Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > INTERESTS AND ACTIVITIES > Gunsmithing & How To
Register FAQ Members List Calendar Mark Forums Read

Gunsmithing & How To Pro, Amateur & WECSOG and Tutorials, Guides & OLL Build Instructions

Reply
 
Thread Tools Display Modes
  #1  
Old 11-24-2010, 4:27 PM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default AR15 Assembler check list

I know there was a list here at one time. I can't find it, so I just made another one. Several people have asked for one, so I figured I would just type one out. This is basically from memory so PLEASE if you spot an error tell me so I can change it. Copy this, paste it and print it. Then use it while you are buying all the parts for your next build.

The major Assembly is on the left, parts inside that assembly (SUB-ASSEMBLIES) are under tabbed to the right. So you can check to see if the part you are buying has all the sub-assemblies needed with it.

ar15builderpartslist.pdf <-- needs check box for lower itself, but isnt that big a deal This is for printing
AR15-SchematicPDF.pdf <-- Very nice visual ref.

Plz see post #4 for a clean copy of this,
#16 for an updated PDF file
Post #20 for a PDF with computer check boxes
and Post #24 for Brownell's own order form, its 14 pages long, this single page makes a great cover page for that!!!!

Good luck.

UPPER RECEIVER ASSEMBLY Flat Top A3 or A4 type

---[ ]UPPER RECEIVER
-----------[ ]FORWARD ASSIST BUTTON ASSEMBLY OR DELRON PLUG
---------------------[ ]PAWL PIN
---------------------[ ]FORWARD ASSIST PAWL DETENT
---------------------[ ]FORWARD ASSIST PAWL DETENT SPRING
---------------------[ ]FORWARD ASSIST PAWL
---------------------[ ]FORWARD ASSIST SPRING
---------------------[ ]FORWARD ASSIST RETAINER PIN

-----------[ ]DOOR ASSEMBLY
---------------------[ ]DOOR
---------------------[ ]DOOR LATCH
---------------------[ ]SPRING
---------------------[ ]ROD WITH SNAP RING

---------------------------------------------------------------------------------------------

---[ ]BARREL WITH BARREL EXTENSION (CHAMBER)

----------[ ]BARREL NUT

----------[ ]MUZZLE DEVICE
--------------------[ ]CRUSH WASHER OR PEEL WASHER
--------------------[ ]SPACER
--------------------[ ]LOCK WASHER

----------[ ]GAS BLOCK / Front sight Base
--------------------[ ]GAS BLOCK PINS

----------[ ]GAS TUBE
--------------------[ ]GAS TUBE PIN

----------[ ]DELTA RING ASSEMBLY
--------------------[ ]WELD SPRING
--------------------[ ]SLIP RING

---------[ ]HAND GUARDS

---------------------------------------------------------------------------------------------

---[ ]BOLT CONTROL GROUP (BCG)

----------[ ]BOLT CARRIER

----------[ ]BOLT
-------------------[ ]EXTRACTOR
-------------------[ ]SPRING
-------------------[ ]SPACER
-------------------[ ]PIN
-------------------[ ]EJECTOR WITH SPRING AND PIN
-------------------[ ]GAS RINGS

----------[ ]FIRING PIN
-------------------[ ]FIRING PIN RETAINER

----------[ ]BOLT CAM

----------[ ]GAS KEY
-------------------[ ]GAS KEY BOLTS

---------------------------------------------------------------------------------------------

----------[ ]CHARGING HANDLE (CH)

-------------------[ ]CHARGING HANDLE LATCH
-------------------[ ]CHARGING HANDLE SPRING
-------------------[ ]CHARGING HANDLE SPRING PIN

---------------------------------------------------------------------------------------------


---[ ] LOWER RECEIVER ASSEMBLY
----------[ ] LOWER PARTS KIT (LPK)
------------------[ ]GRIP
------------------[ ]GRIP MACHINE SCREW
------------------[ ]GRIP LOCK WASHER
------------------[ ]SELECTOR LEVER
------------------[ ]SAFETY DETENT SPRING
------------------[ ]SAFETY DETENT
------------------[ ]TAKEDOWN PIN DETENT SPRING
------------------[ ]TAKEDOWN PIN DETENT
------------------[ ]TAKEDOWN PIN
------------------[ ]PIVOT PIN
------------------[ ]PIVOT PIN DETENT
------------------[ ]PIVOT PIN DETENT SPRING
------------------[ ]BOLT CATCH SPRING BUFFER
------------------[ ]BOLT CATCH PIN
------------------[ ]BOLT CATCH
------------------[ ]BOLT CATCH SPRING
------------------[ ]MAGAZINE CATCH
------------------[ ]MAGAZINE CATCH BUTTON
------------------[ ]MAGAZINE CATCH SPRING
------------------[ ]HAMMER SPRING
------------------[ ]TRIGGER SPRING
------------------[ ]HAMMER ASSEMBLY
------------------[ ]DISCONNECTOR
------------------[ ]DISCONNECTOR SPRING (FAT SIDE INSTALLS DOWN)
------------------[ ]TRIGGER ASSEMBLY
------------------[ ]TRIGGER GUARD
------------------[ ]BUFFER RETAINER
------------------[ ]BUFFER RETAINER SPRING

---------------------------------------------------------------------------------------------


M4 TYPE STOCK

---[ ]STOCK ASSEMBLY

----------[ ]STOCK
--------------------[ ]LOCKING LEVER
--------------------[ ]LOCKING LEVER SPRING
--------------------[ ]LEVER BOLT
--------------------[ ]LEVER BOLT WASHER

----------[ ]EXTENSION TUBE
----------[ ]BUFFER
----------[ ]BUFFER SPRING
----------[ ]CASTLE NUT
----------[ ]RECEIVER END-PLATE

A2 TYPE STOCK

---[ ]A2 FIXED STOCK ASSEMBLY

----------[ ]STOCK
----------------------[ ]STOCK END CAP (WITH OR WITHOUT TRAP DOOR)

----------[ ]EXTENSION TUBE
----------[ ]BUFFER
----------[ ]BUFFER SPRING
----------[ ]A2 SPACER (NOT NEEDED FOR A1 STOCK)
----------[ ]SCREWS (2)

TOOLS (UNCOMMON)

M4 CASTLE NUT STOCK WRENCH
BARREL WRENCH
CLAMSHELL UPPER BLOCK
LOWER MAGAZINE BLOCK
SNAP RING PLIERS Tip size: .047." Length: 6."

Last edited by dieselpower; 02-11-2012 at 12:26 PM.. Reason: ADDED HAND GUARDS
Reply With Quote
  #2  
Old 11-24-2010, 4:31 PM
Don29palms's Avatar
Don29palms Don29palms is offline
Senior Member
 
Join Date: Jun 2010
Posts: 1,830
iTrader: 0 / 0%
Default

Mine I put in a diferent thread was a little less detailed

Upper consists of
[ ]Complete upper reciever
[ ]Complete Bolt Carrier Group
[ ]Charging handle
[ ]Barrel
[ ]Gas block
[ ]Gas block tube and roll pin
[ ]Flash suppressor and crush washer
[ ]Free float handguard
or
[ ]Delta ring, spring and retainer
[ ]Handguard
[ ]Handguard cap

Lower consists of
[ ]Stripped lower
[ ]Lower parts kit
[ ]Buffer, buffer tube and buffer spring
[ ]Buttstock
[ ]Bullet Button (for rifles with evil features)

To assemble the upper you will need some special tools
Upper receiver action block
Armorers tool

For the lower if you don't have an armorers tool you will need a buttstock wrench if you have a collapsible buttstock.
__________________
Using gun control to stop crime is like trying to put out a fire with gasoline!
You don't have to get permission to exercise a RIGHT. If you have to get permission or can be told no by the government it is no longer a right. IT IS A PRIVILEGE!
AR-15 ASSEMBLY CHECK LIST FOR BUILDERS

Last edited by Don29palms; 12-27-2011 at 12:13 PM..
Reply With Quote
  #3  
Old 11-24-2010, 4:50 PM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default

Yeah I know there was a check list here with a spot you could actually "check" off. When I get back from dinner i will try to work on making it look better with better tabs.
Reply With Quote
  #4  
Old 11-24-2010, 5:22 PM
Don29palms's Avatar
Don29palms Don29palms is offline
Senior Member
 
Join Date: Jun 2010
Posts: 1,830
iTrader: 0 / 0%
Default

HERE YA GO. HOW'S THIS?

UPPER RECEIVER ASSEMBLY
[ ]UPPER RECEIVER
[ ]FORWARD ASSIST BUTTON ASSEMBLY OR DELRON PLUG
[ ]PAWL PIN
[ ]FORWARD ASSIST PAWL DETENT
[ ]FORWARD ASSIST PAWL DETENT SPRING
[ ]FORWARD ASSIST PAWL
[ ]FORWARD ASSIST SPRING
[ ]FORWARD ASSIST RETAINER PIN
[ ]DOOR ASSEMBLY
[ ]DOOR
[ ]DOOR LATCH
[ ]SPRING
[ ]ROD WITH SNAP RING
[ ]BARREL WITH BARREL EXTENSION (CHAMBER)
[ ]BARREL NUT
[ ]MUZZLE DEVICE
[ ]CRUSH WASHER OR PEEL WASHER
[ ]SPACER
[ ]LOCK WASHER
[ ]GAS BLOCK
[ ]GAS BLOCK PINS
[ ]GAS TUBE
[ ]GAS TUBE PIN
[ ]DELTA RING ASSEMBLY
[ ]WELD SPRING
[ ]SLIP RING

BOLT CONTROL GROUP (BCG)
[ ]BOLT CARRIER
[ ]BOLT
[ ]EXTRACTOR
[ ]SPRING
[ ]SPACER
[ ]PIN
[ ]EJECTOR WITH SPRING AND PIN
[ ]GAS RINGS
[ ]FIRING PIN
[ ]FIRING PIN RETAINER
[ ]BOLT CAM
[ ]GAS KEY
[ ]GAS KEY BOLTS WITH HIGH TEMP SEALANT
[ ]CHARGING HANDLE (CH)
[ ]CHARGING HANDLE LATCH
[ ]CHARGING HANDLE SPRING
[ ]CHARGING HANDLE SPRING PIN

LOWER RECEIVER ASSEMBLY
LOWER PARTS KIT (LPK)
[ ]GRIP
[ ]GRIP MACHINE SCREW
[ ]GRIP LOCK WASHER
[ ]SELECTOR LEVER
[ ]SAFETY DETENT SPRING
[ ]SAFETY DETENT
[ ]TAKEDOWN PIN DETENT SPRING
[ ]TAKEDOWN PIN DETENT
[ ]TAKEDOWN PIN
[ ]PIVOT PIN
[ ]PIVOT PIN DETENT
[ ]PIVOT PIN DETENT SPRING
[ ]BOLT CATCH PIN
[ ]BOLT CATCH
[ ]BOLT CATCH SPRING
[ ]MAGAZINE CATCH
[ ]MAGAZINE CATCH BUTTON
[ ]MAGAZINE CATCH SPRING
[ ]HAMMER SPRING
[ ]TRIGGER SPRING
[ ]HAMMER ASSEMBLY
[ ]DISCONNECTOR
[ ]DISCONNECTOR SPRING (FAT SIDE INSTALLS DOWN)
[ ]TRIGGER ASSEMBLY
[ ]TRIGGER GUARD

M4 TYPE STOCK

STOCK ASSEMBLY
[ ]STOCK
[ ]LOCKING LEVER
[ ]LOCKING LEVER SPRING
[ ]LEVER BOLT
[ ]LEVER BOLT WASHER
[ ]EXTENSION TUBE
[ ]BUFFER
[ ]BUFFER SPRING
[ ]CASTLE NUT
[ ]RECEIVER END-PLATE

A2 TYPE STOCK

A2 FIXED STOCK ASSEMBLY
[ ]STOCK
[ ]STOCK END CAP (WITH OR WITHOUT TRAP DOOR)
[ ]EXTENSION TUBE
[ ]BUFFER
[ ]SPRING
[ ]A2 SPACER (NOT NEEDED FOR A1 STOCK)
[ ]SCREWS (2)

TOOLS (UNCOMMON)
M4 CASTLE NUT STOCK WRENCH
BARREL WRENCH
CLAMSHELL UPPER BLOCK
LOWER MAGAZINE BLOCK
SNAP RING Tip size: .047." Length: 6."
__________________
Using gun control to stop crime is like trying to put out a fire with gasoline!
You don't have to get permission to exercise a RIGHT. If you have to get permission or can be told no by the government it is no longer a right. IT IS A PRIVILEGE!
AR-15 ASSEMBLY CHECK LIST FOR BUILDERS

Last edited by Don29palms; 12-27-2011 at 12:15 PM..
Reply With Quote
  #5  
Old 11-24-2010, 5:40 PM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default

Yeah, thats what I am working on, also need to indent the subassemblies under the higher assembly. I am working on that now
Reply With Quote
  #6  
Old 11-24-2010, 6:15 PM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default

THINK THATS DONE.

Thanks Don

Last edited by dieselpower; 11-24-2010 at 6:59 PM..
Reply With Quote
  #7  
Old 11-25-2010, 6:31 PM
DeanW66's Avatar
DeanW66 DeanW66 is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Oct 2008
Location: Thanks to Casual Shooter, this really is kinda fun (was Los Gatos Mountains) ;-)
Posts: 5,075
iTrader: 17 / 100%
Default

I wouldn't mine converting to PDF once complete. And if not too large then put it in my attachments section.
Reply With Quote
  #8  
Old 11-25-2010, 6:59 PM
21SF's Avatar
21SF 21SF is offline
Veteran Member
 
Join Date: Oct 2010
Location: Bay Area
Posts: 3,529
iTrader: 8 / 100%
Default

Thanks for the hard work guys! Should keep some unnecessary post at bay.
Reply With Quote
  #9  
Old 11-25-2010, 7:18 PM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default

Quote:
Originally Posted by DeanW66 View Post
I wouldn't mine converting to PDF once complete. And if not too large then put it in my attachments section.
Well Dean, I think between my list and Dons adding [ ] check boxes to the whole list, there is no reason to use my word doc. The only thing different is no ----- and the [ ] are circles.

still if anyone spots an error or missing assembly or sub-assemly tell me. I will edit the first post.
Reply With Quote
  #10  
Old 11-25-2010, 8:19 PM
Don29palms's Avatar
Don29palms Don29palms is offline
Senior Member
 
Join Date: Jun 2010
Posts: 1,830
iTrader: 0 / 0%
Default

Quote:
Originally Posted by dieselpower View Post
Well Dean, I think between my list and Dons adding [ ] check boxes to the whole list, there is no reason to use my word doc. The only thing different is no ----- and the [ ] are circles.

still if anyone spots an error or missing assembly or sub-assemly tell me. I will edit the first post.
TEAM WORK Brother!
__________________
Using gun control to stop crime is like trying to put out a fire with gasoline!
You don't have to get permission to exercise a RIGHT. If you have to get permission or can be told no by the government it is no longer a right. IT IS A PRIVILEGE!
AR-15 ASSEMBLY CHECK LIST FOR BUILDERS
Reply With Quote
  #11  
Old 11-25-2010, 8:58 PM
richie3888's Avatar
richie3888 richie3888 is offline
Senior Member
 
Join Date: Apr 2010
Location: San Pablo, CA
Posts: 803
iTrader: 30 / 100%
Default

Sticky this
Reply With Quote
  #12  
Old 12-12-2010, 4:09 PM
morfeeis's Avatar
morfeeis morfeeis is offline
Calguns Addict
 
Join Date: Apr 2010
Location: Freeman in Mesa AZ
Posts: 7,597
iTrader: 30 / 100%
Default

Thanks for the hard work
__________________
ΜΟΛΩΝ ΛΑΒΕ
Quote:
Originally Posted by Ayn Rand View Post
You seek escape from pain. We seek the achievement of happiness. You exist for the sake of avoiding punishment. We exist for the sake of earning rewards. Threats will not make us function; fear is not our incentive. It is not death we wish to avoid, but life that we wish to live.
Reply With Quote
  #13  
Old 12-22-2010, 6:32 AM
DeanW66's Avatar
DeanW66 DeanW66 is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Oct 2008
Location: Thanks to Casual Shooter, this really is kinda fun (was Los Gatos Mountains) ;-)
Posts: 5,075
iTrader: 17 / 100%
Default Finally got list into PDF

Sooo, how does this work for PDF version? I made it a single sheet, mult-column layout. Too bad the [IMG] tags don't work on PDF.

Last edited by DeanW66; 12-28-2010 at 8:10 AM..
Reply With Quote
  #14  
Old 12-22-2010, 6:51 AM
-hanko's Avatar
-hanko -hanko is offline
Calguns Addict
 
Join Date: Jul 2002
Location: Bay Area & SW Idaho
Posts: 9,160
iTrader: 5 / 100%
Default

Quote:
Originally Posted by 21SF View Post
Thanks for the hard work guys! Should keep some unnecessary post at bay.
It's a great effort.

Otoh, the same posts will continue as few here know about internet search engines...9 v. .45, ar v. ak, 870 v. 500, etc.

Good holidays.

-hanko
__________________
"Tactical" is like boobs...you can sell anything with it....arf

I never once felt out of place or that people were intolerant...but then again, I didn't ask any dumbass questions ...saxman

“Heaven goes by favor. If it went by merit, you would stay out and your dog would go in.”
Mark Twain
Reply With Quote
  #15  
Old 12-22-2010, 7:09 AM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default

Quote:
Originally Posted by DeanW66 View Post
Sooo, how does this work for PDF version? I made it a single sheet, mult-column layout. Too bad the [IMG] tags don't work on PDF.
Just noticed no check off for the OLL itself...

I'll fix my first post if you can fix the PDF that would be great. I'll add the pdf when you have fixed it. If its going to cause problems on the 1 page thing dont bother. I feel the 1 page aspect is a big +
Also at the top add AR15A3 (Flat Top) I forgot to add the A2 BUIS parts to the upper and dont feel it needs to be there..

If you do tell me. Its nothing to add them but it does increase the list size.

Last edited by dieselpower; 12-22-2010 at 7:15 AM..
Reply With Quote
  #16  
Old 12-28-2010, 8:11 AM
DeanW66's Avatar
DeanW66 DeanW66 is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Oct 2008
Location: Thanks to Casual Shooter, this really is kinda fun (was Los Gatos Mountains) ;-)
Posts: 5,075
iTrader: 17 / 100%
Default Updated PDF

Ok, the PDF is updated; new title includes A3 and A4. Added checkbox for stripped lower.
Attached Files
File Type: pdf ar15builderpartslist.pdf (145.8 KB, 321 views)
Reply With Quote
  #17  
Old 03-15-2011, 4:49 PM
ridiqls's Avatar
ridiqls ridiqls is offline
Member
 
Join Date: Mar 2011
Posts: 119
iTrader: 2 / 100%
Default

This helps a noobie like me immensely. It's no longer a big black box, but a blueprint layout which helps me visualize. Thumbs up
Reply With Quote
  #18  
Old 03-15-2011, 5:02 PM
RRichie09's Avatar
RRichie09 RRichie09 is offline
Veteran Member
 
Join Date: Apr 2010
Location: Diamond Bar, CA
Posts: 2,600
iTrader: 34 / 100%
Default

Cool if I link to this thread when I make my thread?
__________________

-Rich
Reply With Quote
  #19  
Old 04-08-2011, 8:33 PM
thebriarman's Avatar
thebriarman thebriarman is offline
Junior Member
 
Join Date: Jun 2010
Location: Colorado Springs, CO
Posts: 94
iTrader: 45 / 100%
Default

Thanks DeanW66, Dieselpower, and others who contributed to this build list. I'm just starting to research the AR-15 platform and now I've got a starting point. Way too many choices! I friend of mine has an older converted M16 he thinking about selling that I'm going to look into, also.
__________________
Join the NRA![SIGPIC]
James 1:22
Reply With Quote
  #20  
Old 04-16-2011, 8:49 PM
bigevil's Avatar
bigevil bigevil is offline
Member
 
Join Date: Mar 2011
Location: Los Angeles
Posts: 197
iTrader: 34 / 100%
Default

I felt it pertinent to carry my weight as a newcomer here so I made your PDF computer optimized(most PDF readers will now enable checking off your boxes within it). slightly tedious but worth it for the tech generation of my peers who will have our iPads and other toys with us sometimes while cleaning/assembling/disassembling. Its also girlfriend/wife friendly if they want to help you keep track of where you're at.

[TIP; open the document and "save as" something new to insure that your checks save where they're at]

Alt Link to most up to date file
Attached Files
File Type: pdf ar15builderpartslist-wChecks 4-16-11pm.pdf (242.8 KB, 212 views)

Last edited by bigevil; 04-16-2011 at 10:27 PM..
Reply With Quote
  #21  
Old 04-16-2011, 8:54 PM
rattlesnake_nm rattlesnake_nm is offline
Banned
 
Join Date: Jan 2011
Location: Corpus Christi, Texas
Posts: 688
iTrader: 0 / 0%
Default

If possible add a trigger pin slave pin. It imo is one of the best tools. I had a complete upper thurs evening seriously in 15 or 20 minutes. The slave pin made it go so much quicker. I got my slave pins from buying gisselle triggers.
Reply With Quote
  #22  
Old 04-16-2011, 10:17 PM
well206 well206 is offline
Member
 
Join Date: Jan 2011
Posts: 164
iTrader: 9 / 100%
Default

Quote:
Originally Posted by bigevil View Post
I felt it pertinent to carry my weight as a newcomer here so I made your PDF computer optimized(most PDF readers will now enable checking off your boxes within it). slightly tedious but worth it for the tech generation of my peers who will have our iPads and other toys with us sometimes while cleaning/assembling/disassembling. Its also girlfriend/wife friendly if they want to help you keep track of where you're at.
thanks for the PDF! right now, deciding whether or not i want to build or just buy already assembled... hmm...

just a suggestion for the PDF, could you make it so that the checking off of the parts can be saved? tried it earlier with Adobe Reader, said I could check the boxes but could not save. thanks again!!!
Reply With Quote
  #23  
Old 04-16-2011, 10:28 PM
bigevil's Avatar
bigevil bigevil is offline
Member
 
Join Date: Mar 2011
Location: Los Angeles
Posts: 197
iTrader: 34 / 100%
Default

Try to "save as" and enter a new name or ammend it the first time you open it, this should allow all changes to save if you close it. Let me know. (p.s fixed a multiple checking error, new file up).
Reply With Quote
  #24  
Old 04-16-2011, 10:34 PM
clcolin81's Avatar
clcolin81 clcolin81 is online now
Member
 
Join Date: Apr 2009
Location: Suisun City, Solano County
Posts: 362
iTrader: 3 / 100%
Default

maybe this is too little to late, but I found this from bronwell's very useful.

http://www.brownells.com/UserDocs/Mi...s/ARCLform.pdf
Reply With Quote
  #25  
Old 04-16-2011, 10:36 PM
bigevil's Avatar
bigevil bigevil is offline
Member
 
Join Date: Mar 2011
Location: Los Angeles
Posts: 197
iTrader: 34 / 100%
Default

awwww shucckks i don't wanna add checkboxes to that. doesn't feel as "calguns hand forged" as the ghetto fab pdf we're kickin around!

Last edited by bigevil; 04-16-2011 at 10:46 PM..
Reply With Quote
  #26  
Old 04-17-2011, 8:35 AM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default

awesome guys. This was meant as a down and dirty copy/paste/print sheet for any builder. Its past that with the added stuff you all have done and I am sure it will be much appreciated by anyone.

Thanx a bunch for the check boxes, I know that had to be a PITA...lol

So it can be used two ways, one on the computer desk top, the other as a printed checklist to keep with your build.

That Brownell's is awesome too, but its 14 pages. But its also nice to have space to write prices and junk..whatever all things that help you get the job done are cool.

save this, link this, share this. Its a quick down a dirty list everyone should have.
Reply With Quote
  #27  
Old 04-17-2011, 8:39 AM
bigevil's Avatar
bigevil bigevil is offline
Member
 
Join Date: Mar 2011
Location: Los Angeles
Posts: 197
iTrader: 34 / 100%
Default

Diesel anytime you add stuff let me know and I'll update the checkbox version (or you can let me know what you'd like to add)
Reply With Quote
  #28  
Old 04-17-2011, 8:43 AM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default

No problem. I think the thread is a great show of community spirit so I updated the OP to cue readers to look at the other posts in the thread.

It would be great if other people added down-loadable files to this thread then I will update my OP drawing attention to that post #.

I am going to add an expanded exploded view of the AR15 shortly
Reply With Quote
  #29  
Old 04-17-2011, 8:45 AM
bigevil's Avatar
bigevil bigevil is offline
Member
 
Join Date: Mar 2011
Location: Los Angeles
Posts: 197
iTrader: 34 / 100%
Default

I have a good amount of hosting space for documents and files with easy access to single downloadable links so if you guys need a place to host the files let me know, I'll upload em and post the links here for usage site wide.
Reply With Quote
  #30  
Old 04-17-2011, 8:54 AM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default

this check list is ok, but the exploded view and my two links to the US Military manuals on the rifle are mandatory for any owner (IMHO that is LOL)

Please remember not to charge people for us military information...they already paid for it with their tax dollars... I hate it when on-line companies charge for government generated information...its public property. /rant

The Two TMs are so needed. Its awesome to print the whole document, then place it in a binder and have as a reference on your rifle. Its like a gold mine of information on your rifle...I can not stress enough that people need to look over the two TMs in my links.

One is basic, the other is a bit more indepth...both are GOLDEN!
Reply With Quote
  #31  
Old 06-02-2011, 12:43 AM
dlamib's Avatar
dlamib dlamib is offline
Junior Member
 
Join Date: May 2011
Location: Tracy, CA
Posts: 13
iTrader: 0 / 0%
Default Thanks for the info

Quote:
Originally Posted by dieselpower View Post
this check list is ok, but the exploded view and my two links to the US Military manuals on the rifle are mandatory for any owner (IMHO that is LOL)

Please remember not to charge people for us military information...they already paid for it with their tax dollars... I hate it when on-line companies charge for government generated information...its public property. /rant

The Two TMs are so needed. Its awesome to print the whole document, then place it in a binder and have as a reference on your rifle. Its like a gold mine of information on your rifle...I can not stress enough that people need to look over the two TMs in my links.

One is basic, the other is a bit more indepth...both are GOLDEN!
Wanted to say thanks for the info. The TM's are golden. Do you have a 23P I could get?
Reply With Quote
  #32  
Old 06-02-2011, 8:28 AM
dieselpower's Avatar
dieselpower dieselpower is offline
I need a LIFE!!
 
Join Date: Jan 2009
Location: Ventura
Posts: 10,386
iTrader: 11 / 100%
Default

Quote:
Originally Posted by dlamib View Post
Wanted to say thanks for the info. The TM's are golden. Do you have a 23P I could get?
I have it in PDF, ill see if I can host it and replace my zeroing link. I will try to send it too you also.

I think you mean the FM-23-9, marksmanship manual

My last link is the TM9-1005-319-23&p I just left off the &P.

Last edited by dieselpower; 06-02-2011 at 8:33 AM..
Reply With Quote
  #33  
Old 06-20-2011, 3:19 PM
Javi's Avatar
Javi Javi is offline
Veteran Member
 
Join Date: Dec 2010
Location: Chino, CA
Posts: 4,545
iTrader: 23 / 100%
Default

This should be sticked
__________________
Quote:
Originally Posted by d4v0s View Post
My girlfriend and i used froglube last night in a pinch and it works great.
R.I.P. Thomas C.
Reply With Quote
  #34  
Old 08-29-2011, 12:02 PM
Quinc's Avatar
Quinc Quinc is offline
Veteran Member
 
Join Date: Jan 2010
Location: Butte County
Posts: 2,978
iTrader: 27 / 100%
Default

Great thread thanks!
__________________
Shop Amazon and contribute to CGF!
click this link before going to amazon.com
http://www.shop42a.com


www.appleseedinfo.org

"Everyone has a plan, till they get punched in the face." -Mike Tyson
Reply With Quote
  #35  
Old 11-18-2011, 8:02 AM
target1 target1 is offline
Junior Member
 
Join Date: Nov 2011
Posts: 6
iTrader: 0 / 0%
Default

Thanks for breaking it down.
Reply With Quote
  #36  
Old 11-21-2011, 9:37 AM
john.t.singh's Avatar
john.t.singh john.t.singh is offline
Senior Member
 
Join Date: Nov 2010
Location: San Diego
Posts: 1,448
iTrader: 37 / 100%
Default

tag for later
__________________
We must learn to live together as brothers or we will perish together as fools.

Reply With Quote
  #37  
Old 02-11-2012, 12:19 PM
BCWhite13 BCWhite13 is offline
Junior Member
 
Join Date: Feb 2012
Posts: 1
iTrader: 0 / 0%
Default

Nice list, helps to not miss items. Thanks.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 5:53 PM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2016, Calguns.net an Incorporated Company All Rights Reserved.