Quentin Defense AR15+AR10 80% group buy. CLOSED

[ARGunner]

Can you take me off the list for order, I am in group #3 about 3/4 of the way to the bottom. I recently picked up some other billet lowers and completed them the other day. Thanks for your hard work in putting all this together and even though I'm not purchasing I appreciate your hard work in organizing this.

[Zymergist]

PM Sent RE ARGunner's drop.

[blackhawke88]

Originally Posted by Cary1911

Can I modify my order a little bit, I'm in group #2. I would like to change to:
2x 15A & 1x 10A. Thank you!

Originally Posted by blackhawke88

since he had 4A and now going to 2A, can I take one of his anodized ar15s? Thanks!

Originally Posted by motox917

I'll take the other anodized lower, if that's possible.

were the above changes able to be made? Thanks!

[AIMSMALL]

Originally Posted by blackhawke88

were the above changes able to be made? Thanks!

I made the changes for Cary and blackhawke but I'm not going to add motox's request to the group buy, it wouldn't be fair to everyone else who has been trying to get in on it after it closed.

[MAGTIKI]

Thank God they moved the thread! I couldn't hold my breath anymore!!!!

I'm so excited I can't contain myself!!!!

[SP1200]

Yea I'm stoked to be getting 15 lowers! Man...there should be a free-bee for the guy who paid the most. lol.

[Cheung415]

If its possible I'm in the group buy #2 "Cheung415 1A1A" could I take one of the cancelled AR15 anodized and add that onto my order? Thanks

[AJ Machine]

I would like 3 ar10 not anodized.
(3x 10W)

Please let me know what group I am in, the sooner the better, and I can pay ASAP too.
Thanks

[foxtrotuniformlima]

Originally Posted by AJ Machine

I would like 3 ar10 not anodized.
(3x 10W)

Please let me know what group I am in, the sooner the better, and I can pay ASAP too.
Thanks

The title of the thread is:

Quentin Defense AR15+AR10 80% group buy January 2013 CLOSED

[Rgstoffel]

sorry if I am an idiot, but is the buy closed for all groups or just the 1st? I would like to place an order for group two or three but I don't want to look like an A-hole. Wouldn't be the first time I looked like "said" hole.

[jurrd87]

Originally Posted by Rgstoffel

sorry if I am an idiot, but is the buy closed for all groups or just the 1st? I would like to place an order for group two or three but I don't want to look like an A-hole. Wouldn't be the first time I looked like "said" hole.

Closed to all

Sent from my DROID BIONIC using Tapatalk 2

[wingnut232]

Tagged

[AJ Machine]

I would like 3 ar10 not anodized.
(3x 10W)
IF I can fit in group #2 I can pay ASAP.
Please let me know what group I am in, the sooner the better, and I can pay ASAP too.
Thanks

[Dark]

Question for the group: Does anyone know if these lowers will fit in a Tactical Machining jig? (Most interested to know about the AR15, but also curious about the AR10). Thanks in advance.

[machinegun]

Originally Posted by Dark

Question for the group: Does anyone know if these lowers will fit in a Tactical Machining jig? (Most interested to know about the AR15, but also curious about the AR10). Thanks in advance.

I believe it does not due to differences around the magazine well. The jig that compliments this particular 80% is taller and longer. I'm not too sure on the tactical machining fitment because I do not have it in front of me; but, that is, what I have read from the first page.

from page one:

Originally Posted by AIMSMALL

AR15 80% lower Jigs
These are the best jigs produced to date they fit both billet and forged AR15 80%'s and come with the 3 top guide plates, 4 locating pins and detailed instructions. These jigs have the steel drill guide inserts and are taller then all the other jigs out there for the trigger guard on billet lowers. Retail is $140 group buy price is $110 shipped to you. These will ship with your order when your groups order comes in.

[Non-commiforniaist]

I need to modify my order. I want to drop one of the AR10's and add 1 AR10 jig and 1 AR-15 jig

I' in group #2

[AIMSMALL]

Side plates are coming along, due to some very cool changes to the top plate design we still need to add another hole for a locating pin on the top of each plate (pics will be posted once we finish the new revised top plates). I'm hoping to send everything off to anodizing by Friday. All the plates are going to be FDE tan and the heat treated drill bushings are at the shope getting black oxided now. I'm really looking forward to getting the finished product, they are going to be top quality jigs!

[Cannon-Arms]

I see mine, right there.

[jqpham]

Hey aimsmall. Are there any differences from the current jig you have pictured to the previous ones that you have offered? I was in nov/dec group buy and purchased an ar15 jig.

[AIMSMALL]

Originally Posted by Non-commiforniaist

I need to modify my order. I want to drop one of the AR10's and add 1 AR10 jig and 1 AR-15 jig

I' in group #2

Your order has been updated.

Originally Posted by jqpham

Hey aimsmall. Are there any differences from the current jig you have pictured to the previous ones that you have offered? I was in nov/dec group buy and purchased an ar15 jig.

The difference is that the ones pictured are the first and only jigs out there for the QD10 (they were designed to also fit TM10's). The 15 jigs are still the same as the previous group buy and are great jigs.

[cpatbay]

Hi, could you cancel my order for 2A1J in Group 3 and issue a refund? Thanks.

[AJ Machine]

Aimsmall,
I see the post right before mine that he is in group #2 and wants to cancel his order for the AR10, can I just be put in his place? I can forward the MO for the $ the same day you let me know if I can get his cancelled order.
And there are a few other "guys" that cancelled as well. I would gladly take their place (up to 3 AR10's with or without anodizing) Please let me know.
I hope it would be easier to take my $ instead of cancelling the order with KTO.
Don't mean to bug, but I would really like to get a few of these...Thanks
Alan

[peacedivision]

Hey Aimsmall, I'm in group 2 and if possible would like to switch from an Anodized to Raw part.

Keep the $5 difference

If its too late to change no big deal, thanks!

[bigdawg86]

If anyone is willing I would LOVE to trade my stripped anodized upper for a raw ar15 upper... The upper I have is not QD.

Sent from my DROID RAZR using Tapatalk 2

[AIMSMALL]

Originally Posted by peacedivision

Hey Aimsmall, I'm in group 2 and if possible would like to switch from an Anodized to Raw part.

Keep the $5 difference

If its too late to change no big deal, thanks!

Done

[lamduh]

Originally Posted by AJ Machine

Aimsmall,
I see the post right before mine that he is in group #2 and wants to cancel his order for the AR10, can I just be put in his place? I can forward the MO for the $ the same day you let me know if I can get his cancelled order.
And there are a few other "guys" that cancelled as well. I would gladly take their place (up to 3 AR10's with or without anodizing) Please let me know.
I hope it would be easier to take my $ instead of cancelling the order with KTO.
Don't mean to bug, but I would really like to get a few of these...Thanks
Alan

i think you mean QD not KTO....


Sent from my iPhone using Tapatalk 2

[AIMSMALL]

Originally Posted by AJ Machine

Aimsmall,
I see the post right before mine that he is in group #2 and wants to cancel his order for the AR10, can I just be put in his place? I can forward the MO for the $ the same day you let me know if I can get his cancelled order.
And there are a few other "guys" that cancelled as well. I would gladly take their place (up to 3 AR10's with or without anodizing) Please let me know.
I hope it would be easier to take my $ instead of cancelling the order with KTO.
Don't mean to bug, but I would really like to get a few of these...Thanks
Alan

I'm going to just cancel his order. I will fill group 3 orders with any extras that we have from cancellations or flakes in the order of who paid first. After group 2 and early paid group 3 orders ship I'll have a good idea about what we can add to group 3's order, at that point if I open up the ordering again it will be based on posted order requests after I re-open it.

[machinegun]

can the AR15 jigs be used on other lowers besides QD such as Tactical Machining??

[AIMSMALL]

Originally Posted by machinegun

can the AR15 jigs be used on other lowers besides QD such as Tactical Machining??

Yes

[skysplash]

Hi Aimsmall
I'm in group 2 if its not too late I would like to change my order.

from 3 15A ,315W, 1 15jig 2 10A , 2 10W ,1 10jig

To 5 15A ,1 15W, 1 15jig 3 10A , 1 10W ,1 10jig
Let me know if this is OK so I can send you the $$$$$

THANKS

[choprzrul]

Is Group 1 finalized? If so, how does production reconcile against Group 1 orders?

In otherwords, did enough Group 1 15A buyers back out to bump me up the delivery list???

mesocurious

.

[mchava]

Aimsmall just wondering if you have any updates on when you might see the orders for group one come in?

[AIMSMALL]

Originally Posted by choprzrul

Is Group 1 finalized? If so, how does production reconcile against Group 1 orders?

In otherwords, did enough Group 1 15A buyers back out to bump me up the delivery list???

mesocurious

.

Yeah, you should be good but untill the order shows up and I have everyones stuff accounted for I'm not making any promises.

Originally Posted by mchava

Aimsmall just wondering if you have any updates on when you might see the orders for group one come in?

Yes, by the end of this month!

[mchava]

Thanks can't wait to get these done soon

[Ninety]

I'm guessing that we can ADD the anodizing after the fact..

how much advanced notice would you need ? I'm in group 2 and order 4 raw.. I may want to anodize a couple of them .. haven't decided yet.

[AIMSMALL]

Originally Posted by Ninety

I'm guessing that we can ADD the anodizing after the fact..

how much advanced notice would you need ? I'm in group 2 and order 4 raw.. I may want to anodize a couple of them .. haven't decided yet.

You need to order what you want, can't add anodizing if you order white because QD is doing the anodizing before shipping. You can have them anodized on your own after you machine them if you'd prefer...

[AIMSMALL]

Reminder: Group 2 payments are due by April 5th so please start getting your payments in, it takes a lot of time to process the payments and when I get all of them at one time it's a huge chore. Late payments are another PITA, I'll leave that to your imagination but yeah, PITA.

QD10 Jig update:
New top plates are running now, should have them all done by tomorrow. What we did was added 2 small steps in the top plates so they will center themselves automatically so your FCG pocket will be centered, this was needed because the TM and QD .308 80%'s are different widths. Another change is that we added 2 holes in the top plates and a hole on top of each side plate, these will be used to setup the location of the pocket from front to back based on which 80% you are using by putting a pin in one of the 2 holes on the top plate which can't be mixed up as the holes are placed so you will only be able to put the pin in the locating hole for the lower that is in the jig. I hope I haven't completely confused everyone already. Lastly, we ditched the top plate that had all the drill guide holes and went with a top plate to do just the deeper part of the pocket instead ( I had visions of people just cutting the entire pocket to the same depth and ruining their 80's). These changes basically added a week to my previous eta, at this point I expect to get everything to anodizing on Monday and back before the end of next week. The drill bushings are back from heat treat and black oxide too, they look great. Here's a few pics.

[EFUNK79]

1 ar15 anodozies 80%

[Rorge Retson]

Gents - I have partially updated the anodizing thread with the potential for colors other than black, if there is enough interest.

Here is a link to the post in the Anodizing Group Buy Thread with the possible colors: LINKY

I will update the original post soon with the latest info on all anodizing - logistics, prices (still the same), etc.

Just to be clear, there will be anodizing IMMEDIATELY AFTER EACH BUILD PARTY for Groups 1, 2, and 3. As soon as your pieces are machined, I will deliver them to the anodizer for treatment. They will likely be done in less than a week.

If you have any questions, please send me a PM, or reply in the Anodizing Group Buy Thread.

[machinegun]

What size are the takedown pins on the QD10? POF style or DPMS?

edit: Thanks for the reply Aimsmall!