![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
Rimfire Firearms .22, .17 and other Rimfire Handguns and Rifles |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
Got a standard 10/22 carbine, and a cheap tasco scope and even cheaper weaver rings to mount on it. The scope rings won't tighten on the included Ruger scope base. there's still some side to side and front to rear play, no matter how much I tighten the rings down.
Are my rings junk, or might the base be out of spec? Thanks.
__________________
"Any unarmed people are slaves, or are subject to slavery at any given moment." - Dr. Huey P. Newton |
#2
|
||||
|
||||
![]()
Take a good look at the rings where it meets the rail... Some scope mounts do not mate up with the rail since the rail's 'indentations' for the cross bar on the rings are not deep enough.
I had this issue with some cheap scope rings, then got some specific ones from My LGS and now I'm GTG. Sent from my iPhone OneGtalon
__________________
Laws and common sense is all up to interpretation to us humans... and guess what? Humans suck. Onegtalon... toooooo many hobbies man !... HDF, CGN/CGF member ![]() |
#4
|
|||
|
|||
![]() Quote:
Easy fix! Just pick up an inexpensive set of rimfire/air rifle type rings ...available everywhere! Hope this helps! Y |
#5
|
||||
|
||||
![]()
yea tip off and weaver are not the same buy one of these they are great
http://www.ebay.com/itm/UTG-Ruger-10...-/221182838534 |
#6
|
||||
|
||||
![]()
My .22 originally had a dovetail I mounted to the receiver. Scope Rings mounted to the dovetail etc. Basically 5 pieces, mine was junk including the tasco it came with. Loosened all the time. I bought a DNZ medium one piece mount & have been happy & maintenance free ever since!
__________________
Yes I took the pic, no I didn't go swimming! |
#7
|
||||
|
||||
![]()
Ruger 10/22 is a fine rifle ,I have 4 , I has a Power Custom scope base that I bought from Midway . It has a set of 1.000 rings on a full size scope. The 2 other has Weaver brand scope bases from gun stores , Bass pro had one. Weave 1 inch rings . Use lock tight. The last has Williams Peep sight with a .560 height orange bead sight. The weaver type rings come in differant heights. With this type of mount your scope wont move. I do not have any 30mm rings just the 1 inch type.
|
#8
|
||||
|
||||
![]()
Ditch the factory base. Don't know why they (Ruger) still makes/provides that junk.
|
#9
|
|||
|
|||
![]()
Here's the original Ruger, the upgraded OEM Ruger which accepts both .22 rings and Weaver style and the one I use on all my 1022's which is the previously referenced Power Custom. You won't regret buying the Power Custom!
![]() The rings are mounted through one of many slots for a positive fit. |
#10
|
||||
|
||||
![]()
Thanks guys, I ordered a cheap set of Leupold rifleman rings and they mount up to the Ruger base rock solid.
__________________
"Any unarmed people are slaves, or are subject to slavery at any given moment." - Dr. Huey P. Newton |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
![]() |
![]() |