Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > FIREARMS DISCUSSIONS > Rimfire Firearms
Register FAQ Members List Calendar Mark Forums Read

Rimfire Firearms .22, .17 and other Rimfire Handguns and Rifles

Reply
 
Thread Tools Display Modes
  #1  
Old 01-19-2013, 7:24 PM
Nickgt40's Avatar
Nickgt40 Nickgt40 is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: May 2011
Location: Elk Grove
Posts: 504
iTrader: 6 / 100%
Default All Kinds of 22/45 Issues.

Very long story short, my 22/45 went from not being able to assemble to now not being able to disassemble.

Starting with the current state, the gun won't come apart. I can pull the rear lever down to release the bolt pin assembly from the frame but it does not swing up so that I can pull it out.

This is as far as it goes:




Obviously this is how it's supposed to swing out:




Also, the bolt doesn't go all the way back, again, as far as it goes:





However, if I try to pull the bolt back with the bolt pin lever disengaged (1st picture) I can get the bolt to go all the way back and lock open, but this still doesn't help with disassembly.

Any and all advice is appreciated guys, I'm getting a bit flustered.
Reply With Quote
  #2  
Old 01-19-2013, 7:51 PM
hylander's Avatar
hylander hylander is offline
Veteran Member
 
Join Date: Oct 2005
Location: Lincoln
Posts: 2,676
iTrader: 122 / 100%
Default

Turn it upside down and try again
__________________
Failure is not an Option
Reply With Quote
  #3  
Old 01-19-2013, 7:55 PM
ejs ejs is offline
Junior Member
 
Join Date: Aug 2009
Location: San Mateo
Posts: 91
iTrader: 6 / 100%
Default

You didn't pull the trigger before you started to disassemble it. Put the lever carefully back in, you may need to fiddle with it to get the small arm at the back of the hammer to fall back into place. Then pull the trigger and it should come out normally.
Reply With Quote
  #4  
Old 01-19-2013, 8:03 PM
AK all day's Avatar
AK all day AK all day is offline
Veteran Member
 
Join Date: Mar 2012
Location: Highland CA
Posts: 2,783
iTrader: 22 / 100%
Default

This is the biggest pain in the ***, I'll tell you that. Look up a tutorial video on YouTube and try and follow it exactly to get out of your situation. I was stuck like that 2 times for about an hour. Don't use exesive force at any time.
Reply With Quote
  #5  
Old 01-19-2013, 9:21 PM
Nickgt40's Avatar
Nickgt40 Nickgt40 is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: May 2011
Location: Elk Grove
Posts: 504
iTrader: 6 / 100%
Default

Update: These two videos made the difference.

http://www.youtube.com/watch?v=xoFYwbHjOEg

http://www.youtube.com/watch?v=vh5eylgiNcI

Thanks for the help guys.
Reply With Quote
  #6  
Old 01-19-2013, 11:46 PM
Paseclipse's Avatar
Paseclipse Paseclipse is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Jul 2011
Location: So Cal.
Posts: 627
iTrader: 15 / 100%
Default

http://www.guntalk-online.com/2245detailstripping.htm
Reply With Quote
  #7  
Old 01-20-2013, 8:34 AM
wc12 wc12 is offline
Member
 
Join Date: Oct 2010
Location: Ventura County
Posts: 264
iTrader: 1 / 100%
Default

Part A10 (see below) is stuck. It's preventing the bolt from sliding back. Face the gun up and try to re-assemble per manual. A10 should fall between the notch, I had this problem before. Disassembling requires combination of inserting the magazine and pulling the trigger.

http://www.gun-parts.com/ruger/Ruger.jpg
__________________
Damn democrats are turning me into a republican.
Reply With Quote
  #8  
Old 01-20-2013, 8:51 AM
The_Tinman's Avatar
The_Tinman The_Tinman is offline
Member
 
Join Date: Apr 2011
Location: Inland Empire
Posts: 462
iTrader: 13 / 100%
Default

Reminds me of tthe first time I disassembled mine, my uncle warned me that it's something that happens to every mk series owner and if you can figure it out you'll own it for life!
__________________




Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 4:46 AM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2016, Calguns.net an Incorporated Company All Rights Reserved.