; 06-21-2012 at 8:16 AM..
Reply With Quote
  #2  
Old 06-21-2012, 7:26 AM
defcon defcon is offline
.22LR Riffle
CGN Contributor
 
Join Date: Aug 2011
Location: Thousand Oaks/SFV
Posts: 2,879
iTrader: 26 / 100%
Default

Some aftermarket, airsoft and WWII stocks

Ruger 10/22 Barrett M82A1 and Marlin XT-22 M200 Cheytac Intervention


Ruger 10/22 H&K SL8


Marlin XT-22 L96 AICS


Marlin XT-22 Blaser LRS1


Ruger 10/22 Archangel M1A


Ruger 10/22 Archange Sparta
Reply With Quote
  #3  
Old 06-21-2012, 7:27 AM
defcon defcon is offline
.22LR Riffle
CGN Contributor
 
Join Date: Aug 2011
Location: Thousand Oaks/SFV
Posts: 2,879
iTrader: 26 / 100%
Default

Marlin 795 L85


Ruger 10/22 AUG


Ruger 10/22 PS90


Ruger 10/22 FS2000


Ruger 10/22 Beretta RX4 Storm


Ruger 10/22 M14 EBR and Marlin 795 Tavor TAR21
Reply With Quote
  #4  
Old 06-21-2012, 7:27 AM
defcon defcon is offline
.22LR Riffle
CGN Contributor
 
Join Date: Aug 2011
Location: Thousand Oaks/SFV
Posts: 2,879
iTrader: 26 / 100%
Default

Ruger 10/22 Bren and FND BAR



Marlin 795 Barrett M99


Marlin 795 SCAR


Ruger 10/22 AK47


Ruger 10/22 M249 SAW
Reply With Quote
  #5  
Old 06-21-2012, 7:27 AM
defcon defcon is offline
.22LR Riffle
CGN Contributor
 
Join Date: Aug 2011
Location: Thousand Oaks/SFV
Posts: 2,879
iTrader: 26 / 100%
Default

Ruger 10/22 Vietnam M60


Ruger 10/22 Beretta ARX-160


Marlin 795 UMP and Ruger 10/22 G36



Last edited by defcon; 06-21-2012 at 7:34 AM..
Reply With Quote
  #6  
Old 06-21-2012, 7:54 AM
pennys dad's Avatar
pennys dad pennys dad is offline
CGSSA President
CGN Contributor - Lifetime
 
Join Date: Feb 2008
Location: CA
Posts: 5,663
iTrader: 181 / 100%
Default

Ruger 10/22 Auto Bolt release Mod using a file (you can use a dremel) video.

__________________
Warmest Regards

Jacob Rascon, (aka) Pennys Dad
President of CGSSA
CALGUNS Shooting Sports Association.
Jacob@CGSSA.Org

Something to be Thankful for: “To the world you may be one person but to one person you may be the world.”
Reply With Quote
  #7  
Old 09-07-2012, 8:42 PM
RalphAdopolis's Avatar
RalphAdopolis RalphAdopolis is offline
Member
 
Join Date: Aug 2009
Location: Riverside
Posts: 114
iTrader: 2 / 100%
Default

Defcon you my friend have some talent
Reply With Quote
  #8  
Old 09-07-2012, 8:42 PM
RalphAdopolis's Avatar
RalphAdopolis RalphAdopolis is offline
Member
 
Join Date: Aug 2009
Location: Riverside
Posts: 114
iTrader: 2 / 100%
Default

Defcon you my friend have some talent
Reply With Quote
  #9  
Old 09-12-2012, 9:31 PM
EdCo's Avatar
EdCo EdCo is offline
Senior Member
 
Join Date: Jul 2008
Location: Santa Ana
Posts: 843
iTrader: 8 / 100%
Default

I was tired of my Beretta Neos factory sights, so I thought I would give this a try. http://www.rimfirecentral.com/forums...d.php?t=442878 I bought a 1/16 and a 3/32 fiber optic rod from http://www.castbullet.com/forods.html I tried the 3/32 rod first but the rear sight covered it. I did buy extra front sights just in case.
__________________

Last edited by EdCo; 09-12-2012 at 9:59 PM..
Reply With Quote
  #10  
Old 10-09-2012, 9:34 PM
alpine600's Avatar
alpine600 alpine600 is offline
Junior Member
 
Join Date: Nov 2010
Posts: 45
iTrader: 5 / 100%
Default

got inspired by defcons mods

So I bought an L96 spring airsoft on CL. Tore it all the way down and went to town on it's guts with a dremel. Mated it with my Savage mark ii. Although it looks a little off with the stainless steel barrel. It's a work in progress...


Reply With Quote
  #11  
Old 10-10-2012, 5:35 AM
damngato's Avatar
damngato damngato is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Apr 2012
Location: Corona/Eastvale/Chino
Posts: 1,798
iTrader: 67 / 100%
Default

Quote:
Originally Posted by alpine600 View Post
got inspired by defcons mods

So I bought an L96 spring airsoft on CL. Tore it all the way down and went to town on it's guts with a dremel. Mated it with my Savage mark ii. Although it looks a little off with the stainless steel barrel. It's a work in progress...


Looks good man, one hell of a start!
Reply With Quote
  #12  
Old 10-10-2012, 7:36 AM
defcon defcon is offline
.22LR Riffle
CGN Contributor
 
Join Date: Aug 2011
Location: Thousand Oaks/SFV
Posts: 2,879
iTrader: 26 / 100%
Default

Quote:
Originally Posted by alpine600 View Post
got inspired by defcons mods

So I bought an L96 spring airsoft on CL. Tore it all the way down and went to town on it's guts with a dremel. Mated it with my
bravo man.

looks good.

so what parts did you have trouble with? how was the difficulty? you got any plans for another .22 conversion? it gets addicting. its a different kind of black rifle disease
Reply With Quote
  #13  
Old 10-10-2012, 11:08 AM
alpine600's Avatar
alpine600 alpine600 is offline
Junior Member
 
Join Date: Nov 2010
Posts: 45
iTrader: 5 / 100%
Default

Thanks defcon

Difficulty from 1-10: 5.5

The bothersome part was shaving away the internal walls so that the reciever and the mag well would fit. It was hard trying to figure out which one to shave or not to shave. I had to eyeball it, like you said, since there isn't much of a write up. I still have to cut a trough so the bolt can slide back and removed.

Also have to cut a hole for the mag well. Not sure if I want to leave it open or make it tidy and seal around it using epoxy. The ejection port lined up fairly well and clears the stock. I had to cut away some of the stock so that the safety selector can freely move.

Question. How did you support the rear part of the action? As of right now, the front part is stable using the screw from the airsoft. The rear part is just free floating.

Cheers!
Reply With Quote
  #14  
Old 10-10-2012, 11:31 AM
defcon defcon is offline
.22LR Riffle
CGN Contributor
 
Join Date: Aug 2011
Location: Thousand Oaks/SFV
Posts: 2,879
iTrader: 26 / 100%
Default

Quote:
Originally Posted by alpine600 View Post
Thanks defcon

Difficulty from 1-10: 5.5

The bothersome part was shaving away the internal walls so that the reciever and the mag well would fit. It was hard trying to figure out which one to shave or not to shave. I had to eyeball it, like you said, since there isn't much of a write up. I still have to cut a trough so the bolt can slide back and removed.

Also have to cut a hole for the mag well. Not sure if I want to leave it open or make it tidy and seal around it using epoxy. The ejection port lined up fairly well and clears the stock. I had to cut away some of the stock so that the safety selector can freely move.

Question. How did you support the rear part of the action? As of right now, the front part is stable using the screw from the airsoft. The rear part is just free floating.

Cheers!
the AICS stock that i have is from WELLS G96 gas. i havent touched it yet and was planning to put a tube fed Marlin XT-22

i did use my Savage MKII on a Blaser LRS1 and reused the 2 action screws. the one near the magazine i just used an aluminum strip and bolted it to the side of the body. the barrel is free floating right now but would like to bed it with aluminum and epoxy

i did have issues with the safety/fire selector. sometimes it would lock the trigger even though i have the selector set to fire. i think part of the internal stock was blocking it. but its fixed now.

you can weld or JB weld a block with a hole in it underneath the rear action and bolt it on to the AICS stock.

or maybe use an aluminum strip and JB weld it to the rear action and bolt it to the stock.

there's various ways you can do it. just think of creating brackets or a cube with a hole so you can mount it to something. kinda like using retaining pins. it has to go through something.
Reply With Quote
  #15  
Old 10-28-2012, 5:25 PM
elfstone's Avatar
elfstone elfstone is offline
Member
 
Join Date: Apr 2012
Location: Orange Curtain
Posts: 168
iTrader: 2 / 100%
Default

Trigger Job Filing:

http://youtu.be/PHyQBxRlbxU
__________________
Ask me about Project Appleseed.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 4:17 PM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2016, Calguns.net an Incorporated Company All Rights Reserved.